For Every Meat There is a Turn

QUESTION: I love old mechanical things. Recently while rooting through a box of old junk at a monthly flea market, I came across an unusual item. It looks like a round can from which protrudes a cylinder. On the end of the cylinder is an odd-shaped ring and in the side of the can is a hole with a place to insert a key. Can you tell me what this is and something about it, if that’s possible?

ANSWER: It looks like you’ve found an antique spitjack. However, some of its parts are missing.

Today, you can go to any supermarket and purchase a fully roasted rotisserie chicken or turkey breast. But back in the 18th century, that wasn’t possible. All meats had to be slow roasted on a long pole called a spit over the fire in a huge, walk-in kitchen fireplace. And to do that evenly, it took man or woman power. Wives, children, servants, or slaves had to stand by the fire and slowly turn the meat until it was done. This had to be one of the most boring jobs in the 18th and early 19th centuries, so no one enjoyed doing it.

Roasting meat on a spit dates as far back as the first century B.C.E. During Tudor times, someone even came up with an ingenious way to have a dog provide the power to turn the spit—the dog ran in a treadmill linked to the spit by belts and pulleys. But it wasn’t until the 18th century that things got a little easier for cooks. It was then that the weight or clock jack came into being.

Descending stone, iron, or lead weights powered most of the spit-turning mechanisms, or more commonly spitjacks, used by Colonials and their British counterparts. In England, cooks referred to them as weight jacks, but in America, they came to be known as clock jacks because they used a clockwork mechanism to wind a spring used to turn the spit.

Earlier jacks of this type had a train of two arbors or spindles. Later ones had a more efficient train with three arbors. Those made and used in England had a governor or flywheel set above the engine as opposed to being located within the frame and to one side—to the right for a two train works and to the left for one with three trains. These weight jacks also contained a flywheel within the frame, usually at the
in a bell-like arch at the highest part of the frame.

In 1792, John Bailey II, an American clockmaker, patented the first steam-driven jack. However, the Turks used a mechanism similar to Bailey’s jack back in the mid-16th century.

Another type of roasting jack, the smoke jack, appeared in the early 17th century. This jack moved by the flow of the smoke from the fire over the sails of a horizontal wheel which lay sideways. By placing the wheel in the narrowest part of the chimney where the motion of the smoke was the fastest and where the greatest amount would strike the sails, the mechanism would slowly turn the spit, thus roasting the meat. But this type of jack had its downside since the speed of the jack depended on the draught of the chimney and the quantity and strength of the fire in the fireplace.

The type of jack you purchased is called a bottle jack because of its bottle-shaped hydraulic lifting device. A brass shell contains the clockwork motor. Introduced in the late 18th century, it replaced the earlier and simpler dangle spit. When the cook set the weights, the spit turned, eliminating the need for manual labor for approximately 30 minutes, after which the cook would have had to readjust the weights. Bottle jacks continued to be made and used until the early 20th century.

If your jack had all of its parts and was in better condition, it would sell for around $400.

Back to Nature

QUESTION: Recently I got a rustic night stand from my grandmother’s house after she died. She had once said that it came from a sale of furniture from a cabin in the Adirondack Mountains here in New York State. I’ve never seen anything quite like it. It’s a funky piece, and I’d like to know more about it. Can you help me?

ANSWER: Your grandmother’s night stand is indeed a piece of rustic furniture, also known as Adirondack furniture, even though it wasn’t restricted to just the Adirondack region.

The idea for rustic furniture came about in the late 18th century at the beginning of the back-to-nature movement, a change from the world of classic, predictable furniture patterns to one of more fanciful design using natural materials. 

Little summer shelters appeared in city gardens, often covered in vines or surrounded by trees and shrubs. These summerhouses also provided a small green refuge that shut out the discomfort and ugliness of city life.

Designers copied nature's lines in drawings for chairs and settees for these shelters and the garden paths around them. Their plans called for gnarled, distorted limbs of shrubs and trees to make a chair or bench, instead of the usual marble or plain wooden seats. Gardens, themselves, became more picturesque and less formal, with curving paths taking the place of straight ones. Designers strategically placed rustic chairs, benches, arbors and gates throughout the plantings.

At the same time came the discovery of warm springs in America. Basic living conditions were the rule in the hotels and cottages that sprung up around the springs. The coarse furniture changed from plain and primitive to fanciful and rustic as hotel owners updated amenities.

