Monday, February 2, 2015

Cottage Charm



QUESTION: I have a cabinet that seems to be handmade. One of its drawers has three compartments side by side and one in the back for silverware. The other drawer doesn’t have compartments but does have slots cut into it as if there were slats at one time. There are three shelves in the base of the cabinet. What I am curious about is the fact that the top slants to the back. At first I thought it was the way it was sitting, but after moving it several times I noticed that it’s made that way. The top narrows slightly at the sides from front to back. I have never come across anything like this and was wondering if there was a reason behind the slanting or if someone just had poor craftsmanship! I appreciate any information you can offer.

ANSWER: What you have is a Victorian sideboard. This style is known as Cottage Victorian. Sideboards had been around since the 16th century. They were made to serve food and hold table linens, serving pieces, and flatware. In smaller Victorian cottages, there wasn’t a lot of room. Many didn’t have a formal dining room, but just a dining area in the parlor. So that’s why your sideboard is smaller than normal. Usually, the makers of these pieces painted them in bright colors, often adding  colorful floral decorations. While your sideboard could have been homemade, I doubt it. It may have been altered, however, to stand straight on a slightly slanted floor, thus the slanted top. Unfortunately, the hardware on your sideboard isn’t original. Most of the time, Cottage Victorian furniture had simple wooden knobs and handles.

Cottage furniture became popular in the United States, particularly along the East Coast, after the Civil War. Pieces began appearing in workshops and then homes of the wealthy in places like Martha's Vineyard, Cape May, and the Berkshires. But the popularity of these items didn’t  remain exclusively with the upper class. As the middle class grew, equally elegant, but relatively reasonably priced versions began to appear in the homes of the nation’s growing work force, particularly in Pennsylvania and New England.

Homeowners purchased Victorian Cottage furniture in mostly bedroom "suites", sold as  coordinating groupings consisting of a double bed, a washstand, a dresser or vanity with an attached mirror, a small table, a straight chair and a rocker, and often a wardrobe. Cabinetmakers used pine or other inexpensive wood, then painted the entire piece with  several layers of paint. The finished sets were colorful and whimsical.

Cottage Victorian beds have high and lavishly decorated headboards. Finials and medallions constituted what little carving there was on most pieces. Most of the decoration took the form of painted flowers, fruit, and other plants, featuring a large painted bouquet-like medallion in a central panel on the headboard and a smaller, matching one on the foot-board. Local cabinetmakers, most of whom didn’t have any formal training, built these pieces from designs in pattern books. And since they had no formal art training, the decorative elements they applied to their pieces had a primitive, folk art feel to them. A few featured highly detailed and beautifully executed scenes of sailing ships or local wildlife. They painted all the pieces of a furniture suite with the same motif. The most popular base colors were tan, blues, greens, and pinks. A few rare ones use the varnished natural wood as the background onto which the cabinetmaker applied the decorative designs.

An artisan then painted it with a base of soft yellow, and highlighted this coat with green bordering, and rows of flowers, and spandrel fan designs in the corners, giving it vigor. Although such a piece was commonplace once, it’s rare and valuable today. One of the biggest misconceptions regarding antiques is that 19th-century homeowners loved the appearance of natural woods in their furnishings. That preference didn’t appear until the early 20th century. As a result, most painted furniture has been stripped and finished to the often not so beautiful bare wood by well-meaning dealers and collectors. Although cabinetmakers refrained from painting their costly mahogany and walnut pieces, those in small towns and villages paint-decorated nearly all their birch, maple, oak, pine, and poplar furnishings to brighten their customers’ dark, oil-lamp lit homes.

Cabinetmakers fitted drawers and cabinet doors with wooden knobs instead of metal hardware. Even the boldly colored paint, didn’t have the look of value to it. Those pieces of Victorian Cottage furniture that have survived intact usually have a crackled surface from age-shrinkage, with flakes in spots due from dryness. Also, look for signs of wear on edges, tops, and near the knobs.

To the untrained eye, Victorian Cottage furniture looks as if it should be sold as junk or stripped to the bare wood. Whatever you do, don't strip your sideboard. If possible, get an opinion from someone who knows painted furniture.

When purchasing painted Cottage Victorian furniture, look for a bone dry surface, subtle wear, and age crazing that has shrunk geometrically. Fortunately, those who fake antiques haven't figured out a way to create spider-web-like lines with chemicals. Good painted furniture has charm and an integrity that makes it one of today's best antique investments since painted pieces haven’t been reproduced. .




Tuesday, January 27, 2015

The Other Arts and Crafts Designer



QUESTION: I have a Mission chair that has been in my family for decades. I never paid much attention to it. But recently when I was cleaning it, I turned it over and noticed a label under the arm of the chair which reads, "Limberts Arts and Crafts Furniture/Trademark/Made in Grand Rapids and Holland.” I know that Grand Rapids is in Michigan, but did this company also make furniture in the Netherlands? And just who is Limbert?

ANSWER: Charles Limbert made what you call “Mission” furniture in Grand Rapids and Holland, Michigan. In fact, his furniture wasn’t constructed in the Mission Oak style, which actually was a style of Arts and Crafts furniture that developed just before the turn-of-the-20th century.  This wasn’t as much of a style as what manufacturers called furniture made of oak that featured simple horizontal and vertical lines and flat panels that accentuate the grain of the wood. It was supposed to emulate furniture of the Spanish missions in California and Texas. What Charles Limbert made was furniture in the pure Arts and Crafts style.

The Arts and Crafts Movement in America originated in mid-19th-century England where the teachings of John Ruskin and William Morris popularized social reform. The movement began as a revolt against the Industrial Revolution and the dehumanization of the workers being replaced by machines. Americans learned about this movement through Gustav Stickley's magazine The Craftsman. Hand craftsmanship and a return to simplicity became hallmarks of the movement. These ideals applied not only to the lifestyle of the follower, but also to furniture and accessories in the home.

Hailed as the beginning of Modernism in the United States, Arts and Crafts interiors were in direct contrast to the preceding Victorian period of ornate decorative arts. Rectilinear forms of quartersawn oak replaced ornately carved rosewood and mahogany Victorian furniture. Mortise and tenon joints, butterfly keys, and the grain of the wood, itself, became the ornamentation on Arts and Crafts pieces.

While Gustav Stickley is best known as the leader of Arts and Crafts Movement in America, other designers also achieved recognition for their contribution to Arts and Crafts design. One of them was Charles Limbert. His company produced high quality Arts and Crafts furniture, but didn’t attempt to influence consumers about the idealized harmony of the Arts and Crafts lifestyle.

In the early 1880s, Charles Linbert began his furniture manufacturing career at the John A. Colby and Co.. in Chicago. He learned all sides of the furniture business— design, production, and marketing. An 1889 partnership with Philip Klingman established the Limbert and Klingman Chair in Grand Rapids, Michigan. Limbert and Klingman manufactured period reproduction chairs for only two years. In 1894, Limbert formed the C.P. Limbert and Company to produce Arts and Crafts furniture.

