The Beauty is in the Cards

 

QUESTION: One of my passions is to visit historic houses. In many of them from the 19th century, I often see beautiful coverlets on the beds and sofas. House docents have said that women produced these coverlets on a special type of loom. I know they were done on a special kind of loom, but I forget what it was called. Can you tell me more about this special loom?

ANSWER: The unique designs of those coverlets were possible by the invention of the “Jacquard” loom. But coverlets weren’t the only types of weaving produced on this loom. By the 1850s, factories began using larger versions of the Jacquard to produce not only coverlets but two-sided carpets. Before the Jacquard loom, complex, figural designs were more difficult to produce alone on the same loom. 

Joseph-Marie Jacquard, a French weaver and merchant, patented his invention in 1804, he revolutionized how patterned cloth could be woven. His machine made it possible for complex and detailed patterns to be manufactured by unskilled workers in a fraction of the time it took a master weaver and his assistant working manually. 

A Jacquard loom wasn’t a particular type of loom but a control mechanism that’s added to a variety of looms. 

The spread of Jacquard's invention caused the cost of fashionable, highly sought-after patterned cloth to plummet. It could now be mass produced, becoming affordable to a wide market of consumers, not only the wealthiest in society.

To weave fabric on a loom, a weaver passed a thread, called the weft, over and under a set of threads, called the warp. The weaving of threads at right angles to each other  formed the cloth. The particular order in which the weft passes over and under the warp threads determined the pattern. 

Before the Jacquard system, a weaver's assistant, known as a draw boy, had to sit on top of a loom and manually raise and lower its warp threads to create patterned cloth. But this was a slow and laborious process.

The key to the success of Jacquard's invention was its use of interchangeable cards into which small holes had been punched, which held instructions for weaving a specific pattern and took over the time-consuming job of the draw boy. 

When fed into the Jacquard mechanism, fitted to the top of the loom, the cards controlled which warp threads should be raised to allow the weft thread to pass under them. With these punch cards, Jacquard looms could quickly reproduce any pattern a designer could create, and reproduce over and over.

The designer first painted a pattern onto squared paper. Then a card maker translates the pattern row by row onto the punch cards. For each square on the paper that wasn’t painted in, the card maker punches a hole in the card. For each painted square, he didn’t.

The cards, each with their own combination of punched holes corresponding to the part of the pattern they represent, were then laced together, ready to be fed one by one through the Jacquard mechanism fitted to the top of the loom. 

When the mechanism pushed a card towards a matrix of pins in the Jacquard mechanism, the pins passed  through the punched holes, activating hooks to raise their warp threads. Where there were no holes the pins press against the card, stopping the corresponding hooks from raising their threads. 

A shuttle then travels across the loom, carrying the weft thread under the warp threads that have been raised and over those that have not. This repeating process causes the loom to produce the patterned cloth that the punch cards have instructed it to create.

The Jacquard mechanism is a device fitted to a loom that simplifies the process of manufacturing textiles with such complex patterns as brocade, damask, and matelassé. The resulting ensemble of the loom and Jacquard machine is then called a Jacquard loom.

Unlike regular looms which are faster and less expensive to operate, looms with a Jacquard mechanism are slower and costlier to operate.

Threading a Jacquard mechanism was so labor-intensive that weavers threaded many looms only once. They then tied subsequent warps into the existing warp with the help of a knotting robot which tied each new thread  individually. Even for a small loom with only a few thousand warp ends, the process of re-threading could take days.

Factories had to choose the looms and Jacquard mechanisms to suit the requirements for their product. They used larger capacity machines or multiple machines which allowed greater control over bigger designs woven over the width of the loom.

The Jacquard attachment first appeared in America in the early 1820s, probably by one of the many German, English and French hand weavers who had immigrated from their native countries in Europe. These immigrant weavers tended to settle in areas with populations of their own ethnic group and near sources of good quality wool. Many brought some type of Jacquard attachment or at least the experience to use one. Some even developed their own devices based on Jacquard's idea and patented them in the U.S.

