Windmill Folk Art

QUESTION: My mom has had an unusual sculpture in her garden for some years now. It’s a cast-iron rooster that looks like it may have been painted at one time. The thing is darn heavy, so no one has moved it for a long time. It seems to be attached to a concrete block. Can you tell me anything about it?

ANSWER: It sounds like your mom has a windmill counterbalance weight in her garden. If it weren’t for their appeal as folk art, these delightful oddies probably wouldn’t be as highly collectible as they are today. The windmill weight is a key component of the vaneless windmill produced in the late 19th and early 20th centuries.

Counterbalance weights were part of a short-lived but stylish variation of tail technology in windmill production. The Halladay Standard windmill, manufactured by the U.S. Wind Engine & Pump Company  (USWE) of Batavia, Illinois, was the first manufacturer to employ a patented self-regulating wheel that would place itself in or out of sail depending on the strength of the wind. This “folding” mill was first developed in 1854 with a wooden vane that attached to a wooden tail.

In the 1880s, USWE introduced a vaneless version of the Halladay Standard. The Vaneless Standard utilized a star-shaped counterbalance weight instead of a tail. The company produced this mill until 1916 while other companies produced their own versions with different styles of weights into the 1930s. Generally, windmill manufacturers only used counterbalance weights on folding wheel windmills. When electricity came to the re-mote areas of the Dakotas, Oklahoma, Kansas, Nebraska, and Iowa, windmills became obsolete.

Windmill makers cast the iron weights in the form of horses, roosters, bulls, squirrels, or rabbits. These
weights measure from 9 to 18 inches high and from 6 to 12 inches wide. And they can weigh as much as 100 pounds. Lighter ones, meant to be filled with scrap metal, were hollow cast. The bigger the mill, the heavier the weight. It all depended on the diameter of the wheel.

Although many collectors seek them out as folk art, they’re not really because they weren’t made in limited quantities by untutored rural or small-town craftsmen. Instead, factory workers cast them by the thousands. The Duplex Open Wheel Mill Company of Superior, Wisconsin, and an Elgin, Illinois, firm that produced the Hummer Windmill led the nation in windmill production.

Once known as the Windmill Capital of the World, Batavia, Illinois, was home to six windmill manufacturers—Appleton Mfg. Co., Batavia Wind Mill Co., Challenge Co., Danforth Co., Snow Manufacturing Co., and U.S. Wind Engine & Pump Co.

Weights not only served as a counterbalance but also as a marketing device, often identifying the mill’s manufacturer with an embossed name someplace on it. But basically, the windmill weight just kept the wheel directed into the wind and prevented tower from tipping over.

What distinguishes one weight from another is its shape. Most windmill manufacturers produced weights in their own foundries. Animal shapes were the most common, but weights also represented letters of the alphabet, horseshoes, celestial bodies and spear tips. The Elgin Windmill Company offered the biggest selection of animals, including roosters, chickens and squirrels. Other companies used the horse, bull, eagle or buffalo for weights. Several, like the Elgin squirrel, rooster and chicken, came in various sizes, tailored to the wheel’s size.

Most weights sat atop a base plate, part of a box or ball often made of tin, cast iron or galvanized metal. Others attached directly to an iron bar. The box, plate or ball then attached to a wood beam extending from the windmill engine. Most weights have lost their bases, mostly due to falls. A sudden fall from a 60-foot tower could break off pieces of the weight, such as a horse’s tail or a rooster’s comb.

Of all the windmill weights out there, the Dempster horse and the Elgin rooster are the most reproduced pieces. Since weights are rare and expensive, it’s often difficult to tell an authentic weight from a reproduction.

In recent years prices for windmill weights have increased from $200 to over $1000 for especially unique ones in good condition. Weights should show traces of rust and pitting after having been exposed to weather over the years. Repainting them drastically reduces their value. However, the value of a windmill weight increases if its paint is 50 to 75 years old and shows wear from the weather.

What's All the Fuss About Fans?