By 1906, the company had grown and moved to Holland, Michigan. Limbert called his line of furniture "Holland Dutch Arts and Crafts," most likely in reference to the local Dutch population.

Limbert's early furniture shows influences ranging from Japanese to Gothic. Some of his early china cabinets and bookcases have doors with stained glass in an Art Nouveau style.

His peak of design achievement came during 1904 to 1906 when he introduced many of his cut-out designs. Many of his de-signs were internationally inspired by the Vienna Secessionist School and designers such as Scotsman Charles Rennie Mackintosh and Austrian Josef Hoffmann. Limbert employed designers such as Hungarian architect Paul Horti and father and son Austrian designers, Louis and William J. Gohlke.

Limbert promoted his furniture as being "essentially the result of hand labor, with machinery being used where it can be employed to the advantage of the finished article." Like Stickley, he didn’t let machinery control production and emphasized the contribution of skilled craftsmen in his furniture promotions.

He constructed his furniture of quartersawn white oak, with well-executed doweled joints, keyed tenons and splined tabletops. Long, tapering corbels under arms characterize Limbert chairs. Unfortunately, Limbert didn’t extend his wood working quality to the hardware used on his pieces, most of which came from the Grand Rapids Brass Company.

Compared with Stickley's work, Limbert's designs were typically less severe and more visually interesting, usually achieved through the use of cut-outs and other elements inspired by the as English Arts and Crafts Movement and Dutch folk furniture.

His pieces were among the original furnishings of the Old Faithful Inn in Yellowstone National Park. Today, several wash stands remain in the Old House section of the Inn.

Tuesday, January 20, 2015

That's a Crock!



QUESTION: Some time ago I purchased an old crock at an antique show in my area. I believe it holds two gallons and has two hearts and the number “2" painted in blue on the front. The name Sarah Good is incised above the hearts. Can you tell me how old this crock is and what is the significance of the heart design?

ANSWER: Heart decoration was somewhat rare among crocks. Though your crock has a name incised in it isn’t unusual,  that the name is female is. This indicates that this crock may have been a wedding gift, specially made for Sarah Good. After all, a crock in the early to mid-19th century was a piece of kitchen equipment much as a set of canisters is today.

Potters made crocks of American stoneware, which they covered in an alkaline or salt glaze and often decorated using cobalt oxide to produce bright blue designs. Though people often use the term "crock" to describe this type of pottery, the word "crock" wasn’t used at the time these vessels were popular.

Stoneware is a type of pottery that’s  fired to about 1200°C to 1315°C. While it originated in the Rhineland area of Germany in the 15tth century, it became the dominant piece of houseware in America between 1780 and 1890. People relied on American Stoneware as not only a durable, decorative piece of houseware but as a safer alternative to lead-glazed earthenware. The invention of refrigeration caused its decline.

Americans began producing salt-glazed stoneware circa 1720 in Philadelphia, Pennsylvania, and Yorktown, Virginia. By the 1770s, the art of salt-glazed stoneware production had spread to many centers throughout the United States, most notably Manhattan, New York. The Remmey and Crolius families of potters would, by the turn of the 19th century, set the standard for expertly crafted and beautiful stoneware. By 1820, potters in nearly every American city produced stoneware, with those from Baltimore, Maryland, standing out for their excellent craftsmanship.

While salt-glazing is the typical glaze technique seen on American Stoneware, potters employed other glazing methods. They often dipped vessels in Albany Slip, a mixture made from a clay peculiar to the Upper Hudson Region of New York, and when fired, produced a dark brown glaze. They sometimes used this slip as a glaze to coat the inside surface of salt-glazed ware.

While decorated ware was usually adorned using cobalt oxide, American Stoneware potters used other decorative techniques. Incising, a method in which a design of flowering plants, birds, or some other decoration was cut into the leather-hard clay using a stylus, produced detailed, recessed images on the vessels. Potters usually highlighted these in cobalt. They also impressed designs into the leather-hard clay using wooden stamps. Potters occasionally substituted manganese or iron oxide for cobalt oxide to produce brown, instead of blue, decorations on their pieces.

In the last half of the 19th century, potters in New England and New York state began producing stoneware with elaborate figural designs such as deer, dogs, birds, houses, people, historical scenes and other fanciful motifs including elephants and "bathing beauties."

Most stoneware jugs had some sort of decoration on them which covered only a small area. Unlike other pottery, they weren’t decorated all over. Birds and flowers were commonly painted using cobalt-oxide glaze or incised into the surface with a stylus.

More elaborate designs featured chickens standing by a water trough or sprigs of greenery artfully handpainted with cobalt slip. Sometimes the location of the potter appeared on the side of the jar or on its base.

A crock’s decoration can often be a clue to where it was made. A two-gallon jug with a cobalt design of a sailing ship with flag atop the middle of three fasts, a light-house to the right and a group of rocks to te left, indicates that it most likely came from New England.

Potters signed a good bit of their work using their maker’s mark or sometimes incised their signatures in the surface of the jar. Many pieces can be attributed to particular makers based on the cobalt decoration, clay body, form, and such. They marked the gallon capacity of the vessels using numeral stamps or incised or cobalt oxide numbers or hash marks applied freehand.

For the last several years, stoneware prices have been climbing ever higher, especially for the high-end wares. Most stoneware crocks sell for four to six figures, depending on their maker and condition.

Collectors continue to pay premium prices for stoneware decorated with elaborate and unique motifs. Attributed to David Parr Sr. of Baltimore, a circa-1830 six-gallon jar with a cobalt design of a flower basket that covered the entire front of the vessel sold for $13,750 at auction. The back of the jar featured a flowering plant rising' from a mound of earth. The vessel had rim and base chips, as well as several cracks and still sold for a high amount.

The same auction contained a one-gallon stoneware jug showing a house, tree and fence which sold for $10,175. Stamped J. & E. Norton/Bennington, Vermont, buyers liked this circa-1855 jug not only for its cobalt decoration, but also for its small size. Salt-glazed pieces sell for especially high prices. A salt-glazed water cooler brought $10,500 at auction.



Tuesday, January 13, 2015

Vintage I Do



QUESTION: I have in my possession my great-grandmother’s wedding dress and accessories. They have been passed down from mother to daughter since my great-grandmother left them to her daughter. They’re in remarkably good shape, considering that they date from the1890s or perhaps earlier. I’d like to know more about how to care for them and since I have no daughters of my own, where I might donate such vintage clothing. Can you offer me any suggestions?

ANSWER: Vintage clothing has undergone somewhat of a Renaissance. As more and more people got interested in history and antiques through shows like the Antiques Roadshow, naturally attention turned to what people wore back then. Also, the proliferation of consignment shops selling vintage clothing has brought more people in touch with well-preserved older items.

