Copycat Camera

QUESTION: I found what I think is a unique 35mm camera this week. I believe it’s from the early 1950s. However, even though I’ve looked, I can’t seem to find too much information about it. It’s called a Leotax, but I’ve never heard of this brand before. What can you tell me about it?

ANSWER: The Leotax isn’t the most prevalent camera on the collectible market, mostly because not a whole lot of them were made. It’s main claim to fame is that it was the Japanese equivalent of the then popular Leica M3, a rangefinder camera with excellent optics and precision.

In January 1938, Nakagawa Kenzo founded a company called Kyoei-sha, based in Nippori, Tokyo. Nakagawa, a former engineer of Konishiroku, obtained financial support from Minagawa Shoten.

By the end of 1938, Kenzo had renamed his company G.K. Showa Kogaku. Its main product was the  Leotax, a Leica-style 35mm camera, initially made with an uncoupled rangefinder. However during its early years, the company manufactured mostly Semi Leotax folding cameras.

Kenzo had a special fondness for Leica cameras, so he set out to develop a Japanese counterpart. But he ran into problems because of the numerous patents Leica had registered for its products. The camera design that Kenzo finally settled on was a rangefinder—a camera in which the photographer views his or her subject through a separate viewfinder. While Leicas had two viewfinders, the Leotax had only one round one, positioned in the upper left hand corner on the back of the camera. Kenzo’s major challenge was finding a way to circumvent Leica’s coupled rangefinder mechanism—that is connecting the viewfinder to the lens.

The Leotax had an uncoupled rangefinder mechanism which had to be set manually on the lens by looking through the viewfinder and rotating a control dial on the top of the camera for the measured distance. While not such a good solution, it did work.  This was the original Leotax camera.

Following World War II, Kenzo changed the company name again to Showa Kogaku Seiki K.K.  In 1942 with the introduction of the Leotax Special A and Special B, the company adopted a coupled short base rangefinder with a scissor strut arrangement for the sensor arm, presumably to circumvent the Leica patents. This sensor arm arrangement necessitated moving the viewfinder of the original Leotax from just above the lens to a position at the extreme left of the top cover as viewed from the rear. These cameras emulated the Leica III with exposure times to 1 second.

Early Leotax Leica type cameras had nicely finished exteriors but crudely finished interiors. By the time the Leotax DIV appeared on the market, the firm had produced a good camera with an equally fine interior and exterior.

Renamed Leotax Camera K.K. in 1956 or 1957, the company continued to produce cameras until 1961. It made only 50 of the pre-World-War-II Leotax models. This particular one seems to be the Leotax DIV (D4), the sixth in a line of 18 models made by the firm from 1938 to 1961.

By 1947, Kenzo had substantially changed the Leotax as a result of the invalidation of all the Leica patents by the Allies. So beginning with the Leotax DIII (D3), all Leotax cameras featured a coupled rangefinder mechanism. In 1950, the firm changed its name again to Showa Optical Works Ltd. and in 1956, underwent its final name change to Leotax Camera Company, Ltd.

In 1961, the company filed for bankruptcy, mainly due to the large quantities of the Leica M3 that had finally come on the market. This Leica featured the far superior bayonet mounting system for its lenses, something which the Leotax didn’t have. And despite the lower price of the Leotax models, they just couldn’t compete with the excellence of the Leica M3.

The final straw came with the introduction of the single lens reflex camera (SLR), with its instant-return mirror, motorized film advance, and modular construction. From then on, the makers of interchangeable lens rangefinder cameras were relegated to oblivion.

The Leotax Camera Company became the second oldest Japanese camera manufacturer, the oldest being Canon.  Of the many small Japanese companies that tried to copy the Leica cameras, the Leotax was the most well-known. A relatively small firm, it produced no more than 50,000 cameras during its lifetime.

Today, most Leotax camera fetch decent prices.  A model of the Leotax DIV in average condition recently sold for $336.  In mint condition, this camera can fetch nearly $1,000.

Sweet, Sweet Santas

QUESTION: I found this old-world German Santa candy container in an antique shop a couple of months ago. He’s made of papier mach  and stands about 6 inches tall. He’s wearing a cone-shaped hat and carries a small Christmas tree. A faint stamp on the bottom says “Made in Germany.” This little Santa comes apart in the middle to reveal a lined interior. Can you tell me more about this little gem?