Jacquard weavers derived the patterns and motifs they used from well-known folk traditions of Western Europe. The designs of most Illinois coverlets can be traced back to Ohio and Pennsylvania coverlets. The center field patterns were either a large, repeated symmetrical motif on two-piece ones or a centered medallion on single-width coverlets. Floral motifs appeared most frequently, in the Four Lilies and Sun-burst, Four Roses, Octagonal Four Roses, Four Leaves and Four Acorns, and Four Bellflowers patterns. Star and Sunburst designs were also common.

Families in the 19th century often used Jacquard coverlets when taking long journeys in a horse-drawn carriage or stage coaches. In America, the practice of making coverlets using Jacquard looms began to fade during the fourth quarter of the 19th century. The import of cheaper materials into the U.S. became a difficult hurdle for weavers to overcome.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Advertising of the Past" in the 2023 Spring Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Affordable Italian Majolica

 

QUESTION: Recently, I’ve fallen in love with Italian majolica pottery. While some consider it garish, I find the colorful motifs uplifting. The prices I’ve seen for it online seem to be all over the place. But there are some lovely pieces available for around $50. Is this a good item to collect? The styles also seem quite varied. Can you tell me more about its history and about some of the styles?

ANSWER: Compared to English majolica, the Italian versions, for the most part, are still relatively low in price, so therefore, affordable. And as with any other antique or collectible, you should collect what you like, regardless of what other people think. Italian majolica of one sort or another is still being produced from Tuscany in the north to Sicily in the south. 

Even though the English Victorians displayed the bright colors and fanciful shapes of majolica pottery to give the appearance of wealth, no one made majolica like the Italians.  

So what exactly is majolica ware? Majolica is a soft and porous earthenware with molded designs that artists hand decorate in brilliant colors. It has a thick coat of clear metallic glaze made up of metallic oxides added to clear lead sulfates which produces its vivid colors.

This type of pottery originated over 2,000 years ago in North Africa, where potters introduced the technique of adding an opaque tin glaze to baked clay. During the 8th century, when the Moors joined together to conquer Spain, they brought the secrets of majolica with them.

During the Renaissance, Spaniards exported their version of tin-glazed pottery to Italy from Majorca, an island shipping port in the Mediterranean. The Italians called the colorful pottery “majolica,” as this was how they spelled the Spanish island's name.

From the late 13th century, potters in central Italy, especially in and around Florence, refined production of tin-glazed earthenware. But it wasn’t until the 15th-century that potters began to appreciate the full artistic potential of majolica. Famous 15th-century sculptor Luca della Robbia wanted to add color to his creations, and the new material was perfect. He and his family became renowned for creating large wreaths of naturalistic majolica fruit. The success of their wares encouraged the production of majolica in both Arezzo and Siena.

But by the second half of the 15th century, Florence had lost its pre-eminence as a center of majolica production, and its manufacture scattered out among small communes..

Potters from Montelupo set up the potteries at Cafaggiolo. In 1490, twenty-three master potters of Montelupo agreed to sell the year's production to Francesco Antinori of Florence. Montelupo provided the experienced potters who the Medici family set up in 1495 at the Villa Medicea di Cafaggiolo.

In the 16th century, potters began to produce majolica at Castel Durante, Urbino, Gubbio, and Pesaro. The early 16th century witnessed the development of istoriato wares on which artists painted historical and mythical scenes in great detail. And by the end of the 16th century, potters in Venice, Padua, and Turin and as far south as  Palermo and Caltagirone in Sicily began producing majolica.

The variety of majolica styles that arose in the 16th century defies classification. Dozens of styles emerged with even more sub-groups, each with its own shapes and decorative motifs. Italian city states encouraged the pottery industry by offering tax relief, citizenship, monopoly rights, and protection from outside imports.

Cipriano Piccolpasso compiled an important mid-16th century document that discussed  the techniques of majolica painting. He noted the work of individual 16th-century masters like Nicola da Urbino, Francesco Xanto Avelli, Guido Durantino and Orazio Fontana of Urbino, Mastro Giorgio of Gubbio and Maestro Domenigo of Venice.

During the 18th century, majolica wares came under increasing competition from porcelain manufacturers. To  face this competition, majolica potters introduced the process of third firing, called  piccolo fuoco in the mid-18th century. After the traditional two firings at 1750°F, potters painted the vitrified glaze with colors that would have degraded at such high temperatures, then fired the pieces a third time at a lower temperature, about 1100 to 1200°F. Potters introduced new vibrant colors, particularly red and various shades of pink obtained from gold chloride. 

