Back to Nature

QUESTION: Recently I got a rustic night stand from my grandmother’s house after she died. She had once said that it came from a sale of furniture from a cabin in the Adirondack Mountains here in New York State. I’ve never seen anything quite like it. It’s a funky piece, and I’d like to know more about it. Can you help me?

ANSWER: Your grandmother’s night stand is indeed a piece of rustic furniture, also known as Adirondack furniture, even though it wasn’t restricted to just the Adirondack region.

The idea for rustic furniture came about in the late 18th century at the beginning of the back-to-nature movement, a change from the world of classic, predictable furniture patterns to one of more fanciful design using natural materials. 

Little summer shelters appeared in city gardens, often covered in vines or surrounded by trees and shrubs. These summerhouses also provided a small green refuge that shut out the discomfort and ugliness of city life.

Designers copied nature's lines in drawings for chairs and settees for these shelters and the garden paths around them. Their plans called for gnarled, distorted limbs of shrubs and trees to make a chair or bench, instead of the usual marble or plain wooden seats. Gardens, themselves, became more picturesque and less formal, with curving paths taking the place of straight ones. Designers strategically placed rustic chairs, benches, arbors and gates throughout the plantings.

At the same time came the discovery of warm springs in America. Basic living conditions were the rule in the hotels and cottages that sprung up around the springs. The coarse furniture changed from plain and primitive to fanciful and rustic as hotel owners updated amenities.

By the late 19th century, America’s millionaires filled the resorts, but although they considered themselves naturalists, they dressed and lived formally in the midst of the rustic furniture, for they had no intention of roughing it.

But some of these naturalists set up their own camps with tents and log cabins and built rustic furniture for them or had local craftsmen do it for them. Eventually, the log cabins became large log houses with all the latest amenities. Soon they became known as compounds or family camps. However, life in these camps was more back-to-nature and relaxed than at the warm springs resorts.

Rustic outdoor furniture filled the porches of these houses and spilled onto the grass. Couches and chairs made of rough pieces of local woods, holding loose cushions, adorned the sitting rooms. Even the beds showed off the rustic style, often with fanciful patterns on the head and foot boards.

The term rustic furniture covers a functional style made of organic materials, such as the tree or shrub limbs and roots or the trunks of saplings indigenous to area of the craftsman. Although roughly made, the style was often sophisticated and imaginative. The more knots there were in the limbs, the more the designers favored them. They even left the bark on the wood whenever possible to give each piece more texture and individuality.

In the Adirondack region of New York State, craftsmen made rustic furniture for the wealthy families who had camps there. They used large, gnarly roots in their furniture designs, making them into table legs and chair arms. They favored birch to build with, a slender tree with bark that peels in strips, giving the craftsmen a striking veneer for their furniture. These pieces quickly became known for their geometric designs made of the white birch bark veneer, especially on case furniture, such as your night stand. Also, many of the intricate veneered designs included various kinds of split twigs, carefully chosen by color to form patterns.

Appalachian craftsmen took pride in knowing how to get wood to work for the intricate twists, bends and weaving for their furniture designs. They knew just when and how to bend saplings while they were still growing, letting nature do some of the work before they were ready to use the wood. The best woods to use were laurel, hickory and willow because of their flexibility and strength. They built their furniture with graceful loops and interwoven curves, weaving each piece of wood to create tension, resulting in a hid-den strength disguised by the fragile look of the design.

Today, you’ll find rustic pieces at higher-end antique shows. Occasionally, they’ll appear at flea markets. But people consigned a lot of pieces to the bonfire after they went out of fashion in the mid-20th century. So prices tend to be on the high side because of the uniqueness of the pieces. Twig rockers can sell for $150 and up, while lounges and settees can go over $2,000.
Case pieces rarely come on the market and when they do, their prices are exceptionally high, often in the four and five figure range. The most common pieces are various chairs and plant stands, priced anywhere from $75 to $600.

As the 20th century moved forward, individual craftsmen found it hard to keep up with the volume of orders, so factories opened to meet the need. Business remained brisk for the rural craftsmen until the 1940s and by the 1950s, rustic furniture was no longer popular.

Woven Beauty

QUESTION: I recently purchased a wicker table at an antique show. It doesn’t have any markings and the dealer who sold it to me couldn’t tell me much about it. I love this piece and it now occupies a prominent place in my den. Can you tell me anything about it? And can you also tell me a bit about the origins of wicker in general.

ANSWER: Wicker has been around for quite a while, but your table originated during the peak of its popularity. Back then, the ornateness of wicker brought an element of taste to middle-class American homes.