QUESTION: I was digging around in my mother’s attic the other day and discovered a flat box containing two very beautiful fans. I imagine these must have belonged to her mother or grandmother. What can you tell me about them? Do they have any value?

ANSWER: Fans have been around for a very long time. As a piece of functional art, they go back as far as ancient Egypt. The Egyptians saw them as sacred instruments used in religious ceremonies. They also became a symbol of royal power. But it was the Chinese who evolved the fan into a complex, decorated instrument. The Japanese took the fan one step further and produced a folding version, supposedly based on the folding wings of a bat. When Marco Polo returned to Venice, he brought with him fans made of vellum, paper, swan skin with blades of gold, silver, and inlaid mother-of-pearl.

The original purpose of hand fans was to create a breeze, but they had many other uses. They could be used as protection against rain, as a tray for offering or receiving refreshments, and to hide bad teeth. European women would use fans to hide their faces during mass.

By the 18th century, the folding fan had come into its own in Paris. Delicately hand-painted floral motifs, on a structure of decorative sticks, came into common use. In fact, any wealthy lady worth her salt had to have fans as accessories to her wardrobe.

These wealthy women developed a whole language of salutations and signals around their fans. For instance, carrying a fan in the left hand signified "desirous of acquaintance" while allowing it to rest on the right cheek meant "yes" and on the left "no." Drawing a fan across the forehead meant "We are watched" and drawing a fan across the eyes meant "I am sorry." Opening a fan wide meant "wait for me." Dropping a fan meant "We could be friends." If a lady fluttered her fan, it meant “I am married.” But if she placed the handle of her fan to her lips, it meant "kiss me."  An open fan held in the right hand in front of the face—the ultimate form of seduction—meant "follow me"

The blades of these delicate instruments could be of carved ivory or tortoise shell inlaid with precious inlaid metals and elaborate jewels. Less expensive fan sticks were usually of sandalwood or fruitwood. These rococo fans were the finest ever made, and many fo the designs took the form of stylized art.

By the latter part of the 18th century, fans had gained popularity as a fashion accessory in the upper circles of American society. While fan makers imported finer sticks, they made their own wooden ones.

The earliest fans made in any large quantity in the United States were paper souvenir fans depicting historical scenes. as well as current events. Lithographers portrayed views of New York's Crystal Palace, 1853, the Philadelphia Centennial in 1876, printed in black on a cream background, and the World's Columbia Exposition in 1893.

By the late 19th century, fans displayed images of nearly every product. Every department store and every manufacturer advertised on fans, including such products as coffee, milk, bread, carpet sweepers, restaurants, cafes, theaters, sewing machines, etc.

Before the advent of air-conditioning, funeral parlors gave out fans t mourners. These were as much to keep mourners cooler in warm weather as they were to wave the stink of the corpse away. These mourning fans became a social necessity. Manufacturers often fashioned them in black materials to coincide with the black clothing worn during recognized periods of mourning. Of course, it didn't hurt to print the name and address of the mortician on the guards of a cheap wood fan.

Fans are still relatively inexpensive—except the jewel-encrusted ones—so they’re ideal to collect, especially for the novice collector. Many sell for $5-$20 online. Some of the most sought after fans came from the E.S. Hunt Company, later called the Allen Fan Company. In 1868, Hunt patented the process by which he assembled the fan sticks and the fan leaf in one step. This included folding or creasing and gluing the leaf to the fan sticks at the same time under pressure. This was America's first fan to appear and unfortunately folded, like its fans, in1910. 

A Longing for the Past

QUESTION: I’m looking for information about a chair that belongs to my sister. What can you tell me about it and who might be the maker?

ANSWER: Your sister’s chair belongs to the Colonial Revival furniture style, the longest-lasting continuous style movement in American history. Ushered in by the Centennial Exposition in 1876 which spawned an awakening of interest in what American furniture had looked like 100 years before. The publicity and preparations for the Exposition, as well as the financial difficulties of 1873, prompted Americans to look fondly back to the early history and events of the nation and long for the perceived security and comfort of those earlier times.