By the late 19th century, America’s millionaires filled the resorts, but although they considered themselves naturalists, they dressed and lived formally in the midst of the rustic furniture, for they had no intention of roughing it.

But some of these naturalists set up their own camps with tents and log cabins and built rustic furniture for them or had local craftsmen do it for them. Eventually, the log cabins became large log houses with all the latest amenities. Soon they became known as compounds or family camps. However, life in these camps was more back-to-nature and relaxed than at the warm springs resorts.

Rustic outdoor furniture filled the porches of these houses and spilled onto the grass. Couches and chairs made of rough pieces of local woods, holding loose cushions, adorned the sitting rooms. Even the beds showed off the rustic style, often with fanciful patterns on the head and foot boards.

The term rustic furniture covers a functional style made of organic materials, such as the tree or shrub limbs and roots or the trunks of saplings indigenous to area of the craftsman. Although roughly made, the style was often sophisticated and imaginative. The more knots there were in the limbs, the more the designers favored them. They even left the bark on the wood whenever possible to give each piece more texture and individuality.

In the Adirondack region of New York State, craftsmen made rustic furniture for the wealthy families who had camps there. They used large, gnarly roots in their furniture designs, making them into table legs and chair arms. They favored birch to build with, a slender tree with bark that peels in strips, giving the craftsmen a striking veneer for their furniture. These pieces quickly became known for their geometric designs made of the white birch bark veneer, especially on case furniture, such as your night stand. Also, many of the intricate veneered designs included various kinds of split twigs, carefully chosen by color to form patterns.

Appalachian craftsmen took pride in knowing how to get wood to work for the intricate twists, bends and weaving for their furniture designs. They knew just when and how to bend saplings while they were still growing, letting nature do some of the work before they were ready to use the wood. The best woods to use were laurel, hickory and willow because of their flexibility and strength. They built their furniture with graceful loops and interwoven curves, weaving each piece of wood to create tension, resulting in a hid-den strength disguised by the fragile look of the design.

Today, you’ll find rustic pieces at higher-end antique shows. Occasionally, they’ll appear at flea markets. But people consigned a lot of pieces to the bonfire after they went out of fashion in the mid-20th century. So prices tend to be on the high side because of the uniqueness of the pieces. Twig rockers can sell for $150 and up, while lounges and settees can go over $2,000.
Case pieces rarely come on the market and when they do, their prices are exceptionally high, often in the four and five figure range. The most common pieces are various chairs and plant stands, priced anywhere from $75 to $600.

As the 20th century moved forward, individual craftsmen found it hard to keep up with the volume of orders, so factories opened to meet the need. Business remained brisk for the rural craftsmen until the 1940s and by the 1950s, rustic furniture was no longer popular.

Woven Beauty

QUESTION: I recently purchased a wicker table at an antique show. It doesn’t have any markings and the dealer who sold it to me couldn’t tell me much about it. I love this piece and it now occupies a prominent place in my den. Can you tell me anything about it? And can you also tell me a bit about the origins of wicker in general.

ANSWER: Wicker has been around for quite a while, but your table originated during the peak of its popularity. Back then, the ornateness of wicker brought an element of taste to middle-class American homes.

Back in the 17th century, the Dutch made wicker and brought it to England before sailing across the Atlantic to the New World. For the next several centuries objects made of wicker imported from Europe decorated American homes.

Until the 1850s, furnishings were inexpensive and serviceable, therefore easily disregarded. Then through a changing cultural, economic, and social conditions, wicker became a status symbol for America's rising middle class.

Although the mass production of wicker began in America, the main materials used in its manufacture—cane and reed—came from rattan palms, which grew wild in Asia. In the early 1840s, Cyrus Wakefield, a shrewd young Yankee grocer, noticed huge quantities of rattan being discarded around the Boston docks after serving as packing material to protect cargo on clipper ships returning from Asia. Discovering that chairs and tables could be made more cheaply from this strange material than importing finished pieces, he began making small pieces of furniture using this discarded rattan.

In 1873 he founded the Wakefield Rattan Company in Wakefield, Massachusetts. By the end of the decade, his firm accumulated sales of over $2 million. At its peak, his  company employed 1,000 workers in 30 buildings in Wakefield and another 800 in  Chicago.

