The Gleam of Brilliant Glass

QUESTION: My mother loved cut glass. She once had an extensive collection, but sold much of it later in life. One piece, however, did manage to survive and now I have it. It’s a six-inch round,  shallow dish, with a flat bottom and sloping sides and a circular handle. Etched on the bottom is the name J. Hoare & Co. 1853. What can you tell me about this piece?

ANSWER: You have what’s commonly referred to as a nappy, a small serving dish usually made of glass. In this case, it’s one that originated during what’s known as the American Brilliant Period at the J. Hoare and Company glass cutting factory in Corning, New York. The date of 1853 refers to the company’s founding, not the date of manufacture, which was probably around 1900. Your piece carries the etched signature thought to have been used in 1901 and 1902. The company affixed paper labels to pieces produced prior to this time.

American Brilliant Period cut glass was a symbol of elegance. Pieces like this were often given as wedding and anniversary presents in the late 19th and early 20th centuries. American Brilliant refers to cut glass made from the time of the Philadelphia American Centennial celebration in 1876 to the beginning of World War I. J. Hoare & Company was one of the first companies to produce fine cut glass in the United States.

John Hoare, known as Captain Hoare to his business associates, was born in the city of Cork, Ireland on April 12th, 1822, the oldest of a large family of children of James and Mary Hoare. He learned the glass trade with his father in Belfast, and afterwards at the age of 20, left Ireland for England, where, in Birmingham, he worked as a journeyman for Rice Harris at Five Ways Glass Company and for Thomas Webb at the Wordsley Glass Works. Following his journeymanship, he became a foreman and traveling salesman for the firm of Edward Lacey & Son, of Birmingham. He was also foreman for Lloyd & Summerfield, one of the oldest glass houses in England.

In 1848, Hoare went into business for himself. Five years later, he and his family set sail for New York. When he landed, he had just a single half sovereign in his pocket. But being a skilled and experienced glass cutter, he had no difficulty in finding a good position. He soon began work E. V. Haughwout & Company on Broadway, and after a year, with five other men, formed a glass cutting partnership.

After two years Mr. Hoare bought the interests of two of his partners, then organized under the name of Hoare & Burns. This partnership continued until 1855, when he purchased and became proprietor of the glass cutting department of the Brooklyn Flint Glass Company, State Street, Brooklyn.

In 1868, John Hoare moved to Corning, New York, where he, together with Joseph Dailey, one of his original partners from Brooklyn, opened the glass cutting firm of Hoare & Dailey on the premises of the Corning Glass Company, from which it purchased its blanks, or uncut pieces of glass.

When people think of fine crystal today, names like Waterford and Baccarat immediately come to mind. But both of these firms are European. Today, buyers have few choices if they want to purchase fine quality cut glass crystal. But at the end of the 19th century names like John Hoare were at the top of the list because it was American firms like his that produced lead crystal that was far superior to anything made in Europe.

John Hoare became well known for his use of sharp geometric patterns. The light reflects off of these patterns beautifully creating prisms of color, exhibiting what Hoare became known for and what was then considered relatively new, the use of flared cuts rather than straight ones. Pieces produced prior to 1900 are often decorated with single motifs such as strawberry diamond or hobnail while those produced after 1900 are usually more complex. Combinations of three or more motifs are common. The company also created innovative celestial designs, inspired by the arrival of Halley's Comet. Pieces cut after 1910 often incorporate engraved floral and natural motifs. However, Hoare is best known for his earlier work.

John Hoare's experience in England undoubtedly provided the basis for some of the cut-glass designs he produced in this country. Hoare's Wheat pattern, thought to be characteristic of the American Brilliant Period, is a close relative of mid-19th-century cut-glass designs produced in the English Midlands.

After Captain John’s death in 1896, his sons carried on the family business. The firm prospered until World War I, when a shortage of lead crippled the entire cut glass industry. By 1920, the firm had declared bankruptcy.

Although J. Hoare & Company produced cut glass of fine quality during the company's last two decades, the average cut glass from much of this period was often inferior. Final polishing was often neglected or carelessly done, resulting in glass with an "acidy" appearance. Hoare cut glass that had been acid-etched with the company's trademark isn’t necessarily cut glass of fine quality. Your piece fits into this category. The best pieces originated in the late 19th century.

The Quest for Artistic Furniture

QUESTION:  I inherited this chair from my mom but have no information on it. The only markings on the chair are “AT2-232” written with a marker on the bottom of the seat and “678” stamped into the wood on the bottom of the seat. Can you provide any information on the chair?

ANSWER: Your chair is made in the Art Nouveau style. It would have been a dining or desk chair in its day since it doesn’t have a padded seat. The number 678 on the bottom is probably the manufacturer’s model number. Many pieces of Art Nouveau furniture were mass-produced even though your chair looks as if it was handmade.

Art Nouveau or Jugendstil is an international philosophy and style of art and applied art—especially the decorative arts—that was popular from about 1890 to 1910. Art nouveau literally means "new art" in French.

Those two names came Gallerie Maison de l'Art Nouveau in Paris and the magazine Jugend in Munich, both of which popularized the style. Maison de l'Art Nouveau, or the House of New Art, was the name of the gallery opened in 1895 by German art dealer Siegfried Bing that featured exclusively modern art. In 1900, Bing produced an exhibition of color-coordinated modern furniture, tapestries, and objets d’art at the Exposition Universelle. Because his decorative displays became so strongly associated with this style, the style, itself, took on the name of his gallery, "Art Nouveau."

Inspired by natural forms, such as flowers and plants, Art Nouveau was a reaction to academic art of the 19th century and artists used lots of curved lines in their designs.

