The Bluebird of Happiness

QUESTION: Some time ago, I purchased six dinner plates, each with a large bluebird design on it, from a church sale. I love the bold design on these plates and have yet to see any others like them. On the back is the mark of the Buffalo Pottery. I thought they only made restaurant china. What can you tell me about my plates.

ANSWER: What you bought is commonly known as bluebird chinaware. The large, bold bluebird on your plates is one of over 50 different variations made by as many potteries. And while Buffalo Pottery did make a lot of restaurant china, they also made some for home use.

Bluebird china was everyday dinnerware. It was mostly made in America, beginning in the late 19th century. It featured  a decal of a bluebird, often with flowers or other designs incorporated into it.  Potteries made this china to be functional, and being so, it often broke from daily use. In many cases, started  out as a grocery store premium, perhaps a free gift received after collecting the required number of stamps. People could also buy complete sets from the Montgomery Ward Catalog and from Sears Roebuck & Co.

By the mid-1920s, bluebird china was available everywhere. But its popularity didn’t last long since by the end of the decade, manufacturers had begun phasing it out. By 1930, it had all but disappeared.

While many Ohio potteries, especially those in the vicinity of East Liverpool, made bluebird china, collectors prefer that made by the Homer Laughlin China Company. The pottery most often decorated its Empress dinnerware, which it introduced in 1914, with bluebirds. The company also decorated some of its other dinnerware shapes with bluebird decals, include Cable, Hudson, Kwaker, Newell, Republic, Riviera, and Tea Rose.

Homer Laughlin usually used a design showing two or three chubby bluebirds surrounded by differing shades of pink flowering apple blossom branches. Other potteries also produced china with the same motif which seemed strange. As it turns out, Ohio Valley potteries all bought their decals from the same company, Meyercord Decal, in Chicago.

Other potteries outside of Ohio also made their own versions of bluebird china. The most important of these was the Buffalo Pottery of New York. Many collectors seek out pieces by Homer Laughlin with decals showing bluebirds in flight that the company used on its wares. The bluebirds found on Buffalo Pottery wares appear to fly in flocks across the surface of each piece. Buffalo also sold bluebird dishes to restaurants.

The Larkin Soap Company first introduced a butter tub with a drainer and pitchers, both sporting bluebird designs, as a premium in its 1918-1919 catalog. Larkin’s catalogs from 1919 to 1922 featured a bluebird tea set consisting of tea plates, cups and saucers, sugar and creamer. Larkin also offered special pieces, like a baby dish, that could be specially ordered.

Another bluebird variation popular with collectors is the Flying Blue Bird pattern produced by Knowles, Taylor & Knowles of East Liverpool, Ohio. While the bluebird decals used by Homer Laughlin depict a small, pale blue, plump bird, KT&K's bluebird decals show large, bold birds in rich dark blues that seem to be circling around the china's outer edges. KT&K put their bluebird decal on pottery from their white Nina line, making the bluebirds stand out even more.

In order to compete with American bluebird china makers, European potteries began adhering bluebird decals to their dinnerware. This was odd since bluebirds aren't native to Europe.

There are many variations of the bluebird designs. D.E. McNicol Pottery, also of East Liverpool, made calendar plates with a finer, stylized bluebird floating between each month's calendar page on the plate's rim. The Edward J. Owen China Co. of Minerva, Ohio, often used a decal showing one or two bluebirds in flight among flowering rose branches.

As far as the value of bluebird china, shape doesn't seem to enter into it. Plates are common and sell for around $35 while rare large pitchers sell for lots more. Collectors especially seek the larger pitchers. A 6 3/4 inch water pitcher, made by the Buffalo Pottery, can sell for as high as $200.

And finding items in good condition is also a challenge since people used this dinnerware. Items like egg cups, salt and pepper shakers, and complete tea sets are particularly hard to find.

China decorated with bluebirds was especially popular because of what the birds represented. The 1920s was a time of optimism and the bluebird became synonymous with that. Bluebirds became a symbol of rebirth and renewal as well. Bluebirds and happiness seem to go together.

A Penny a Light

QUESTION: I love quirky old machines. Recently, I purchased a penny vending machine that I think held matches from an online auction. The seller couldn’t tell me much about it, but it’s in pretty good condition. It looks like it stood on a counter or table and stands 13½ inches tall. The machine seems to be made of cast white metal, but the slot that the penny drops through is made of wood. Unfortunately, the machine came with no label on it, so I have no idea who made it. An unusual feature is a cigar tip cutter which sits at the front of the base. Can you tell me who made this vending machine and how old it is. 

ANSWER: From what you described, I’d say you have a Sellem match vending machine, most likely produced around 1912 by the Northwestern Corporation of Chicago, which also produced a varied line of gumball machines.