Wakefield's successes encouraged Heywood and Brothers Company, wooden chair makers in Gardner, Massachusetts, to begin making wicker furniture in 1876. For the next 20 years, the two companies competed fiercely and dominated the industry.

Both companies responded to economic prosperity following the Civil War which enabled middle class families to leave America’s dirty, crowded cities for clean, airy suburbs, prompting a demand for wicker furnishings. These light, airy pieces were ideal for the new gabled and turreted Queen Anne-style homes and for the verandas of resort hotels catering to the new vacationing middle classes.

Because it was easy to keep clean, wicker attracted those concerned about sanitation, and its lightness, adaptability and design potential, Victorian tastemakers loved it. Wicker not only satisfied those with good taste but did it at an affordable price.

When the Aesthetic Movement swept America in the 1870s, stressing the uplifting moral and spiritual influence of artistic decors, tastemakers recommended the use of ornamental wicker in people’s homes. This emerging middle-class interest in aesthetically correct furniture encouraged Wakefield and other manufacturers to create increasingly ornate pieces that people associated with art and beauty. Fancy wicker enhanced the ostentatiously overdecorated Victorian parlors and expansive porches while proclaiming the taste of its owners.

Curling, shaping and twisting pliable lengths of wetted reed into whimsical scrolls, spirals, and whirlygigs, skilled craftsmen fed the Victorian fever for more exotic wicker objects. They incorporated a variety of astronomical and botanical forms, flags, Oriental fans, shells, and ships into their elaborate designs. Two of the most unique pieces was the tete-a-tete, in which two people could sit side by side or the serpentine "Conversation Chair,"  in which a courting couple could sit facing each other.

Elegant tables were important to the decor of Victorian homes. With its intricate grid of legs and embellishments, fancy skirt and caned top, a square table would have added grace and utility to its owner's room.

The growing demand for more elaborate forms reached its peak during the 1890s, when American wicker became more fanciful and ostentatious. A good example is the "Fancy Reception Chair,” featuring intricate tiny scrolls and frilly curlicues. Often designed as show pieces for elegant parlors rather than for actual use, these ornate chairs are fairly hard to find today and often sell for upwards of $1,000 in good condition.

By the turn of the 20th century, Victorian ornate design faded in favor of simplicity. Design reformers instead promoted the "Bar Harbor" style, simplified wicker furnishings with wide open, diagonal latticework that would fit plain, open interiors.

Just before World War I, the Arts and 'Crafts movement inspired American wicker   manufacturers to create boxy, unornamented shapes ideal for the minimalist interiors of bungalow homes. Arts and Crafts leader Gustav Stickley produced a line of square and severe willow furniture using geometric designs. However, by the  beginning of the Great Depression, wicker was all but dead in America.

The Red Carpet Treatment

QUESTION: My great grandmother left me a beautiful Oriental carpet runner. My grandmother said it is quite old, but I’m not sure by how much.  What can you tell me about antique Oriental carpets? I have no idea about its origins, pattern, and such.

ANSWER: What most people classify as Oriental carpets are actually Persian (now Iranian) or Turkish carpets. Originally made to cover the sand in the tents of nomads and to kneel on when saying daily prayers, these beautiful floor coverings have a long history.

Oriental carpets have been highly prized in the West since their first appearance in Venice in the 13th century. By the 18th century they were common in wealthier households. But relative demand was fairly small, so the production of carpets declined. During the 19th century, trade routes improved, contact with the Orient increased, and the Western obsession with the exotic grew. So Persian weavers produced great quantities of carpets for export.

Carpet-weaving is an integral part of Iranian culture and art and dates back to ancient Persia. Weavers from other countries copied the designs of Persian carpets, but Persia produced 75 percent of the world's woven carpets.

Generally, Persian carpets can be divided into three groups—Farsh/Qa-li, any carpet greater than 6×4 feet, Qa-licheh, sized 6×4 feet and smaller), and nomadic carpets known as Gelim including Zilu, meaning "rough carpet," mostly for use in tents.

Wool is the most common material for carpets but cotton is frequently used for the foundation of city and workshop carpets. There are a wide variety in types of wool used for weaving Oriental carpets, including . Kork wool, Manchester wool, and in some cases even camel hair wool.