Before looking at where you can learn more about the dress and accessories you have, you should understand the difference between old clothes, vintage clothes, and vintage costumes.

Old clothes are just that. Usually, they’re items that people recycle to charities so that less fortunate people can benefit from them. They can take in any time period, but are usually more recent in age. Vintage clothes, on the other hand, are items in good condition from particular periods of history, such as the 1890s, the 1920s, or the 1950s. And vintage costumes are sets of clothes in a style typical of a particular country or historical period. While vintage clothing can be purchased and worn and accessorized to complement today’s fashion styles, vintage costumes are special and can only be worn on special occasions like fancy dress events or in film or the theater.

One of the best places to learn about vintage clothing is at your local historical society. Often the organization will have a museum in which all sorts of historical objects are on display. Some have extensive vintage clothing and costume collections, but unfortunately, most have limited gallery space, so much of the clothing doesn’t get displayed. Many colleges also have costume collections, depending on the courses they offer. These are often unknown to the public, again because of the lack of exhibition space, staff, money, or interest.

The vintage clothing and costumes are usually donated by area residents. They bring in grandmother's or great-aunt Sarah’s clothes that they discovered when cleaning out her house after she died. The items run the gamut in type and condition. Sometimes they have an interesting story or provenance. Aunt Sarah may have even pinned a note to certain items.

These donations may then sit in the institution’s attic waiting for someone to resurrect and restore them. They present opportunities for a hands-on learning experience with costumes. Volunteering at your local historical society will enable you to to gain access to reference materials and vintage costumes. You can also view, close-up, exquisite workmanship and fabrics not available to the average person.

Even though museum visitors rate costume exhibits as one of the most popular attractions, sadly, some museums have little interest in displaying their costume holdings. At one Massachusetts historic site a visiting costume conservator was horrified to find a gown made by premier Parisian designer Worth stored in a shower stall. The director's reaction to her protests was "Why should I care about a woman's dress?"

While this attitude is common and a reason more costumes aren't on display, it opens the door for those who do care. The advantage of volunteering at an unenlightened institution is that a volunteer working on costumes might have a freer hand there than at an institution where the curator considers every thread sacred.

A few museums organize groups and programs centered around their costumes. These often include special seminars and teas, access to archives and the costume collection, and a newsletter.

These are ideal places to learn how to preserve your vintage wedding items. You’ll learn to wear white cotton gloves, what cleaning methods are best, and about different fabric types and safe storage methods, plus the names of suppliers of conservation supplies, such as acid-free boxes and tissue paper.

If you don't want to get involved in volunteering or groups, but want a close-up look at period clothing, some museums will set up appointments with their curators to see their collections.

And before blindly donating your items, be sure to ask how they’ll be cared for and if they’ll ever be displayed.

Monday, January 5, 2015

Schlock Clocks



QUESTION: I have a clock made by United Metal Goods Manufacturing Company, Inc., in Brooklyn, New York, in the shape of a pirate ship. Can you tell me who made my clock and when? It has three chrome masts, each with three sails, a ship’s wheel containing the clock dial mounted on the front, and a light imbedded in each end. 

ANSWER: Your ship clock is an Art Deco stylized version of a pirate ship, made in the mid-1930s. United Metal Goods Manufacturing Company produced unique and decorative timepieces as well as staple clocks and timepieces, mostly electric with reliable electric motors produced by the Westinghouse Corporation.

The foundation of most of these clocks was a remarkable electric motor and gearing designed by Anthony William Haydon between 1931 and 1939. His power system allowed these clocks to also perform other functions, such as twirling a cowboy's lariat or moving a figure in a graceful Hula. United Metal Goods made an astounding variety of animated clocks by using the Haydon patents.

braham Levy founded the United Clock Company in Brooklyn, New York in 1905. He remained president of the company until his death in 1961.In August of 1968, United bought the inventory, equipment, and tools of the Sessions Clock Company of Forestville, Connecticut, and for a short time marked clocks made at the Sessions factory “Sessions-United.” Eventually, United expanded its operations and became United Metal Goods Manufacturing Company.

The clocks that United Clock Company produced became known as "Carnival” clocks because carnival owners gave them as the "big" prizes at carnival games. Most of the time, however, players were never able to win these clocks because carnival owners often rigged the games. They eventually earned the monicker “schlock” clocks for their tasteless design.

United cast many of its clocks from spelter, a zinc alloy, including its ships clocks. The company offered its clocks in a variety of styles including the banjo clock, leaf sculpture clock, wagon wheel clock, and the traditional wall clock. Mantel clocks included a carriage and horses clock, Statue of Liberty clock, scales of justice clock, and an animated light-up fireplace clock. United also made other styles of clocks for the home including trophy bowling clocks, ship clocks, teddy bear clocks, and train clocks. They even produced pocket watch clocks that hung on the wall or from the ceiling.

These often tasteless clocks became a necessary decorative accessory for mantels in the homes of prosperous young couples in the 1930s and 1940s. The tradition of a ship model on the mantel comes from New England, where older families made much of their wealth in whaling. In that case, the ship model represented a constant reminder of the source of the family wealth. It was natural that the ship model eventually merged with the mantel clock.

As people moved to apartments in the cities, space for the tall clock vanished, leading to the popularity of mantel clocks. Often, manufacturers combined these clocks with figurative elements such as dogs, horses, goddesses, or whatever, limited only by imagination and their bad taste. United Metal Goods produced a long line of cheap, tasteless clocks that have since become cultural icons.




Sunday, December 28, 2014

Sweet, Sweet Santas





QUESTION: I found this old-world German Santa candy container in an antique shop a couple of months ago. He’s made of papier mach  and stands about 6 inches tall. He’s wearing a cone-shaped hat and carries a small Christmas tree. A faint stamp on the bottom says “Made in Germany.” This little Santa comes apart in the middle to reveal a lined interior. Can you tell me more about this little gem?

ANSWER: You have indeed discovered a little Christmas gem. What you have is a Santa candy container made in Germany around the turn-of-the-20th-century. Called a springhead, this little novelty features a Santa wearing a red-flocked coat and a cone-shaped hat. He also carries a small Christmas tree decorated with colored beads.

Of all the holiday decorations produced since the mid-19th century, few remain as cherished as early German Santa Claus candy containers. These handmade characterizations of Father Christmas remain a popular collectible. 

                              
The manufacture of Santa candy containers began in the 1880s. Makers sold them to an eager American market. By the end of the decade, U.S. retailers offered their customers German-made Santas in a variety of sizes and styles.
   
Selling for a mere five cents, these Santas represented old Kris Kringle in snow-covered garb. Sometimes makers added gold tinsel to represent sparkling snow. Santa containers came in a variety of sizes, from five to seven-and-a-half inches tall. Santa, himself, had a finely painted red face and white beard and wore a heavy coat. Other Santas wore felt robes trimmed with lamb's wool or felt. Purple crepe paper sometimes lined the inside of the outfit. Some of the Santas carry a tiny wicker basket at their waist or on their back.

