Dreaming of a Brite Christmas

 

QUESTION: For several years I’ve been searching for older ornaments for my Christmas tree. I’ve seen a good number at flea markets and antique cooperatives. Many of these are still in their original boxes marked “Shiny Brite.” I’d like to know more about this company. When did they produce ornaments and what kind did they produce?

ANSWER: Today, the trend is to decorate Christmas trees with handcrafted ornaments, from simpler ones sold at church bazar to finely crafted ones of wood, silver, and gold sold at Christmas markets throughout the world. But some people prefer to decorate their trees with nostalgic glass ornaments from their childhood.

Ornaments that decorated yesterday’s trees continue to create holiday traditions. Shiny glass orbs hang from branches in bright, shiny colors, and sparkly patterns. Shiny Brite was a mid-20th-century brand created by German-American immigrant Max Eckardt.

Blown-glass Christmas ornaments with hand-painted accents got their start in the German village of Lauscha in the 1840s. Glassmakers blew molten glass into molds shaped like fruit and nuts, then silvered the inside with a special compound of silver nitrate and sugar water. 

As a native of a small village near Lauscha, Eckhardt knew the appeal of glass ornaments and also saw their potential in the American market. He had been importing hand-blown glass balls from his homeland since the early 20th century. He had the foresight to anticipate a disruption in his supply of glass from Germany from the upcoming World War II and in 1937, he established the Shiny Brite Company in New York.  The silver nitrate coating on the insides of his ornaments inspired him to name his company Shiny Brite.

To keep his company afloat, Eckhardt sought the help of New York’s Corning Glass Company, with the promise that F.W. Woolworth would place a large order if Corning could modify its glass ribbon machine, which made light bulbs, to produce ornaments. This machine, built in 1926, produced 2,000 light bulbs per minute. The transition was a success, and Woolworth’s ordered more than 235,000 ornaments. In December 1939,Eckhardt shipped the first machine-made batch to its 5-and-10-Cent Stores, where they sold for 2 to 10 cents each.

By 1940, Corning was producing 300,000 unadorned ornaments per day, sending the clear glass balls to outside artists, including those at Eckardt’s factories, to be hand decorated. After being lined with silver nitrate, the ornaments ran through a lacquer bath, received decoration from Eckardt’s employees and packaging in brown cardboard boxes. According to a LIFE magazine article from December 1940, Corning Glass Works expected to produce 40 million ornaments by the end of that year, supplying 100 percent of the domestic ornament market.

Originally, the ornaments were plain silver, but eventually Eckardt produced them in a large variety of colors: with classic red the most popular color in the 1940s, followed by green, gold, pink and blue, both in solids and stripes. The company also offered Shiny Brite ornaments in a variety of shapes besides balls, including tops, bells, icicles, teardrops, trees, finials, pine cones, and Japanese lanterns, and reflectors. Workers decorated some with mica “snow.”

Through the 1940s and 1950s, Shiny Brite ornaments became the most popular tree ornaments in the U.S. Eckhardt stressed that they were American-made as a selling point during World War II by featuring Uncle Sam shaking hands with Santa on the front of the original 1940's boxes.

Corning continued to crank out Shiny Brite ornaments, and by the 1950s, production reached a rate of 1,000 per minute; with machines also painting them at that time. The 1950s was the peak of Shiny Brite production and popularity, with Eckardt operating four New Jersey factories to keep pace with the demand.

Shiny Brite ornaments dangled from trees through the early 1960s, until plastic ornaments became more popular. But over the years, vintage Shiny Brites have remained popular with collectors for their beauty and nostalgia, and acting as a sort of time capsule of American holiday history. They are some of the most sought after vintage ornaments from the mid 20th century and are the perfect decoration for those Space-Age aluminum trees.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "The Age of Photography" in the 2023 Holiday Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Going Nuts for Nutcrackers

 

QUESTION: My family comes from a German background. When my ancestors first arrived in the United States back in the 1880s, they brought with them many of the customs and traditions. This included how we celebrated Christmas. My favorite job as a young boy was setting up the display of nutcrackers. I continued to do this until I left to go to college. But in all that time, no one ever explained to me how the tradition of nutcrackers at Christmas came to be. Could you please give me some history on them? 