Back in the 17th century, the Dutch made wicker and brought it to England before sailing across the Atlantic to the New World. For the next several centuries objects made of wicker imported from Europe decorated American homes.

Until the 1850s, furnishings were inexpensive and serviceable, therefore easily disregarded. Then through a changing cultural, economic, and social conditions, wicker became a status symbol for America's rising middle class.

Although the mass production of wicker began in America, the main materials used in its manufacture—cane and reed—came from rattan palms, which grew wild in Asia. In the early 1840s, Cyrus Wakefield, a shrewd young Yankee grocer, noticed huge quantities of rattan being discarded around the Boston docks after serving as packing material to protect cargo on clipper ships returning from Asia. Discovering that chairs and tables could be made more cheaply from this strange material than importing finished pieces, he began making small pieces of furniture using this discarded rattan.

In 1873 he founded the Wakefield Rattan Company in Wakefield, Massachusetts. By the end of the decade, his firm accumulated sales of over $2 million. At its peak, his  company employed 1,000 workers in 30 buildings in Wakefield and another 800 in  Chicago.

Wakefield's successes encouraged Heywood and Brothers Company, wooden chair makers in Gardner, Massachusetts, to begin making wicker furniture in 1876. For the next 20 years, the two companies competed fiercely and dominated the industry.

Both companies responded to economic prosperity following the Civil War which enabled middle class families to leave America’s dirty, crowded cities for clean, airy suburbs, prompting a demand for wicker furnishings. These light, airy pieces were ideal for the new gabled and turreted Queen Anne-style homes and for the verandas of resort hotels catering to the new vacationing middle classes.

Because it was easy to keep clean, wicker attracted those concerned about sanitation, and its lightness, adaptability and design potential, Victorian tastemakers loved it. Wicker not only satisfied those with good taste but did it at an affordable price.

When the Aesthetic Movement swept America in the 1870s, stressing the uplifting moral and spiritual influence of artistic decors, tastemakers recommended the use of ornamental wicker in people’s homes. This emerging middle-class interest in aesthetically correct furniture encouraged Wakefield and other manufacturers to create increasingly ornate pieces that people associated with art and beauty. Fancy wicker enhanced the ostentatiously overdecorated Victorian parlors and expansive porches while proclaiming the taste of its owners.

Curling, shaping and twisting pliable lengths of wetted reed into whimsical scrolls, spirals, and whirlygigs, skilled craftsmen fed the Victorian fever for more exotic wicker objects. They incorporated a variety of astronomical and botanical forms, flags, Oriental fans, shells, and ships into their elaborate designs. Two of the most unique pieces was the tete-a-tete, in which two people could sit side by side or the serpentine "Conversation Chair,"  in which a courting couple could sit facing each other.

Elegant tables were important to the decor of Victorian homes. With its intricate grid of legs and embellishments, fancy skirt and caned top, a square table would have added grace and utility to its owner's room.

The growing demand for more elaborate forms reached its peak during the 1890s, when American wicker became more fanciful and ostentatious. A good example is the "Fancy Reception Chair,” featuring intricate tiny scrolls and frilly curlicues. Often designed as show pieces for elegant parlors rather than for actual use, these ornate chairs are fairly hard to find today and often sell for upwards of $1,000 in good condition.

By the turn of the 20th century, Victorian ornate design faded in favor of simplicity. Design reformers instead promoted the "Bar Harbor" style, simplified wicker furnishings with wide open, diagonal latticework that would fit plain, open interiors.

Just before World War I, the Arts and 'Crafts movement inspired American wicker   manufacturers to create boxy, unornamented shapes ideal for the minimalist interiors of bungalow homes. Arts and Crafts leader Gustav Stickley produced a line of square and severe willow furniture using geometric designs. However, by the  beginning of the Great Depression, wicker was all but dead in America.

Rocking Into Butter

QUESTION: I recently purchased an odd sort of butter churn at a local antique show. It’s a horizontal container suspended by straps to a truncated wooden frame. The only type of butter churn I’ve heard of is the vertical cylindrical type. It has the name and location of the company that made it—"Davis Swing Churn, No. 2, Vermont Farm Machine Co., Bellows Falls, Vt."—painted on both sides. Can you tell me something about it?

ANSWER: What you have is what’s commonly called a “rocking churn.” It seems women used to hook the churn to a rocker using a hook and a length of rope and as they rocked, they pulled the churn from side to side, agitating the cream inside.

To better understand how this type of churn works, it’s important to know how the churning process works. Women used a variety of churns to turn cream into butter. The most common type of churn is the vertical churn into which a person inserted a pole inserted through the lid.