Northwestern released 70 different machines under the Sellem name, starting in 1911. In addition to the Sellem match vending machine, the company also produced stamp vending machines and another type called Penny Matches.

The Sellem line was the deluxe model of the Northwestern match vendor line. The top, front and base are all made in the beautiful Art Nouveau style from cast iron, not white metal as you supposed. Two dolphins decorate the front of this machine. The Sellem was the firm’s  only model to have a cigar cutter and matchbox holder, both of which enticed customers to the machine and reminded them to buy a box of matches.

The Sellem came in two models. The A model had frames attached to the machine's sides and top that contained advertising panels and the more common B model, which seems to be what you have. The company also made a third version for a private match company, called The Scup. The Sellem dispensed small cardboard boxes of matches. The front of the machine had a holder that would hold the last box dispensed. These machines originally came in white, green or antique silver, and sometimes had brass-colored accents. 

Back in 1912, you would have most likely found your machine sitting on a table in the smoking lounge of a fine hotel. It was the custom of gentlemen at the time to smoke cigars after dinner. When a gentleman inserted a penny, it would drop through the wooden piece and allow the push bar to go back and forth. The machine also had a removable match loading compartment which often is missing on ones appearing for sale today. The cigar tip cutter was an added feature that enabled smokers to prepare their cigar before lighting.

Sellem vending machines sell for between $300 and $400. However, a fine one sold at auction for $960, but that’s rare.

Bent Into Shape

QUESTION: I recently purchased two bentwood chairs at an antique shop in a nearby town. Both have woven cane seats and the number “14" pressed into the wood under the rim of the seat. I bought them to use in my kitchen. The cane is in good condition and the chairs are stained a dark brown. Can you tell me anything about these chairs—who made them and how old are they?

ANSWER: You made a great purchase. Your chairs are commonly known as “bistro” chairs, and while most people think they date from the early 20th century, they actually date back to the mid 19th century.

Michael Thonet (pronounced “toe-net”), a clever and creative cabinetmaker from Boppard am Rhein, Germany, invented the process for bending wood and as a result created the first pieces of bentwood furniture. He originally made your chairs in 1859, however, his company, which is still in existence, made over 50 million by 1930. So yours could date from the early 20th century.

Thonet, the son of master tanner Franz Anton Thonet, started out as a carpenter's apprentice in 1811. Eight years later, he opened his own shop. In the beginning, he carved his pieces from European beechwood.

In the 1830s, Thonet began trying to make furniture out of glued and bent wooden slats. His first success was the Bopparder Schichtholzstuhl, or Boppard layerwood chair, in 1836. The following year, he purchased the Michelsmühle, the glue factory that made the glue that he used. However, he failed to obtain the patent for his new process in Germany and England in 1940, so he tried again in France and Russia the next year, but again failed.

The steam engine appeared on the scene around the time that Thonet's was experimenting with his bending process. He discovered that he could bend light, strong wood into curved, graceful shapes by forming the wood in hot steam. This enabled him to design elegant, lightweight, durable and comfortable furniture, which appealed strongly to style trend at the time. His pieces were a complete departure from the heavy, carved designs of the past.

At the Koblenz trade fair of 1841, Thonet met Prince Klemens Wenzel von Metternich, who was enthusiastic about Thonet's furniture and invited him to his Vienna court. During 1842, Thonet presented his furniture—particularly his chairs—to the Imperial Family. On July 16 1842: Metternich granted Thonet the right "to bend any type of wood, even the most brittle: into the desired forms and curves by chemical and mechanical means." The Prince granted him a second, nonrenewable 13-year patent on July 10, 1856 "for manufacturing chairs and table legs of bent wood, the curvature of which is effected through the agency of steam or boiling liquids.”

When his first factory in Boppard establishment got into financial trouble, he sold it and moved his family to Vienna, where in 1849, he opened a new factory called the Gebrüder Thonet. In 1850, he produced his Number 1 chair, which he intended to sell to café owners. 

He received a bronze medal for his Vienna bentwood chairs at the London World's Fair in 1851, at which he received international recognition. At the next World's Fair in Paris in 1855, he received the silver medal for his new and improved bentwood chair design.   In 1856, he opened a new factory in Korycany, Moravia because of the country’s ample supply of beechwood.

By 1859, he developed his most famous chair—the Number 14, known as Konsumstuhl No. 14 or coffeehouse chair No.14—for which he finally received a gold medal at the 1867 Paris World's Fair.

Thonet produced his No. 14 chair using six pieces of steam-bent wood, ten screws, and two nuts. He made the wooden parts by heating beechwood slats to 212 °F, pressing them into curved cast-iron molds, then drying them at 158 °F for 20 hours. The chairs could be mass-produced by unskilled workers and disassembled to save space during transportation—an idea used today by the Swedish company IKEA to flat-pack its furniture.

