Maintaining Antique Furniture

 

QUESTION: I recently inherited a number of pieces of antique furniture from my grandmother. They range from just under 100 years old to around 200. She loved nice things and was always on the lookout for interesting pieces. Unfortunately, as she got older, she was unable to care for them as well as she had in the past. I’m new to antiques and have no idea what to do to care for these pieces. Can you help me?

ANSWER: You’re very lucky that she thought that much of you to leave you her prized pieces. Over time, antique furniture accumulates dirt and grime. Even if she dusted it often, doing so grinds the dirt in, believe it or not. So the first thing you need to do is clean your pieces.

Cleaning is a simple process but you must be careful not to hurt the finishes. One of the best products to use to clean antique furniture is Murphy’s Oil Soap which comes in a concentrated liquid and also in a spray bottle. The best material to use for cleaning is an old washcloth with a bit of nap left on it. If you’re using the concentrate, mix with water following the directions on the bottle. Dip the washcloth in the mixture and get it nice and soaked, then wring it out as much as you can. If you’re using the spray, apply some onto a wet, wrung out washcloth. Clean a small section of a piece at a time, drying immediately with an old towel. You’ll have to rinse the washcloth often as it will pick up a lot of dirt. When you’ve washed the entire piece, let it dry for at least 24 hours. You’ll notice that your pieces are beginning to look a lot better already.

But cleaning is only the beginning. After a piece is thoroughly dry, you’ll need to apply a protective coating. 

The most common finishes found on antique furniture are waxes, oils, shellacs, and varnishes. Not only do these finishes bring out the beauty of the wood's grain and color, but they also protect the wood from moisture and heat changes that can cause shrinking, swelling, crazing, and cracking. Finishes seal the wood pores against dirt and grime, too.

But in order for a finish to protect the wood, the finish itself must be protected. This can be done by polishing the finish with either a wax or an oil.

You can find waxes in liquid, aerosol spray, and paste forms in hardware and home supply stores. Look for products that contain carnauba wax, a natural substance from a palm tree native to Brazil, that’s especially durable and produces a glossy shine when rubbed vigorously. Minwax is one of the best on the market. 

Another reliable and popular polish is beeswax, which has been available for many years. You’ll find a variety of paste and liquid polishes containing beeswax in hardware and home supply stores. 

Apply either type of wax with an old athletic sock. Rub it in thoroughly and wait at least 30 minutes before buffing it with #0000 steel wool. Don’t worry, this grade is as soft as fabric. Wait 24 hours and apply a second coat. But this time, buff it with an old towel.

Oils such as tung, linseed, and lemon oil have been used for centuries to preserve and polish furniture finishes. They're often mixed with absorption promoters, so they actually sink into the wood pores rather than remaining on top as waxes do. Oils leave a lustrous shine that’s softer than a glossy wax shine, and they provide good protection against moisture. However, they tend to darken the wood slightly over time. And as with applying wax, use a piece of old athletic sock to apply the oil. Since you'll need to give your furniture a second coat of oil in most cases, place the cloth you used in a plastic bag and then in the freezer. When you're ready to apply an additional coat, take it out 30 minutes before you plan to begin so that it can thaw.

Regardless of whether you choose to use a wax or oil, always use the same type that has been used previously on a piece of furniture. Finish surfaces that are accustomed to one type of polish won't accept another type. For example, an oil applied to a finish that had been previously waxed will remain on the wood surface and won't soak in.

If you don't know what type of polisher has been used on a piece—apply a small amount of an wax or oil to an inconspicuous spot on the piece. The wood should accept one of them and that is the one you should use.

How often you need to clean and polish your antique furniture will depend on the kind of heating and cooling system in your home, its geographical location, how you use your antique pieces, and the type of cleaner/polisher you're using.

Avoid using spray oils or dusting helpers like Pledge on your antique furniture. The oil in them will only build up on the piece, attracting more dust and grime. Generally, you’ll need to reapply a wax or oil every six months or at least once a year. A light dusting in between applications will keep your pieces looking good.

Besides regular dusting and waxing or oiling, you also need to provide the proper environment, paying close attention to heat, humidity, and light. 