Ironically, there were no antiques or reproductions on display at the Centennial Exposition other than one small exhibit featuring a Colonial kitchen and few personal items belonging to George Washington including his favorite elm chair which was a reproduction.

Those who could afford it wanted to surround themselves with articles from America’s Colonial Period while at the same time attaching an enhanced importance to its history, integrity, and value. But there were many more Victorians wanting Colonial antiques than there were real ones on the market. In 1877, Clarence Cook, an interior designer of the time, published a book entitled, The House Beautiful, in which he stated that if people couldn’t obtain real antiques for their homes, fine reproductions would do just as well.

This revival of interest in Colonial American furniture coincided with the advent of the Arts and Crafts Movement, a return to basic craftsmanship and honesty in construction techniques espoused by William Morris, Charles Eastlake and Elbert Hubbard.

Colonial Revival depends not so much on the actual style reproduced as on the interpretation of the style and the combination of stylistic elements. The original cabinetmakers and furniture companies that made Colonial Revival pieces catered mostly to the carriage trade, the upper crust, many of whom had real antiques in their homes. Most historians believe that furniture makers began copying Colonial pieces soon after the Philadelphia Exposition in 1876. But, in fact, some began long before that as the Colonial Period came to a close with the deaths of the last surviving founding fathers.        

Smith Ely, a New York cabinetmaker working from 1827 to 1832, made what’s believed to be the first Colonial Revival piece—a cane-backed chair. As the 19th century progressed, a number of companies such as Sypher & Company of New York and Potthast Brothers of Baltimore produced authentic reproductions of 18th-century items, often handmade rather than made on an assembly line.

Then along came Hollis Baker, son of Siebe Baker, the Dutch immigrant who founded the firm of Cook and Baker in 1893 in Holland, near Grand Rapids, Michigan. By 1925, Hollis Baker was the president of the company, now called Baker & Company. With a keen interest in handcrafted 18th-century furniture, Baker realized that whoever could solve the problem of combining the quality of handcrafted furniture with the practicalities of mass production would be successful.

Recognizing an opportunity, Baker & Company introduced a line of American reproduction furniture in 1922, a Duncan Phyfe suite in 1923, and furniture based on Pilgrim styling in 1926. In 1927, the company again changed its name to Baker Furniture Factories, specializing in high-quality, faithfully executed reproductions. A line of Georgian mahogany furniture called the “Old World Collection” appeared in 1931, and the following year the company opened the Manor House in New York City to produce top-of-the-line, handmade reproductions, faithful down to the dovetailing, hardware, and finishing.

Later in the 19th century, Ernest Hagen specialized in Duncan Phyfe federal furniture. He and a partner opened a shop in New York to make copies of pieces for clients who wanted the look but not the expense of real antiques.  Museum curators in the decorative arts credit him with reviving Phyfe’s reputation in the 19th century.

Nathan Margolis established a cabinetmaker’s shop in Hartford, Connecticut that lasted for 91 years.  A Lithuanian immigrant, he started his business in 1893 and became well known for his faithful copies of furniture originally made by Eliphalet Chapin, an 18th-century Connecticut cabinetmaker. His son Harold took eventually took over the business, continuing it until 1984.

Margolis not only reproduced old pieces but also adapted them to modern uses. In the 1950s, he produced the double dresser, a style known in Colonial days as the chest on chest, by doubling the width and lowering the height of the traditional Connecticut chest of drawers.

Wallace Nutting, a great proponent of preserving America’s Colonial past, had Windsor chairs made in the Colonial Revival style. During the 1920s and 1930s, he hired cabinetmakers to turn out reproductions which he marketed through catalogs. These chairs contained elements borrowed from a variety of styles. Nutting’s cabinetmakers also used woods that would have never been used for the originals, plus their shellac finish was historically inaccurate. Consumers loved them and soon other furniture manufacturers started making them.

The Dodge Furniture Company of Manchester and J. Sanger Atwill of Lynn, both in Massachusetts, Edwin Simons of Hartford, Connecticut., and Jesse W. Bair of Hamover, Pennsylvania. were some of the other makers of Colonial Revival pieces.