Persian rugs have both a layout and a design which in general include one or more motifs, so it’s not unusual to find more than one motif in a single rug. The original designs act as the main pattern and the derivatives as the sub patterns. Rug experts have identified 19 pattern groups---historic monuments and Islamic buildings, Shah Abbassi patterns, spiral patterns, all-over patterns, derivative patterns, interconnected patterns, paisley patterns, tree patterns, Turkoman patterns, hunting ground patterns, panel patterns, European flower patterns, vase patterns, intertwined fish patterns, Mehrab patterns, striped patterns, geometric patterns, tribal patterns, and composites. The most common motifs include Boteh, Gul, Herati, Mina-Khani, Rosette, Shah Abbasi, Azari Kharchang, and Islimi Floral.

Persian rugs are typically laid out using one of four patterns—all-over, central medallion, compartment and one-sided. So a rug’s design can be described in terms of the manner in which it organizes the field of the rug. One basic design may serve the entire field, or the surface may be covered by a pattern of repeating figures. In areas using long-established local designs. the weaver often works from memory, with the patterns passed on within the family.

Weavers often tailored the dimensions of their carpets to suit Western needs. They produced a disproportionate number of runners—long narrow rugs originally designed to cover the sides of rooms or tents since these had special appeal to Westerners. Even so, the standards remained the same. The major carpet-weaving centers—Persia, Turkey and the Caucasus—continued to use traditional motifs and techniques, maintaining the carpets’ regional integrity and originality.

While carpets made before 1800 are extremely expensive, the antique carpet market offers some excellent buys for the beginning collector. High quality runners generally cost between $1,500 and $15,000, depending on overall design, pliability, date, and type and number of knots.

Edgar Allan Poe once said, “A judge at common law may be an ordinary man; a good judge of carpets must be a genius.” And as hard as they are to judge, they’re certainly easy to enjoy.

The Little Beaded Bag

QUESTION: I recently purchased a little beaded bag at an antique show. It’s so delicate and finely done. Can you tell me how I might figure out how old it is and perhaps something about beaded bags in general?

ANSWER: After years of languishing in attic trunks and flea markets, antique beaded bags have become among the most sought after collectibles. This has caused prices, and thus value to soar in recent years.

Until the 16th century, women wore purses dangling from the waist. By the 17th century, flat tapestry or embroidered wallets were common. But by the late 18th century, the hand-carried framed or drawstring purse or handbag had appeared. Especially prized were French sable beaded bags made of beads so tiny it took about 1,000 to make a square inch. Designs included commemorative scenes like the first balloon flight in 1783.

In the early 19th century, women began carrying their indispensables—handkerchief, fan, perfume bottle—in little drawstring bags made of fabric. Often elaborately trimmed with beads or lace, they called them "reticules." So popular was the reticule that it became an absolute "must" for fashionable ladies of the 19th century.

Between 1820 and 1830, beaded bags supported by metal frames came into vogue. Coming primarily from France and Austria, the frames were made of everything from pinchbeck, an alloy of cooper and zinc made to look like gold, to tortoiseshell. Makers attached chains, often formed of decorative, ornate links,  to the frames.

Floral beaded purses flourished from the mid to late 1800s. At that time, milliners, perfumers, and trinket shops sold beaded purses,, but Victorian ladies, who prided themselves on their fancywork, often made their own from patterns found in Godey's Lady's Book and other fashion publications. They particularly favored floral designs of tulips, roses, lilies, and forget-me-nots in bouquets or strewn across a solid background of beads. Only the most experienced beaders attempted intricate landscape, Biblical, and figurative motifs. The finer the beads used, the more tapestry-like the appearance.

By the early 20th century, beaded bags had become increasingly fashionable. Frames were more ornate, often made of solid gold, sterling silver, nickel, amber, ivory, or celluloid and often heavily engraved or embossed, embellished with gemstones, filigree, pearls or enamel work.

The criteria for judging a purse's value include condition, rarity, bead size, complexity of pattern, and the uniqueness of the frame. Some of these frames are remarkably detailed works on their own, ornately executed in silver, wrought gold, or brass, and inset with tiny stones and pearls. Each bag has its own personality. Some are very regal and elegant while others are more simple, homespun pieces.

Dating a beaded bag can be a challenge since newer bags are often made with older beads. For instance, beads from the early 19th century might be used to decorate bags made in the 1920s. And while a bag's frame can sometimes provide clues to its age, not even this is foolproof.