Though the Art Nouveau movement was innovative, it didn’t last long. It was important in American furniture history, however, because it heralded the end of the dismal darkness that was the close of the Victorian era. Rebelling against the overembellished furniture that flooded the furniture marketplace of the late 1890s, some European designers developed new ideas that found immediate approval with wealthy collectors. They began designing furniture and accessories with simple, flowing, fluid lines, taking their cues from nature, with its motion, curves, and endless cycling. Fairylike tendrils wove in, out, and around the leaves and stems of flowers, fruit, and nuts. The entire effect was one of delicate sensuality and naturalness, with faint overtones of sentimental decadence.

The Art Nouveau years found their greatest expression in accessories, not furniture. This was the era that fostered the whirlwind careers of Louis Comfort Tiffany and others who worked in glass, china, pottery, and metal. Those substances were far easier to shape into the undulating styles of the time than was wood. Most wooden furniture during this period was custom-made and therefore usually of good quality and fine woods, featuring asymmetrical lines, as well as stylized animal and plant forms.

Art Nouveau is a "total" art style, embracing architecture, graphic art, interior design, and most of the decorative arts including jewelery, furniture, textiles, household silver and other utensils and lighting, as well as the fine arts. Artists desired to combine the fine arts and applied arts, even for utilitarian objects, such as tableware, cigarette cases, and silverware. Art historians consider it an important transition between the eclectic historic revival styles of the 19th-century and Modernism.

Three international art exhibitions—the Barcelona Universal Exposition of 1888, the Exposition Universelle of 1900 in Paris, and the Esposizione Internazionale d'Arte Decorativa Moderna of 1902 in Turin, Italy— showcased an overview of this modern style in every medium.

Like most design styles, Art Nouveau sought to harmonize and modernize forms of the Rococo style, such as flame and shell textures. Artists and designers also advocated the use of stylized organic forms as a source of inspiration, and expanded their use of natural forms with seaweed, grasses, and insects.

But unlike the craftsman-oriented Arts and Crafts Movement, the artists of the Art Nouveau Movement  used new materials, machined surfaces, and abstraction in their designs. The stylized nature of Art Nouveau design made it expensive to produce, therefore, only the wealthy could afford it. Unlike furniture handmade by the craftsmen of the Arts and Crafts Movement, that of the Art Nouveau Movement was produced in factories by normal manufacturing techniques. Finishes were highly polished or varnished, and designs in general were usually complex, with curving shapes.

Several notable designers of Art Nouveau furniture were also architects who designed furniture for specific buildings they had also designed, a way of working inherited from the Arts and Crafts Movement. One such designer is Antoni Gaudí, who produced many notable buildings in and around Barcelona, Spain.

The Essence of Comfort

QUESTION: when I was a kid, I remember sitting on my grandfather’s lap in a very comfortable chair. It was designed like a big glove and swiveled on a chrome base with four legs. I don’t know what it was called, but I remember him referring to it as Danish modern. Can you tell me anything about this type of chair?

ANSWER: You were very lucky indeed, for you got to experience the ultimate in Danish design, the Egg Chair, designed by Arne Jacobsen in 1957. But before we explore this chair further, it’s important to know how this design style came into existence.

In 1924,. Danish architect Kaare Klint was asked to teach a newly class in furniture design at the Royal Academy's School of Architecture in Copenhagen. Considered the originator of the modern Scandinavian style of furnishing and furniture design which thrived from the 1940s to the 60s, Klint’s influence on even today’s designs is great.

Using teak, which was plentiful in Denmark, the Danish Modern style began to emerge in the 1920s and soon gained popularity with cabinetmakers in Copenhagen. After 1945, this unique style achieved worldwide recognition and by the mid-20th century, Danish modern had officially arrived.

The son of Peder Vilhelp Jensen-Klint, the leading Danish architect of the early 20th century, Kaare Klint studied painting and apprenticed to several architects, including his father, before opening an independent furniture design studio in 1917.

He became the first Danish designer to combine function with Danish hand-craftsmanship. His drawings revealed an attention to the needs of the human body, long before the science of ergonomics came into being.

For instance, in order that his sideboards would be the most efficient, he determined the average dimensions of the cutlery and crockery used in a Danish home. Klint then created a case containing the smallest space required for the maximum amount of cutlery needed by a household. Aesthetically, he allowed the unvarnished teak to speak for itself, maximizing its clean beauty by waxing and polishing. And so Danish designers began using natural finishes for their pieces.

Klint is known as the grandfather of modern Danish design. He, more than any other Danish furniture designer, felt that it was important to understand the craftsmanship of the furniture of the past.

He pioneered in anthropometrics, which correlates measurements of the human body to make furniture better suited to man’s physical characteristics, essentially the essence of today’s ergonomics. In 1933, he created a deck lounge chair, which he outfitted with a removable upholstered mat and pillow.

America's initial fascination with Danish modern furniture was largely the result of Edgar Kaufmann Jr. of the Museum of Modern Art in New York. He returned from Europe in 1948 with photographs of chairs designed by another Danish  architect, Finn Juhl. The interest in Juhl's furniture led to a collection designed by him for the Barker Co.

Presented in 1951, the collection introduced American designers to the structural and decorative combining of woods of various colors and grains. Highlights included a teak armchair.   

Fruitful collaboration between designers and cabinetmakers led to more industrialized production. By 1950, a few factories in Denmark began producing furniture using purely industrialized methods. The new generation of designers included Arne Jacobsen, whose creations, while organic in nature, used materials such as light metals, synthetic resins, plywood, and upholstered plastics.

Graduating from the Royal Academy in 1924, Jacobsen soon demonstrated his mastery of both architecture and furniture design. With the completion of his Royal Hotel in Copenhagen with all its fittings and furniture in 1960, his talents became widely recognized.

Jacobsen's most commercial success was the Ant chair, which was available in a number of materials, including natural oak, teak and rosewood veneers, colored finishes or upholstery. Inspired by American legends Charles and Ray Eames, this unique chair was considered revolutionary in 1952, having only three spindly legs, no arms, and a one-piece plywood seat and back. The design of this chair became the basis for the stackable chairs used in hotels and conference centers today. Jacobsen followed the Ant with Series 7, a chair that had four legs and optional arms. Initially designed in 1955, and still being produced today.