ANSWER: Nutcrackers have been a part of Christmas ever since the first one appeared in human form in the 17th century. For Volker Fuchtner, making nutcrackers has been a family business ever since his great-great grandfather, Wilhelm Friedrich Fuchtner, created the classic wooden nutcracker in Germany's Erzgebirge region.

The Erzgebirge is a range of low, forested hills that form the border between the Czech Republic and the German state of Saxony. The town of Seiffen, which somehow managed to keep the woodworking tradition alive during the days of communist occupation, has more than 100 small family workshops, in which townspeople produce the nutcrackers. There are also huge replicas of the nutcrackers and other wooden figures all over town, and a visit to Seiffen at Christmas is special.

Mining used to be the main industry in the Erzgebirge—the name translates as "Ore Mountains"—but the silver, iron, tin and nickel eventually ran out. Woodworking then became a logical occupation for the people, since the region had abundant wood and rushing mountain streams to power their lathes and saws.

At first, woodcarvers made simple spindles, plates, staffs and common household articles, but they gradually turned to toys, notably cylindrical dolls produced with a lathe. Around 1870, some of the woodcarvers adapted these toys to become classic nutcrackers.

A classic nutcracker usually stands 14 to 18 inches tall and takes the form of a brightly painted king, soldier or some other stern authority figure with huge painted teeth, an upward curling moustache, and a nut-cracking mouth that reaches to his waist when open.

The fierce-looking nutcrackers served a purpose. Though Germans looked up to authority figures, they were also a bit resentful of them. The nutcrackers enabled the townspeople to make fun of them. The soldiers weren't limited to the original Ruritanian uniforms. They also sported spiked helmets or dressed as Russian hussars or British grenadiers. And there could be other fierce characters, including kings and robbers. The figures later appeared as more benevolent types from the German culture, such as night watchmen, chimney sweeps, gnomes, foresters, monks, and even Rumpelstilzchen.

The Grimm brothers, who collected the famous fairy tales, said in their dictionary, that a nutcracker was "often in the form of a misshapen little man, in whose mouth the nut, by means of a lever or screw, is cracked open.

There are about 120 steps in the making of a nutcracker, which explains why even new ones sell for $150 to $250. Woodworkers cut pieces of beech, maple, birch, linden and pine are cut into proper sized blocks, then leave them to season for up to two years in the open air under a roof. They do the first step in the manufacturing process on a lathe. Craftsmen turn the body and head as one cylindrical piece, with beveled shoulders and chiseled out areas for the nutcracker and lever. Others turn the arms and legs separately, fastening them to the body along with the stand.

After forming the body, a hand carver gives the figure a nose, a hat and whatever special features the particular character gets. Next come several layers of priming, after each of which the piece must thoroughly dry. Then a painter uses a fine brush to give the figure its eyes, moustache, teeth, decorative tunic, sword and other special features. Again, each coat of paint must dry before the painter applies another. Then comes the final assembly, in which another craftsmen adds the lever and glues on rabbit fur for hair, a beard, and sometimes even a moustache.

At least that’s how the nutcracker makers of the Erzgebirge do it. Each firm marks their genuine nutcracker with a stamp showing a stylized soldier on a hobbyhorse and the slogan ECHT ERZGEBIRGE HOLZKINST MIT HERZ or “Genuine Erzgebirge wooden art with heart.”

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "The Age of Photography" in the 2023 Holiday Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

The Clock is Ticking on Clock Collecting

 

QUESTION: I’ve been interested in clocks for a long time but only recently have I had enough extra cash to start a serious collection. How do I know what clocks to collect? I have a limited budget.

ANSWER: One of the quirky things about collecting clocks is that, depending on the size, they can not only take up space but also time–the time needed to keep them running. Clocks are precision instruments, even the smallest alarm clock has tiny working parts that need regular maintenance. 

However, not every old clock is worth collecting. In fact, collecting clocks can be a challenge because of the amount of space they take up. So people who do collect them are very particular. 

With antique clocks, condition is prime. To be worth anything, an antique clock needs to be in working order—in other words, it needs to tell time almost as good as it did when  first made.