Water, Water Everywhere

QUESTION: I discovered this unique water bottle at a local antiques co-op. While most antique water decanters are solid cut or pressed glass, this one comes apart into two pieces. A metal ring, with a rubber gasket to make the seal tight, screws onto the base. The mark on the bottom edge of the top section reads: Perfection Bottle Co., Wilkes-Barre, PA Pat March 30-97. What can you tell me about this type of water bottle?

ANSWER: You, indeed, have found a unique water bottle. Though a revolutionary idea, this type of water bottle appeared in stores for only a few years.

From the mid-19th century to the early 20th century, water bottles were standard items in many American Victorian households. They appeared on dinner tables either alone or with matching glasses and in bedrooms often with a glass that set upside down over the top of the bottle. They also could be found on the nightstands in hotel rooms and steamship cabins, and on tables in railroad lounge cars.

At first, manufacturers made them of elegant cut glass, but that was too expensive for the average person. Some turned to using pressed glass in a variety of patterns which lowered their cost.

However, cleaning these crystal beauties posed a serious problem with hygiene. The bottle’s narrow neck made it hard to get a brush down into it, making it almost impossible to clean the inside surface of the bottle’s bulbous interior. But that changed in 1896 when William B. Fenn came up with the idea of a separating water bottle—one with pieces that could unscrew for easy cleaning. On March 30 of the following year, he applied for and received a patent for it.

Fenn’s separating water bottle had an ingenious design. He made the neck and base two separate pieces, with the bottom edge of the neck fitting inside the top rim of the base. A rubber gasket formed a waterproof seal between the two parts and a metal ring screwed over the joint to lock the pieces in place.

Even though Fenn used glass for his original design, he stipulated in his patent that any material, including ceramics and porcelain, could be used for the bottle, itself, and any metal could be used for the joining ring as long it wouldn’t corrode.

It took nearly three years for Fenn's" bottle to be available to the public.,Priced at $4.50 each when they first came on the market in 1900, they were well beyond the means of the average person. Realizing he had to do something to increase sales, Fenn redesigned the pattern on the bottle so that it could be pressed instead of cut. Suddenly, the price per bottle dropped to 50 cents per bottle, or 34 cents each for a dozen, making the Fenn water bottle affordable for everyone.

Fenn’s invention was so successful that he decided to expand production. By October,1902, consumers could purchase a decanter and stopper in four sizes—half pint, and one, two and three-pint versions. And during 1903; He expanded the line further to include other glass containers, such as   syrup pitchers and cruets, as well as bitters, cologne, and barber bottles, each with a different pattern.

The separating water bottle came in three models—the Royal, with a delicate design imitating cut crystal, the Imperial, also sold in two and three-pint capacities but without a pattern, the Optic, with a succession of single, convex protruding, vertical panels with rounded tops and bottoms, and the Colonial, featuring nine rounded panels with flat bottoms around the base. Each came in two and three-pint sizes, except the Colonial which also came in a half-gallon size.

In 1903, the Perfection Water Bottle Co. and the Sterling Glass Co. combined to create the Perfection Glass.Co. of Washington, Pennsylvania, with William Fenn as one of the initial investors. But the new company was only to last until 1907 when it closed its doors for lack of sales.

Joined Together Forever

QUESTION: How can I tell the difference between handcart dovetailing and machine cut dovetail? What other distinguishing characteristics can you tell me about that will help identify the age and authenticity of a piece of furniture?

ANSWER: Dovetailing is an excellent way to estimate the age of a piece of antique furniture.
The name “dovetail” comes from the appearance of the joints, used to assemble drawers and structural pieces on case or storage furniture, such as chests and bureaus, which look like the triangle shape of a dove’s tail. The earliest examples appeared on furniture placed with mummies in Egyptian tombs thousands of years ago. Similar ones appeared on pieces in the burial tombs of   ancient Chinese emperors.

Each joint has two parts—the pin and the tail. The pins protrude from the fronts of drawers while the tails are negative holes in the sides of drawers into which they fit. Early cabinetmakers cut these joints by hand, using small, precision saws and wood chisels,  producing different sized pins and tails, with the tails being larger than the pins. These early joints often had only three or four dovetails per joint. First, they made tiny angled saw cuts, then carefully cut out the pins on both sides to avoid splintering using a sharpened chisel. They cut the pins from one board and, the tails from another so they matched perfectly, thus giving them both strength and durability.