Most of Jacobsen’s designs were the direct result of his belief that architecture and furnishings should be totally integrated. Two of his commissions—the Scandinavian Airlines Terminal and the Royal Hotel in Copenhagen—resulted from the creation of the uniquely shaped chairs, the “Egg” and the “Swan.” Designed in 1957, these modernistic chairs featured hi-density, rigid polyurethane foam, upholstered on single-seat shell construction. Both are extremely comfortable while being ergonomically sound and pleasing to look at.

There was a period of time in the middle of the 20th century when Danish designers were the world's most admired. Some of the most talented earned prizes at major competitions, and their works were quickly acquired by top European interior designers and collectors. Today, American designers see them suited to many different kinds of interiors.

Ladeez and Gentlemen! Welcome to the Greatest Show on Earth

QUESTION: When I was a kid, I loved going to the circus with my parents each Spring. There was something exciting and foreign about it—the unusual animals and the performers who seemed to come from all over the world. A while back, I purchased an old circus poster from the Barnum and Bailey Circus and have it hanging on the wall in my den. But I know nothing about it. A friend told me the U.S. Post Office recently issued a new set of stamps featuring circus posters. My interest has been rekindled all over again. What can you tell me about them?

ANSWER: Circus promoters referred to circus posters as "bills" from the early use of handbills, paper, or later, "lithos", whether printers produced them using lithography or not.

Circus owners recognized the notion that "a picture is worth a thousand words." So they incorporated illustrations, which early on took the form of wood engravings, or in some cases cruder woodcuts. Engravings from mahogany blocks, however, were difficult to make and expensive, so printers used them sparingly and repeatedly. The same images would be used over and over again, often for different shows, thus originating the concept of "stock" posters. Circuses produced early show posters in mass, using a single design, often with only a printed title. Other information, such as dates and locations would be handwritten or stamped with ink by circus advance men.

By the 1860's more circus owners embraced the poster as their main means of promotion. And by 1880, the Golden Age of the circus poster had begun.
   
The actual production of circus posters from idea to finished product was a team effort. Some of the most talented artists of the day designed circus posters, but most didn't sign their work. In fact, most printing companies created circus posters as production art--much like the "original oil paintings" available at Airport Hotel Sales. Any number of artists might work on the overall design of a poster. Often, specific artists specialized in certain subjects. For example, a single artist might specialize in lettering while another specialized in horses, and yet another in performer portraits.

Circus posters can be divided into two categories—stock or specialty. Stock posters, generic designs that could be used by any circus, included images of clowns, wild animals, performers, etc.. Show printers would print large runs of stock designs and store them, making them the most inexpensive. Circus owners could pick these out of catalogs and have their show's  title printed on them. It wasn't uncommon for more than one circus to use the same poster designs in the same season. Printed stock posters might remain in storage for years until a printer sold them to a circus to be used. Often posters used during a specific year had actually been printed decades before.

The dimensions of circus posters are important in dating them. Originally, printers based the sizes of posters on the size of their printing press beds, which varied widely. Eventually, printers standardized a unit of measure called a "sheet"at 28" by 42", basing these dimensions on the dimensions of a lithographic stone a single man could handle or carry.

The most common were "one-sheets," followed by "half-sheets" measuring 28"x  21".  "Flats" had a horizontal format, while "uprights" had a vertical orientation. Printers also produced various multiple sheets, with corresponding multiple dimensions. They produced larger multiples in rare instances, including 100-sheet posters and larger. Printers determined the kind of bill by the combinations of sheets.

Even though printers produced circus posters cheaply by the thousands, they used high quality medium weight woven paper, usually bleached to a bright white color, even though posters were printed in volume and used briefly. Also, printers used oil-based inks for printing circus posters because they were often hung outside.

In the mid-1970's, Ringling Brothers and Barnum & Bailey adopted a policy of using only a single poster design for each edition of their circus, often incorporating a variety of featured acts or attractions in the design. By the late 1970's, few circuses even used posters, and many shows opted to use window cards only, which could be placed indoors or simply be stapled to telephone poles outside.

Probably the greatest image ever produced for a circus poster design was that of a leaping tiger, designed by the noted illustrator Charles Livingston Bull in 1914. This particular image may well be the most recognizable circus image in history, and it’s still in use today, often appearing in set and costume designs in current productions of the Ringling Bros. and Barnum & Bailey Circus. Bull's original poster image, however, doesn’t bear his signature.

Generally speaking, circus posters can sell anywhere from $30 to $375.  With such a broad range, collectors must take the specific circus, date, and condition into consideration. At the low end might be a mint Famous Cole 3 Ring Circus poster with black type on yellow stock for $30. At the high end might be a rare Cole Bros. Circus from the Erie Litho. & Ptg Co., of Erie, Pennsylvania, bearing the title, “Cole Bros. Circus Presents Quarter- Million Pound Act of Performing Elephants–The Most Colossal Train Animals Display Ever Presented” for $375.

Although circuses continue to thrill youngsters, much of the promotion is now done using T.V. and radio ads and discount coupons handed out in supermarkets. The days of posters plastered on the sides of buildings are long gone.

A Sign of Welcome

QUESTION: At a number of Americana antique shows I’ve attended, I’ve seen pineapples used as decoration, especially on pieces of furniture from the 18th century. Can you tell me why cabinetmakers used them so much?

ANSWER: Pineapples have long been associated with Southern hospitality. Many people associate pineapples with Colonial Williamsburg. Perhaps that’s because it began decorating with them in the 1930s. But the idea didn’t start there.