It’s important not to keep your rooms too warm. Extreme fluctuations can harm antique furniture, loosening joints and veneers. During the colder months, depending on your geographical location, keep pieces away from radiators, warm air vents, and fireplaces. Too much heat can rob the wood of vital moisture.

Keeping a relative humidity level at around 55 percent at 65 degrees F. is also important. Purchase one or more inexpensive digital barometers and place them in rooms with your antique furniture. 

Lastly, avoid placing antique furniture, especially older more valuable pieces in direct sunlight or artificial light, especially with today’s LED lightbulbs. Over-exposure to either is harmful.  

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "folk art" in the 2023 Winter Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

The Plastic That Shaped the Future

 

QUESTION: Recently I purchased a box of assorted costume jewelry at a flea market. What intrigued me was the variety of colorful plastic bracelets in the assortment. While these look like they’re made of regular plastic we know today, the dealer told me they were Bakelite. My grandfather once told me that Bakelite was the first plastic. He had an old radio that seemed to have a plastic case. At the time, I didn’t believe it because I thought plastic was a mid-20th century invention. What can you tell me about Bakelite? Who invented it and when?

ANSWER: Without knowing it, you’ve discovered a treasure of the early 20th century. Bakelite was a chemical miracle of the 20th century. It enabled manufacturers to make a variety of items—children’s toys, kitchenware, pipe stems, wall switches, appliance and cutlery handles, colorful radio cases, and yes, jewelry. Dubbed the “Material of a Thousand Uses” by the Bakelite Corporation, Bakelite was versatile and nonflammable.

Leo Baekeland developed this innovative form of plastic in his backyard laboratory in Yonkers, New York, between 1907 and 1909. He attempted to create a synthetic shellac when he discovered that phenol, or carbolic acid, and formaldehyde, when combined under certain conditions, resulted in a molasses-colored resin with unique and exceptional properties.

Once cured, the phenol formaldehyde resin could be ground into powder and mixed with a variety of fillers to create a molding compound that was practically indestructible. Slate dust, asbestos, wood flour and ground walnut shells were all used for this purpose, but because of their dark color, molded Bakelite was limited to shades of black, maroon and brown.

In1911, he founded the General Bakelite Company in Perth Amboy, New Jersey, which produced up to 200,000 tons of the plastic each year. Because it was resistant to heat, moisture, and chemicals, it became a component of the electrical industry. It also had excellent insulating properties, making it perfect for use in electrical insulators, switches, plugs and sockets. 

Making Bakelite was a multi-stage process. It began with the heating of phenol and formaldehyde in the presence of a catalyst such as hydrochloric acid, zinc chloride, or the base ammonia. This created a liquid condensation product, referred to as Bakelite A, which was soluble in alcohol, acetone, or additional phenol. Heated further, the product became partially soluble and could still be softened by heat. Sustained heating resulted in an "insoluble hard gum." 

However, the high temperatures required to create this tended to cause violent foaming of the mixture when performed at standard atmospheric pressure, which resulted in the cooled material being porous and breakable. Baekeland's innovative step was to put his "last condensation product" into an egg-shaped "Bakelizer." By heating it under pressure at around 300° F, he was able to suppress the foaming. The resulting substance was extremely hard and both infusible and insoluble. The range of colors available included black, brown, red, yellow, green, gray, blue, and blends of two or more of these. 

Bakelite came in various forms to suit varying needs, including clear material, for jewelry and smokers' articles, cement, used in sealing electric light bulbs in metal bases, varnishes, for impregnating electric coils, lacquers, for protecting the surface of hardware, and enamels, for giving resistive coating to industrial equipment. In addition, there was laminated Bakelite, used for silent gears and insulation; and molding material, used to form items of utility and beauty.

When Bakelite’s patent on phenol formaldehyde expired in 1927, other companies using the chemical came on the scene, including the American Catalin Corporation which pioneered a purified form of phenolic resin that did away with the dense fillers used in molded Bakelite. The company introduced casting resins in 20 different colors.

The Bakelite Corporation quickly developed its own phenolic resin, producing it in thousands of colors. In reality its recipes were exactly the same as American Catalin, except they experimented more with dye saturation and mixing colorants with clear resin to create mottled and swirled effects.