The firm’s later chairs used eight pieces of wood and also had two diagonal braces between the seat and back to strengthen that particular joint.

Today, a pair of these icon chairs with a table is selling on eBay for nearly $1,000.

An Antique That Lasts a Lifetime

QUESTION: I love to cook. And I love to cook in my cast-iron skillet. I’ve had this skillet for nearly 50 years and it never fails me. I bought it at a second-hand store to use for camping, but I liked it so much, I began using to cook with in my kitchen. The name stamped into the bottom is Griswold. I’ve seen others like it at flea markets and would like to know more about it. What can you tell me about the company?

ANSWER: While other antiques may last as long or longer as a cast-iron skillet, few can be used regularly and still retain their value. Your skillet is a real classic. And if you take care of it and use it regularly, it should last another 50 years.

Cast-iron skillets have been around since 1642. The first one made, a small, three-legged covered pot that held one quart came from a foundry in Saugus, Massachusetts. The thing weighed 2 1/4 pounds, so the lady of the house probably developed some pretty heft biceps. From then until the early 19th century, cast-iron cookware had great value, so people took care of it and guarded it as a prized possession. 

However, cookware made of it was brittle, prone to rust, grainy, unfinished and difficult, if not impossible, to repair if cracked. It was also "reactive." Acidic foods, such as vinegar, tomatoes, and citrus, re-acted with the iron and changed the flavor and color of whatever the cook was preparing. The solution seemed to be to season the it. A non-stick surface wasn’t natural to cast iron. It had to be created by seasoning or curing the piece. A cook would repeatedly coat a pot’s inside surface with animal fat and place the utensil in a 250- to 300-degree oven for two to three hours. After wiping away any excess fat, he or she would lightly rinse it with hot water, using no soap, then thoroughly dry and store it in a dry place. Many people never ever put a used piece under water. Today, cast-iron cookware comes pre-seasoned.

By the 1840s, open hearth cooking had been replaced by the cast-iron stove which enclosed the fire in iron and shielded the cook from an open flame. Cooks placed their pots directly on solid iron plates—not open grates—that formed the top of the stove. In later models, foundries  cut deep holes into the top and made the iron plates removable. With this innovation, a pot could be placed into the hole for a snug fit and was as close as possible to the flame. Stove manufacturers found it to their advantage to add a line of cast-iron cookware that perfectly fit the removable iron plates or “eyes” of their stoves.

By the mid-19th-century, foundries that made cast-iron stoves also made cast-iron cookware— also called hollowware. The Selden brothers, John and Samuel, operated a foundry in Erie, Pennsylvania, where they manufactured butt hinges and other household hardware. In 1863, they added cast-iron cookware to their expanding product line. Because of the areas widely known foundries, they marked their earliest skillets, muffin pans, and Dutch ovens with one word, “Erie.”

In 1868, Matthew Griswold joined the Selden brothers. Unlike his partners, Griswold believed in patenting the products developed in the foundry. He patented just about everything. The name "Selden and Griswold" appeared on many cookware items shortly after 1868. At Samuel's death in 1882, Griswold bought out the remaining family members and changed the name of the company to his own. He cleverly kept "Erie” on some of Selden's most popular pieces, but added “Griswold” above it.

The Griswold Manufacturing. Company and its predecessors produced superior cookware in an industry dominated by inferior, low-quality goods. In the late 19th century, cast iron was often made by prisoners. The top of the Griswold line was "extra finish ware"—cooking utensils with a polished exterior, a milled interior, and top edges so tight that the connection between the pan and the lid was a waterproof joint that even the thinnest knife couldn’t penetrate.

Women noticed the difference. Unlike the products made by its competitors, pieces made by Griswold were thin and lightweight. After centuries of super heavy pots and pans, Griswold overcame cast iron's weight problem.

Women also noticed the company's distinctive trademark. Griswold featured a cross, a sign of quality, on most of its products. Over the firm’s long history from 1850 to 1957, Griswold Manufacturing Company produced over 180 cast-iron items. Included in the "non-cookware category" were cast-iron ashtrays, burglar alarms, fire. sets, gas heaters, sadirons, mailboxes, pokers, display racks, shovels, spittoons, sun dials and tobacco cutters. They introduced gas stoves in 1891, kerosene heaters in 1895, and parlor stoves in 1900.

Today, the cast-iron skillet dominates most Griswold collections and is nearly always the first piece a new collector buys. Good luck with your skillet and keep cooking.

Beauty in the Glass

QUESTION: I have always loved paperweights. I don’t mean the kind with advertising on them but the ones with floral designs that seem embedded in them. I started buying them here and there, but I want to give some direction to my collection. How and when did these beauties originate? And can you give me some suggestions on building a collection?