Then of course came the factory induced mutations designed by engineers of the 1920s through the 1950s that have given the term "Colonial Revival" such a bad name. These cheap knock-offs, called “period” pieces, began appearing in thousands of American homes. Bedroom and dining room sets became the most popular ensembles purchased by many a post-war bride and groom.

‘Tis the Season for Cranberry

QUESTION: Every year at Thanksgiving, I bring out a set of eight sparkling pink glasses that used to be belong to my great-grandmother. They seem so festive and add a holiday note to our dining table. Can you tell me anything about these glasses?

ANSWER: Your glasses are made of cranberry glass, a very special type of glass favored by Victorian hostesses, especially around the holidays. Not only is this glass appropriate for the Thanksgiving and Christmas holidays, but it’s also a popular collectible. In fact, some pieces are worth too much to be used for fear of breakage.

Although glassblowers had been making colored glass since ancient Egypt, it was Johann Kunckel, a 17th-century German chemist from Potsdam, who came up with the red color by adding gold chloride to the clear crystal. During the 19th century, English and American glassblowers experimented with adding less gold choride, resulting in a pink glass which the Americans called “cranberry.”

And thanks to the virtuosity of these glassblowers there seems to be an endless variety of shapes and patterns of this glass on the market. In addition to tumblers and water pitchers, there are salt cellars, sugar shakers, cruets, jars, jugs, decanters, celery vases and finger bowls. Among the widely used patterns are "Swirl," "Coin Dot," and "Daisy & Fern." Some of the most rare and expensive items found from this time period are beautiful lamps and other lighting fixtures.
           
As with any collectible, cranberry glass can also be an investment. Pieces that sold for less than ten dollars a generation ago are now worth hundreds of dollars. Because of the natural fragility of glass, antique cranberry glass has become relatively scarce, though it does turn up in thrift and antique shops,  flea markets, and auctions.           

Although cranberry glass had peaked in popularity by the end of the 19th century, manufacturers produced it in quantity through the 1930s. The last two companies to make this unique glass—The Pilgrim Glass Corporation and Fenton Art Glass —went out of business early this century. Pilgrim Glass Company produced beautiful blown cranberry glass ranging from various vases and baskets to candle holders and sold them in department stores and gift shops around the country until 2001. At the time if the company's closing, cranberry was its most popular type of glass. Fenton Art Glass marketed new cranberry glass, featuring opalescent decoration with coin dots, daisy patterns and numerous other styles, through retailers around the country until it closed in 2011.

Cranberry glass has always been made in craft production rather than in large quantities, due to the high cost of the gold and the delicate mixing process required. Glassmakers dissolve the gold chloride in a solution of nitric acid and hydrochloric acid, known as “aqua regia.” Gold in the batch reacts with intense heat to create the beautiful cranberry color. A glassworker called a “caser” attaches a “bud” of this glass mixture to a blowpipe. Then the glassblower stands on a platform with the mold below his feet and blows the molten glass into the mold to create the desired shape. Afterwards, another glassworker places the piece in a “lehr” or annealing oven where it slowly cools to room temperature. Most cranberry pieces are hand blown or molded and often contain small bubbles and striations.

It's All in the Cards

QUESTION: I recently purchased a scrapbook full of brightly colored cards displaying advertisements for various products. Can you tell me about these types of cards and about how old they might be?

ANSWER: You seem to have stumbled on a scrapbook full of advertising trade cards. While
T.V.  commercials, as well as magazine and Internet ads  promote everything from cars and medicines to food products, during the latter part of the 19th century, trade cards did the selling.

In the 1890s, manufacturers focused their advertising efforts nationwide. Although the Industrial Revolution gave them the know-how to mass-produce consumer goods, they needed a way to show off their new products. At the time, magazines were just beginning to show ads. A new inexpensive method of color printing called chromolithography appeared in the 1870s and paved the way for trade cards. Reproduced by the millions, these colorful handouts flooded the country, becoming at once an effective business device, as well as folk art. Companies mailed them. Merchants gave them to their customers. Traveling salesmen distributed them door to door. And consumers saved them, often trading them with friends.