The Germans couldn't make them fast enough. The making of these early candy containers involved eight to ten families, each responsible for different areas of production. One family might fashion the boots, another would create Santa's clothing, while another would add Santa's rabbit-fur beard. But the most important step involved painting the face.

Over the years the details of Santa’s face changed. One of the biggest influences was the poem “A Visit from St. Nicholas,” that portrayed Santa as a jolly old elf with a thick, flowing white beard and a white fur-trimmed suit. The public's impression of Father Christmas as a stern, thin old man changed dramatically in the late 19th century when Thomas Nast began illustrating St. Nick as a fat, jolly elf-like character for Harper's Weekly.

People originally saw St. Nicholas, the patron saint of children, as a gift-giving old man who rode a white horse and gave goodies to children. Father Christmas took the initial image of St. Nicholas and gave it a twist, making him an old bearded man who doled out punishments as well as rewards.

Residents of certain parts of Germany saw Christkindchen, the German Christ child, as a gift giver. The English butchered the pronunciation of the name, so that today he’s popularly known as Kris Kringle. This figure traditionally wore a white robe and a white jeweled crown, traveling the countryside on a mule. He was said to have been accompanied by Pelze Nicol, a boy with a blackened face. Yet even Pelze Nicol developed into his own personality, becoming Belsnickle, a sinister-looking Santa who punished bad children.

Important scientific discoveries have also been incorporated into these Christmas figures, the most notable being the invention of the light bulb. Between1907 and 1910, the Germans made Santa candy containers featuring an electric lantern strapped to Santa's chest. The figure also held a feather tree decorated with three electric bulbs. A battery operated all four lights.

Likewise, Santa's means of transportation hasn't remained static over the years. Some candy containers show Santa on a sheep, donkey or mule, while others had him riding a sleigh made of moss. The Germans crafted log sleighs with the bed of the sleigh large enough to hold both candy and small wooden toys known as Ergebirge.

Where makers placed the candy and dried fruit and how they made them accessible varied from one container to another. Santas also carried different types of baskets. Some simply had a cloth or felt bag for goodies. Some candy containers came in two pieces, having removable heads or a cardboard tube that separated when Santa's legs and torso, enabling them to be pulled apart. Other examples, such as those showing Santa on a chimney, had a plug on the bottom or a paper seal.

Regardless of the type, people gave Santa candy containers mostly as gifts. After the receiver ate the  candy, they used the container as a holiday decoration. Even though people brought out these Santas for the holidays each year, they could be easily damaged not only by overzealous children allowed to play with the Santas, but also by prolonged exposure to sunlight. While children might physically destroy the candy container, the sun did consider-able harm by fading bright-red coats to a light-brown or turning the interior of the garment from purple to blue.

What destroyed the great artistry of German candy containers, however, was competition from foreign countries. By the 1920s the public was more willing to accept plainer-looking Santas, and the Japanese provided them. Although the Japanese based their candy containers on German examples, the fine details soon became too expensive to produce. The public accepted cheaper imitations, trading savings for a loss in quality.

It's that loss of true artistry over the years that makes vintage German-made Santa candy containers so collectible today. Prices begin at about $375 but rarer ones often sell for several thousand dollars.

Tuesday, December 2, 2014

A Little Piece of Home



QUESTION:  Recently I discovered a well-worn copy of the Bible dated 1861 while going through an old trunk left to me by my father. He said it belonged to his father and his father before that. What’s intriguing about this Bible is the inscription inside: “Presented to John C. Gillespie of Carlisle, Pennsylvania, to take with him to the field of battle, June 1, 1861.” Can you tell me why my great grandfather would have had such a Bible and why it has been handed down all these years?

ANSWER: Bibles are often what bind families together, even today. This occurred even more during the 19th century, when each person may have had their own personal copy. But this Bible, I suspect, was special, for it belonged to a Union soldier who fought in the Civil War. It’s something he carried with him into battle and which he kept his entire life, passing it down to future generations, after one of the most traumatic experiences of his life.

The Civil War continues to fascinate generation after generation. And with this fascination comes a desire to own a piece of the war, to hold on to a bit of its history.

A collection of Civil War memorabilia often begins with the purchase of a 25-cent minie ball, picked up as an inexpensive souvenir after touring a battlefield. Other people  become collectors after participating in re-enactments, as they replace reproduction articles with the real thing. Still others, perhaps like yourself, become collectors because descendants have passed down items that they carried into battle.

Collections of Civil War memorabilia can be broken into three general categories. Most collectors focus on weapons. Others specialize in collecting military uniforms, as well as associated items such as buttons, patches, badges, buckles, and hats.

And some collect the personal effects of those who left their homes and fought their neighbors on the battlefields of their own country. It’s often these homely objects that intensify the romantic appeal of this horrific war. Collecting what soldiers carried with them to war provides an intimate glimpse into their lives.

Volunteers, assembled in a short period of time, comprised most of the armies of both of the Union and the Confederacy. Men—or more often boys in their teens—reported for duty with hastily gathered supplies, and there was little uniformity about what they brought from home. Although each state was expected to supply its fighting forces with necessities, it was often the mothers, wives, sisters, a and girlfriends who were responsible for the materials that the soldiers actually brought with them when they reported for duty. As a result, there was a great variety of items included in the soldiers' personal effects.

With little idea of how the war would eventually be fought, new recruits generally overpacked, and soon found it necessary to shed their excess personal belongings as the war stretched on. These early recruits often reported with items intended to create a home away from home. Consequently, silver knives and forks, pincushions, and even embroidered booties found their way into camp. The soldiers didn’t anticipate years of war—early recruits signed up for only a few months—and the ensuing movements resulted in the abandonment of these niceties.

Identifying Civil War personal effects has been made easier because most of the soldiers marked their belongings with their names and regiments.

In addition to the items which soldiers brought from home, camp visitors gave soldiers  gifts of food, towels and soap, blankets, hammocks, tobacco and pipes, and pills. Soldiers traded their watches for some of these items. And even though the typical soldier would have appreciated more useful items, god-fearing visitors often distributed  religious tracts. Some gave soldiers sewing kits called "housewives," with which they spent idle hours mending and repairing their clothing. The soldiers played various games, including a primitive form of baseball, as well as poker and cribbage, chess and checkers, dominoes and marbles, and even bet on dice.

As the war stretched on and soldiers found themselves depleting their personal supplies brought from home, they turned to sutlers to replenish their need. Both Union and Confederate governors granted special permits to these civilian merchants. They accompanied the armies with horse-drawn wagons and sold, often at a great profit, the personal items a soldier would find in his pockets or haversack.