By the mid 1930s, several competitors had begun producing phenolics which forced the price of both Bakelite and Catalin down. One of these other companies, Fiberloid, introduced Opalon in lapis lazuli, mottled red, alabaster, onyx and mottled walnut, fabricated into board game pieces, jewelry, and umbrella and knife handles.

The introduction of electrical power gave rise to a wide range of labor-saving devices that utilized Bakelite and Catalin in one way or another. The modern appearance, durability and hygienic qualities of plastic made it superior to traditional substances.

Bakelite quickly replaced wood and metal in telephones, clock and barometer cases, as well as knobs and handles on small appliances like electric irons, toasters and cookware. Colorful Catalin cutlery handles and novelty napkin rings dressed up the table and brightened the kitchen.

In 1933 the Bakelite Corporation began to produce wood-tone radio cabinets of compression-molded phenolic resin. Thermosetting plastics resisted the heat generated by radio tubes, making Catalin ideal for radio cabinets. It wasn't long before colorful, modernistic Catalin radios began to make their appearance.

By 1936, various companies made two-thirds of all costume jewelry produced in the U.S. by fabricated molding and fabricating cast phenolic resin. The fabricating process, however, was labor-intensive and lengthy.

First, molds had to be made by dipping a steel master into molten lead. Once workers  assembled enough molds, others prepared phenolic resin and carefully poured it into each mold by hand. A technician carefully combined resins as casting occurred if special swirled or mottled colors were desired, the technician needed to carefully combine resins as they were being cast.

Once filled, workers wheeled the molds into a huge oven to be baked  at176 degrees F. until the resin cured. Curing time varied. Dark red and blue cured in three to four days while whites took six to eight days. Once the cast resin cured, workers removed it from the lead molds using air hammers. This always resulted in damaged molds. Other workers tossed the broken pieces back into the vat of molten lead to be melted down for reuse.

To make jewelry components, workers cut shaped or hollow phenolic rods into individual pieces, much like slicing a loaf of bread. Then they carved and machined by hand them for added adornment. Once they completed the decorative carving, they finished the pieces by tumbling or buffing on a polishing wheel.

Bakelite became a symbol of progress and modernity as the streamlined Art Moderne style overtook the chic style of Art Deco. The sharp-stepped sides of skyscrapers softened into curves, while boxy trains and automobiles became sleek, with fluid lines that created the illusion of speed and motion.

By the late 1930s, plastic moldings reflected the streamline design trends. Shiny surfaces, modernistic curves, waterfall fronts and facades, made to look like car grills, all found their way into jewelry, small home appliances and decorative household objects.

Perfectly suited to Bakelite and Catalin molds, the Art Moderne style enabled the resin to easily flow inside a curved mold. In addition, it was easier to mold, fabricate, and polish the resulting casts than the boxy, stepped sides and sharp corners of Art Deco designs.

Cast phenolic resins weren’t as durable as compression molded phenolic compounds because they shrank over time, often resulting in cracks. Catalin averaged a 4 percent shrinkage in the first 10 years. Cracks developed in radio cases because the parts were bolted to the housing, leading to stress as the plastic shrank.

Though companies produced Catalin in 20 opaque and translucent colors, engineers limited the color range because they felt all other dyes would cause instability in the plastic.

Unfortunately, Catalin reacted to ultraviolet light by converting to phenyl alcohol, which was brownish in color. That was why so many Catalin items are amber colored. The effect turned original white to butterscotch, bright blue into drab olive, green into butterscotch, and brilliant red marble into brown.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "folk art" in the 2023 Winter Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

A Juicy Solution

QUESTION: I was visiting my grandmother the other day and noticed that when she needed some lemon juice for a dish she was preparing, she pulled out a funny looking contraption, placed half a lemon on it, and pushed down on the lemon while turning it slowly. The juice from the lemon flowed into a grove at the bottom. She then poured the juice into her pan and continued cooking. What is this device called and did everyone use them back in the day?