Although most were about the size of a playing card, others measured up to 3 x 5 inches. The typical card featured a colorful picture on one side and a sales pitch on the other. Frequently, the manufacturer left a blank space for a merchant to add his name and address.

The most common trade cards are flat pieces of colorful cardboard, however even more popular are die-cut cards—those cut in the shapes of the objects they advertise. Particular favorites include such varied subjects as pickles or teacups. Some are two-sided, with a different scene on either side, each of which promotes one of the company's products. Others fold or have movable parts.

Metamorphic cards have flaps that fold out to reveal pictures different from those seen when closed. Some cards encourage the viewer to open the flap to discover what happens next. One titillating card pictures a woman sitting in a bathtub with her knees visible. When opened, the card reveals her serving drinks to two bald men.

Cards with movable parts are fragile and often in poor condition. Unfortunately, few of these cards with all their parts intact have survived decades of wear and tear. Hold-to-light or see-through cards are even more fragile. The picture changes or words come into view when the card is held up to the light, completing the advertisement.

At the Philadelphia Exposition of 1876, manufacturers put thousands of these bright little pasteboard salesmen into the hands of a product hungry public. Grocers handed them out for every imaginable product, from soup to soap! Manufacturers inserted some cards right into packaging. People saved the cards with a passion, pasting them into scrapbooks.

As their popularity grew, trade cards evolved into trading cards which manufacturers frequently packaged as serialized premiums in products such as cigarettes and coffee. Arbuckles' Coffee, for example, offered  a 50-card series of states and territories.

Some of the products most heavily advertised by trade cards, included those involving medicines, food, tobacco, clothing, household goods, sewing items, stoves, and farming tools. Two of the most popular categories were medicine and tobacco. In the late 19th century, claims made for patent medicines weren’t  regulated by law, and trade cards advertising these medicines often promised miraculous results.

Tobacco companies inserted trade cards into cigarette packs as stiffeners to protect the contents. Allen and Ginter in the U.S. in 1886, and British company W.D. & H.O. Wills in 1888, were the first tobacco companies to print advertisements. Several years later, colorful lithographic illustrations began to appear on these cards which featured a variety of topics ranging from sports to nature. By 1900, over 300 tobacco companies produced thousands of tobacco card sets. Children would often stand outside of stores to ask customers who bought cigarettes if they might give them the trade cards in their packs. By the 1950s, trading cards boy began to collect sports, military, and automobile cards contained in packs of bubble gum.

The popularity of trade cards peaked around 1890, and then almost completely faded by the early 1900s when other forms of advertising in color, such as magazines, became more cost effective.
The more common antique trade cards sell for about $1 to $15, depending on quality and condition.

A Word to the Wise

QUESTION: I collect teapots. Recently, I purchased a small one on which is hand-painted a saying, “Actions speak louder than words,” with a picture of a cottage on the other side. The mark on the bottom just says “Made in England.” Can you tell me anything about this teapot?

ANSWER: It seems you’ve stumbled on a piece of Torquay pottery, specifically Torquay Motto Ware.

Torquay is the generic name given to 20 potteries centered around the popular seaside resort of the same name in South Devon, England, that made red earthenware with slip decoration in the form of a picture. Many also sported brief sayings on them, thus the name Motto Ware. Of these potteries, Watcombe, Royal Torquay Pottery, Aller Vale, Longpark, Lemon & Crute, Torquay Terra-Cotta Company, and St. Marychurch are the most well-known.

The designs on the Motto Ware often depict cottages, flowers, animals, boats, and windmills. While the Torquay potteries produced these mainly as souvenirs, not all were souvenirs of Devon. 

In 1867, G.J. Allen discovered dark red clay around the town of Torquay. He had it chemically analyzed and found out that it exceptional for producing earthenware. He built a pottery which he named the Watcombe Terra Cotta Clay Company. Other potters soon followed suit and opened their own pottery works in the area. In 1897 the Aller Vale Company acquired the larger Watcombe Pottery, making Watcombe the largest of the pottery producers.