ANSWER: You have indeed discovered a little Christmas gem. What you have is a Santa candy container made in Germany around the turn-of-the-20th-century. Called a springhead, this little novelty features a Santa wearing a red-flocked coat and a cone-shaped hat. He also carries a small Christmas tree decorated with colored beads.

Of all the holiday decorations produced since the mid-19th century, few remain as cherished as early German Santa Claus candy containers. These handmade characterizations of Father Christmas remain a popular collectible. 

                              
The manufacture of Santa candy containers began in the 1880s. Makers sold them to an eager American market. By the end of the decade, U.S. retailers offered their customers German-made Santas in a variety of sizes and styles.
   
Selling for a mere five cents, these Santas represented old Kris Kringle in snow-covered garb. Sometimes makers added gold tinsel to represent sparkling snow. Santa containers came in a variety of sizes, from five to seven-and-a-half inches tall. Santa, himself, had a finely painted red face and white beard and wore a heavy coat. Other Santas wore felt robes trimmed with lamb's wool or felt. Purple crepe paper sometimes lined the inside of the outfit. Some of the Santas carry a tiny wicker basket at their waist or on their back.

The Germans couldn't make them fast enough. The making of these early candy containers involved eight to ten families, each responsible for different areas of production. One family might fashion the boots, another would create Santa's clothing, while another would add Santa's rabbit-fur beard. But the most important step involved painting the face.

Over the years the details of Santa’s face changed. One of the biggest influences was the poem “A Visit from St. Nicholas,” that portrayed Santa as a jolly old elf with a thick, flowing white beard and a white fur-trimmed suit. The public's impression of Father Christmas as a stern, thin old man changed dramatically in the late 19th century when Thomas Nast began illustrating St. Nick as a fat, jolly elf-like character for Harper's Weekly.

People originally saw St. Nicholas, the patron saint of children, as a gift-giving old man who rode a white horse and gave goodies to children. Father Christmas took the initial image of St. Nicholas and gave it a twist, making him an old bearded man who doled out punishments as well as rewards.

Residents of certain parts of Germany saw Christkindchen, the German Christ child, as a gift giver. The English butchered the pronunciation of the name, so that today he’s popularly known as Kris Kringle. This figure traditionally wore a white robe and a white jeweled crown, traveling the countryside on a mule. He was said to have been accompanied by Pelze Nicol, a boy with a blackened face. Yet even Pelze Nicol developed into his own personality, becoming Belsnickle, a sinister-looking Santa who punished bad children.

Important scientific discoveries have also been incorporated into these Christmas figures, the most notable being the invention of the light bulb. Between1907 and 1910, the Germans made Santa candy containers featuring an electric lantern strapped to Santa's chest. The figure also held a feather tree decorated with three electric bulbs. A battery operated all four lights.

Likewise, Santa's means of transportation hasn't remained static over the years. Some candy containers show Santa on a sheep, donkey or mule, while others had him riding a sleigh made of moss. The Germans crafted log sleighs with the bed of the sleigh large enough to hold both candy and small wooden toys known as Ergebirge.

Where makers placed the candy and dried fruit and how they made them accessible varied from one container to another. Santas also carried different types of baskets. Some simply had a cloth or felt bag for goodies. Some candy containers came in two pieces, having removable heads or a cardboard tube that separated when Santa's legs and torso, enabling them to be pulled apart. Other examples, such as those showing Santa on a chimney, had a plug on the bottom or a paper seal.

Regardless of the type, people gave Santa candy containers mostly as gifts. After the receiver ate the  candy, they used the container as a holiday decoration. Even though people brought out these Santas for the holidays each year, they could be easily damaged not only by overzealous children allowed to play with the Santas, but also by prolonged exposure to sunlight. While children might physically destroy the candy container, the sun did consider-able harm by fading bright-red coats to a light-brown or turning the interior of the garment from purple to blue.

What destroyed the great artistry of German candy containers, however, was competition from foreign countries. By the 1920s the public was more willing to accept plainer-looking Santas, and the Japanese provided them. Although the Japanese based their candy containers on German examples, the fine details soon became too expensive to produce. The public accepted cheaper imitations, trading savings for a loss in quality.

It's that loss of true artistry over the years that makes vintage German-made Santa candy containers so collectible today. Prices begin at about $375 but rarer ones often sell for several thousand dollars.