ANSWER: Younger Americans think lemon juice comes from those cute plastic lemons---or from fancy and expensive electric stainless steel appliances that sit on their kitchen counter. Many have never had to squeeze juice by hand, but it wasn't so very long ago when that's exactly what everyone had to do in order to have the lemon juice for a dish or a refreshing glass of OJ. But instead of an electric appliance, people used a reamer.

The French made the earliest reamer, registered in 1767, of nickel silver and porcelain. First produced in Europe, reamers later appeared in the U.S. European reamers were  some of the finest ever created, including those produced by the finest china companies, such as Limoges, Royal Bayreuth, R.S. Prussia, and Meissen.

Though Charles L. Tiffany offered a reamer at his Tiffany and Company store in New York in the early 1880s, the first juice extractor patented in the U.S. was on May 30,1865. This was actually a wooden juice press.

The hand-held lemon squeezer created by George Cornford patented the first hand-held, clear glass lemon squeezer on August 19,1884, and it resembled a darning egg. 

Before the turn of the 20th century, more inventors patented designs for their own juice squeezers. R.E. Bristow of Rockford, IIlinios, registered "The Ideal" on January 31, 1888. John Easley of Manhattan registered a hand-cranked reamer on July 10, 1888, which was the first of his many patents until 1900. In fact, reamer designers of the early to mid 1880s created intricate mechanical designs culminating in the creation of a model that first cut the fruit in half and then extracted the juice.

But these were too sophisticated for the average user. By the late 1880s and early 1890s, designs reverted back to single-piece glass reamers. The registered patent designs of Thomas Curley, whose design was called, what else, the "Curley." Easley came out with a three-piece model, and the Holmes Company gave the world the “Holmes,” which was made of glass. Still the design that finally remained for years to come was Arthur Bennet’s “Lemon Squeezer,” patented on February 16, 1909.

This one brings to mind the classic juice reamer. Made of one piece of glass, the "Lemon Squeezer" had a pointed, grooved center for twisting the fruit on to remove its juice. The juice ran into the shallow dish below the reamer part. The "Lemon Squeezer" also had a handle to 'hold for pouring and a spout.

The first reamers or juicers were for extracting lemon juice for cooking or for flavoring, not necessarily for juicing oranges for making orange juice. Though oranges are available year round now, in 1900 they were exotic and expensive.

But that changed in 1907 when Sunkist, established as the trademark for the California Fruit Grower's oranges, appeared on the market. By 1916, Sunkist began offering glass reamers as a way to promote their oranges. But orange juicers and lemon juicers weren’t the same. Lemon juicers didn’t need a "bowl" or area on the juicer to hold a large amount of juice, but the orange reamers did, which brought about a major change in the style of reamers.

Sunkist was the leader in design changes. Besides offering reamers with "juice receptacles," many of the Sunkist reamers also had embossed lettering, spelling out "Sunkist Oranges and Lemons" or "Sunkist-California Fruit Grower's Exchange.” Sunkist vigorously promoted them through department and variety stores, grocery outlets and by mail-order. Sunkist continued to offer reamers, many made by the McKee Glass Company, until 1961.

By the 1920s and 1930s, reamers became more colorful with the introduction of Depression Glass. In 1922, the Fly Glass Company introduced Pearl Glass, and by 1925 reamers could be purchased in a variety of colors, from Vaseline glass to amber, pink, and emerald green glass. The Great Depression produced more glass reamers  than ever before or after.

There were other produced in the 1930s, including the 'Servitor," the "Handy Andy," and the "Jiffy Juicer."  Though china reamers had been produced in Europe years before, it wasn’t until 1927 when Goebel registered their German ceramics and chinaware in the U.S. Though Goebel didn't begin making ceramic juicers in the U.S. until the late 1920s, ceramic reamers had been produced in America from 1910 and continued through 1938. In fact, by the end of the 1930s, the production of colored glass reamers had declined. 

The end of the reamer era occurred in 1939 as frozen orange juice hit grocer’s freezers.  Today, glass and ceramic reamers are the most popular with collectors.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "folk art" in the 2023 Winter Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

 

The Classic Windsor Chair

 

QUESTION: We’ve had a Windsor chair in our family as far back as I can remember. I believe it belonged to my great-great grandmother. Today, I use it as a chair at my computer desk. What can you tell me about this chair?