ANSWER: From the beginning, people treated paperweights like works of art and not just as something to hold down paper. Early collectors included Queen Victoria, Oscar Wilde, Truman Capote, Eva Peron and King Farouk of Egypt. Today, there are over 20,000 paperweight collectors worldwide. But not all of them are famous celebrities. Some of them are ordinary people like you.

So what got them into collecting paperweights? People purchase paperweights for several reasons. Some just enjoy their beauty and may buy several as accent pieces for their home. Others purchase them because they remind them of one that a loved one had when they were a child. And still others buy them to collect as an object of beauty and value. And though collectors today still purchase paperweights in antique shops and at auctions, many more use the Internet as their primary source.

To begin with, the Paperweight Collectors Association divides paperweights into several periods: Classic, from 1840 to 1880, Folk Art and Advertising, from the 1880s to World War II, and Contemporary, after World War II.

While several hundred glass factories operated in France during the Classic period, the factories of Baccarat, Clichy, and St. Louis produced the highest quality paperweights. In the latter half of the 19th century, British glassmakers George Bacchus and Sons, Walsh-Walsh and Islington Glass Works also made paperweights. Although they’re considered to be of lesser quality, the factories in Belgium, Bohemia, Germany and Venice all made paperweights during this time.

Venetians glassblowers on the island of Murano made some of the earliest paperweights in the 1840s. They gathered scraps of leftover glass, as well as chunks of aventurine quartz, which they picked up from the floor with a ball of hot glass at the end of their blowpipe. They then covered this with an additional layer of clear glass and fashioned the mass into a smooth cylinder. The glass was of poor quality and the scraps it contained looked like a jumble.

Around the same time in Bohemia, in today’s Czech Republic, glassworkers improved on the Venetians’ techniques. Instead of a jumble, the Bohemians used the scraps to produce millefiori (multiple floral) effects, in which they organized the ends of the pieces of scrap glass with their cross sections facing out so that viewers could see patterns in the paperweight.

To this, the Bohemians added the artistry of the French, who really brought the art of the paperweight into full flower—no pun intended. In fact, it was these floral paperweights from the mid 19th-century that began to attract collectors. The flowers seem to be suspended within these paperweights and were like nothing else produced at the time.

Baccarat, the most famous paperweight maker, also used millefiori, whose cross-sections revealed stars, spirals, and shamrocks. The company produced both "plain" millefiori paperweights and those organized in concentric circles, with their ends interwoven like garlands.

The firm also produced mushrooms, in which a bundle of glass canes seems to sprout like a mushroom from within the weight, and carpets, whose wall-to-wall patterns look like those in antique Persian rugs.

The French added three-dimensional flowers encased in glass. At Baccarat, flower choices included pansies, primroses, wheatflowers, clematis, buttercups, and, of course, roses. The artisans also froze fruits, such as strawberries and pears, in glass.

Numerous other paperweight makers, such as Clichy, whose trademark rose appears in some 30 percent of all the paperweights produced by the company, and St. Louis, whose crown paperweights were its trademark, existed in France during the 19th century.

In England, the George Bacchus & Sons Glass Company, located in Birmingham, made paperweights with interiors that resembled stars and ruffles. Collectors hold its concentric paperweights in high regard, as well as those whose interiors appear to be blanketed with drifts of snow.

The New England Glass Company, the forerunner of the Libbey Glass Company, produced the first American paperweight for the Great Exhibition in London. This pictorial weight, dated 1851, featured Victoria and Albert. Both the New England Glass Company and the Boston and Sandwich Glass Works were key paperweight producers from the 1860s until they closed in 1888.

The 1920s saw a boom in paperweight technologies in the Czech Republic, where faceted, flower-filled paperweights had become popular. Baccarat revived its millefiori output shortly after World War II.

Today, the tradition continues. Because the techniques used in creating paperweights have been unaffected by technology, collectors are drawn to them today more than ever.

Building a paperweight collection is all a matter of personal taste. Buy what you like, old or newer. Some people collect only milleflori designs while others collect only paperweights made by one company or within a certain time period. One thing is for certain, paperweights make a great collectible for people who live in apartments or condos as they don’t take up much room.

Music From the Past That Captures Your Heart

QUESTION: I’m now the proud owner of a beautiful 19th-century music box that has been handed down for generations ever since my great-grandfather owned it. It’s a real beauty and still plays. I can tell it needs service, but I have no idea where to take it. The type of box I have has a metal cylinder inside with little pins stuck into it. As it turns, the mechanism plucks the pins to produce the music. I also have several different cylinders for it. On the inside of the lid is a label that says “Made by Nicole Freres of Geneva, Switzerland.” What can you tell me about my music box? Also, can you tell me where I should take it to be serviced?