Puff, Puff, Puffing Along

QUESTION: I’m an engineer who has recently retired. Not long ago, I saw some steam-powered toys on display at a local antique show. The dealer couldn’t tell me much about them except that they were produced in the latter part of the 19th century.  I’m fascinated with these toys and would like to start a collection. What can you tell me about them?

ANSWER: Live steam-driven toys have always fascinated young boys and men. It’s probably because of the power they produce and that they’re often so close to the original devices that use steam power to operate.

The use of steam as a power source dates from the early 1840s. By the mid-19th century, steam-powered toys began to appear. Craftsmen hand built toy steam engines for the first 50 years or so and definitely for those who could afford their high price tag. Cheaper models began to appear in the 1870s. By that time, makers constructed stationary engines with the boiler in either a vertical or horizontal position, although the functions of each were essentially the same. The vertical model fit into a smaller space while the horizontal model allowed greater size and power. Though toy engines were often faithful duplicates of the real thing, they rarely had the detail of true scale models.

Such famous toy makers as Bing, Doll and Marklin produced steam-powered toys in Germany. The British manufactured some beautiful examples under the label of Bassett-Lowke. In America, Eugene Beggs of Paterson, New Jersey turned out these mechanical wonders from the 1870s to about 1900 in competition with the famous Ives company of Bridgeport, Connecticut. The best known of all the American firms was the
Weeden Manufacturing Company which manufactured steam-powered toys from  1883 to 1930 in New Bedford, Massachusetts. Other manufacturers included Mamod, Wilesco, Cheddar, Krick, Tucher & Walther, Hermann Bohm, and Blechspielzeug.

The boiler of a steam toy had to be carefully filled with mineral-free water, often from a rainwater barrel. Most of the burners or lamps used alcohol as fuel although manufacturers advertised a few that burned kerosene.

Both substances were highly flammable but not explosive in the open air. Once the user lit the burner and shoved it into place beneath the boiler, it was just a matter of waiting while steam formed in the boiler and pressure gradually increased. When steamed up, the throttle opened, wheels began to spin, and pulleys operated the accessories. And, of course, every steam engine came with a whistle.

Steam-powered trains were a bit more complicated. Many became known as "dribblers" because water often leaked from the boiler. Though the user set a throttle in advance,  there was tittle or no speed control once the locomotive got under way. Once steam had built up, the user set the train on the tracks and let it go until the fuel and water ran out. Often the engine would fly off the rails on a tight curve, spilling the water and burning alcohol. Makers advertised these trains as “safe” toys, since they rarely blew up unless an ingenious boy locked down the safety valve. However, the engines got very hot, enough to produce a nasty burn. Since boys often set up these trains on their mom’s carpet, a derailment and spill often resulted in a good scolding.

Steam-powered boats, on the other hand, were graceful toys, often beautifully constructed of brass. Manufacturers built them around a horizontal boiler with a burner beneath. Steam traveled through a pipe to a cylinder and piston which operated the propeller shaft. An adjustable ruder provided some control but there was always a risk of losing the boat once it got under way. Boys could purchase flimsy tinplate steam motorboats in dime and novelty stores. This toy had a burner and boiler but no cylinder. The steam traveled directly to the stern of the boat and exhausted underwater, propelling the boat until all the steam was used up. Boys called them "put-puts while they referred to more elaborate models as propellers.

By 1886, a boys could purchase a toy steam engine with a vertical boiler from Montgomery Ward for 40 cents plus a nickel for postage. Larger horizontal engines with a walking beam and a flywheel sold for $2. From the same catalog, boys could order a toy steamboat in the 9-inch size packed in a "neat wooden box" for $1.25 or a 13-inch model which ran about 20 minutes for $2.60. In 1888, Ladies' Home Journal provided a Weeden upright steam engine made from 41 pieces at no cost with a subscription. Or the lucky young person could buy an 11-inch steamboat directly from the magazine for $1.50 postpaid.

In 1889 it was possible to buy an upright steam engine from Ward’s catalog for 20 cents but more elaborate engines cost as much as $11. A popular steam toy that year was the Model Steam Fire Engine, with a vertical boiler, single oscillating cylinder, and a pump which spewed water quite a distance.This toy was very similar in appearance to the formidable horse-drawn prototypes which dashed through city streets on their way to a fire, spouting smoke, sparks and steam. The same year boys could also purchase a complete steam train, which ran on a circular track for about 20 minutes with each filling of water. It sold for $8 and came complete with a brass locomotive, two cars, and track.