Not only did cabinetmakers use hand cut dovetails to hold the sides of drawers together, they also used them to join the structural members of case or storage pieces, such as dressers and bureaus. Back then, handmade screws and nails cost a lot and could rust and expand, sometimes cracking the wood they secured. Glues of the time weren’t much better and often dried out and weakened.
Simpler country furniture often had larger dovetails, or even a single pin and tail.

Towards the latter part of the 19th century, cabinetmakers began to use machines to construct dovetail joints, resulting in equally sized pins and tails running from the top to bottom of the joint. Today, cabinetmakers add a touch of glue to the joint to assure it will last for a long time.

Hand made dovetails remained the standard of good furniture craftsmanship until 1867, when Charles Butler Knapp invented a machine to cut  “scallop and dowel,”  or round-style dovetails, often used on late Victorian and Eastlake furniture. While Knapp’s machine revolutionized dovetail joint making, routers, producing the familiar keystone shaped pin and tail dovetail, came into widespread use and became the standard of better American furniture manufacturers today.

Since the dovetail joint has evolved over the last 144 years, the type of dovetailed joint, especially in drawers, can be used to date antique furniture. To approximate the date of a piece of antique furniture, remove a drawer and look closely at the dovetail joints. If it’s been cut by hand, the drawer will only have a few dovetails which will not be even. If the joints are closely spaced and precisely cut, then they’re machine-cut. Handmade dovetails almost always indicate that a cabinetmaker produced a piece before 1860.

Preserving Antique Furniture

Some pieces of furniture, especially those constructed of harder woods, such as walnut, mahogany, maple, oak, or cherry, may only need to have their surface finish preserved. In the case of furniture made of these woods, there may be enough of the original finish left to restore the piece rather than refinish it.

Before doing anything, study your piece. Is the finish pretty much intact? Does the piece have a nice patina? Is the piece more than 100 years old? If you answered yes to even one of these questions, then you should do your best to preserve the finish of your piece.

The first step to preservation is cleaning. Furniture gets dirty, even grimy over time. Before you can apply a new finish, you need to get rid of all the accumulated dirt and grease that often make it difficult to tell what kind of wood the piece of furniture is made of. Grime can also hide the fine lines of inlay and marquetry. Believe it or not, using lemon oil, a popular furniture polish, can do more harm than good. Since its made of a light petroleum oil and some paraffin wax, the wood doesn’t absorb it. Instead, it acts as a surface dust catcher.

One of the best products for cleaning wood, especially furniture, is Murphy’s Oil Soap. Today, it’s also in a spray bottle, but in case you can’t find it that way, you can make your own cleaning solution by mixing a capful of Murphy’s in a spray bottle of water. For this, you can use any empty spray cleaner bottle, as long as you wash it out thoroughly first. Since water will loosen any glued joint, and also tends to raise the grain of the wood, you don’t’ want to use very much. An old washcloth will do quite well for cleaning.

Spray the Murphy’s on a damp washcloth and then rub it on the surface of the furniture. Rinse the cloth when it gets to dirty. Have a second wet, but wrung out, washcloth ready to wipe off the Murphy’s Oil solution, wringing the cloth nearly dry after every few wipes. You can also use a green scruby cloth, sold in Dollar Stores, if there’s hard to remove grime. A stiff-bristle brush will allow you to get the dirt out of carved and turned areas. The secret is to clean only a small area at a time–one leg of a chair, one part of a chest, and so on. After you clean an area, wipe it dry with an old face towel. Be sure to wash out all your cloths or use others as you progress, especially on a large piece of furniture. After you have finished cleaning your piece of furniture, give it a final wipe with a clean cotton rag and set it aside to dry for 24 hours.

Now you’re ready to apply a new finish. You can either use plain tung oil (see last week’s blog) or a product like Minwax® Water-Based WoodSheen® which is a water-soluble mixture of furniture finish and stain that comes in six colors. For a piece that’s got lots of scratches or marks, it’s best to choose a stain color that complements the wood’s original finish.

The final step is polishing the entire piece using a prepared wax like Minwax, which comes in light and dark varieties. Obviously, use the light for woods like oak or cherry and the dark for woods like walnut or mahogany. Apply the wax with a piece of soft cotton cloth like an old athletic sock and after 30 minutes, polish the surface with an old face towel. One coat should do it, but for tabletops, apply two coats of wax.