Articles owned by soldiers on either side differed little. Instead, social class and military rank are what determined the kinds of items the men carried,, Wealthier men, especially those with higher military ranks, were more likely to carry finer things, more things, and things not absolutely essential to day-to-day existence. On the other hand, many of the ordinary soldiers were poor men, often farmers, or recent immigrants from Ireland or Germany. Their possessions were far more modest.

One accessory common to most soldiers was a wallet, usually of folded leather, lined in linen and held together with a leather strap. Soldiers carried their money—generally not much, as a private's pay was typically $9 a month—and photographs of those at home in their wallets. Leather wallets in very good condition sell for about $65.

Another item that most soldiers carried into battle was a copy of the Bible. These  pocket-sized books are often found in poor condition today because of the amount of use they received. Inscriptions increase their value.  A typical Civil War Bible sells for about $75.

And they wrote. Soldiers of the Civil War kept extensive diaries, and maintained regular correspondence with friends and loved ones at home. Many of the envelopes they used are of particular note with patriotic scenes depicted on them, as are the many writing implements and accessories. Ordinary soldiers wrote on paper with wooden lead pencils, which they purchased from sutlers for a few cents or received as gifts.
Officers, however, often included writing sets in their holdings. Many carried bottles of ink—glass bottles covered in materials like leather to prevent breakage—and pens which, being made of a breakable material, rested in brass tube-like protective cases. Today, uncut Civil War-issued pencils can be had for $5 to $10, and fancy pens in brass cases bring $45.

Pens weren’t the only things transported in protective cases. Whiskey flasks were often covered in leather and encased in silver or pewter. Collapsible tin or pewter cups rested in little tin cases with snap-on lids. Other personally-supplied mess pieces commonly found include combination knife-fork-spoon utensils and plates.

On a more personal level were the items that soldiers carried in leather toilet kits tucked inside their haversacks. Toiletry items such as toothbrushes, tooth-cleaning powder (little more than baking soda), hand soap and shaving soap, brushes, and  mirrors were often packed in these kits. In many a soldier's pack was at least one straight razor with a bone or ivory handle, even though beards were in style.

Each article tells a story, has a message, is worthwhile keeping. The Civil War is about people. Those who fought it are no longer here to tell us about it. So the next best thing is to collect the items they carried.

Wednesday, November 26, 2014

Setting the Thanksgiving Table



QUESTION: As the holidays approach, I get out my Oneida silver flatware and polish it up for another joyous season. Beginning with Thanksgiving dinner, I use a setting for 12 that’s been in our family for four generations. Except for the classic beauty of this tableware, I know very little about it. Can you please tell me more about Oneida?

ANSWER: The holidays, especially Thanksgiving, are all about traditions in many families. Your use of your Oneida family heirloom is no exception. But Oneida didn’t always make silver flatware. In fact, at one point early in the company’s existence, it made grizzly bear traps.

Oneida, Ltd. actually began as a utopian religious commune in 1848. At that time, there were several such communities that existed in the northeastern United States. Oneida was one of them.

John Humphrey Noyes and his followers founded the Oneida Community in Oneida, New York. Members of this Protestant, religious sect referred to themselves as Perfectionists because they believed that spiritual perfection could be achieved by them in this world. This was a common concept among 19th-century utopian communities. Much like the Shakers, members contributed all their worldly goods to the community when they joined it. The community held all possessions in common, and it provided for everyone's needs. They called this practice "Bible communism.''

But the Oneida Community is best known for its unconventional family arrangements. Members practiced what Noyes called complex marriage—every man was married to every woman, just as every woman was married to every man. Although neighbors surrounding the community saw this as "free love,” the Perfectionists defended complex marriage as noble and unselfish, since all were expected to be loving to each other. It discouraged individual relationships. During its early years, the community also discouraged child bearing, but by 1869 when the community had become more prosperous, its elders selected couples with desirable qualities and encouraged them to bear children. John Humphrey Noyes himself fathered several, including sons who were later very active in the affairs of the future company. Oneida, Ltd.

At first the Perfectionists tried to support themselves by farming and by preserving and selling fruits and vegetables. But this didn’t provide sufficient income, so they branched out into several industrial activities. An 1890s ad offered a booklet which told how the community came to make such interesting and incongruous things as delicious preserved fruits and traps for catching grizzly bears, fine sewing and embroidery silk, d steel chains, and beautiful flatware. Let’s face it, not many silver companies started out making traps for grizzly bears.

By 1877, when the Wallingford, Connecticut, branch of the community started making tin-plated spoons, the original Oneida Community was beginning to break up. In 1879, Noyes moved to Canada and members abandoned the concept of complex marriage. In 1880, the assets of the community were distributed to its members in the form of stock in the newly formed corporation, Oneida Community, Limited, making it one of the earliest joint-stock companies in the United States.

The new company, under the leadership of P.B. Noyes, one of the sons of the founder, first moved its silverplate production to Niagara Falls, New York, and later to Sherill, New York, within walking distance of the original Oneida Community property. It began production of silver-plated flatware and hollow-ware in 1899 using the "Community Plate" mark.

When the community became a corporation, some members found it difficult to adjust to the new business practices and divided into factions, each competing to control the board of directors. But the younger Noyes remained in control and moved the company into manufacturing higher quality wares in sterling silver, including a flatware line called Avalon in 1901. In 1929, it purchased the William A. Rogers Company began producing a lower-quality line of products using that company’s mark. In 1935, the firm changed its name to Oneida, Ltd.

By 1961, Oneida, Ltd. began producing stainless steel flatware. And by the 1980s, Oneida made at least half of all flatware purchased in the United States. At the end of the 20th century, Oneida fell upon tough economic times, becoming the last remaining U.S.-based manufacturer of flatware, knives, forks, and spoons. The resulting economic troubles resulting from 9/11 forced it to close or sell off most of its factories.
It filled for bankruptcy in 2006, and after finally stabilizing, Monomoy Capital Partners, an equity fund based in New York City, acquired it. Today, it services much of the food service industry with both china and flatware.



Tuesday, November 18, 2014

Documenting Your Collections



QUESTION: I’ve been collecting older items for the last 20 years or so. I’ve got several collections of moderately valued antiques, but I have little information on them except my own knowledge. What is the best way to document my collections?

ANSWER: That’s a very good question. Many people enjoy the fun of collecting antiques but don’t take the time to manage their collections. Before you can successfully manage your collections, you have to gather some information on the items in them. And with today’s technology, that’s easier than ever.

Today, more people collect antiques than ever before: Collecting is a personal thing and most people do it for sheer enjoyment. They choose some objects carefully to build or enhance their  collections, acquire others to use everyday, and inherit still others. Each collector treasures each item in their collections, yet many other people don’t understand the appeal or the value of it. But the value of some antiques has been rising steadily over the last decade, so collecting can represent an investment as well. What many collectors lack is a comprehensive record, with supporting documents, of objects they own. As antiques increase in value, it’s important to know about what you own. Even if you don’t think of your prized objects as part of your tangible financial assets, be assured that the IRS, insurance companies, banks, and courts do.