Christopher Columbus discovered pineapples in 1493 on the Caribbean island of Guadeloupe. Since the fresh sweet fruit wasn’t available back home, his crew looked on it with awe and wonder. In Renaissance Europe, fresh fruit was seldom available. Common sweets were also rare. Sugar derived from cane was expensive and had to be imported from the Middle East and Asia.

In the West Indies, however, pineapples were a plentiful native fruit. So much so that the locals used it to both warn away intruders and welcome guests. They planted barriers of pineapple around their village because they believed their sharp, spiky leaves deterred unwelcome visitors. But they also hung the fruit on their gates as a symbol of hospitality and abundance.

Columbus and his men brought these sweet, succulent fruits back to Europe where they became instantly popular. But not everyone embraced the spiky fruit. When Charles V, King of Spain and Holy Roman Emperor had an early opportunity to taste the pineapple, he refused, fearing that it might poison him.

In 1657, Captain Richard Ligon published A True and Exact Story of Barbados, an account of his travels from London to the West Indies. In his journal, he devoted entire pages to the pineapple.

Diaries of the time often recorded gifts of pineapples presented to the king, and late 17th century ship manifests listed pineapples making their way from Barbados and Bermuda to England.

European gardeners perfected a hothouse method for growing pineapples, and in 1675, John Rose presented King Charles II of England with the first pineapple grown in England. The king later posed for an official portrait of him receiving the pineapple as a gift. The act was symbolic of royal privilege.

During the 18th century in England, greenhouse gardening became a popular hobby for the nobility, who coveted pineapples. The fruits often served double duty at dinner parties, first as an elaborate table decoration, and then as dessert.

The Spanish were probably the first to adopt the pineapple as a symbol of hospitality, carving pineapple designs into much of their woodwork: The custom soon spread throughout Europe, where it became fashionable to incorporate pineapple motifs into furnishings. Eventually, cabinetmakers adorned tall case clocks with pineapple finials. This custom continued into the early 20th century.

Sea captains, who sailed to the Caribbean Islands and returned to the New England Colonies with cargoes of fruit, spices and rum, first introduced the pineapple as a symbol of hospitality in America. Upon their return, the captains would spear a pineapple on the fence post outside their home, where it would serve as an invitation for friends to visit and share their food, drink, and tales of adventure.

Before long, American innkeepers adopted the pineapple as a means of welcoming guests. Inns would feature pineapple motifs on their signs and advertising literature, while pineapple-related items within their establishment included carvings on bedposts, vanities and dressers along with furniture, brasses, doorknobs, lamps and candleholders.

American architects also embraced the pineapple. Early estates and public buildings often have carved wooden or stone pineapple gate posts and copper or brass pineapple weather vanes. One such example is the home of Virginia's William Byrd. In 1730, Byrd ordered a carved door surround from London for his Westover plantation mansion on the James River. The door featured a broken-scroll pediment with a pineapple in the center.

The pineapple continued to find its way into home decor. Carpets, draperies, napkins and tablecloths often had pineapple designs woven into them. And women stitched pineapples into their quilts and needlework.

9 Ways to Help Identify Antique Furniture

QUESTION: Some friends of my mom’s gave me what looks like a Chippendale desk. They didn’t know anything about it, so I’ve had to do some research on my own. The only problem is that I can’t seem to find out much about it. Can you please help me out?

ANSWER: Not only will I try to tell you something about your desk, I’d like to give you and others some tips on what to look for when trying to identify antique furniture.

First and foremost, you need to determine if the piece you have is really an authentic antique or whether it’s a reproduction, a revival piece, a fake, or just a piece of junk. The key to the history of valuable antiques is whether they have a provenance—a history of ownership. This document lists the maker, all the owners to the present, and whether any repairs have been done to it. If you were spending five or six figures for a piece of furniture, you certainly would want to know everything you can about it.

But what about everyday pieces that don’t come with a provenance. Identifying them is a bit more difficult. Follow these steps and you should be able to determine quite a bit about any older piece of furniture that you have.

1. Determine the style. Using photographs in antiques books and photos online, try to determine the style of your piece. Certain styles, such as Chippendale, have telltale features, such as ball-and-claw feet, that help to identify them.

2. If it’s not authentic, determine if your piece is a revival or a reproduction. The difference between a revival and a reproduction is quite simple. The first is stylized version of the original style. So Colonial Revival furniture represents stylized versions of true 18th-century American Colonial pieces. A reproduction, on the other hand, is an exact replica of the original, often made of the same type of wood, using the same woodworking techniques.

3. Determine its age. Check to see if it has any nails or screws. An original Chippendale desk would have been assembled with pegs and mortar and tenon joints. Does it have any manufacturers labels anywhere? If so, then it’s definitely a Colonial Revival piece or even a fine reproduction from the mid-20th century.

4. Check any drawers for dovetailing. You can usually tell if the dovetails are handmade or done by machine. Those done by machine are very regular and even and can usually be found on pieces after about 1870.

5. Look inside the drawers or pullouts and see if the maker used the same wood—for example, mahogany. Later versions will have used some sort of fruitwood---pear, apple, or even poplar---for the drawer backs and sides. If its an older piece, the drawer bottoms will be made of a thinner version of the same wood.

6. Does the piece have decoration that isn’t in keeping with its style? Look at the detailing on your piece of furniture. Does it have added knobs or edging that doesn’t seem to go with the style of the piece. Often one of the owners of the piece may have added these to make it more up to date. The opposite also applies. Can you tell if any details have been removed for the sake of updating?.

7. Have any repairs been made to the piece? Look for signs of glue, nails, or screws that seem newer than the piece, itself. Also look for replaced wood panels, veneer, or detailing, such as finials.

8. Has the hardware been replaced or is it original? You can usually tell if hardware has been replaced. For instance, you’ll often see chests of drawers sporting glass or brass knobs. Originally, these chests usually had wooden knobs, but antique dealers, in an effort to make them more attractive to decorators, replace the original knobs with glass or brass ones. It’s actually better to replace missing original knob with a reproduction rather than replace the entire set with hardware that wouldn’t have been originally on the piece.