Rub off the first coat with 0000 steel wool, then apply the second and polish with the towel. The more coats of wax you apply, the more water resistant the top will become. A light polishing once or twice a year will keep your piece in great condition.

There are no short cuts or time savers to this entire process. The work can be slow and at times tedious, but the results are worth it.

Solving the Ivory Mystery

QUESTION: I have a piece of scrimshaw which has been in my family for years.  I’d like to know how I can determine if it’s authentic or not. On the tooth are two American flags with 23 stars.

ANSWER: Trying to figure out whether a piece of scrimshaw is real or not isn’t that hard. Telling the difference between ivory, bone and plastic requires some close inspection. The high value of scrimshaw due to its rarity and artistic craftsmanship foster fakes.

Ivory, bone, and plastic each have unique characteristics which differentiate them from each other. Using a magnifying glass, look to see if the surface of the piece is smooth or lined. Plastic fakes are usually smooth. True ivory, on the other hand, has either crosshatched or parallel lines, depending on the type. Ivory pieces may also have delicate wavy lines.

How the ivory was originally cut is another indication of its authenticity. In the early 19th century, scrimshanders (those who carved scrimshaw) cross-cut their pieces. Newer ones cut theirs parallel.

The most popular and well-known form of scrimshaw came from whale ivory. Whalemen incised designs into the teeth of whales and often carved other pieces and whalebone into useful objects for their wives and girlfriends. Genuine whale ivory appears whiter and smoother than most other types, though whalemen polished even whale’s teeth since ivory isn’t usually smooth in its natural form.

As the whale trade reached across the Pacific, scrimshanders gained access to elephant ivory, which, unlike whale ivory, has a distinct parallel grain. However, if the lines are perfectly parallel, chances are that its fake ivory, made from ground up bone. Another type they used was walrus ivory which has dark spots on its surface.

Other indications of a piece of scrimshaw’s authenticity are the little mistakes and corrections made by the scrimshander as he handcarved it. Some modern fakers use computers and tattoo needles to create their designs, based on those on old scrimshaw pieces.

Those pieces that appear pitted are usually bone. And while not as valuable as scrimshaw on ivory, the craftsmanship is the same, giving scrimshaw on bone a value of its own.

The oldest test for ivory is to try inserting a pin, heated to red-hot, into someplace on the piece that is out of sight. If the hot pin dents the surface, the piece is plastic. If it smokes, the piece is bone.

Another way to test a piece is to look carefully for a single seam that goes all around the piece, indicating where the two molds containing the plastic piece come together. The surface will also appear much lighter in both weight and color which is consistent all over. Ivory tends to vary in color from both piece to piece and on the same piece. Some people claim that by holding a piece of scrimshaw to a person’s cheek, it will feel cool if ivory and warm if plastic.

To date a piece of scrimshaw look for identifying characteristics, in this case two American flags, each with 23 stars. The 23-star flag was only in use from 1820-1822, thus giving a clue to the date of the piece’s creation.

Read more about collecting scrimshaw.

Boil, Boil, Toil and Trouble

QUESTION: I have  a collection of old medicine bottles, all unopened, from a local pharmacy. Most contain narcotics and have the original corks intact in them.  How should I dispose of the contents, mostly liquid, some pills, how to remove the corks to save them, as well as how to clean the bottles without ruining the labels?

ANSWER: Like witches brew, old medicine bottles can contain some nasty substances. Many are extremely volatile and shouldn’t be mixed with any other substance. But before I get to disposing of the contents, it’s important to know what the laws are governing such them.

Collectors of old medicine bottles do so for the bottles, themselves, if made before 1920. They’re especially interested in the bottle shapes. Those who collect bottles made after 1920 collect them for their contents and their labels. Generally, while collectibles, like cereal boxes, are worth more with their contents unopened, this isn’t so with old medicine bottles.
  
Laws governing the sale of containers with flammable, corrosive or poisonous contents have been on the books since 1908.  Cough syrups and other medicines often contain alcohol, classified as a flammable liquid by the Food and Drug Administration (FDA). The penalties are severe for selling bottles containing dangerous substances, especially in today’s terrorist-prone world.

Nationally, it’s the responsibilities of the Drug Enforcement Agency (DEA) to regulate toxic substances and investigate violations. In 1970, Congress passed the Controlled Substances Act, Title II of the Comprehensive Drug Abuse Prevention and Control Act, which became the legal foundation of the government's fight against the abuse of drugs and other substances.