"To document" means to create a record that thoroughly describes an object and which also contains related documents about it, and keep together this record and supporting information on each object.

Some types of documents you already have, or can easily acquire, such as a bill of sale, a note accompanying a gift, a snapshot, a printed description, a program from an exhibit, biographical information on the artist or maker, a description and picture of a similar object perhaps from a newspaper, magazine, or the Internet, a copy of a mark on the object, and others. You can also record the family history related to the object. The objects in specialized  collections— furniture, dolls, quilts, kitchen utensils, guns, tools, even sports and music memorabilia—are prime candidates for documentation. Museums document each object in their collections. So it’s only natural that you should do the same for reasons of insurance, family heritage, preparing for appraisal, certain types of tax benefits, and connoisseurship.

At the very least, you should know what you paid for each object. Some insurance companies require you to put certain valuables, such as jewelry and fine art, on a special schedule. Often they also require an appraisal for the most valuable pieces.

In case of theft, loss or damage by fire, flood or national disasters, you need to prove ownership of any object claimed, and provide descriptions with supporting information in order to be compensated or to help the police identify and recover your stolen valuables. If you cannot do so, you risk loss of compensation in addition to being permanently separated from your treasured object. The more adequate your proof is, the greater the chances that you’ll be satisfied with the compensation you receive. You can spare yourself some of the anguish that comes from experiencing the loss itself, or with an inadequately compensated loss by documenting your objects before the loss occurs. It’s more difficult to document after a loss occurs, and perhaps it cannot be done at all then. You would also be dealing with all the emotions associated with loss of objects, and perhaps your entire home. In your lifetime, expect a possible loss sometime, and prepare for it. Documenting is a great help because it gives you control over the objects in your collections.

Every home has objects of value—whether monetary, sentimental or family-related. Documenting can help you decide which objects you want to give to certain heirs. Recording the provenance and capturing the family history associated with a particular object provides a a more complete picture for yourself and your heirs. Don't neglect to pass on the family stories associated with an object. Don’t depend on those stories being passed down verbally. Write them down. Additionally, family pieces are often carelessly sold or given away because succeeding generations are unaware of their actual or sentimental value. This is often done in the haste to clear a house after a loved one’s death. By documenting, you can assure to some extent that pieces will remain in the family, or at least that someone will make an educated decision before selling or giving away an special object.

If you insure valuable antiques, your insurance company will usually require you to provide them with a professional appraisal. However, not every object in your household needs to be appraised. Documenting can help you decide which objects to have appraised, plus it can also provide the appraiser with valuable information, thus saving time and reducing the cost of the appraisal. The appraisal then becomes part of the documentation on your object.

If you sell an object or give it to a museum or other institution, your documentation can provide detailed information from acquisition to sale or gift, thereby providing you with a factual basis for tax benefits. Museums look upon documentation as a benefit, as it provides valuable family and cultural history about your object for its visitors.

Documenting is a part of connoisseurship, or caring for your collection, thus enhancing your and others' enjoyment of it. You care for your objects by learning how to clean, store, display, or use them, by assuring certain temperatures, or keeping certain objects from direct sunlight. By continuing to learn more about the objects you like to collect, you’ll enhance your enjoyment of your collections.

Wednesday, November 12, 2014

The Gleam of Brilliant Glass



QUESTION: My mother loved cut glass. She once had an extensive collection, but sold much of it later in life. One piece, however, did manage to survive and now I have it. It’s a six-inch round,  shallow dish, with a flat bottom and sloping sides and a circular handle. Etched on the bottom is the name J. Hoare & Co. 1853. What can you tell me about this piece?

ANSWER: You have what’s commonly referred to as a nappy, a small serving dish usually made of glass. In this case, it’s one that originated during what’s known as the American Brilliant Period at the J. Hoare and Company glass cutting factory in Corning, New York. The date of 1853 refers to the company’s founding, not the date of manufacture, which was probably around 1900. Your piece carries the etched signature thought to have been used in 1901 and 1902. The company affixed paper labels to pieces produced prior to this time.

American Brilliant Period cut glass was a symbol of elegance. Pieces like this were often given as wedding and anniversary presents in the late 19th and early 20th centuries. American Brilliant refers to cut glass made from the time of the Philadelphia American Centennial celebration in 1876 to the beginning of World War I. J. Hoare & Company was one of the first companies to produce fine cut glass in the United States.

John Hoare, known as Captain Hoare to his business associates, was born in the city of Cork, Ireland on April 12th, 1822, the oldest of a large family of children of James and Mary Hoare. He learned the glass trade with his father in Belfast, and afterwards at the age of 20, left Ireland for England, where, in Birmingham, he worked as a journeyman for Rice Harris at Five Ways Glass Company and for Thomas Webb at the Wordsley Glass Works. Following his journeymanship, he became a foreman and traveling salesman for the firm of Edward Lacey & Son, of Birmingham. He was also foreman for Lloyd & Summerfield, one of the oldest glass houses in England.

In 1848, Hoare went into business for himself. Five years later, he and his family set sail for New York. When he landed, he had just a single half sovereign in his pocket. But being a skilled and experienced glass cutter, he had no difficulty in finding a good position. He soon began work E. V. Haughwout & Company on Broadway, and after a year, with five other men, formed a glass cutting partnership.

After two years Mr. Hoare bought the interests of two of his partners, then organized under the name of Hoare & Burns. This partnership continued until 1855, when he purchased and became proprietor of the glass cutting department of the Brooklyn Flint Glass Company, State Street, Brooklyn.

In 1868, John Hoare moved to Corning, New York, where he, together with Joseph Dailey, one of his original partners from Brooklyn, opened the glass cutting firm of Hoare & Dailey on the premises of the Corning Glass Company, from which it purchased its blanks, or uncut pieces of glass.

When people think of fine crystal today, names like Waterford and Baccarat immediately come to mind. But both of these firms are European. Today, buyers have few choices if they want to purchase fine quality cut glass crystal. But at the end of the 19th century names like John Hoare were at the top of the list because it was American firms like his that produced lead crystal that was far superior to anything made in Europe.

John Hoare became well known for his use of sharp geometric patterns. The light reflects off of these patterns beautifully creating prisms of color, exhibiting what Hoare became known for and what was then considered relatively new, the use of flared cuts rather than straight ones. Pieces produced prior to 1900 are often decorated with single motifs such as strawberry diamond or hobnail while those produced after 1900 are usually more complex. Combinations of three or more motifs are common. The company also created innovative celestial designs, inspired by the arrival of Halley's Comet. Pieces cut after 1910 often incorporate engraved floral and natural motifs. However, Hoare is best known for his earlier work.