9. Were you told anything it about it? Did the seller or the person who gave you the piece tell you anything about its past? Did you ask them?

By studying the closeup photos that accompany this blog, you’ll notice the following about this desk.

First, your desk is definitely from the late 19th century---I’d say probably the 1880s, based on the 1886 mark you found. Second, the dovetails are definitely 19th century. But the real signs are the nails or screws that appear in one of the photos and the rather poor craftsmanship of the carving and joining. In an authentic Chippendale, the wood would be perfectly matched---the top of the leg where it joins the desk is a good example. Also, the stain would be even. I believe this piece had been refinished at some point, and not very well. I can tell that from the molding closeup from the front rim of the desk. And the last sign is the carving, itself. The little stars were stamped in. No 18th-century craftsman would have ever done that.

When asking someone to help you identify a piece, it helps if you take closeup photos of certain parts of the piece—hardware, dovetails, inside of drawers, carving, repairs, even the back.

What About Early Boob Tubes?

QUESTION: While helping a friend clean out his attic, I discovered he had an old television set. Though it was covered in dust, it looked like it may have been from the 1950s. When I asked him if I could have it, he said “Sure, I don’t want that piece of junk.” But now that I have it, I’m not sure what to do with it. The screen seems to be suspended in a U-shaped ring which sits atop a box with control knobs. It bears the name Philco Predicta.

ANSWER: You have one of the prime post-war television sets, dating from 1959. This famous set had a rather bad reputation. Although collectors love them for their sleek modern look, they couldn't overcome their performance problems. In fact, they often caught on fire. So you probably shouldn’t think about restoring it to working order.

But to truly understand the evolution of television sets, you need to understand a bit about their early history. In 1908 Alan Archibald Campbell-Swinton, fellow of the Royal Society (UK), published a letter in the scientific journal Nature in which he described how "distant electric vision" could be achieved by using a cathode ray tube as both a transmitting and receiving device.

Originally, televisions were mechanical and simpler, consisting of a motor turning a spinning disk and a neon lamp. Scotsman John Logie Baird and American Charles Jenkins perfected the mechanical system in the mid-1920s. The projected image was only business-card size, but a magnifier enlarged the image.

Though Philo Farnsworth was working on an electronic television system in San Francisco during the late 1920s, it was engineer Vladimir Zworykin, a Russian immigrant working for RCA, who claimed the invention. However, the U.S. Patent Office gave the nod to Farnsworth in 1934 and RCA agreed to pay Farnsworth $1 million over the next 10 years to use his patents.

It's generally accepted that the 1938 DuMont Model 180 with a14-inch picture tube was the first commercially available electronic TV set in the United States. The 12-inch 1939 RCA Victor TRK-12 followed soon after, launching it at the 1939 New York World’s Fair. In the set’s brochure, RCA claimed   the receiver would allow an average family to see a program simultaneously at a cost for electricity of about one cent per hour. Viewers actually watched the image on a mirror because the long picture tube was mounted vertically in the cabinet.

RCA dominated the pre-war U.S. television set production, as well as the postwar technology, until about 1948.

Color T.V. sets appeared in the mid-1950s. RCA began to manufacture the first "mass-produced" color TV in 1954, the CT-100, called "The Merrill,"and also licensed its technology to 70 competing manufacturers. However, Westinghouse beat it to market with its H840CK15, a 15-inch set priced at $1,250. The company produced only 500 and only a few of those sold.

The CT-100 debuted at $1,000, about $7,400 in today's dollars, a bit pricey for the average American household. Within months, RCA reduced its price to $495, then the company recalled most of them and swapped them out for a 21-inch model. Fewer than 5,000 CT-100s made it to retail stores and fewer sold. Only about 75 exist today, perhaps 25 in working condition. If you can find a CT-100, you'll pay about $5,000 for it.

Even so, by the end of 1957, only 150,000 color sets had sold. That’s because there wasn’t much to watch in color at the time. The first national color broadcast was of the 1954 Tournament of Roses Parade from Pasadena, California. But only a handful of TV studios were capable of color broadcasting, with the transition to color by local TV stations done slowly on a market-by-market basis. By 1960, only RCA remained producing color sets.

Things changed dramatically with the premiere of NBC's Sunday night Walt Disney's Wonderful World of Color in September 1961. Other major shows followed in the 1960s and color sales began to surge and competition roared again. CBS began regular colorcasts in the fall of 1965, and NBC became the first 100 percent color network in 1966. In 1967, sales of color TVs surpassed sales of black-and-white sets.

After a lengthy duel to the death over which color technology would rule in the United States, CBS's partially mechanical color system or RCA's all electronic one—RCA emerged victorious. The broadcasting industry adopted the National Television System Committee's electronic color TV system, which was compatible with existing black-and-white T.V. broadcasting in the early 1950s and is still used today.

Though T.V. sets in the 1960s used vacuum tube electronics, that all changed by the early 1970s when solid-state electronics appeared on the market. This allowed for significantly more reliable televisions with better picture quality.

Most collectors want TVs from the 1930s and 1940s just the way they are. However, non-collectors want sets from the 1950s and 1960s that have been color converted to go with their 1950s or 1960s retro decor and in working condition.

There are millions and millions of discarded sets out there, so not all will be worth collecting. But there are key sets throughout each decade that collectors want to own, including newer ones from the 1970s and 1980s. You can pick up an early postwar set on eBay for $100 to $300. With newly made replacement parts and a good supply of new old-stock vacuum tubes available, you might take a stab at restoring one yourself.

Simply Elegant Find

QUESTION: Some time ago, I purchased two wall pockets decorated with a matte green glaze in an antique shop while on a routine antiquing foray. Each has the word “Teco” stamped on the bottom along with a number. I have these hanging in my kitchen, but know little about them. Can you tell me anything?

