Waxing Your Way to Protection

 

QUESTION: I have quite a few old pieces of furniture, some of which are antiques. I’m never sure what to use to clean and polish them. Can you offer any advice?

ANSWER: You’re not alone. Many people don’t know what type of cleaners and polishers are appropriate for antiques and end up using the wrong thing.

Before you can figure out what type of cleaner and polisher to use on your furniture, you first have to know what sort of finish the maker used on it. The most common finishes found on antique furniture are waxes, oils, shellacs, and varnishes. Not only do these finishes bring out the beauty of the wood's grain and color, but they also protect the wood from moisture and heat changes that can cause shrinking, swelling, crazing, and cracking. Finishes seal the wood pores against dirt and grime, too.

But over the years, wooden furniture dries out and shrinks or expands or warps from too much moisture. Older antiques sat in rooms heated only by a fireplace. If they sat too close to the fire, they dried out—too far away from it, they tended to warp.

In order for a finish to protect the wood, you have to protect the finish. This can be done by cleaning and polishing the finish with a wax.

Cleaning furniture is a simple process. Using a solution of Murphy’s Oil Soap or the spray version of it, apply some to a well-wrung-out old washcloth. Rub a small area of the piece at a time and immediately dry it with either paper towels or an old towel. If the piece is particularly grimy, you may have to wash it several times. Be sure not to get the wood too wet and dry each area immediately. After you finish cleaning, let the piece dry thoroughly for 24 hours. For a really bad piece, you can also use one of those green scrubby squares. But don’t rub too hard because you may rub off the finish.

Once your piece is dry, it’s time to apply a new protective coating. The preferred method of protection is a wax since they’re easy to apply and leave a brilliant shine. The best waxes to use are those in paste form. Stay away from Pledge or other so-called spray cleaners and waxes. They apply a film to the surface of furniture which attracts dust like a magnet. Instead, look for products that contain Carnuba wax, a natural substance from a palm tree native to Brazil that’s durable and produces a glossy shine when rubbed vigorously.

Another reliable polish is beeswax, which has been around for many years. A variety of paste and liquid polishes containing beeswax are available.

Paste Wax, made from petroleum products, is a third alternative. It produces a durable hard shine that lasts up to a year. The more coats you apply, the more waterproof the surface becomes.

Applying wax to a piece of furniture is a multi-step process. Apply either type of wax with an old athletic sock. Rub it in thoroughly and wait at least 30 minutes before buffing it with #0000 steel wool. Don’t worry, this grade is as soft as fabric. Wait 24 hours and apply a second coat. But this time, buff it with an old towel.

Regardless of which cleaner/polisher you choose, always use the same type on a particular piece of furniture. Finish surfaces that are accustomed to one type of cleaner/polisher won't accept another type.

How often you need to clean and polish your antiques will depend on a number of variables, such as the type of heating and cooling system in your home, the geographical location, how you use your antiques, and the type of cleaner/polisher you're using.

Generally, you’ll need to apply a paste wax every month or so. To tell if your piece needs another layer of paste wax, buff the old finish with a soft cloth. If this polishing fails to restore shine and smoothness to the finish, it's time for a new coat of wax.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "In the Good Ole Summertime" in the 2024 Summer Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Collecting Antique Furniture for Beginners

 

QUESTION: I really admire the workmanship and beauty of antique furniture, but I live on a budget, so collecting it seems to be out of my reach. How can I start purchasing antique furniture to begin my collection?

ANSWER: Even though you’re on a budget, it’s still possible to buy some antiques. The place not to start is in antiques stores and shows. Instead, search out consignment and thrift shops for pieces from the late 19th to early 20th century. And since the legal definition of an antique is an object that is at least 100 years old, that means that furniture dating to the early 1920s falls within the antique realm.

Another place to search for pieces is in used furniture stores. While there are fewer of them today, it’s still possible to find one or two. Look for pieces that can be used or repurposed to fit into today’s lifestyle without changing them significantly.

If you’re a beginning collector interested in antique furniture, the old saying holds true: "Buy what you like and can live with, buy the very best you can afford, buy from reputable dealers with experience, and if you do all these things your investment will continue to appreciate."

Antique furniture covers a wide range of types, designs, historical periods and styles—American, English, Continental (German and French) and Asian. All have their following, and within each of these classifications are sub-classifications indicating both style and historical period. Practically, antique furniture can be considered as English, European, American, and Chinese.