Historians believe that one of the first to introduce this technique in Italy was Ferretti in Lodi, in northern Italy. Lodi majolica had already reached high quality in the second quarter of the 18th century. With the introduction of the third firing technique and increasing interest in botany and scientific observation, potters developed a refined production of majolica decorated with naturalistic flowers.

The Ginori family founded a factory to produce majolica in Milan in 1735. The company's head chemist, Giusto Giusti, began experimenting with traditional majolica techniques in the 1840s, and the company began producing outstanding examples of Victorian majolica in the 1850s.

Ginori made monumental display vases and wall plaques to decorate the halls and stairwells of middle class Victorian homes. The company's 's specialty was its “grotesque” decoration. Taken from ancient Roman art, the bizarre creatures were a combination of animal, human and plant forms. Ginori was a very successful majolica producer and enjoyed royal patronage. Most majolica items made by the firm are marked with a crown above the word "GINORI. ".

Ulisse Cantagalli of Florence was another large producer of 19th-century Italian majolica. From the 1870s until 1901, Cantagalli produced a tremendous amount of majolica to be sold at moderate prices. A company catalog dated 1895 lists almost 1,100 majolica pieces. Catagalli's early wares were replicas of the reliefs by della Robbia. His luster glazes showed a strong Spanish-Moorish influence. The company’s pieces bear the mark "CANTAGAL FIRENCE" and an encircled rooster seal.

Production of Italian majolica wares continues today, mainly in reproductions of the historical style. Contemporary majolica looks different from old majolica because its glaze is usually made more opaque with cheaper zircon rather than tin. However, some potteries specialize in making authentic looking Renaissance-style pieces with genuine tin glaze.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Advertising of the Past" in the 2023 Spring Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Happy Meals for Happy Kids

 

QUESTION: I was going through some boxes in our attic and discovered one filled with those little toys my kids used to get in McDonald’s Happy Meals. Most people, especially mothers, consider these junk. Do they have any value or should I just toss them?

ANSWER: Believe it or not, some of those little toys are actually little treasures, depending on their condition. McDonald's is famous for its Happy Meals, and kids the world over I have been fattened up on weekly doses of them for over 40 years. Since the early 1980s,  the main hook has been the toy included with the meal. 

Many collectors of McDonald's memorabilia are mostly interested in toys that relate to specific McDonald's characters, but there have also been many tie-ins with established movie, TV and toy lines. Those tie-in items appeal to collectors who are specifically interested in what the Happy Meals promoted.

The first major tie-in to the action adventure market was with Star Trek. The series  returned from TV limbo in the form of a highly promoted film in 1979, and producers planned a huge promotion. This included Star Trek Happy Meals based on the movie. Six different boxes featured activities. One box encouraged kids to fill in the dots to complete a picture of the Enterprise while another offered a chance to decode a message with Mr. Spock, and so on. Toys and premiums included plastic Video Communicators, iron-on transfers of the characters and the Federation symbol, and "Navigational" wrist bracelets. 

Just as collectible are the items that McDonald’s made available to their restaurants, such as display signs, a cardboard Enterprise, and, rarest of all, a silver smock worn by McDonald's employees, which featured an emblem that combined the Star Trek and McDonald's logos. 

Another heavily merchandised franchise was The Dukes of Hazzard, the campy rural action show that dominated TV in the early 1980s. In the summer of 1982, McDonald’s  test marketed a Dukes of Hazzard promotion in St. Louis. The items included plastic cups with pictures of the various characters, and vacuumed plastic meal containers in the shape of the vehicles from the series, including the General Lee car and Daisy's Jeep.

Hot Wheels came to McDonald's in 1983.The cars were the subject of a national promotion, but there were also certain cars distributed only on the East Coast, and some only on the West Coast. Others appeared nationwide. McDonald’s offered 14 Hot Wheels cars in Happy Meals at any given location. There were "Collect All 14" store displays that included these 14 cars. The cars from this promotion individually sell for  $10 to $15, but the 14-car display unit commands can sell for between $300 and $400.