From 1680 to 1840, tall case clocks was popular in America. Master clockmakers produced fewer than two dozen of these clocks a year. Eventually, these clocks became known as grandfather clocks. 

While these early clocks demonstrated the finest quality of workmanship, the cost of $50 or more excluded anyone but the very rich from owning one. Today, these same clocks can sell for four or five figures. While clockmakers produced the clockworks, coffin makers made the cases. Until about 1770, the brass dials had silver decoration. Painted dials and those coated with white enamel didn’t appear until 1790. Cheaper models had plain paper dials pasted on an iron or wooden background. While clockmakers produced the clockworks, coffin makers made the cases. Until about 1770, the brass dials had silver decoration. 

Next in the timeline of clockmaking came wall clocks. In 1802, Simon Willard patented his improved Timepiece," a wall clock shaped like a banjo. This style would be copied many times. Years later, the Waterbury Clock Co. manufactured a .umber of banjo clocks and used the name "Willard."

While the Willards introduced new lock styles, it was Gideon Roberts, a Revolutionary War veteran from Bristol, Connecticut., who began to make the clock more affordable. Roberts replaced he brass movements used to that point with less expensive wooden movements and also used painted paper dials. Imitating the German styling known as wag-on-the-wall, Roberts would also make clocks without a case. The exposed works could be encased for an additional fee. Using these methods, Roberts was able to produce 10 or more clocks at a time.

Clock manufacturers produced an infinite number of styles of mantel clocks from 1810 to 1860. These included papier-maché clocks, as well as pillar-and-scroll clocks with wooden movements.

Eli Terry been has generally credited with bringing mass-production to clockmaking in America. In 1797, Terry was granted the first American clock-related patent. In 1807, he signed a contract to make 4,000 clock movements within three years. Legend has it that Terry spent the first two years designing and constructing the machinery, which would allow him to fulfill his obligation. In 1810, with the help of apprentices Seth Thomas and Silas Hoadley, Terry's pillar-and-scroll shelf clock became the first inexpensive, factory-produced clock available to the American public. Thomas and Hoadley purchased Terry's factory that same year and worked together until 1813. Thomas eventually became one of America's best-known clockmakers.

The cuckoo clock dates back to 1730 when Swiss and Bavarian clockmakers developed the pendulum striking mechanism and the cuckoo concept. Unfortunately, cuckoo clocks never became popular with American manufacturers, but many American travelers purchased them in Germany and Switzerland, as did soldiers returning from World War I and II..

By 1850, technology would change most movements from weight to spring-driven, and brass coiled springs would be replaced by cheaper steel springs. Among the most popular clocks were the schoolhouse clock, the pressed oak "gingerbread" kitchen clock, the steeple clock, and the OG clock, which featured a double continuous S-shaped molding.

Novelty clocks have become another popular collectible category. There have been flower clocks, animated animal clocks, advertising clocks, and even dancing girl clocks. 

Researching an antique clock’s origins can be challenging. Those made in the 18th and at least the first half of the 19th century bore no labels. Some clockmakers did sign their works, especially those that made tall case clocks. Generally, they signed them somewhere on the dial. Many of those that did have labels in the latter part of the 1800s, lost them over time.  

The key to acquiring museum quality clocks is learning how to research, properly identify, and evaluate antique clocks. Rarity, provenance, originality, quality of manufacture, and quality of restoration all affect value.

An antique clock isn’t always as good as it appears. While a clock may look great from the outside, the condition of its works is what counts. Over time, abuse and bad repairs can add up, rendering what could have been a great find nearly worthless. 

The sad thing is that many antique clocks cannot be repaired. Even the best horologist can’t work miracles on many old clockworks. The reason is that most cannot obtain the parts needed to do the repairs. And the few younger clockmakers just don’t have the skills necessary to make the parts themselves. 

Because of the wide range of antique clocks available, many collectors choose to specialize, collecting one type of clock from different makers or a variety of clocks from the same maker, perhaps Seth Thomas. Another possibility is to collect a fine example of each type of clock. Some collectors assemble collections of clocks with different types of movements. 

But unlike a piece of antique furniture that has been restored, an antique clock that isn’t running isn’t worth collecting. 

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "The Age of Photography" in the 2023 Fall Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.