ANSWER: You’ve stumbled on a real find. What you have are good examples of what’s known as Teco Ware, a type of art pottery produced in the beginning of the 20th century. While pieces originally sold for $2 to $5, none sold for more than $30 because the maker’s goal was to produce something of beauty that the average person could afford.

The Teco Pottery began in 1879 when attorney William Day Gates started the Spring Valley Tile Works in Terra Cotta, Illinois, to make drain pipe. But his goal changed after visiting the World's Columbian Exposition in nearby Chicago where he viewed exhibits of new matte glazes, produced by French potters. After his factory was nearly destroyed in 1887, he decided to rebuild, naming it the American Terra Cotta and Ceramic Company. When it reopened, he began working on an art pottery line after conducting experiments using local clays. In 1895, Gates registered the Teco trademark, deriving the name from the first two letters of his company's name, the Terra Cotta & Ceramic Company. He introduced a line of art pottery in 1899.

He derived his pottery shapes from line and color rather than elaborate decoration. While he created most of the 500 shapes he offered by 1911, many of the remaining Teco designs came from several Chicago architects that practiced the Prairie School style, including Frank Lloyd Wright. They had rejected the revival styles of American architecture of the 19th century in favor of using wood, stone and clay in simplicity of design. Ornamentation merged gracefully with the form. By 1923, the number of shapes had increased to more than 10,000.

Gates’ son, Major Gates, a ceramic engineer, invented a pressing machine and tunnel kiln, and also a glaze spraying apparatus called a pulischrometer to make production more efficient. In 1918, they acquired Indianapolis Terra Cotta Company. And the following year, opened a branch in Minneapolis.

Teco started making their green architectural vases in 1901, well before other art potters in the country produced similar wares. That’s why Teco vases are so valuable today. Gates produced his pottery from clays in Illinois and Indiana, and forms ranged from organic to architectural to geometric.

Teco pottery comes in hundreds of shapes, all cast from molds. Even exotic shapes that look handformed aren’t unique. The type of shape directly affects the value, with scarcer taller shapes more valuable. Gates marked the bottom of each of his pieces with a large “T” followed by the letters “ECO” and incised or stamped the shape number below it.

Gates’ goal was that every American home should have at least one piece of Teco ware. He believed that good design was as critical as the quality of materials and workmanship. So while some of Teco's more interesting pieces had at least some hand finishing, all of the pieces started with modern production techniques, including molds and power glaze sprayers.

Although Gates commercially introduced his line of Teco art pottery to the public in 1902, mass marketing of his products didn't really take effect until 1904. The event was the St. Louis World's Fair, where he exhibited vases, planters and other wares.

Gates exhibited art pottery with a green microcrystalline glaze which received many awards. It would also be the only glaze he used for several years. And although he introduced glazes in other colors–-including shades of yellow and gold, brown, cream, gray, orange, maroon, blue, gray, blue and purple—in 1909, none were as popular as those in various shades of green.

The most desirable pieces have been enhanced with a charcoal overglaze. Decorators used this secondary charcoal glaze to emphasize the negative space in embossed decoration or to highlight the detail found. in pieces with attached handles. Pieces with lowlights, or those that are mostly charcoal black are particularly striking.

Teco's organic pieces, an aesthetic blend of Art Nouveau and Prairie School featuring leaf and floral motifs, are more interesting, and as such, command higher prices than the geometric ones. The finest examples feature details such as swirling tendril and whiplash handles and/or embossed designs.

The typical Teco vase sold for $2-$5, while larger cost $7-$20. Today, that $2-$5 vase sells for a few hundred dollars, with fine examples commanding several thousand dollars. Major pieces that feature considerable hand finishing fetch anywhere from $20,000 to$100,000. But the majority of Teco vases and bowls sell for $500 to $2,000. However, there are plenty of rarer forms that can go for $10,000 or more. And even though the company produced pieces in other colors, collectors favor those in green.

Your modest wall pockets sell for about $1,500 a pair—a real find.

Wearable Beauty

QUESTION: My mother has a beautiful silver bracelet that my dad gave to her on their tenth wedding anniversary. The letters GJ are inscribed on the inside. I’ve always admired this bracelet and hope that one day it will be mine. Can you tell me who made this bracelet and perhaps something about it.

ANSWER: Your mother’s bracelet comes from Georg Jensen Studios in Copenhagen, Denmark, although I’m sure your dad purchased it at one of the company’s retail stores here in the U.S. Jensen is one of the premier jewelry companies in the world and continues to be known for its unique jewelry designs.

                           
Born in 1866, Jensen was the son of a knife grinder in the town of Raadvad north of Copenhagen. He started training to be a goldsmith when he was 14 as an apprentice with Guldsmed Andersen. But in 1884, he decided to study sculpture at the Royal Academy of Fine Arts. Jensen had dreamed of being a sculptor ever since childhood. In 1887, a plaster bust of his father gained him admission into the Royal Danish Academy of Art. He exhibited his first sculpture at the 1891 Charlottenborg Spring Exhibit in Copenhagen and graduated the following year.

Although his clay sculpture was well received, making a living as a fine artist proved difficult, so he turned his hand to the applied arts. First as a modeler at the Bing & Grøndahl Porcelain Factory and, beginning in 1898, and then with a small pottery workshop he founded in partnership with Christian Petersen to make ornamental ceramics. Their ceramic jug, The Maid on the Jar, was selected for the arts and crafts exhibit in the Danish Pavilion at the 1900 World Exhibition in Paris. The public and critics loved their work, but sales weren’t strong enough to support Jensen, who his point a widower, and his two small sons.

Through his ceramic work, Jensen received a travel grant award which allowed him to tour Europe at a time when the Art Nouveau movement was in full force. The work of these artists in beautiful, yet useful, objects inspired him. Upon is return Denmark, he became increasingly involved in designing and making jewelry. In 1901, he took a job as the foreman for goldsmith Mogens Bailin. Finally, in1904, he opened his own small shop in Copenhagen, employing an apprentice and a helper.