The British firm of Bassett-Lowke also produced model steam locomotives. One gauge available was 1 1/2-inch, which was close to the present "0" gauge while others came in a  gauge twice as wide. The models ranged from stubby switchers to scale  versions of famous locomotives. In 1902 this firm also offered an elaborate model steam fire engine, as well as a tractor roller, several cranes, and two models of motor cars, all steam powered. 

The early 20th century brought little change in the design and appearance of steam-powered toys. One major innovation was the introduction of electricity as a heat source. As household electricity became more prevalent, the stationary steam engine gradually switched from alcohol burners to electric heating elements. A Weeder model in 1930 came with a 110-volt heating element. The company still made alcohol-burning versions and one hybrid was available with either a two-burner alcohol stove or an electric heater.

Today, some models, such as the 1909 Marklin steam-powered boat, sell at auction for thousands of dollars, putting many steam-powered toys out of reach of many collectors.

ted with these toys and would like to start a collection. What can you tell me about them?

The Porcelain of the Royals

QUESTION: I recently saw some Meissen porcelain at an antique show. I fell in love with it but the price seemed high. What can you tell me about this type of porcelain? I’d like to start collecting it, but I’m not sure I can afford it.

ANSWER: Meissen porcelain was the first porcelain made in Europe. It’s origins are royal. Augustus II, known as Augustus the Strong, elector of Saxony and King of Poland, who reigned in the early 18th century, avidly collected porcelain from China and Japan, as did many of his fellow monarchs. By the time the Asian-made porcelain reached Europe, it was so expensive that only a king or queen could afford it.

For Augustus, it wasn't enough to fill his Dresden palaces with Oriental imports. He wanted his own porcelain, made in Saxony. After a great  many failed experiments and the expenditure of large sums of royal revenue, his court alchemist Johann Friedrich Bottger, hit upon the correct formula and produced true porcelain at Meissen, a suburb of Dresden, in 1708. The early wares of the factory were imitations of the Chinese or Japanese styles.

Although Meissen produced a wide range of porcelain ware, both ornamental and practical, he company  is best known for its figures. From medieval times, German court dining tables had displayed decorative centerpieces composed of mythological, allegorical, or comic figures modeled in wax or spun sugar. Porcelain figures replaced these in the early 18th century. The earliest bore the mark “Hofkonditorei,” meaning royal confectionery. Because of their origins in entertainment, the subjects are usually cheerful and, when modeled in groups or two or more on a single base, often tell little stories.

Johann Joachim Kändler, who worked from 1731 until his death in 1775, was the great modeler at Meissen. In the hands of most modelers, porcelain figures were mere dolls. In the hands of Kändler, they became sculpture. Though collectors seek out all of Kändler's work, they especially admire his animals and birds, based on observations of the royal Saxon menagerie.

The commedia dell'arte inspired some of Kändler's finest work. His contemporaries immediately recognized the stock characters—the Doctor, Pantaloon, Scaramouche, Harlequin, Columbine— from these plays. Kändler dashingly modeled and brilliantly painted them with colors that have faded little in two centuries. These figures have never been inexpensive, and often sell for five figures or more.

Kändler's greatest achievement in tableware was the celebrated Swan Service, which he had his fellow workmen model in the grandest baroque style. It was made between 1737 and 1741 for Augustus's chief minister, Count Bruhl. Consisting of 2,200 pieces—plates, tureens, sauceboats, wine-bottle stands, and candlesticks, among other items—many in swan form and all painted with the Bruhl family coat of arms, the Swan Service has been called "the most beautiful and magnificent table service ever to be executed by a porcelain factory."

Having successfully produced his own porcelain, Augustus began to show signs of megalomania. He planned a "Japanese palace" paneled and furnished entirely in porcelain. He commissioned Kändler to do a life-size statue of him for the palace, but it cracked before it could be fired. A number of animal and bird figures from the project survived, and several examples have been sold.

The most expensive single piece of European porcelain ever sold was a 26½ -inch-tall macaw from the palace project, which brought $195,000 at a 1978 London auction. It came from the collection of German millionaire leather manufacturer Robert von Hirsch and was bought by the Kunstgewerbemuseum of Cologne.