They began by making art pottery—classical vases and busts—popular with Victorians at the time. But as the demand for these pieces declined towards the end of the 19th century, they had to adjust and adapt or go out of business. Victorians loved to travel and bring back small items as souvenirs of their adventures, so the potteries began making stylized souvenirs for this new market.

Torquay pottery followed a number of themes, including the subject matter of cottages, place names,  florals, animals, and sometimes grotesque images. They also came in a variety of decorative styles—faience, barbotine, terracotta, and molded cottages. This allows collectors to assemble groupings by subject and/or style, and many of them seek out pots by specific decorators or potteries.

Motto Ware didn’t start in Torquay. It had been around for some time. In fact, the Romans often inscribed their pots with humorous sayings. There seems to be an endless number of mottos on Torquay pots, some are pearls of wisdom, others are humourous, and still others are classical quotations. Some potters even inscribed personal messages for their customers. Companies soon discovered that household items with mottoes on them sold best.

After forming basic shapes on the potter's wheel or in molds and allowing the clay to harden, workers dipped each piece into slip, a creamy mixture of white clay and water. After the slip set, artists hand-decorated each piece, using a nail to scratch proverbs or folksy sayings through the slip to the red clay, a technique known as sgraffito. They then fired the pieces in kilns, allowed them to cool, then glazed and re-fired them. Artists, paid by the piece, worked feverishly, engraving mottoes on up to seven dozen pieces an hour.

The earliest Torquay Motto Wares have a rustic individuality, with mottoes scrawled in childlike handwriting.  Besides famous quotations, motos also were humorous, such as “ "A hair on the head Is worth two on the chin," seen on a shaving mug. Some were a play on words, like this one: "A car on the road is worth two in the ditch.” Even Shakespeare didn’t escape Motto Ware. "The night is long that never finds a day," is a quote from his play “Macbeth.” While early Motto Ware had inscriptions written in normal English, companies later used an exaggerated Devonshire dialect to appeal to the tourist trade.

Today, collectors seek sugar bowls and creamers, teapots, jugs, candlesticks, perfume bottles, cookie jars, tobacco jars, vases, plates, and children's dishes in prices ranging from $2 to $500, depending on the item’s condition. Advertising and commemorative wares, featuring the name of a hotel, city, or special occasion, are especially popular.

The Drink of the Gods

QUESTION: I recently purchased what looks like a porcelain coffee pot. However, it has a decorative spout that has what seems like a bridge across its top. The floral design is delicately painted and on the bottom is stamped the name R.S. Prussia. Can you tell me anything about this piece?

ANSWER: What looks like a coffee pot is actually a chocolate pot, used by Victorians to serve hot chocolate on cold winter days.

By the mid-17th century, chocolate was well established and sought after by the well-to-do in Italy, France, Germany, and finally England. From the time Spanish explorers brought chocolate back to Europe, people served chocolate hot, making it more palatable by the addition of sugar, vanilla and jazmine. Since chocolate was expensive, only the wealthy could afford this exotic drink.

Mechanization during the Industrial Revolution made processing of cacao beans more efficient and brought down labor costs. A Dutch chemist, Coenraad Van Houten patented a process that defatted and alkalinized the chocolate in 1828, making possible the mass production of cheap chocolate in powdered and solid forms. 

As chocolate's popularity spread throughout the Continent, people needed vessels to serve it. Chocolate pots began to appear in a variety of forms and materials, including earthenware, tin, pewter, tin-plated copper, porcelain, gold, and silver.

Potters created the first commercial chocolate pots of earthenware, but by the early 19th century, porcelain ones began to appear, coinciding with the decrease in the cost of chocolate and its availability to everyone, regardless of their economic status. At the same time the porcelain chocolate pot changed. Since the cocoa made from the cacao bean dissolved in hot water, whipping the chocolate was no longer necessary, so the hole for the molinet—the wooden stirrer—originally placed in the lid of the pot was no longer needed. By the mid- to late 19th century, most porcelain companies produced chocolate pots with solid lids.