ANSWER: You have a unique cylinder music box made by the prestigious Geneva company of Nicole Freres in 1862. This particular music box reproduces the sound of a piano forte using a two-comb movement, combined with a two-per-turn format on its larger cylinder that enables it to play a dozen operatic tunes with elegant sound. The musical mechanism sits in a beautiful rosewood case with intricate inlays.

When people think of mechanical music, most think of music boxes. The early ones like the one you have appeared at the beginning of the 19th century and lasted until about the time of World War I. However, people tend to lump all types of mechanical music devices into the general music box category. What you have is far beyond the type used in jewelry boxes and other novelties. It’s the forerunner of the phonograph and of all the other music players on the market today.

Mechanical music is a live performance of music, played by a machine, without any human intervention, except for winding it up, plugging it in, or turning it off. The invention of mechanical music devices allowed people to enjoy music before electricity, when the only option was to attend a live performance or to create their own music.

Mechanical music goes back to the 14th century, with the invention of the carillon, which automatically played music on tuned bells actuated by hammers on levers by way of a pinned drum. Primarily used in churches to play hymns, the drum could be programmed to play different song selections by moving the pins from one location to another.

The mechanical pipe organ appeared in the 15th century. This instrument, through valves actuated by pins on the drum, allowed selected pipes to play organ music mechanically. During the 16th century, the mechanical pipe organ gained widespread popularity in Europe, and soon expanded beyond churches and public buildings. It became a must-have novelty for aristocratic society. Eventually, cabinetmakers built   desks and cabinets to encase carillons or pipe organs. These mechanical devices became so trendy for the well-to-do that heeled that famous musicians of the day, including Beethoven, Handel and Mozart, actually wrote pieces specifically for them.

It wasn’t until the late 18th century that mechanical music experienced any change. In 1796, Antoine Favre, a Geneva clockmaker, patented a device to make carillons play without bells or hammers. His invention paved the way for cylinder boxes, which had a comb of hard steel with a series of teeth or tiny  tuning forks, which graduated from long and thick to short and thin. Pins placed on a rotating cylinder, which when moved laterally, plucked these teeth and produced different tunes.

Clockmakers began constructing cylinder boxes in the late 18th century and continued making them well into the late 19th century. Over time, the mechanical music industry saw many advances in technology. Eventually, they developed over 20 different musical effects by changing the size, placement, tuning, and arrangement of the pins on the cylinder. Most cylinder boxes reproduce music of either a mandolin or a piano forte. The first produces a softer more folksy sound while the second produces a louder bolder sound simulating an early piano. Most mandolin cylinder music boxes played only 4 to 6 tunes while the piano forte version played 12.

And although the cylinder music box revolutionized the mechanical music industry, it had its limitations.  While interchangeable cylinders allowed for the playing of different tunes, it was a cumbersome process to change them. In the late 1880s, all that changed with the introduction in Germany of the disc musical box. This revolutionized the industry because instead of the slow and delicate process of inserting pins in cylinders, the discs could be stamped out by machine. Also, it was easy for people to change the discs on the machines, making it possible for them to hear the latest tunes.

While the 19th century also saw the development of many other forms of mechanical music, none could hold their own against the evolution of the phonographic record player and by the 1920s, interest in music boxes had subsided.

What makes mechanical music devices unique is their blend of art, history, music, and mechanics. Although they can’t be compared to other collectibles, condition, rarity and market demand still affect the price. They also take a good deal of maintenance to keep them running well and, thus, enabling them to hold their value. Only a professional music box restoration expert can make sure that a box is kept in good condition. However, finding one may be a challenge but worth it since a cylinder box in excellent condition can sell for four figures.

The First Home Improvement Companion

QUESTION: At a community book sale recently, I was going through a box of old magazines and discovered a copy of The Craftsman, a magazine from the early 1900s. It looked interesting, so I put it with the rest of the items I intended to purchase and bought it. As I was going through the books and such I bought a few days later, I noticed that the publisher was Gustav Stickley. Is this the same person who made Mission furniture? Also, what can you tell me about The Craftsman?

ANSWER: It is indeed the one and the same person. And The Craftsman magazine was Stickley’s pride and joy and the first of its kind to discuss home improvement and design.

Gustav Stickley was one of the most important figures in the Arts and Crafts Movement in the United States. He was a furniture maker who became a leader in the philosophy of the Arts and Crafts Movement as well as in the production of objects suitable for use that followed its principles. And although he wasn’t a craftsman himself, he successfully inspired craftsmen to carry out his concepts.

Also, he knew the value of publicity in selling his products and his ideas. He used his magazine, entitled The Craftsman, which he edited and published during the 15 years he was active in the Movement, as his main means of promotion.  At its peak, The Craftsman reached 60,000 subscribers and featured articles and essays on Stickley's many interests and concerns.