ANSWER: You have a standard bow-back Windsor chair, the kind found in just about every upper class household in Colonial America. While most people consider them delicate antiques, they’re quite sturdy and have many uses. 

One of the most graceful and usable of all traditional chairs, the Windsor is also the most successful piece of furniture in American history. Its origins, however, are English, dating back to the turned and joined stools of 16th-Century England. The name probably derives from Windsor, where a prolific chairmaker  produced and sold the chairs in the 18th Century. He sent them down the Thames River to London where people referred to them as coming "up from Windsor."

Wheelwrights rather than cabinetmakers made Windsor chairs in England. They remained farmhouse or tavern furniture for a long time. But here in America, homeowners embraced the Windsor as a sort of all-around chair. They could be stored in a hallway and brought into any room that needed more seating when guests arrived. They could be easily carried. And they could be brought outdoors to provide seating on the lawn on hot summer days. Even the most prominent members of Colonial communities used them. George Washington seated his guests on the East portico of Mount Vernon in 30 Windsor chairs.

As a piece of furniture, the Windsor holds historical significance. Thomas Jefferson sat in a bow-back. writing-arm Windsor while composing the first draft of the Declaration of Independence in late June of 1776. And when Benjamin Franklin and other members of the Continental Congress voted to secede from the mother country on , July 1, 1776 in Independence Hall, they sat in bow-back Windsors.

There are eight different kinds of American Windsors, including the low-back, or Philadelphia Windsor, named for the city where a craftsman constructed the first Windsor in the colonies, the comb-back, fan-back, bow-back, loop-back, arch-back or New England armchair, rod-back, and arrow-back. Each had its distinct use. Windsor makers socketed all parts together except for the shaped arms of the fan-back, arrow-back, and rod-back chairs. On these, they doweled the inner ends of the arms or screwed them to the back uprights.

Windsor makers preferred pine, whitewood, and basswood for seats, hickory or ash for spindles, maple. yellow birch, or beech for turned legs. stretchers, and supports, and hickory, oak, ash, or beech for hoops. bows, or combs. And because of this, makers gave their Windsors several coats of dark green paint. In the 19th century, small factory workshops produced Windsors of pine and maple. And even to this day, craftsmen still use the same time-tested techniques for constructing reproduction Windsors. 

Most people are familiar with the low-back, barrel-shaped chairs used from the mid 19th to the early 20th century. These were actually descendants of the earliest low-back Windsor chairs made in America. However, these don’t usually appear in historical house museums from the Colonial period. Made from 1725 to1760, this Philadelphia style chair had blunt-arrow legs—turned legs with a cylindrical lower section and ball.

The comb back was the second type of Windsor chair made in the Colonies. The crest rail with its spindles resembled a wide-toothed comb, hence the name. In both England and America, the Windsor became known as the stick chair. The wide saddle seat is half round with a straight front. The deeply curved one-piece arm terminates in knuckled-curved ends and is supported at front by baluster-turned uprights. The back is formed of nine bulbous spindles that pass through the arms and extend upward into a wide comb with volute ends.

Fan-backs had tall spindles flanked by stiles and came in both armchair and side chair styles. 

Legend says that an archer’s bow influenced the design of the bow back Windsor. Realistically, it probably evolved from the comb back. Also known as the hoop-back or sack-back, this Windsor was the most commonly used in America and England from 1740 to 1800 because of its elliptical seat and seven tapered spindles that pierce a semi-circular arm rail and bowed top rail. 

During the 19th century, the Windsor chair had become more decorative, including those with arrow-shaped splats and paint-decorated 

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about old-time winter objects in the 2022/2023 Winter Holiday Edition, with the theme "Winter Memories," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

A Spoonful of Love

 

QUESTION: There are many ways of saying “I love you,” but one of the most unusual is the love spoon. I recently saw several of these in antique shops while traveling through Wales. About all the dealers could tell me about them was that they were gifts of love from a suitor to his true love, a tradition that has existed in Wales for several centuries. I bought one to take home, even though it seemed to be overly priced. What can you tell me about Welsh love spoons?  