Factories began producing a variety of affordable chocolate pots for the average household. Production peaked in the mid-to late 1800s, but continued until the mid- 1900s when people’s preference switched from hot chocolate to coffee.

Due to the widespread popularity of hot chocolate, chocolate pots are readily available to collectors, both online and at shows and auctions. For example, eBay has over 500 chocolate pots listed in active auctions. Prices vary widely and depend on material, with silver pots being more expensive than porcelain pots. Value also depends on the age and maker, as well as where the pot is being sold.

While the average porcelain chocolate pot sells for about $100, the higher quality ones from Meissen and R.S. Prussia range in price from $500 to $5,000. Chocolate sets—a pot with six tall cups and sometimes saucers—tend to sell for more than individual pots. Also, larger pots and those with floral or scenic designs are more expensive than smaller ones without decoration. Unmarked pots and those from lesser-known factories often sell for less than $100.

Before starting a chocolate pot collection, examine a variety of chocolate pots being offered by reputable dealers. Read books on specific manufacturers such as Limoges; R.S.Prussia. and Nippon, and visit repronews.com, e-limoges.com and rsprussia.com online. Lastly, if you’re not sure of a chocolate pot's authenticity, don't buy it.

The Enduring Beauty of Lace

QUESTION: Recently, I was going through an old trunk in my grandmother’s attic and discovered several beautiful old lace tablecloths. One of them had a label which read “Quaker Lace Co.” Can you tell me anything about this company and whether these old tablecloths are worth anything?

ANSWER: In the past decade or so, vintage linens have gained in popularity. Fine old lace ones are in rather high demand, as people seek to bring back the nostalgic beauty of bygone eras.

Finely patterned handmade lace has been available for centuries. However, lace tablecloths have only been used since the latter part of the 19th century, after the invention of mechanical lace-making looms. Traditionally, making lace by hand was a labor intensive process, but with the mechanical looms, it became possible to produce lace wide enough for tablecloths.

Taking care of fine lace tablecloths required extra help, so when domestic servants began to disappear from middle-class homes, so, too, did high- maintenance lace linens. But a new generation of housekeepers have discovered the beauty and elegance of lace. They tend to use fine lace tablecloths to dress up their dinner tables for special occasions.

While many of these fine old pieces were handmade and can cost hundreds and sometimes thousands of dollars, others were mechanically produced by companies such as the Quaker Lace Company of Philadelphia. Those produced by the company from 1880 to about 1913 are highly desired by collectors. To collectors, it doesn’t matter whether a lace tablecloth is handmade or machine-made or simple or ornate. Vintage Quaker Lace pieces sell for $10 to $200, with the average price being around $60-100 for a large tablecloth big enough to fit a table for 12.

Originally founded in 1889 as the Bromley Manufacturing Company by the three sons of John Bromley, an English carpet maker who came to the United Sates in the 1840s and became successful in textiles. The Bromley brothers used the profits from their carpet manufacturing business to purchase looms from Nottingham, England to produce machine-made lace. In 1894, the Bromley brothers purchased a factory on 4th Street and Lehigh Avenue in Philadelphia, and renamed their company Lehigh Manufacturing. A bit later, they opened a second factory on 22nd Street and Lehigh Avenue. In 1911 they renamed their operation once again the Quaker Lace Company.

Quaker Lace became the leader in machine-made lace. Their lace was durable, resisted stretching and pulling, and could withstand washing without losing its shape or transparency. In 1987 they closed their  4th Street factory, but continued to produce tablecloths at plants in Lionville, Pennsylvania, and Winthrop, Maine. The company continually researched and invented new ways of chemically treating their lace so that it would maintain its shape. The Bromleys sold their tablecloths mainly in department stores, but when many of them began to close, the company’s profits declined. The company had to  declare bankruptcy in 1992. Lorraine Linens purchased the patterns and Quaker Lace name and  continued to manufacture lace tablecloths until 2007 when it, too, filed for bankruptcy.