Wood type-mahogany, walnut, oak and pin predominate—significantly affects value in antique furniture. The type of furniture, practicality, hardware and construction details are also important in determining value as is the originality of all the composite parts. Many pieces of antique furniture have replacement panels or have had hardware added due to breakage. This lowers the value of a piece considerably. Also, many owners of antique furniture use lemon oil under the misguided belief that it helps preserve the wood and therefore enhances its value. This can’t be farther from the truth. All lemon oil does is dry out the wood, darken the patina, and decrease a piece’s value. The only polish that should be used is pure beeswax. Before purchasing a piece of antique furniture, rub it to see if an oily film is left on your hand.

Begin by purchasing small pieces, gradually building up to larger more expensive—and thus more valuable—pieces as you expand your collection and your budget. While antique furniture made before 1830 should be purchased with its original patina. However, it’s acceptable to buy Victorian and later pieces with their finishes cleaned or restored. Some furniture styles, like Biedermeier from Austria, actually increase in value once they are restored.

But most antique furniture collectors don’t buy for investment potential alone. Most pieces can still be used, so buying a piece of furniture that will not only fit into your decor but will have some use adds to its enjoyment. And while a few collectors purchase furniture from a particular period, most mix styles and periods based on their personal interest. To help varied pieces fit better together in the same room, you should try to use similar wood tones.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "In the Good Ole Summertime" in the 2024 Summer Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Give Antique Boxes Renewed Life Through Restoration

 

QUESTION: I have collected antiques for years. I got my start with a writing box I bought in England. But the box needed some tender loving care, so I decided to try restoring it. The most noticeable problem were a couple of missing corner angles on the lid. Do you think the angles were made of brass?  The depth of the voids is about 3 mm. The box, itself, is showing signs of wear. What would you suggest I do to restore it?

ANSWER: Whether or not to refinish an antique box depends on several things, including its condition, value, and what you plan to do with it. Unlike antique furniture, especially pieces made before 1830, antique boxes often require some restoration which actually adds to their value.

The corners on your box would have been brass, so if you can find someone to make these for you, they should be easy to replace. Be sure to glue them with a strong glue. Box makers usually used brass on the corners of better boxes to protect them while traveling. Victorians took writing and other types of boxes along on long trips so that they could communicate to their friends and family back home. It’s not unusual to find boxes from this time period in poor condition. Restoring them isn’t as difficult as doing furniture but can be challenging.

Antique boxes acted as portable storage workhorses for past generations. They served a variety of purposes from document boxes in which to keep valuable papers to writing boxes for correspondence to dressing boxes for grooming while traveling to tea caddies for storing precious tea. Victorians, in particular, loved boxes, and people from all classes used them.

Unfortunately, people handled boxes a lot, so most antique ones aren’t in the greatest shape. Some boxes may have sat on a table in front of a window in the sunlight and became faded over time while others suffered from neglect.

A good example is an Indian sadeli mosaic-covered writing box that outlived its usefulness. Someone decided that instead of tossing it out, they would give it to their children to play with. The children drew all over the beautiful mosaic with crayons and someone did a bad job of pasting a piece of chartreuse felt over the writing surface on the inside. Needless to say, this restoration wasn’t a walk in the park.

Unlike antique furniture made before 1830, many antique boxes will benefit greatly with even modest restoration. And since they’re not large, it doesn’t take a lot of materials or time to restore them.

A 1920’s Cave a Liqueur, a portable liqueur cabinet, was empty and in poor condition when purchased.. In this case, the box needed basic refinishing, but there was nothing inside. Sometimes, it’s necessary to be on the lookout for pieces that will help bring a box back to its almost new state—in this case a crystal liqueur set. Writing boxes usually need replacement inkwells, pens, etc. While it’s possible to find new replacements, it’s more fun to look for antique pieces to fill a particular box.

While restoration usually begins with reviving the wood of the box’s body, it also takes in exterior decorations made of ivory, tortoiseshell, and mother-of-pearl. These materials are all fragile and should be checked for cracks, abrasions, and chips. Metal ornamentation may be missing, dented or creased, or it may just need polishing. Veneers and inlay are much more difficult to repair and may require professional assistance.

Antique boxes also contain small and sometimes specialized hinges and locks that must also be examined for repair, restoration, or replacement. Finding replacements can be a real challenge since many of these may have been made for a particular box.