The law is a bit lax when it comes to poisons, such as strychnine and a deadly product called mercury bi-chloride, formerly used as an anti-syphilitic and to clean wounds. So how do you dispose of nasty substances like this?

While most drugs can be thrown in the household trash, you need to take certain precautions before tossing them out, according to the FDA. The agency used to recommend that people flush some drugs down the toilet, but they no longer do since some of these dangerous substances have been found in the soil and water table. One possibility is to pour kitty litter into a plastic bucket and then pour the bottle contents—cough syrups and other liquids—into it. Let it sit for a while, then scoop up the kitty litter into a double plastic bag and toss it into your trash. Make sure you use enough kitty litter to soak up the contents. Do this outside preferably on the day before your trash will be collected.

You can do the same with pills and capsules, but instead of kitty litter, use coffee grounds. Pour the capsules in a Zip-Loc plastic storage bag containing the coffee grounds and mix the pills into them. Seal and place in your trash.

If you’re not sure how dangerous your bottle’s contents might be, you can look up the medicine in an older edition of the Physician’s Desk Reference or the Merck Manual. However, some of these substances, such as mercury bi-chloride, may no longer be used and, therefore, won’t be listed in any of the reference books. If in doubt, check with a local pharmacist.

The easiest way to clean old medicine bottles after you have disposed of the contents is to rinse them with a solution of warm soapy water. Don’t make the water too warm or the label will come loose. If the bottle has any residue or stains in it, especially those with narrow necks and small openings, you can buy a set of inexpensive fish cleaning brushes from your local pet store. If you can’t find these, check the baby aisle in your local drug store for soft bristle baby bottle brushes.
If the stain persists, pour a 50/50 solution of white vinegar and water and let it set for a few hours, then try brushing the inside of the bottle again.

Unfortunately, the corks on old medicine bottles will have absorbed some of the solution and are just as dangerous as the bottle’s original contents, so throw them out. You can reuse those on bottles containing pills.

The Thrill of the Hunt

QUESTION: I’ve been buying most of my antiques at flea markets and in shops. I’d like to go to antique shows, but I’m afraid the prices will be too high. Can you give me some advice?

ANSWER: Though there are all sorts of antique shows out there, I divide them generally into three levels–the friendly firehouse or school show, the more elegant hotel show, and the high-end show.

You’ll find the first of these, the friendly firehouse or school show, held in a local fire company hall or the all-purpose room of an elementary school once or twice a year. Here, you’ll find lots of affordable antiques and collectibles. Prices range from as low as a few dollars up to perhaps three figures. Dealers, mostly from the surrounding region, tend to sell only at shows or out of their homes.

The more elegant hotel show comes around usually once a year and features finer items. Tables often display a myriad of small objects–Japanese Imari porcelains, Wedgewood, fine English majolica, and Staffordshire ware, along with small pieces of furniture, trunks, stained glass lamps, and so on. Dealers tend to come from a wider area, including surrounding states while prices range from two to four digits, with finer items selling for several thousand dollars.

High-end shows are extravagant affairs, both in goods and prices, and feature dealers from all over the country. For some patrons of these shows, nothing says they’ve made it better than bragging about how much they’ve spent on an antique, whether it be a piece of fine 18th-century furniture or a diamond necklace that once belonged to a princess. Just before the recession, patrons at these shows thought nothing of whipping out their checkbooks and writing checks for $30,000 to $40,000 for an Empire sofa or as much as a quarter million for an 18th-century Philadelphia secretary in the Chippendale style.

Many of these shows are vetted, which means the promoters guarantee everything sold there as authentic. Where’s the fun in that? Part of the thrill of the hunt is being able to tell for yourself if a piece is real or not by the knowledge you’ve amassed about it beforehand, especially when the dealer doesn’t have a clue.

And while you can attend high-end shows by paying the heft admission price–going to a good cause, of course–you’ll find the reception from other showgoers rather off-putting. Let’s face it. They have no idea from your worn jeans and casual top that you just inherited a cool million from daddy. The dealers, on the other hand, couldn’t be nicer. After all, they’ll gladly take money from anyone.

Give me the dealers at my neighborhood flea market and firehouse antique show any day. While things may not cost as much at these venues, the dealers love to bargain. And, for me, that’s part of the thrill of the hunt.