John Hoare's experience in England undoubtedly provided the basis for some of the cut-glass designs he produced in this country. Hoare's Wheat pattern, thought to be characteristic of the American Brilliant Period, is a close relative of mid-19th-century cut-glass designs produced in the English Midlands.

After Captain John’s death in 1896, his sons carried on the family business. The firm prospered until World War I, when a shortage of lead crippled the entire cut glass industry. By 1920, the firm had declared bankruptcy.

Although J. Hoare & Company produced cut glass of fine quality during the company's last two decades, the average cut glass from much of this period was often inferior. Final polishing was often neglected or carelessly done, resulting in glass with an "acidy" appearance. Hoare cut glass that had been acid-etched with the company's trademark isn’t necessarily cut glass of fine quality. Your piece fits into this category. The best pieces originated in the late 19th century.

Wednesday, November 5, 2014

The Quest for Artistic Furniture



QUESTION:  I inherited this chair from my mom but have no information on it. The only markings on the chair are “AT2-232” written with a marker on the bottom of the seat and “678” stamped into the wood on the bottom of the seat. Can you provide any information on the chair?

ANSWER: Your chair is made in the Art Nouveau style. It would have been a dining or desk chair in its day since it doesn’t have a padded seat. The number 678 on the bottom is probably the manufacturer’s model number. Many pieces of Art Nouveau furniture were mass-produced even though your chair looks as if it was handmade.

Art Nouveau or Jugendstil is an international philosophy and style of art and applied art—especially the decorative arts—that was popular from about 1890 to 1910. Art nouveau literally means "new art" in French.

Those two names came Gallerie Maison de l'Art Nouveau in Paris and the magazine Jugend in Munich, both of which popularized the style. Maison de l'Art Nouveau, or the House of New Art, was the name of the gallery opened in 1895 by German art dealer Siegfried Bing that featured exclusively modern art. In 1900, Bing produced an exhibition of color-coordinated modern furniture, tapestries, and objets d’art at the Exposition Universelle. Because his decorative displays became so strongly associated with this style, the style, itself, took on the name of his gallery, "Art Nouveau."

Inspired by natural forms, such as flowers and plants, Art Nouveau was a reaction to academic art of the 19th century and artists used lots of curved lines in their designs.

Though the Art Nouveau movement was innovative, it didn’t last long. It was important in American furniture history, however, because it heralded the end of the dismal darkness that was the close of the Victorian era. Rebelling against the overembellished furniture that flooded the furniture marketplace of the late 1890s, some European designers developed new ideas that found immediate approval with wealthy collectors. They began designing furniture and accessories with simple, flowing, fluid lines, taking their cues from nature, with its motion, curves, and endless cycling. Fairylike tendrils wove in, out, and around the leaves and stems of flowers, fruit, and nuts. The entire effect was one of delicate sensuality and naturalness, with faint overtones of sentimental decadence.

The Art Nouveau years found their greatest expression in accessories, not furniture. This was the era that fostered the whirlwind careers of Louis Comfort Tiffany and others who worked in glass, china, pottery, and metal. Those substances were far easier to shape into the undulating styles of the time than was wood. Most wooden furniture during this period was custom-made and therefore usually of good quality and fine woods, featuring asymmetrical lines, as well as stylized animal and plant forms.

Art Nouveau is a "total" art style, embracing architecture, graphic art, interior design, and most of the decorative arts including jewelery, furniture, textiles, household silver and other utensils and lighting, as well as the fine arts. Artists desired to combine the fine arts and applied arts, even for utilitarian objects, such as tableware, cigarette cases, and silverware. Art historians consider it an important transition between the eclectic historic revival styles of the 19th-century and Modernism.

Three international art exhibitions—the Barcelona Universal Exposition of 1888, the Exposition Universelle of 1900 in Paris, and the Esposizione Internazionale d'Arte Decorativa Moderna of 1902 in Turin, Italy— showcased an overview of this modern style in every medium.

Like most design styles, Art Nouveau sought to harmonize and modernize forms of the Rococo style, such as flame and shell textures. Artists and designers also advocated the use of stylized organic forms as a source of inspiration, and expanded their use of natural forms with seaweed, grasses, and insects.

But unlike the craftsman-oriented Arts and Crafts Movement, the artists of the Art Nouveau Movement  used new materials, machined surfaces, and abstraction in their designs. The stylized nature of Art Nouveau design made it expensive to produce, therefore, only the wealthy could afford it. Unlike furniture handmade by the craftsmen of the Arts and Crafts Movement, that of the Art Nouveau Movement was produced in factories by normal manufacturing techniques. Finishes were highly polished or varnished, and designs in general were usually complex, with curving shapes.

Several notable designers of Art Nouveau furniture were also architects who designed furniture for specific buildings they had also designed, a way of working inherited from the Arts and Crafts Movement. One such designer is Antoni Gaudí, who produced many notable buildings in and around Barcelona, Spain.






Tuesday, October 28, 2014

The Essence of Comfort



QUESTION: when I was a kid, I remember sitting on my grandfather’s lap in a very comfortable chair. It was designed like a big glove and swiveled on a chrome base with four legs. I don’t know what it was called, but I remember him referring to it as Danish modern. Can you tell me anything about this type of chair?

ANSWER: You were very lucky indeed, for you got to experience the ultimate in Danish design, the Egg Chair, designed by Arne Jacobsen in 1957. But before we explore this chair further, it’s important to know how this design style came into existence.

In 1924,. Danish architect Kaare Klint was asked to teach a newly class in furniture design at the Royal Academy's School of Architecture in Copenhagen. Considered the originator of the modern Scandinavian style of furnishing and furniture design which thrived from the 1940s to the 60s, Klint’s influence on even today’s designs is great.

Using teak, which was plentiful in Denmark, the Danish Modern style began to emerge in the 1920s and soon gained popularity with cabinetmakers in Copenhagen. After 1945, this unique style achieved worldwide recognition and by the mid-20th century, Danish modern had officially arrived.

The son of Peder Vilhelp Jensen-Klint, the leading Danish architect of the early 20th century, Kaare Klint studied painting and apprenticed to several architects, including his father, before opening an independent furniture design studio in 1917.

He became the first Danish designer to combine function with Danish hand-craftsmanship. His drawings revealed an attention to the needs of the human body, long before the science of ergonomics came into being.

For instance, in order that his sideboards would be the most efficient, he determined the average dimensions of the cutlery and crockery used in a Danish home. Klint then created a case containing the smallest space required for the maximum amount of cutlery needed by a household. Aesthetically, he allowed the unvarnished teak to speak for itself, maximizing its clean beauty by waxing and polishing. And so Danish designers began using natural finishes for their pieces.

Klint is known as the grandfather of modern Danish design. He, more than any other Danish furniture designer, felt that it was important to understand the craftsmanship of the furniture of the past.

