Showing posts with label beeswax. Show all posts
Showing posts with label beeswax. Show all posts

Monday, June 10, 2013

Whistle While You Wax



QUESTION: I have quite a few old pieces of furniture, some of which are antiques. I’m never sure what to use to clean and polish them. Can you offer any advice?

ANSWER: You’re not alone. Many people don’t know what type of cleaners and polishers are appropriate for antiques and end up using the wrong thing.

Before you can figure out what type of cleaner and polisher to use on your furniture, you first have to know what sort of finish the maker used on it. The most common finishes found on antique furniture are waxes, oils, shellacs, and varnishes. Not only do these finishes bring out the beauty of the wood's grain and color, but they also protect the wood from moisture and heat changes that can cause shrinking, swelling, crazing, and cracking. Finishes seal the wood pores against dirt and grime, too.

But over the years, wooden furniture dries out and shrinks or expands or warps from too much moisture. Older antiques sat in rooms heated only by a fireplace. If they sat too close to the fire, they dried out—too far away from it, they tended to warp.

In order for a finish to protect the wood, you have to protect the finish. This can be done by cleaning and polishing the finish with either a wax or an oil.

Cleaning furniture is a simple process. Using a solution of Murphy’s Oil Soap or the spray version of it, apply some to a well-wrung-out old washcloth. Rub a small area of the piece at a time and immediately dry it with either paper towels or an old towel. If the piece is particularly grimy, you may have to wash it several times. Be sure not to get the wood too wet and dry each area immediately. After you finish cleaning, let the piece dry thoroughly for 24 hours. For a really bad piece, you can also use one of those green scrubby squares. But don’t rub too hard because you may rub off the finish.

Once your piece is dry, it’s time to apply a new protective coating. The preferred method of protection is a wax since they’re easy to apply and leave a brilliant shine. The best waxes to use are those in paste form. Stay away from Pledge or other so-called spray cleaners and waxes. They apply a film to the surface of furniture which attracts dust like a magnet. Instead, look for products that contain Carnuba wax, a natural substance from a palm tree native to Brazil that’s durable and produces a glossy shine when rubbed vigorously.

Another reliable polish is beeswax, which has been around for many years. A variety of paste and liquid polishes containing beeswax are available.

Minwax Paste Wax, made from petroleum products, is a third alternative. It produces a durable hard shine that lasts up to a year. The more coats you apply, the more waterproof the surface becomes.

Oils such as Tung and linseed have been used for centuries to preserve and polish furniture finishes. They're often mixed with absorption promoters, so they actually sink into the wood pores rather than remaining on top as waxes do. Oils leave a lustrous shine that's softer than a glossy wax shine, and they provide good protection against moisture. However, they do tend to darken the wood slightly over time.

Regardless of which cleaner/polisher you choose—wax, oil, or feeder—always use the same type on a particular piece of furniture. Finish surfaces that are accustomed to one type of cleaner/polisher won't accept another type. For example, an oil applied to a finish that was previously waxed will remain on the wood surface and won't soak in.

How often you need to clean and polish your antiques will depend on a number of variables, such as the type of heating and cooling system in your home, the geographical location, how you use your antiques, and the type of cleaner/polisher you're using.

Generally, you’ll need to apply a paste wax every month or so. To tell if your piece needs another layer of paste wax, buff the old finish with a soft cloth. If this polishing fails to restore shine and smoothness to the finish, it's time for a new coat of wax.

For more specific details on cleaning, check out my previous blog from August 15, 2011.

Monday, October 24, 2011

The Truth About Sadirons



QUESTION: Recently, I purchased an old iron at a local flea market. On the top of the heavy iron base is molded the word “sadiron.” Was this the brand name or a name people called this type of iron?

ANSWER: A flatiron pointed at both ends and having a removable handle is commonly referred to as a sad iron. First used in 1738, it became a regular household item by the mid-18th century and continued in use until the last decade of the 19th.

From research, historians know that the Chinese started pressing cloth using hot metal before anyone else. At the same time, Viking women used simple round linen smoothers made of dark glass along with smoothing boards to iron cloth. Others used hand-size stones which they rubbed over woven cloth to smooth it, polish it, or press it into pleats. And while some may have dampened linen first, it’s unlikely that these women heated their “smoothers.” Later glass smoothers, called slickers, slickstones, or slickenstones, had handles. It wasn’t until the late Middle Ages that blacksmiths began forging smoothing irons, heated by a fire or on a stove, for home use.

People began to call these flat smoothing irons “sad” irons, based on the Old English word “sad” meaning heavy, dense, or solid. Although most of these irons were small, they were very heavy, thus women looked forward to ironing day with some distain, knowing the drudgery it entailed.

On Mondays, women washed both clothes and bedding. They reserved Tuesdays for ironing, a chore that took all day and tired them as much as washing.

At home, ironing traditional fabrics without the benefit of electricity was a hot, arduous job. Women had to keep their sadirons immaculately clean, sand-papered, and polished. They also had to keep them away from fireplaces to avoid getting soot on them and had to regularly grease them lightly to avoid having them rust. Beeswax, applied to the underside of an iron, prevented it from sticking to starched cloth.

Women needed to own at least two irons—one for ironing and one for re-heating—to make the sadiron system work well. Large Victorian households with servants often had a special ironing-stove on which to heat the irons, fitted with slots for several irons and a place to set a water jug on top.

With no way to control temperature, women had to constantly test to see if their iron was hot enough by spitting on its heated underside. They learned the right temperature by experience—hot enough to smooth the cloth but not so hot as to scorch it. So they wouldn’t burn their hands, they had to grip the handles of their irons with a thick rag.

On April 4,1871, an enterprising women named Mary Potts of Ottumwa, Iowa (Yes, that’s right, the place where the fictional character, Radar O-Rielly, hailed from on the hit T.V. series, “M.A.S.H.”), received a U.S. patent for a lighter sadiron with a detachable wooden handle, which remained cool while ironing. Women could purchase several iron bases which could all be heating on the stove while she ironed. Women loved the idea.

She received another patent for an iron with a hollow body which could be filled with a material that didn’t conduct heat, such as plaster of Paris, clay or cement. In her patent, Mrs. Potts claimed that these materials held the heat longer so that women could iron more garments without reheating their as often.

Mrs. Potts exhibited her new sadiron in the 1876 Centennial Exhibition in Philadelphia. She prominently featured her picture in advertising for her new iron.