Porcelain making is an art that has made little "progress" in 200 years. Eighteenth-century Meissen is considered by most collectors to be the finest porcelain ever made in Europe. And prices for it reflect that. The costliest lot of porcelain ever sold at auction was a 21-piece Meissen tea service ordered by King Christian VI of Denmark about 1730 and painted with the royal arms of Denmark and the insignia of the Danish Order of the Elephant. It brought $433,000 at a London auction in 1986. The royal connection was obviously a great asset, because a similar 27-piece tea and coffee service from the same period with no such provenance sold for a more typical $70,000. The demand for Meissen is consistent. At most sales and auctions, Meissen sells for prices way above the rest. So if you intend to collect it, you better win the lottery or start saving your dollars—not your pennies.

The German Influence in American Furniture

QUESTION: My husband and I recently discovered an antique wardrobe at a house sale and fell in love with it. We purchased it but have no idea what style it is. The wardrobe is about six feet tall and has large raised diamond shapes on its doors. There’s an additional diamond panel across the top. Can you tell me what this might be?

ANSWER: It looks like you just bought yourself a fine example of American Biedermeier furniture.

The Biedermeier style, itself, was a neoclassic style that originated in Germany in 1815. Popular until about 1850, it was a potpourri of classic features taken from French Empire, Sheraton, Regency, and Directoire styles.

The style’s name derived from Ludwig Eichrodt and Adolf Kussmaul, who depicted the typical bourgeois of the period in the caricature of a well-to-do man without culture under the name “Gottfried Biedermeier.”—“Gott” meaning “God”;  fried” meaning “peace”; “Bieder” meaning “commonplace”:_meier” meaning “steward”—in their Fliegende Blatter  Pamphlets,  a Viennese journal of the day. Critics adopted this name to describe furniture that represented the unimaginative taste of the average person.

However, the style wasn’t called Biedermeier until 1886, when Georg Hirth wrote a book about 19th-century interior design, and used the word "Biedermeier" to describe domestic German furniture of the 1820s and 1830s.

A simpler version of the French Empire and Directoire styles, Biedermeier furniture was comfortable, unpretentious, and spare and was especially suited to the rising European middle class.

By  the 1840s Biedermeier gradually gave way to the curves and flourishes of the neo-Rococo revival in Vienna. Early pieces were generally rectilinear, undecorated, and simple. Towards the middle of period, craftsmen employed curves more in chair backs, legs, etc. Scroll forms became popular after 1840 on bases and legs often with upper terminal animal heads which were sometimes gilded.

When German immigrants came to America in the mid-19th century, many headed for the middle of the country around Missouri.

In the Missouri settlements, the German cabinetmakers modified the sophisticated Biedermeier motifs to fit the simple tastes of their customers. The style's characteristic decorative veneers, curved legs and chair backs, and geometric shapes on flat surfaces were maintained, but the features were simplified. Countrified versions of Biedermeier chairs typically had outsweeping saber front legs and backs made of two horizontal rails.

Simple examples have wooden seats while more elaborate ones are upholstered. Biedermeier influences in wardrobes include raised-panel doors enhanced by diamond motifs and deep cornices. They would have called these chifferobes.

Two-by-Two to the Floating Zoo

QUESTION: When I was little boy, my grandfather gave me an ark, complete with all the animals, each made of wood. I’ve kept it all these years and wonder about its origin. There are some words in German on the bottom. What can you tell me about it?

ANSWER: You’re very lucky to have such a wonderful toy and to have kept it intact all these years. The problem with toys with lots of pieces is that those pieces tend to get mislaid or lost.

Many religions prohibited frivolous play on Sunday, the Lord’s Day. The only toys they allowed with those religious in nature. And what could be more religious than a toy ark. Children spent hours loading and unloading the animals from the ark, marching the birds and beasts in columns two-by-two.

But these toys were anything but playthings. Their exquisite carvings elevate many of them to the level of folk art and their prices to locations high in the stratosphere. But for those collectors with the means to purchase them and the space to display them, the world of ark collecting can be colorful and satisfying.

Often referred to as “Sunday” toys back in the 19th century, arks came into popularity around the 1850s.  The people of the village of Erzgebirge started making them as a cottage industry. Some families built the arks while others handcrafted the animals and still others painted and added details to finish the pieces. German arks feature lathe-turned animals which later have details carved into them.