Jensen's early designs were primarily in the tradition of Arts & Crafts, with an emphasis on hand-beaten surfaces' and semi-precious stones. This was a time when the cost of materials was high, and wages for skilled labor was low. The stones Jensen selected---amber, moonstones, lapis lazuli, green agate, garnet, ebony, hematite and small bits of coral—were relatively inexpensive.

Georg Jensen never followed fashion, he created it. He opened his first retail store in Berlin in 1909. In 1912 he expanded his workshop and opened a large retail shop in Copenhagen. It's also important to note that from the beginning, he laid the groundwork for Georg Jensen as a brand, versus that of one artist, hiring talented artisans, craftsmen and designers. When other studios gave no credit to their designers, Jensen always did.

Jensen's training in metalsmithing along with his education in the fine arts allowed him to combine the two disciplines and revive the tradition of the artist craftsman. Soon, the beauty and quality of his Art Nouveau creations caught the eye of the public, assuring his success. Before the end of the 1920s, Jensen had opened retail outlets in New York, London, Paris, and Stockholm.

In 1905, he held his first exhibition outside Denmark at the Folkwang Museum in Hagen, Germany, and the museum purchased a number of his designs. In 1910, he received a gold medal at an exhibition in Brussels.

What really catapulted him to international fame, however, was his first U.S. exhibition at the 1915 Panama-Pacific International Exhibition in San Francisco. In addition to being awarded more gold medals, an entire showcase of jewelry was purchased bythe newspaper magnate William Randolph Hearst.

At the time of his death in 1935, the New York Herald Tribune proclaimed him as "The greatest silversmith of the last 300 years.” His vision lived on through the employees he had trained and his small workshop developed into a worldwide company. Designers like Henning Koppel, Vivianna Torun Bulow-Hube, Manna Ditzel, and Arno Malinowski brought the company to the forefront of international design.

There has been no designer with the sustained appeal of Georg Jensen. His work continues to attract top collectors and museums throughout the world feature his pieces. For five generations his legacy has grown, unrivaled by any other 20th century creator. He is, quite simply, unique.

As Delicate as Lace

QUESTION: My aunt collected Dresden lace figurines for years. She died recently and left her collection to me. Unfortunately, I know next to nothing about these porcelain figurines, except that they came from Dresden, Germany. What can you tell me about them? Also, I’d like to maintain the collection and have no idea how to care for them. They seem so delicate.

ANSWER: Dresden lace figurines have captured the imagination of collectors for years because of their fragile beauty and grace. These delicate figures have been produced by many different German companies from the late 19th century to the present and shouldn’t be confused with the famous porcelain Meissen figurines.

Confusion about Meissen and Dresden porcelain has reigned for over 200 years. The Royal Saxon Porcelain Factory (now known as Meissen) first opened in 1710 in Dresden, Germany. A year later, it’s owners moved it to Meissen, Germany, where it remains today. During the 18th and 19th centuries Meissen porcelain became known as Dresden China in England, Canada and the United States. These lace Dresden figurines are completely different.

Between 1850 and 1914, as many as 200 decorating studios in and around Dresden created a "Dresden" style, a mixture of Meissen and Vienna. While some studios produced high quality pieces that outdid Meissen, others made inferior copies.

Most Dresden-style figurines aren’t as solid as those produced at Meissen. The makers of authentic Meissen figurines pressed porcelain clay into molds, making solid finished pieces. The makers of the  Dresden-style figures, on the other hand, made their pieces by pouring liquid porcelain or "slip" into plaster molds. Because the plaster absorbed the liquid near the sides, a thin wall of partially hard porcelain built up against the outline of the mold Then they poured the remaining slip out of the mold. The resulting impression was thin, hollow, and light in weight. Thus Dresden figures are less costly to produce than those of Meissen.

Meissen first introduced porcelain lace, the most distinctive feature of Dresden figurines, in 1770 as a fancy addition to the dress of some figures. Makers used small amounts to decorate collars and sleeves. In the late 19th century, various Dresden studios developed figurines in elaborately flounced lace skirts and dresses.

The lace was easy to produce. Workers dipped real lace into liquid porcelain, then cut and applied it to the figure in the desired position. During the firing process, the real lace threads burned away, leaving a replica of the mesh in the porcelain.

Dresden figurines also possess an abundance of delicate, applied flowers adorning the gowns, hair and base of the figures. Artists created these tiny leaves and flowers petal by petal, then individually applied them. Some pieces also had a hand-whipped, grouty bisque applied to the base to simulate grass or moss. The best examples appear on figures produced by the Carl Thieme Factory of Potschappel. In 1972 the company became the VEB Saxonian Porcelain Manufactory Dresden. Today, they’re the only official producer of Dresden china in Germany.

The most beautiful and sought-after Dresden pieces are the large figure groups made in the style of 18th-century Meissen. These so-called "crinoline" groups often portrayed court life and the diversions of noble people, such as playing musical instruments or doing the minuet. Avid collectors of Dresden figurines also seek groups that include animals such as Russian wolf hounds, as well as love scenes.

Many collectors love the Dresden ballerinas, each featuring tightly fitting lace tutus, as well as Spanish Flamingo dancers with their skirts of ruffled lace.

As with any antique or collectible, condition is probably the most important factor to consider. Examine the piece carefully for chips or small flakes, as damaged pieces lose 50 percent or more of their value. Because the lace is so fragile, you should expect a small amount of loss. However, be wary of pieces with large holes or breaks in the lace because it's virtually impossible to repair porcelain lace. If the piece contains many applied flowers, a small chip or two on a petal or leaf is acceptable.