Gustav Stickley often referred to himself as "the craftsman" and used the term "craftsman" in many ways. The furniture he sold was Craftsman—not "mission"—furniture, his version of the Arts and Crafts movement was the Craftsman Movement, and his monthly magazine was The Craftsman.

He published the first issue of his magazine in October 1901 in  Eastwood, New.York, where he had located his furniture factory. Later he moved The Craftsman to Syracuse and finally to New York City. The premier issue emphasized the work and ideas of William Morris through an article entitled “William Morris, Some Thoughts Upon His Life.”

Irene Sargent, professor of art history at the University of Syracuse, served as Stickley's principal editor. She wrote many of the articles in the magazine’s early years. A very persuasive person, Stickley was able to obtain contributions from such notables as Louis Sullivan, Jacob Riis, Leopold Stokowski, John Burroughs, and Jane Addams. They covered a wide variety of subject matter, from architecture to art and nature, as well as the concepts of social reform prevalent at the time.

Though he was an idealist, Gustav Stickley had to eat. The Craftsman offered him lots of advertising  space for his growing furniture business. Thirteen pictures of furniture made by Stickley's company, United Crafts, included a round table, an armchair, and a settle, followed an article entitled “An Argument for Simplicity in Household Furnishings” in the first issue. The Craftsman also showed readers how to use the furniture in its many illustrations of room settings. Over the years, Stickley added metalwork, lighting fixtures, textiles and other items to his product line, and also to The Craftsman.

He often commented on the Craftsman ideal. Stickley believed an ideal kind of life encompassed beauty, economy, reason, comfort, and progress. It didn’t satisfy him to merely achieve this ideal in furniture but he felt that consumers must also have the right kind of houses in which to place the furniture. He no sooner began  designing Craftsman houses than he realized that people wanted Craftsman fabrics and accessories of all kinds. In other words, he believed in the concept of total interior design.

While early issues had somewhat smaller covers, ones beginning in 1913 had larger ones measuring 8 by 11 inches. Stickley printed all of them on brown or tan stock and usually featured a wood block decoration in two or more colors, initialed by the artist. Each issue consisted of 100-140 white and glossy pages, and later ones had as many as 175 pages.

Plans for Craftsman houses, some small and simple, others more elaborate, attributed to Stickley as the architect, although he had no architectural training. People built many of these houses using Stickley’s plans.  The Craftsman also featured short fiction and poetry, as well as the work of famous photographers.

Besides articles about Stickley’s products, The Craftsman often included ones about other makers of Arts and Crafts objects. For example, a 1903 article, “An Art Industry of the Bayous: The Pottery of Newcomb College” by Irene Sargent, documents the early history of Newcomb pottery. Photographs of the pottery school and examples of early high glaze pieces accompanied it. There were also essays devoted to philosophical, political and social commentary, usually promoting the simple life

The magazine also offered all kinds of practical and how-to advice, from gardening to leather tooling to embroidery to purchasing household appliances.

It also included advertisements by manufacturers whose products are now greatly valued by collectors, for example, Rookwood pottery, Heisey glassware, Handel lamps, and Homer Laughlin china.

Unfortunately, Stickley overextended himself and in 1915 had to file for bankruptcy. But The Craftsman was the first periodical to emphasize the importance of harmony in a home’s interior, harmony which was to be created through attention paid to walls, floors, windows, textiles, small objects and furniture.

Ashes to China, Bones to Beauty

QUESTION: I have a beautiful vase that’s been in my family for years. It seems to be made of delicate porcelain and is decorated with a fish-net type of design that’s raised off its surface. The vase has a green circle with a crown on top and Lotus Ware printed around the outside. Inside are the initials K.T.K. Co. with a crescent and star. Can you tell me more about this piece?

ANSWER: What you have is a piece of Lotus Ware, a short-lived but highly prized type of bone china made by Knowles, Taylor & Knowles of East Liverpool, Ohio. Produced for only a few years in the 1890s, many collectors consider it to be the finest bone china ever made in the United States. The term "Lotus" comes from the translucent pearliness of the glaze, which Isaac Knowles had once observed resembled the glowing sheen of a lotus blossom.

Lotus Ware was a dream of Isaac Knowles. His firm, founded in the 1850s and lasting until the 1930s, consisted of Isaac Knowles, Col. John Taylor, his son-in-law, and his son, Homer Knowles. Isaac Knowles wanted to produce fine bone china that would rival the best imported from England. He had been a longtime producer of Rockingham pottery, yellow Queensware, and ceramic canning jars. So in 1870 he decided it was time for a change and brought his son and son-in-law into the firm. Within 10 years, Knowles, Taylor, & Knowles was not only the largest pottery in East Liverpool, but did all its decorating in-house. .