E.T. was a huge promotion for McDonald's, thanks to the family-friendly appeal of the movie. Although E.T. appeared in theaters in the early 1980s, the first Happy Meal with an ET theme didn’t go on sale until 1985. It offered  two different box designs and a series of four posters depicting scenes from the film.

Hasbro, the toy industry giant, got into Happy Meals with a combined promotion for Transformers and My Little Pony. Transformers, robots that became vehicles and other mechanical devices, were one of the top selling action figure lines of the 1980s. Each original Happy Meal promotion include four different small Transformers. Today, they sell for between $40 and150 each for diehard Transformers collectors and up to $100 if they’re still in their cellophane baggie packs.

Ghostbusters, the cartoon TV show known as the Real Ghostbusters spun off of the hit movie, became the next big craze for kids in the action/adventure genre. Ghostbusters appeared in McDonald's Happy Meals in 1977 with four different boxes and school supplies based on the Marshmallow Man and Slimer ghosts seen in the film and cartoon series. These included a pencil case, ruler, note pad and eraser, pencil and pencil topper, and pencil sharpener. All are difficult to find and highly collectible.

Hot Wheels returned in 1989 with more cars available in different regions. There was a 12-ear display that now sells for $300, followed by repeated promotions, shared by Mattel's other titan, Barbie, throughout the 1990s.

Not to be outdone, Matchbox also had a promotion in 1988, featuring a 16-car counter display and cars that now sell for $8 to $10 each.

The I990s proved to be even mare interesting for action-adventure tie-ins, as several popular super heroes became involved with Happy Meal promotions.

1991 saw McDonald's teaming with Disney to promote Hook, the retelling of Peter Pan with Robin Williams and Dustin Hoffman. The official Hook Happy Meal boxes, which featured striking artwork, contained four Hook floating bathtub toys.

A tie-in with the TV cartoon version of Back To The Future caused some controversy. The assortment consisted of four rolling toys, but Doc's time traveling Delorean car had wheels that small children could remove and swallow. McDonald's issued an advisory to parents, urging them to avoid giving the cars to small children. The next big promotion also had its share of problems.

In 1992, McDonald's was ready to cash in on Batman merchandising and featured a big promotion involving Batman Returns with four vehicle toys, including Catwoman’s car. 

For some reason, Halloween toys are usually big hits. The Ronald and Pals Haunted Halloween McDonald’s Happy Meal set featured a 20-inch display used at McDonald's restaurants in the 1990s. The company ran their 1998 promotion nationally during October. Unfortunately, many store managers trashed most of the displays afterward. The promotion included six toys—I am Hungry, Witch Birdie, Black Cat Grimace, Jack-o-lantern McNugget Buddy, Ghost Ronald, Scarecrow Hamburglar and Ghoul.

The McDonald’s Happy Meal for Disney Toy Story2 in 1999 includes pretty much every recognizable toy from the "Toy Story 2" movie. The complete set included an incredible  20 toys, which doesn’t seem possible for the movie.

Not all McDonald's toys were tiny plastic junk. Some, like It’s Happy Meal Girl Doll from 1997,  were big plastic junk, part of a series of Happy Meal baby dolls. Actually, these dolls were surprisingly well made for something produced by a burger chain.

And while the intention of Happy Meals was to get kids to eat McDonald’s foods and make them happy, those same little toys are making many collectors happy as well. 

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Advertising of the Past" in the 2023 Spring Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Horn a Plenty

 

QUESTION: I’ve always been fascinated by antique items made of horn. I see them in cases at antique shows all the time. I’ve even purchased a hair comb or two and a walking stick with a horn handle. But I have no idea how these items were produced. I assume most of them were made in the 19th century, but I’m only guessing. Can you give me some insight into the production of products from cow’s horn.

ANSWER: Horn has long been used to make various utilitarian objects. Ancient people blew through it to call meetings and such. Other horns held gun powder for muskets. And ornate hair combs made of horn were all the rage in Victorian times.

Long before synthetic materials like Celluloid, Bakelite,  and Lucite came on the scene,  Mother Nature provided an interesting assortment of moldable organic materials. These unique substances from plants and animals are known as "natural plastics."

