Showing posts with label tung. Show all posts
Showing posts with label tung. Show all posts

Monday, March 27, 2023

Maintaining Antique Furniture

 

QUESTION: I recently inherited a number of pieces of antique furniture from my grandmother. They range from just under 100 years old to around 200. She loved nice things and was always on the lookout for interesting pieces. Unfortunately, as she got older, she was unable to care for them as well as she had in the past. I’m new to antiques and have no idea what to do to care for these pieces. Can you help me?

ANSWER: You’re very lucky that she thought that much of you to leave you her prized pieces. Over time, antique furniture accumulates dirt and grime. Even if she dusted it often, doing so grinds the dirt in, believe it or not. So the first thing you need to do is clean your pieces.

Cleaning is a simple process but you must be careful not to hurt the finishes. One of the best products to use to clean antique furniture is Murphy’s Oil Soap which comes in a concentrated liquid and also in a spray bottle. The best material to use for cleaning is an old washcloth with a bit of nap left on it. If you’re using the concentrate, mix with water following the directions on the bottle. Dip the washcloth in the mixture and get it nice and soaked, then wring it out as much as you can. If you’re using the spray, apply some onto a wet, wrung out washcloth. Clean a small section of a piece at a time, drying immediately with an old towel. You’ll have to rinse the washcloth often as it will pick up a lot of dirt. When you’ve washed the entire piece, let it dry for at least 24 hours. You’ll notice that your pieces are beginning to look a lot better already.

But cleaning is only the beginning. After a piece is thoroughly dry, you’ll need to apply a protective coating. 

The most common finishes found on antique furniture are waxes, oils, shellacs, and varnishes. Not only do these finishes bring out the beauty of the wood's grain and color, but they also protect the wood from moisture and heat changes that can cause shrinking, swelling, crazing, and cracking. Finishes seal the wood pores against dirt and grime, too.

But in order for a finish to protect the wood, the finish itself must be protected. This can be done by polishing the finish with either a wax or an oil.

You can find waxes in liquid, aerosol spray, and paste forms in hardware and home supply stores. Look for products that contain carnauba wax, a natural substance from a palm tree native to Brazil, that’s especially durable and produces a glossy shine when rubbed vigorously. Minwax is one of the best on the market. 

Another reliable and popular polish is beeswax, which has been available for many years. You’ll find a variety of paste and liquid polishes containing beeswax in hardware and home supply stores. 

Apply either type of wax with an old athletic sock. Rub it in thoroughly and wait at least 30 minutes before buffing it with #0000 steel wool. Don’t worry, this grade is as soft as fabric. Wait 24 hours and apply a second coat. But this time, buff it with an old towel.

Oils such as tung, linseed, and lemon oil have been used for centuries to preserve and polish furniture finishes. They're often mixed with absorption promoters, so they actually sink into the wood pores rather than remaining on top as waxes do. Oils leave a lustrous shine that’s softer than a glossy wax shine, and they provide good protection against moisture. However, they tend to darken the wood slightly over time. And as with applying wax, use a piece of old athletic sock to apply the oil. Since you'll need to give your furniture a second coat of oil in most cases, place the cloth you used in a plastic bag and then in the freezer. When you're ready to apply an additional coat, take it out 30 minutes before you plan to begin so that it can thaw.

Regardless of whether you choose to use a wax or oil, always use the same type that has been used previously on a piece of furniture. Finish surfaces that are accustomed to one type of polish won't accept another type. For example, an oil applied to a finish that had been previously waxed will remain on the wood surface and won't soak in.

If you don't know what type of polisher has been used on a piece—apply a small amount of an wax or oil to an inconspicuous spot on the piece. The wood should accept one of them and that is the one you should use.

How often you need to clean and polish your antique furniture will depend on the kind of heating and cooling system in your home, its geographical location, how you use your antique pieces, and the type of cleaner/polisher you're using.

Avoid using spray oils or dusting helpers like Pledge on your antique furniture. The oil in them will only build up on the piece, attracting more dust and grime. Generally, you’ll need to reapply a wax or oil every six months or at least once a year. A light dusting in between applications will keep your pieces looking good.