The next thing to consider is quality. Do you like the face? Are the fingers slender and separated from one another? Is there much hand-painted decoration on the costume? Are the colors pleasing? How lifelike does the figure or group of figures appear?

You’ll need to take extra special care with your Dresden pieces. Because the lace and applied flowers are so fragile, use care in handling them. Keep them in a glass case or china closet to prevent them from getting dusty. If you must clean them, use a feather duster or carefully submerge them in a mild detergent and warm water. Gently pat dry the figure and blow dry the lace.

Puff, Puff, Puffing Along

QUESTION: I’m an engineer who has recently retired. Not long ago, I saw some steam-powered toys on display at a local antique show. The dealer couldn’t tell me much about them except that they were produced in the latter part of the 19th century.  I’m fascinated with these toys and would like to start a collection. What can you tell me about them?

ANSWER: Live steam-driven toys have always fascinated young boys and men. It’s probably because of the power they produce and that they’re often so close to the original devices that use steam power to operate.

The use of steam as a power source dates from the early 1840s. By the mid-19th century, steam-powered toys began to appear. Craftsmen hand built toy steam engines for the first 50 years or so and definitely for those who could afford their high price tag. Cheaper models began to appear in the 1870s. By that time, makers constructed stationary engines with the boiler in either a vertical or horizontal position, although the functions of each were essentially the same. The vertical model fit into a smaller space while the horizontal model allowed greater size and power. Though toy engines were often faithful duplicates of the real thing, they rarely had the detail of true scale models.

Such famous toy makers as Bing, Doll and Marklin produced steam-powered toys in Germany. The British manufactured some beautiful examples under the label of Bassett-Lowke. In America, Eugene Beggs of Paterson, New Jersey turned out these mechanical wonders from the 1870s to about 1900 in competition with the famous Ives company of Bridgeport, Connecticut. The best known of all the American firms was the
Weeden Manufacturing Company which manufactured steam-powered toys from  1883 to 1930 in New Bedford, Massachusetts. Other manufacturers included Mamod, Wilesco, Cheddar, Krick, Tucher & Walther, Hermann Bohm, and Blechspielzeug.

The boiler of a steam toy had to be carefully filled with mineral-free water, often from a rainwater barrel. Most of the burners or lamps used alcohol as fuel although manufacturers advertised a few that burned kerosene.

Both substances were highly flammable but not explosive in the open air. Once the user lit the burner and shoved it into place beneath the boiler, it was just a matter of waiting while steam formed in the boiler and pressure gradually increased. When steamed up, the throttle opened, wheels began to spin, and pulleys operated the accessories. And, of course, every steam engine came with a whistle.

Steam-powered trains were a bit more complicated. Many became known as "dribblers" because water often leaked from the boiler. Though the user set a throttle in advance,  there was tittle or no speed control once the locomotive got under way. Once steam had built up, the user set the train on the tracks and let it go until the fuel and water ran out. Often the engine would fly off the rails on a tight curve, spilling the water and burning alcohol. Makers advertised these trains as “safe” toys, since they rarely blew up unless an ingenious boy locked down the safety valve. However, the engines got very hot, enough to produce a nasty burn. Since boys often set up these trains on their mom’s carpet, a derailment and spill often resulted in a good scolding.

Steam-powered boats, on the other hand, were graceful toys, often beautifully constructed of brass. Manufacturers built them around a horizontal boiler with a burner beneath. Steam traveled through a pipe to a cylinder and piston which operated the propeller shaft. An adjustable ruder provided some control but there was always a risk of losing the boat once it got under way. Boys could purchase flimsy tinplate steam motorboats in dime and novelty stores. This toy had a burner and boiler but no cylinder. The steam traveled directly to the stern of the boat and exhausted underwater, propelling the boat until all the steam was used up. Boys called them "put-puts while they referred to more elaborate models as propellers.

By 1886, a boys could purchase a toy steam engine with a vertical boiler from Montgomery Ward for 40 cents plus a nickel for postage. Larger horizontal engines with a walking beam and a flywheel sold for $2. From the same catalog, boys could order a toy steamboat in the 9-inch size packed in a "neat wooden box" for $1.25 or a 13-inch model which ran about 20 minutes for $2.60. In 1888, Ladies' Home Journal provided a Weeden upright steam engine made from 41 pieces at no cost with a subscription. Or the lucky young person could buy an 11-inch steamboat directly from the magazine for $1.50 postpaid.

In 1889 it was possible to buy an upright steam engine from Ward’s catalog for 20 cents but more elaborate engines cost as much as $11. A popular steam toy that year was the Model Steam Fire Engine, with a vertical boiler, single oscillating cylinder, and a pump which spewed water quite a distance.This toy was very similar in appearance to the formidable horse-drawn prototypes which dashed through city streets on their way to a fire, spouting smoke, sparks and steam. The same year boys could also purchase a complete steam train, which ran on a circular track for about 20 minutes with each filling of water. It sold for $8 and came complete with a brass locomotive, two cars, and track.

The British firm of Bassett-Lowke also produced model steam locomotives. One gauge available was 1 1/2-inch, which was close to the present "0" gauge while others came in a  gauge twice as wide. The models ranged from stubby switchers to scale  versions of famous locomotives. In 1902 this firm also offered an elaborate model steam fire engine, as well as a tractor roller, several cranes, and two models of motor cars, all steam powered. 

The early 20th century brought little change in the design and appearance of steam-powered toys. One major innovation was the introduction of electricity as a heat source. As household electricity became more prevalent, the stationary steam engine gradually switched from alcohol burners to electric heating elements. A Weeder model in 1930 came with a 110-volt heating element. The company still made alcohol-burning versions and one hybrid was available with either a two-burner alcohol stove or an electric heater.

Today, some models, such as the 1909 Marklin steam-powered boat, sell at auction for thousands of dollars, putting many steam-powered toys out of reach of many collectors.

ted with these toys and would like to start a collection. What can you tell me about them?