Thermoplastics are materials that are made pliable by the application of heat, then molded with pressure or by casting in a cold mold. Additional applications of heat will subsequently re-soften thermoplastics and distort the original molded shape of an object. Though many modern thermoplastics are recyclable, antique thermoplastics can be permanently damaged by heat. Testing methods, such as exposure to hot water and the ever-popular hot pin test, can ruin valuable antique objects that are very often irreplaceable. So caution should be taken when trying to identify the materials from which some antique molded items are made.

Collectors seek objects fashioned from natural thermoplastic materials like cow horn in the 18th and 19th centuries. Over time, people used horn for a .variety of useful and ornamental applications. It required persistence and hard work to understand its unique properties. Through trial and error, ingenuity and luck, horn smiths developed successful fabricating techniques for working with horn.

Horn is a form of a protein called keratin, the same type of material as in fish scales, bird feathers, human hair and fingernails. Tiny compressed hair-like fibers, which can be seen with a magnifying glass, make up the structure of ' horn. Because of its unique protein formation, horn frays easily and has a tendency to split and crack during fabrication, making it difficult to work with. 

Horn smiths harvested, cleaned and fabricated horn into a variety of useful and ornamental objects such as dressing combs, hair ornaments, buttons, jewelry, decorative inlaid frames, trinket and snuffboxes. Because of Its beautiful pale translucent quality, they used horn extensively during the Edwardian Era for producing Art Nouveau accessories that depicted the dragon fly motif. 

Horn was a plentiful by-product of the meat and leather industries. It had been used for centuries n its raw state to make objects like powder horns and for fashioning common utilitarian items such as serving spoons and shoehorns. Oxen, steer and cow horn ranged in color from pale cream to light mottled gray. Buffalo horn, obtained from India, Thailand, and China, was dark brown. Domestic cattle horn vas plentiful and ranged in color tones from pale grayish green to streaked dark brown.

Manufacturers used raw cattle horn to make pressed rattans, umbrella and utensil handles, jewelry items and dressing combs. But Before these finished products could reach consumers, they had to first be fabricated. This process actually began with the meat industry.

Slaughterhouses had a surplus of raw cattle horn, which they stockpiled into various sizes and colors. This they sold cheaply to manufacturing companies or merchants who were in the business of applying horn to fabricators. A representative from the fabricating company would carefully select horn for specialty items like ornamental hair combs. Some representatives traveled the world searching for fine horn. When color wasn’t a consideration, the horn went for making common utilitarian objects like utensil handles or buttons.

After sorting, fabricators prepared the raw horn for the first step in processing. Workers trimmed the ends away by means of sawing two cross cuts—the first called the "head" or "rootº cut and the second the "screw" or "tip" cut. They then gathered the tips  to make utensil handles and buttons and used the ragged edges of the head cut to produce fertilizer.

They then sent the trimmed horn to the "opening department" where they soaked it with water and heated it over an open fire until it became softened. Another method commonly employed by fabricators involved softening the trimmed horn in huge vats of hot water or oil.

Nevertheless, once sufficiently pliable, the horn was ready to be split open. In order to prevent waste and in an attempt to end up with a rectangular piece of material, workers made an elongated, spiral cut beginning from the widest part of the horn up through the narrow section. After slitting, they forced the  horn open using tongs, and then placed it between screw plates to flattened it.

Fabricators often performed special finishing techniques on raw horn to change its appearance. They frequently clarified and sometimes stained it. The clarifying process involved squeezing the cleaned and flattened material between heated and oiled iron plates under tremendous pressure until it became translucent. Lantern makers used clarified horn, which had a slight greenish hue, as a "glaze" instead of glass in lanterns throughout the 18º and 19" centuries. Another use for ultra thin, translucent sheets of horn was to layer them between the pages of important documents in order to protect them from damage caused by bleeding inks. But the most important application of clarified horn was in the production of fancy ornamental hair combs.