The British also made arks but started a bit later. Arks became a popular thing to make to raise money for war relief during World War I. Makers painted them red and green and affixed a war-relief emblem to them. At the same time, German prisoners of war in England built arks with stockade-style roofs. Even the folks in Ireland got in on the act and attached a white dove to the ark as a sign of peace.

Toy arks come in all sizes. Larger ones can be up to 30 inches long and contain over 400 animals, plus 8 human figures representing Noah’s family—Noah and his wife plus three sons and their wives.

It’s hard to tell the age of antique arks since most aren’t marked. However, specific construction characteristics can provide some clues. The shape of the bottom is one. Flat-bottomed arks are older. And those planed by hand rather than machine are also older.  The amount and style of the decoration can also be a clue. Earlier arks tend to have less detail and decoration.

The frieze—the decorative border immediately below the ark’s roof line—can also be a clue to its age. An ark with a more elaborate and colorful frieze is more likely to be newer than one with a simple one. Some makers used a strip of decorative paper as the frieze.

Early arks had fewer and simpler animals since it took longer to make them. As tools improved, ark makers made more animals. The animals that came with German arks were always made of wood that a craftsman first turned on a lathe. The marks of his cutting tool appear on the bottom of each piece. All these clues apply to arks made before 1900. After that, construction became more standardized.

The number of animals was directly related to the production cost of antique arks. As there became greater demand, craftsmen built larger arks with more animals. Antique arks, especially ones with all their parts, amount of detail, and in excellent condition, can sell for as much as $40,000. Most smaller ones sell for somewhere between $250 and $800.

‘Tis the Season for Cranberry

QUESTION: Every year at Thanksgiving, I bring out a set of eight sparkling pink glasses that used to be belong to my great-grandmother. They seem so festive and add a holiday note to our dining table. Can you tell me anything about these glasses?

ANSWER: Your glasses are made of cranberry glass, a very special type of glass favored by Victorian hostesses, especially around the holidays. Not only is this glass appropriate for the Thanksgiving and Christmas holidays, but it’s also a popular collectible. In fact, some pieces are worth too much to be used for fear of breakage.

Although glassblowers had been making colored glass since ancient Egypt, it was Johann Kunckel, a 17th-century German chemist from Potsdam, who came up with the red color by adding gold chloride to the clear crystal. During the 19th century, English and American glassblowers experimented with adding less gold choride, resulting in a pink glass which the Americans called “cranberry.”

And thanks to the virtuosity of these glassblowers there seems to be an endless variety of shapes and patterns of this glass on the market. In addition to tumblers and water pitchers, there are salt cellars, sugar shakers, cruets, jars, jugs, decanters, celery vases and finger bowls. Among the widely used patterns are "Swirl," "Coin Dot," and "Daisy & Fern." Some of the most rare and expensive items found from this time period are beautiful lamps and other lighting fixtures.
           
As with any collectible, cranberry glass can also be an investment. Pieces that sold for less than ten dollars a generation ago are now worth hundreds of dollars. Because of the natural fragility of glass, antique cranberry glass has become relatively scarce, though it does turn up in thrift and antique shops,  flea markets, and auctions.           

Although cranberry glass had peaked in popularity by the end of the 19th century, manufacturers produced it in quantity through the 1930s. The last two companies to make this unique glass—The Pilgrim Glass Corporation and Fenton Art Glass —went out of business early this century. Pilgrim Glass Company produced beautiful blown cranberry glass ranging from various vases and baskets to candle holders and sold them in department stores and gift shops around the country until 2001. At the time if the company's closing, cranberry was its most popular type of glass. Fenton Art Glass marketed new cranberry glass, featuring opalescent decoration with coin dots, daisy patterns and numerous other styles, through retailers around the country until it closed in 2011.

Cranberry glass has always been made in craft production rather than in large quantities, due to the high cost of the gold and the delicate mixing process required. Glassmakers dissolve the gold chloride in a solution of nitric acid and hydrochloric acid, known as “aqua regia.” Gold in the batch reacts with intense heat to create the beautiful cranberry color. A glassworker called a “caser” attaches a “bud” of this glass mixture to a blowpipe. Then the glassblower stands on a platform with the mold below his feet and blows the molten glass into the mold to create the desired shape. Afterwards, another glassworker places the piece in a “lehr” or annealing oven where it slowly cools to room temperature. Most cranberry pieces are hand blown or molded and often contain small bubbles and striations.