ANSWER: Rural lovers with their hearts set on a plain milkmaid would probably have been unable to buy a loving gift for Valentine’s Day back in the in the late 18th and 19th centuries. So they fashioned tokens of their love from whatever was close at hand, using whatever skills they had. Often these gifts might have been small personal items, such as knitting sheathes, stay busks and lace bobbins. But the gift that seemed to have stirred young girls’ hearts the most was the Welsh love spoon.

No one knows why the Welsh made these love spoons. However, there was an earlier tradition among Scandinavians of giving love spoons. However, today most people associate the love spoon with the Welsh.

So why give a spoon? For centuries the humble spoon was one of the most familiar of  household utensils. The practice of storing spoons fitting snugly together prompted people to give a romantic meaning to the word in the 18th century. The delightfully descriptive word “spoonways” eventually embraced the human desire to emulate the closeness of these spoons in bed. The Victorians went further and used the verb “to spoon” to describe courting. In fact, the phrase continued in use well into the 20th century with popular song writers who found it a useful for its ability to rhyme with words such words as moon, June, swoon, and honeymoon.

It’s difficult to be precise about the origins of love spoons. However, enough of them inscribed with a date survive to enable collectors to trace their styles. One of the earliest recorded dates to 1667.

Most of the spoons on the market today date from the late 18th and 19th centuries. Although generations of spoon carvers would have copied styles and designs, dating them is difficult. Those spoons with a broad, flat  pierced handle seem to come predominantly from North Wales, while those that display clumsy carving and a lack of proportion tend to come from Pembrokeshire. The lucky young girl who received one really didn’t care where it came from. 

What’s certain is that such prized possessions would have been displayed in a place of honor and no doubt the most eligible girls could acquire a small collection of these spoons before choosing their mates. The. infinite variety of styles and designs found in Welsh love spoons means that there are no two alike. Their great charm rests in what  they represent and the symbolism in the motifs that carvers used to create them.

The most common of these motifs was naturally the heart. Two hearts intertwined contained even more obvious meaning. Closely associated with the heart, and almost as common, was a motif that looked like a fat comma. This symbol comes from the ancient Egyptians sign for the soul. Thus, hearts and commas declare heart and soul. Keyholes represent another powerful motif, offering a way into the suitor's heart. And even other spoons feature a small muse, and occasionally a key that really helped make the suitor’s feelings known. 

Still, the formalities had to be observed and many love spoons incorporate chains—not simply to demonstrate the skill of the carver—but to indicate the chains that bind a marriage. Shoes and boots also appear frequently on love spoons. The origin of this motif is a reference in the Bible in which the exchange of a shoe signified agreement of a marriage contract.

Carvers often incorporated initials with or without dates, and sometimes created spoons with a deeper, oblong window cutout into which a suitor inserted a piece of paper inscribed with names, dates, or drawings. Likewise, carvers sometimes added shards of broken mirrors. Why they did this is unclear. Perhaps it was to add a note of brightness to their spoon design, for none of these shards was large enough to serve as a looking glass. 

And while they used the most accessible and workable materials to carve their spoons, carvers used a variety of woods, especially easily carved sycamore and fruitwood. 

Occasionally, they created spoons from more exotic woods and materials, such as mahogany, ivory, or whalebone. This suggests that a sailor could have carved the spoon while on a voyage to a distant land. Sailors also seemed more likely to have embellished their spoons with inlaid colored wax or tiny brass pins. Some went even further and incorporated a lantern or cage containing free-moving balls into the handles, showing off the skill of the carver. 

The skill of some of these spoon makers was extraordinary, with the manual dexterity to produce even the most basic spoons. It’s also possible that an especially talented spoon carver could have made spoons for others in his area, accounting for the similarity of designs in spoons from certain places.

Because love spoons now fetch higher prices both in the United Kingdom, the United States and Canada, it would be easy to give them an importance beyond their humble origins. Essentially, love spoons were simply a declaration of love, pure and simple.  

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about old-time winter objects in the 2022/2023 Winter Holiday Edition, with the theme "Winter Memories," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.