The agitation of the cream, caused by the mechanical motion of the device, disrupts the milk fat. This movement breaks down the membranes that surround the fats in the cream, forming clumps known as butter grains. These butter grains, during the process of churning, fuse with each other and form larger fat globules. The mechanical action introduces air bubbles into these fat globules. The butter grains become more dense as fat globules attach to them while action forces the air out of the mixture. This process creates buttermilk. With constant churning, the fat globules eventually form solid butter and separate from the buttermilk. The butter maker then drains off the buttermilk and squeezes the butter to eliminate excess liquid, forming it into a solid mass.

Historians believe the word “butter” came from the Greek word boutyron, meaning “cow cheese.” That’s because goat’s milk doesn’t work well to produce butter because of its lower fat content.  Evidence for the use of butter dates back as early as 2000 B.C.E.. And the butter churn, itself, may have existed as early as the 6th century A.D. Historians also believe that early nomads may have discovered butter by accident after having filled skin bags with milk and loading them onto pack animals. The movement of the animals shook the bags, creating butter.

Before commercial dairies began producing butter, every home had tools to make its own. Butter churns came in a variety of styles. The most common is a container, made of stoneware in the mid-19th century and later of wood, where the person making the butter creates it by moving a pole, inserted into the lid, in a vertical motion. This type of churn is also known as an “up-and-down”’ churn, plunger churn, plumping churn, or knocker churn.  The staff used in the churn is called a dash, dasher-staff, churn-staff, churning-stick, or plunger.

Another common type of butter churn is the paddle churn. The butter maker turned a handle that operated a paddle inside a container, causing the cream to become butter. Yet another type is the barrel churn. This consists of a barrel turned onto its side with a crank attached. The crank either turns a paddle device inside the churn, as in the paddle churn, or turns the whole barrel, whose action converts the milk to butter.

Finally, there the rocking chair butter churn, invented by Alfred Clark. This device, invented by Alfred Clark, consisted of a barrel attached to a rocking chair. While the rocking chair moved, the barrel moved and churned the milk within into butter. Today, a rocking butter churn in good condition sells for over $500.

A, B, C, D, E, F, G...

QUESTION: My grandfather gave my parents a wooden child’s chair, covered with letters, that he had when he was a kid for me to use. I remember singing the alphabet song while sitting in the chair, and that’s pretty much how I learned my ABC’s. My grandfather is gone now, but I still have the chair. Can you tell me anything about this chair?

ANSWER: What you have is a wooden alphabet chair with lithographed letters of the alphabet decorating it. If your chair is in really good condition—many of these are not—then you have something of some value.

Lithographed toys range from dollhouses to acrobat figures to nests of blocks to an array of boats, horse-drawn carriages, and trains. Collectors value for their often substantial size, handsome graphics, and careful attention to precise details.

Of the three types of lithographed toys—tin, wood, and cardboard—the latter two have vibrant, two-dimensional details printed on paper that’s combined with a three-dimensional shape. Collectors appreciate the intimacy and color of these hand-drawn but mechanically printed designs.

Before the development of chromolithography—the process of printing a color picture from a series of lithographic plates—by German printers in the 1840s, toys had to be handmade. So most toys were too expensive for all but wealthier people. Less affluent families had to make do with homemade toys.

By the 1870s, French, English, and American firms had patented chromolithography production methods, which offset designs from inked sheets or rollers onto toy surfaces. By the 1890s, they had standardized the process, and both the American and European toy industries were able to mass-produce colorful toys inexpensively. In time, American toymakers, such as Rufus Bliss, John McLoughlin, and Parker Brothers, refined the technique and became world-leading toy manufacturers.

Production of all three types of lithographed toys ran from the late 19th century into the early 20th. But just as horse and steam power gave way to the internal combustion engine, production of wood and cardboard lithographed toys waned as technology developed. By the 1920s, after ore became available for cast-iron toys, manufacturers found metal better suited for mass production and that lightweight tin could more easily house clockworks and springs than wood.

The mass production of toys came at a time when parents were beginning to view their children less as miniature adults to be instructed and more as children to be entertained as well as taught.

Numerous wood lithographed replicas of horse-drawn fire engines, prairie schooners, steamboats, and luxury side-wheeler river steamers paralleled a strong interest in the rapidly changing modes of transportation at the turn-fo-the-20th-century.

Today wooden lithographed toys are available at auctions; estate sales, and flea markets. Because of their fragility, however, it’s difficult to find examples in excellent condition. Those that have survived the years are worth from $50 to $4,000, depending on size, condition, and rarity. Since your alphabet chair is of the larger variety, it’s worth more, depending on its condition.