What is bone china? Literally, it’s fine china ware made from bone ash, which results from burning animal bones that are crushed into a fine white powder. English porcelain makers discovered this combination of ingredients about 1750. Strong hard porcelain chips fairly easily and unless specially treated, is usually tinged with blue or gray. Bone china, on the other hand, is strong, doesn’t chip easily and has an ivory-white appearance, perfect for fine china. The bone ash greatly increases the translucence and whiteness of the porcelain. And though it costs less to make it than porcelain, makers charge a premium for it.

Fortunately, East Liverpool had a stockyard that could supply the needed bones to make the ash. This probably had a lot to do with the decision of Knowles, Taylor, and Knowles to make bone china. And even though the company did well, Isaac Knowles had a vision to create something rare and beautiful—art in porcelain.

Trucks hauled in large quantities of bones from the slaughterhouses and dumped into them into large vats to boil away any meat. Workers dried the remains in kilns, which burned the bones to a powdery ash. They then mixed the powdery ash and the porcelain formula together to form the porcelain composition.

After first casting bases, bowls and other items in the casting shop, workers took the bisque ware to the kilns to be fired for the first time.

After the firing took place, workers transferred the pieces to the decorating shop to be decorated partially or totally by hand. There skilled artists gilded the ware or applied hand-painted designs. Once decorated, workers transported the ware to the kiln room to be fired again to make the design permanent. After cooling, they finally transferred the pieces to the warehouse for shipment.

Knowles employed a type of decorating unique to Lotus Ware which placed flowers, leaves, stems and filigree—open works of elaborate designs—on the pieces of china. The person responsible for this was Heinrich Schmidt, a German artist who had previously worked at the Meissen factory in German. He was a bit of an eccentric and saw himself as an artist, keeping the recipe to make the clay slip he used in his head. He also insisted on working in a room without windows in order to foil pottery industry spies.

Schmidt originated his own floral decorations and open work designs. When he was ready to put his clay flowers on a Lotus bowl, he would first center the bowl on a whirler and then trace out his particular pattern on the bowl with a undulating movement, much like one would trace an imaginary lead pencil around the bowl. His instruments were a rubber bag and copper tube similar to that used in cake decorating. He produced the stems, leaves and flowers of his patterns with remarkable skill, using a small piece of plaster of Paris, a little bit thicker than a lead pencil and shaped like a petal, to give a more realistic impression to his flowers. This was always done after the petals had reached the proper hardness. He sometimes indented the stems of his floral designs, and attached leaves to them, using a sharp tool to give a roughened and more natural effect.

Schmidt first worked out his patterns on a small plaster mold. He would do a quick penciling of his design on the mold and then etch it out slowly with his cornucopia bag. These minute indentations served to support the moist clay while the clay was drying. When the drying process was complete, the open work would be removed from the mold by a slight jolt on the plaster form fro the hand.

He would next take the open work designs into his hand and apply a little fresh slip to its outer edges. Then he would attach the design to the vase or bowl he was working on. If too much pressure was applied, the pattern would be crushed and rendered useless.

Another method Schmidt used, called `jeweling," featured a jewel and swag type decorative chain placed on the item of Lotus Ware making it appear as if the jewel and chain had been hung on the piece. The "fishnet" design was also commonly used on many pieces of Lotus Ware along with the molded patterns of shells and lily pads.

The bodies of Lotus Ware pieces are translucent and fragile with a gloss or matt finish in white or in a light and deep olive green color Most of the Lotus Ware decorating reflects the Art Nouveau influence of the era, with its flowing styles and applied decorations.

Discovering who decorated a piece of Lotus Ware has always been a challenge, even for the most knowledgeable collector. Unless a piece has been signed and the artist is known to have worked at the firm at that time of the decorating and signing, it’s mostly speculation as to who did the decorating. Since the company paid artists by the piece and not by the hour, it’s probably certain that they didn’t mark the pieces they decorated.

Only two marks are known to exist on Lotus Ware. The first shows a circle with a crown on top and the words “Lotus Ware” printed around the outside. The initials K.T.K. Co. with a crescent and star are inside the circle. The second is similar but with the words Knowles, Taylor & Knowles spelled out.

Today, only about 5,000 pieces of Lotus Ware survive.

First and Foremost

QUESTION: My grandfather left me a first edition of Robert Louis Stevenson's Treasure Island, illustrated by N.C. Wyeth. I’m just an average reader and not a book collector. What makes a first edition special and is it worth anything?

ANSWER: First editions of books are special because they’re the first printing. If they’re signed by the author, they’re worth even more. But not all old books are first editions and not all first editions are old books.

Books have had a tremendous influence on shaping our civilization and culture for over a thousand years. People love to hold and own an original or older copy of a classic and feel a part of its influence by preserving it. And apart from the content, many books are antique objects as beautiful as furniture or pottery or any other collectible. Such is the case with your grandfather’s book.