He pioneered in anthropometrics, which correlates measurements of the human body to make furniture better suited to man’s physical characteristics, essentially the essence of today’s ergonomics. In 1933, he created a deck lounge chair, which he outfitted with a removable upholstered mat and pillow.

America's initial fascination with Danish modern furniture was largely the result of Edgar Kaufmann Jr. of the Museum of Modern Art in New York. He returned from Europe in 1948 with photographs of chairs designed by another Danish  architect, Finn Juhl. The interest in Juhl's furniture led to a collection designed by him for the Barker Co.

Presented in 1951, the collection introduced American designers to the structural and decorative combining of woods of various colors and grains. Highlights included a teak armchair.   

Fruitful collaboration between designers and cabinetmakers led to more industrialized production. By 1950, a few factories in Denmark began producing furniture using purely industrialized methods. The new generation of designers included Arne Jacobsen, whose creations, while organic in nature, used materials such as light metals, synthetic resins, plywood, and upholstered plastics.

Graduating from the Royal Academy in 1924, Jacobsen soon demonstrated his mastery of both architecture and furniture design. With the completion of his Royal Hotel in Copenhagen with all its fittings and furniture in 1960, his talents became widely recognized.

Jacobsen's most commercial success was the Ant chair, which was available in a number of materials, including natural oak, teak and rosewood veneers, colored finishes or upholstery. Inspired by American legends Charles and Ray Eames, this unique chair was considered revolutionary in 1952, having only three spindly legs, no arms, and a one-piece plywood seat and back. The design of this chair became the basis for the stackable chairs used in hotels and conference centers today. Jacobsen followed the Ant with Series 7, a chair that had four legs and optional arms. Initially designed in 1955, and still being produced today.

Most of Jacobsen’s designs were the direct result of his belief that architecture and furnishings should be totally integrated. Two of his commissions—the Scandinavian Airlines Terminal and the Royal Hotel in Copenhagen—resulted from the creation of the uniquely shaped chairs, the “Egg” and the “Swan.” Designed in 1957, these modernistic chairs featured hi-density, rigid polyurethane foam, upholstered on single-seat shell construction. Both are extremely comfortable while being ergonomically sound and pleasing to look at.

There was a period of time in the middle of the 20th century when Danish designers were the world's most admired. Some of the most talented earned prizes at major competitions, and their works were quickly acquired by top European interior designers and collectors. Today, American designers see them suited to many different kinds of interiors.





Monday, October 13, 2014

Ladeez and Gentlemen! Welcome to the Greatest Show on Earth


QUESTION: When I was a kid, I loved going to the circus with my parents each Spring. There was something exciting and foreign about it—the unusual animals and the performers who seemed to come from all over the world. A while back, I purchased an old circus poster from the Barnum and Bailey Circus and have it hanging on the wall in my den. But I know nothing about it. A friend told me the U.S. Post Office recently issued a new set of stamps featuring circus posters. My interest has been rekindled all over again. What can you tell me about them?

ANSWER: Circus promoters referred to circus posters as "bills" from the early use of handbills, paper, or later, "lithos", whether printers produced them using lithography or not.

Circus owners recognized the notion that "a picture is worth a thousand words." So they incorporated illustrations, which early on took the form of wood engravings, or in some cases cruder woodcuts. Engravings from mahogany blocks, however, were difficult to make and expensive, so printers used them sparingly and repeatedly. The same images would be used over and over again, often for different shows, thus originating the concept of "stock" posters. Circuses produced early show posters in mass, using a single design, often with only a printed title. Other information, such as dates and locations would be handwritten or stamped with ink by circus advance men.

By the 1860's more circus owners embraced the poster as their main means of promotion. And by 1880, the Golden Age of the circus poster had begun.
   
The actual production of circus posters from idea to finished product was a team effort. Some of the most talented artists of the day designed circus posters, but most didn't sign their work. In fact, most printing companies created circus posters as production art--much like the "original oil paintings" available at Airport Hotel Sales. Any number of artists might work on the overall design of a poster. Often, specific artists specialized in certain subjects. For example, a single artist might specialize in lettering while another specialized in horses, and yet another in performer portraits.

Circus posters can be divided into two categories—stock or specialty. Stock posters, generic designs that could be used by any circus, included images of clowns, wild animals, performers, etc.. Show printers would print large runs of stock designs and store them, making them the most inexpensive. Circus owners could pick these out of catalogs and have their show's  title printed on them. It wasn't uncommon for more than one circus to use the same poster designs in the same season. Printed stock posters might remain in storage for years until a printer sold them to a circus to be used. Often posters used during a specific year had actually been printed decades before.

The dimensions of circus posters are important in dating them. Originally, printers based the sizes of posters on the size of their printing press beds, which varied widely. Eventually, printers standardized a unit of measure called a "sheet"at 28" by 42", basing these dimensions on the dimensions of a lithographic stone a single man could handle or carry.

The most common were "one-sheets," followed by "half-sheets" measuring 28"x  21".  "Flats" had a horizontal format, while "uprights" had a vertical orientation. Printers also produced various multiple sheets, with corresponding multiple dimensions. They produced larger multiples in rare instances, including 100-sheet posters and larger. Printers determined the kind of bill by the combinations of sheets.

Even though printers produced circus posters cheaply by the thousands, they used high quality medium weight woven paper, usually bleached to a bright white color, even though posters were printed in volume and used briefly. Also, printers used oil-based inks for printing circus posters because they were often hung outside.

In the mid-1970's, Ringling Brothers and Barnum & Bailey adopted a policy of using only a single poster design for each edition of their circus, often incorporating a variety of featured acts or attractions in the design. By the late 1970's, few circuses even used posters, and many shows opted to use window cards only, which could be placed indoors or simply be stapled to telephone poles outside.

Probably the greatest image ever produced for a circus poster design was that of a leaping tiger, designed by the noted illustrator Charles Livingston Bull in 1914. This particular image may well be the most recognizable circus image in history, and it’s still in use today, often appearing in set and costume designs in current productions of the Ringling Bros. and Barnum & Bailey Circus. Bull's original poster image, however, doesn’t bear his signature.

Generally speaking, circus posters can sell anywhere from $30 to $375.  With such a broad range, collectors must take the specific circus, date, and condition into consideration. At the low end might be a mint Famous Cole 3 Ring Circus poster with black type on yellow stock for $30. At the high end might be a rare Cole Bros. Circus from the Erie Litho. & Ptg Co., of Erie, Pennsylvania, bearing the title, “Cole Bros. Circus Presents Quarter- Million Pound Act of Performing Elephants–The Most Colossal Train Animals Display Ever Presented” for $375.

Although circuses continue to thrill youngsters, much of the promotion is now done using T.V. and radio ads and discount coupons handed out in supermarkets. The days of posters plastered on the sides of buildings are long gone.