But minor conservation can do wonders for an antique box. First, tighten any loose screws and gently tap in any loose nails. Repair loose joints with wood glue. Finally, clean the box with a soft lint-free cloth dampened with Murphy’s Oil Soap solution. Do a small area at a time and use another lint-free cloth to dry it. After letting the box dry thoroughly for 24 hours, give it two coats of Minwax paste wax to protect the exterior. Follow the directions on the can.

Dust the interior of the box with a soft shaving brush. If the wood is bare, as with some inner areas of the box, switch to a solvent-based cleaner. Use a toothbrush or toothpick to clean out any crevices. If this has markedly improved the box’s appearance, then it may be a good time to stop.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "In the Good Ole Summertime" in the 2024 Summer Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Keeping Food Fresh

 

QUESTION: When I was a youngster, my family had an ice box in the kitchen. I remember when we first got it. My grandmother was in awe and my mother was overjoyed, for she could now keep food fresh for up to a week. Before that, she had to go to the grocers just about every day. Recently, I saw a beautifully restored old ice box at an antique show. Can you tell me who invented this food cold storage unit and when it first appeared in homes?

ANSWER: Before the mid 19th century, people depended on holes in the ground and spring houses to keep food cold. For the most part, people smoked meats and fish to keep them longer.

The traditional ice box dates back to the days of ice harvesting, which peaked between the 1850s and the 1930s, when manufacturers introduced the gas-powered refrigerator into American homes. However, the ice box became such a part of American culture that older people often refer to their refrigerators as ice boxes. But the real story of the ice box began in 1802.

Back then, an American farmer and cabinetmaker, Thomas Moore, needed to figure out a way to get his butter to market in solid chunks rather than a melted mass. He experimented with various methods until he came up with an ingenious solution—the ice box. His first design consisted of an oval cedar tub with a tin container fitted inside with ice between them, all wrapped in rabbit fur to insulate the device. Later versions included hollow walls that were lined with tin or zinc and packed with various insulating materials such as cork, sawdust, straw or seaweed. He placed a large block of ice in a tray near the top, so cold air could circulate down and around the tin storage compartment. Moore used his device to transport butter from his home to the Georgetown markets, allowing him to sell firm, brick butter instead of soft, melted tubs like his fellow vendors.

By 1830, Moore refined his design by making a wooden cabinet, similar to a large dresser, of hardwoods such as oak or walnut. As with his earlier versions, he lined the cabinet with zinc or tin, packed with insulating materials such as straw, flax, sawdust, cork, mineral wool, or charcoal. He tried each material to see which worked best, eventually settling on zinc.

Moore added several storage compartments inside the cabinet, with doors to each, including the ice compartment. He placed a drainage hole in it so that melted water, collected in a tray, could be emptied daily. Other ice box makers added spigots for draining the ice water.

The user had to replenish the melted ice, normally by obtaining new ice from an iceman, who delivered it by horse and wagon. The design of the ice box allowed perishable foods to be stored longer than before and without the need for lengthy preservation processes such as canning, drying, or smoking. Refrigerating perishables also had the added benefit of not altering the taste of what was preserved.

Until the late 1820s, cabinetmakers made ice boxes to order. But by the 1840s, various companies appeared including Sears & Roebuck, The Baldwin Refrigerator Company, and the Ranney Refrigerator Company began to mass produce ice boxes. Historians consider D. Eddy & Son of Boston to be the first company to produce ice boxes in large quantities. During this time, many Americans desired big ice boxes. Such companies like the Boston Scientific Refrigerator Company, introduced ice boxes which could hold up to 50 lbs of ice. A survey of New York City residents in 1907 found that 81 percent of the families surveyed owned some form of ice box.

Depending on the condition, an antique wooden ice box can be worth a lot of money. Many restored ice boxes now sell for as much as $2,000 to $3,000. It’s even possible to buy a restored antique wooden ice box that has been converted into a refrigerator or wine cooler with modern refrigeration equipment.

The usability of an antique ice box determines its actual market value The ice box’s age, size, condition, material, authenticity and provenance all contribute to its value.

Even a properly restored or professionally refinished ice box can be a good buy. While a restored or refinished model can sell for as little as $2,000, extremely rare ice boxes in good condition can cost as much as $10,000.

With those prices, it’s a good idea to make sure an ice box is worth it. Early ice boxes didn’t feature top-quality structure, so quality will vary. It’s important to check the wooden surface closely to detect signs of deterioration, such as visible cracks, chips, scratches, and warps. All of these add to the originality of the ice box. Reproductions are common, and many get sold as antiques.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "In the Good Ole Summertime" in the 2024 Summer Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.