The Often Confusing World of Antiques

QUESTION: Every time I go into an antique mall or visit a show, I become overwhelmed by all the items.  How can I make sense of it all?

ANSWER: If you’re like this person, perhaps you’re mind and senses have gone into antiques overload. So many items–furniture, ceramics, pictures, jewelry, old Coca-Cola signs and things that look like the cat dragged them in. So where’s the good stuff?

It all seems so confusing. And the prices for some products seem ridiculous , especially if you’re a beginning collector. But don’t despair. There’s a method to all that antique madness. Believe it or not, there are some main categories.

When most people think of antiques, they think of furniture. And though it makes up a good percentage of antiques out there, smaller items, known as “smalls” in the antiques business--ceramics, glassware, silverware, toys, and commemorative items–all play important roles.
All in all, there are about 15 major categories and 75 sub-categories. Within these there are other, more specialized areas, such as antique maps and posters, two very specialized categories.

Even though antiques can be categorized generally, dealers and serious collectors use historical periods–Victorian, Roman, Gothic, Civil War, Western and even the1950s–to sort things out.
Often, these terms also indicate different styles.

For instance, in the world of furniture, you’ll probably see examples of English, French, American, and Chinese styles at most antique malls, shows, or auctions. Most English furniture falls into the pre-Victorian or Victorian category while American furniture tends to fall into different types: Pennsylvania, Shaker, New York, etc..

Porcelain or pottery pieces fall into categories associated with the country in which they were made–England, Germany, France, American, Chinese and Japanese are just a few. The four you’ll see most are English, German and Japanese, and American. You’ll soon become familiar with names such as Royal Doulton, Staffordshire, and Meissen, Blue Willow, Limoge, Belleek and Sevres, especially if you frequent the better antiques venues.

Glassware is the third most popular category. You’ll see all types, including Depression, Venetian, English, and Czech glass. Most glassware collectors specialize in a particular produce line–bowls, tumblers, decanters, etc. There’s also a refined category known as art glass in which you’ll find all those pretty vases blown in amberina, peach blow, and ruby.

These are just some of the many categories of antiques that you can begin to collect. While some tend to be higher priced, you’ll find plenty of small pieces of furniture, ceramic, and glassware to get you on your way.

The Beauty of Christmas Kugels

QUESTION: I came across a heavy white glass ornament with what appears to be some sort of decals on the bulbs. Also each one has a colored stone–almost like birth stones–indented into the ornament. All the tops are a gold finish. I have seen a lot of ornaments but none like these. Any ideas?

ANSWER: It sounds like this person has discovered a kugel, a type of heavy glass Christmas ornament made in Germany from about 1840 until 1914. The word kugel means “ball” in German. The first ones were smooth, heavy glass balls that were too heavy to hang on anything but a stout pine in the yard, so people hung them in their windows.

Louis Greiner-Schlotfeger invented the kugel to compete with the glassblowers of neighboring Bohemia who had perfected blowing glass beads lined with lead mirroring solution with produced a brilliant shine. And though he was able to duplicate the lead mirroring solution, he couldn’t hand blow his kugels thin enough. The result was heavy pieces of glass shaped as balls in a rainbow of colors in sizes ranging from an inch in diameter to over 30 inches.

Originally, the glassblowers hung their kugels with bits of wire. After blowing a glass bubble, they snipped it from the blowing tube which resulted in a small neck with a hole leading to the inside of the kugel. They ground the neck down leaving just a hole and attached a decorative brass cap, held in place with wire arms that spread apart inside the glass sphere. Finally, they attached hanging rings to the caps and hung them with wire hooks.

It wasn’t until 1867, when Greiner-Schlotfeger’s village built a gas works that he had a steady, hot, adjustable flame, enabling him to blow thin-walled glass balls. From that point, it was a simple step to blowing glass into cookie molds shaped like fruits and pine cones. While the glassblowers still called them kugels–more specifically Biedermeierkugeln, referring to the Beidermeier Period in which they were made–they technically weren’t any longer and soon people called them Christmas ornaments.

By 1880, full-sized trees decorated with expensive imported German glass ornaments became all the rage among the wealthy. American retailer, F.W. Woolworth, saw these ornaments on a trip to Germany, but was reluctant to order any for his stores–at least at first. To his amazement, his original order sold out in two days.

For more information on kugels, read my article on antique Christmas ornaments.