Horn smiths stained clarified horn to resemble expensive tortoiseshell by first exposing it to diluted nitric acid which turned it a pale yellow. Once they achieved the desired amber color, they sprinkled and streaked the horn with a mixture of caustic soda, litharge, or lead monoxide, and dragon's blood, a colored resin derived from the rattan palm. This solution reacted with the nitric acid in the treated horn and turned the affected areas orange. The end result was a mottled imitation of tortoiseshell in mellow shades of amber and orange. Records show that in the late 1880s the comb factory of Stewart & Company of  Aberdeen, Scotland, used 3.5 million horns to only 600 pounds of authentic tortoiseshell per year.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Advertising of the Past" in the 2023 Spring Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Collectibles for Beer Lovers

 

QUESTION: Along with enjoying a variety of beers, I've also started collecting beer-related items. So far, I've collected mostly small items—bottle openers, coasters, glasses, and a variety of cans from various breweries. But there are so many things out there, I'm not sure what to do next. Can you help me get some direction to my collecting?

ANSWER: Collecting beer-related memorabilia is one of the most popular pastimes. But because the number of items varies greatly, collecting beer-related items can be daunting. 

The Chinese have been brewing beer for over 5,000 years. The Greeks and Romans revered it as a healthy beverage. But during the Middle Ages in Europe beer drinking was popular because beer was cleaner than the water.

Beer has been a part of American culture since the first Virginia colonists began brewing ale from corn in 1587. Adrian Block & Hans Christiansen's brewhouse at the southern tip of New Amsterdam, now Manhattan, was the first brewery established in the New World. 

In 1935, the G. Kreuger Brewing Company of Newark, New Jersey, became the first brewery to sell beer in steel cans. That year, only about 25 percent of all beer sold was packaged in bottles and cans. Breweries sold the rest in kegs.

Breweries have always been competitive with each other. To beat the competition, they used everything from distinctive bottle labels, foam scrapers, serving trays, brightly colored cans„ neon signs, tip trays, cups, T-shirts, hats, and countless other items so consumers would remember one brand over another.

Today, the market for vintage brewery collectibles is hot. But there are so many different items. Key categories include beer cans, beer steins, beer trays, beer signs, beer bottle labels, and bottle openers, plus more unusual items such as tap knobs and bar statues. Many collectors also focus on specific brands.

Beer collectibles consist mainly of bottles, cans, and advertising. Advertising comes on coasters, matchbooks, shirts, beer tap knobs and handles, statuettes, labels, and signs.

One of the most popular beer-related collectibles is beer glasses. They include everything from early hand-blown glassware to modern pint glasses covered in  advertising. In the 18th century, people drank beer in glass goblets at meals. Early stemware designed for beer often bore engraved hops-and-barley motifs.

The glass cups and mugs of the 18th century were simple and smaller compared to today’s versions, as the ale was much stronger than modern beer. Beer mugs were generally made in a cylinder or barrel shape with a handle and no foot. Because they were manufactured in glasshouses that produced bottles and windows, early American mugs were almost always made from colored glass.

In the 1820s, the development of a glass-pressing technique by John P. Bakewell allowed glassware patterns to be mass produced, quickly diversifying the shapes and styles of beer glasses. Though glass manufacturers found it difficult to blow even the simplest-looking tumblers with smooth sides and no foot by hand, pressed glass molds made this form commonplace.

During the 1880s, as breweries expanded and pasteurization allowed them to send products longer distances, beer-glass advertising became popular. A few of these early advertising glasses used color-embossed logos, but most relied on an acid-etching silkscreen process. 

And since  the U.S. has never instituted legal restrictions on beer serving size, American bars have used a variety of serving glasses, including tall pilsner glasses, with a slightly indented waist near the base and the goblet or tulip-shaped glass mounted on a short, sturdy stem.

Though people considered these objects "throwaways" in their day, collectors worldwide now vigorously pursue them. Prices for these collectibles vary widely, so focusing a collection is important from the start. To begin, you might build on what you already have or start in a new direction of interest. It's easy to start small, with something inexpensive like coasters. Serving trays, signs, a cans produced after Prohibition are all good places to start.

So what determines pricing for brewery collectibles? As with other antiques and collectibles, it's condition, condition, condition," since most brewery collectibles have been used. Pristine examples can command high prices, and they can be difficult to find. While rarity is important, for collectibles where multiple examples exist, condition rules.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Advertising of the Past" in the 2023 Spring Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.