Besides regular dusting and waxing or oiling, you also need to provide the proper environment, paying close attention to heat, humidity, and light. 

It’s important not to keep your rooms too warm. Extreme fluctuations can harm antique furniture, loosening joints and veneers. During the colder months, depending on your geographical location, keep pieces away from radiators, warm air vents, and fireplaces. Too much heat can rob the wood of vital moisture.

Keeping a relative humidity level at around 55 percent at 65 degrees F. is also important. Purchase one or more inexpensive digital barometers and place them in rooms with your antique furniture. 

Lastly, avoid placing antique furniture, especially older more valuable pieces in direct sunlight or artificial light, especially with today’s LED lightbulbs. Over-exposure to either is harmful.  

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "folk art" in the 2023 Winter Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.



Monday, August 8, 2011

Basic Refinishing 101



QUESTION: I have a 1930's silky oak drop-door desk that has been in our shed for about 20 years. It has seen a few cyclones and had a lot of weathering and the doors are off and knobs missing. This desk holds special memories for me as a young child watching my dad working at it. I’d like to refinish it but have no idea where to begin. How hard would it be for a beginner like me to refinish it?

ANSWER: Your desk sounds like the ideal piece of furniture on which to learn about refinishing furniture. For many beginners, refinishing seems easy, but it’s far from it. First you need to decide if the piece needs to be completely refinished or the original finish preserved. Your desk seems like it may fall somewhere in between.

It’s only been within the last 20 years or so that refinishing products have appeared that make the job less intimidating. However, most people think you have to strip off all the old finish before applying a new one. That all depends on the condition of the piece.

Your piece appears to have been through some tough times. Before you do anything, you need to evaluate it. Has the finish been mostly removed by weathering or is it spotty? If it’s the former, then you’ll need to sand it following the grain of the wood with fine to medium grade sandpaper. If it’s the latter, you may be able to just clean it up and apply a new coat of varnish. With refinishing, a little effort goes a long way. The nearer you can keep your desk to its original condition, the better.

Let’s assume the worst. If the finish has mostly been removed by weathering, you’ll need to remove what remains with a good varnish remover. Be sure to buy one that’s water soluble. Even though this takes longer to achieve the results you want, the fumes are mild and cleanup is easy. When using a remover, always brush it on with the grain of the wood. Do a little section at a time, turning the piece on end if necessary to make it easier to apply the remover. Scrap it off with a putty knife, and be sure to have a roll of paper towels handy to wipe up the excess and stripped varnish or paint.

After you’ve completely stripped your desk of its finish, lightly sand it with fine sandpaper. Wrap the sandpaper around a wooden block for support and sand with the wood grain. Be careful not to over sand---just enough to smooth the surface. After you’re finished sanding, wipe the desk with a damp cloth to remove all the dust. Do not get the wood wet.

Once you have prepared your desk for its new finish, let it rest for a day to make sure the surface is thoroughly dry. Dust it off with a dry cloth to make sure it’s clean, then begin to rub on a new furniture finish of tung or Chinese oil using a piece of white tube sock or other soft cotton material going with the grain of the wood. Several manufacturers make this, including Formbys, and you should be able to buy it at your local hardware or home center. The first coat will soak into the newly stripped wood. Let it dry 24 hours, then sand lightly with fine sandpaper. Dust it with a damp cloth again and let dry. Apply a second coat of the tung oil and repeat the process, except this time rub it with 0000 steel wool after it dries. Dust off again and apply a third and final coat of tung oil, but don’t rub with the steel wool this time.

The advantage to using tung oil is its rapid drying capability. Though it will feel dry to the touch in an hour or so, be sure to let it thoroughly dry for 24 hours. And don’t apply it on a humid or rainy day. And here's a tip: Wrap your application cloth in plastic wrap or put it into a Zip-Loc sandwich bag and place it in your freezer. Take it out 30 minutes before you're ready to apply another coat, and it will be ready for you.

Be sure to tune in next week to learn about preserving the finish of a piece of furniture that isn’t in such bad shape.