The quest for exploration and adventure Is what attracts collectors to old books— reading first-hand accounts of those that were there, plus the craft and art of older books is dramatically lacking from those of today. Antiquarian books, as rare books are called, remind people of how well the past has been preserved. They kept books for generations because they contained the kind of information or story that inspired their view of life. As they got older and settle into a life of reflection, the books that influenced them or their ancestors became objects they’d like to own.

Today, fewer people are collecting rare books. Instead, they’re focusing on modern ones, mainly first editions of literature—those printed after 1929. Modern book collectors believe their collections will gain in value, like any good investment, plus they enjoy having the first editions.

The exposure of collectors to the Internet and television shows like Antiques Roadshow has had an impact on the market, and that impact hasn’t always been positive. After watching the rising prices of the first edition market, people believe that antiquarian books are all about money. They’re not—antiquarian books are important objects of the past, like arrowheads, and should be collected in at effort to understand what and how people read in another time.

Important American writers, such as Ernest Hemingway, Walt Whitman, and Edgar Allen Poe have a strong collector base. Unfortunately, most of these authors have been heavily reprinted, and the beginning collector often assumes that old editions are first editions, when in almost every case they aren’t. Being old doesn’t necessarily make a book valuable.

Today’s book collectors lean heavily towards modern American first editions, such as The Great Gatsby, The Sun Also Rises, A Farewell to Arms, The Grapes of Wrath, To Kill a Mockingbird, and Catcher in the Rye—books they read in high school or college, which helped shaped how they think and who they are. Fine copies of these books in their original dust jackets fetch astronomical prices in today’s market. For instance, a first edition of The Great Gatsby went for $130,000 at auction, due largely to the personal connection that people feel for these classics. Books by Charles Dickens, Mark Twain, Zane Grey, and Jack London are popular, also. A first edition of To Kill a Mockingbird, which sold for around $1,000 in the 1990s, today commands between $10,000 and $15,000, especially after the announcement by the author of an upcoming second novel, the first in 40 years..

The same goes for beautifully illustrated books by Maxfield Parrish, Edmund Dulac, and N.C. Wyeth. 

A first edition of Charles Darwin's The Origin of the Species has doubled to about $50,000 in recent years. John Steinbeck's novels have been going up steeply, at least for The Grapes of Wrath, which has tripled to $6,000 in the past few years.

So why do first editions sell so briskly?. That’s easy to understand, since they’re well-identified and have only a few factors that affect their value, such as dust jacket condition and signatures of the author.

A book in a nicely-preserved jacket is worth many times that of one without a jacket. For example, a first edition of Gone With the Wind with a dust jacket is worth approximately five times more than a first edition without the jacket.

But how about the availability of old and antiquarian books? Are they still accessible? The availability of old and antique books has never been greater. The Internet overflows with old books, and for modern books there are multiple copies of collectible books. Unusual old books in fine condition suddenly become collectible, despite being overlooked by past generations. And while people continue to find old books in attics and at estate sales, the best discoveries usually can be found in antiquarian bookstores.

But while accessibility to rare books is increasing, their availability is decreasing. A book’s exposure to the elements and casualty—fire, smoke and water damage, rodent and pest damage, cannibalism and discard—adversely affect its availability. For instance, the Internet has improved access to rare books, but also to cannibals—those who extract the prints, maps and signatures from books to sell separately as ephemera.
Today, it’s virtually impossible to find an existing copy of Elliott's 1884 History of the Arizona Territory because the value of the individual illustrations far exceeds the value of the complete book. As a result, very few complete copies remain.

Spin, Spin, Spin

QUESTION: Several years ago, I purchased a small spinning wheel at a local antique show. The dealer said it had been made small for use by a child. While that seems like a good way to teach a little girl how to spin, I’ve never seen one so small. It stands less than two feet tall. Also the wheel doesn’t look like the usual kind and sits in a vertical position under the spinning mechanism. What can you tell me about my spinning wheel? Was it for a child’s use or maybe made as a sales sample?

ANSWER: Your spinning wheel was neither made for a child’s use or as a sales sample. It’s called a parlor spinning wheel and is one of four types of wheels made in the 18th and early 19th centuries for use by women in the home.

Spinning has been a vital part of everyday life all over the world for thousands of years. The Western spinning wheel has been around since about the 14th century, thus there are as many style of wheels as there are people who make them. But there are only two basic ways to spin, and all styles of wheels are variations on one of the two.

The first way to spin is called "quill" or"spindle" spinning. The mechanism is a simple system of pulleys attached to the wheel. The pulleys cause a long, sharp, metal spike, or "quill," to turn. Fibers are spun off the tip of the quill and then manually wound back onto it.

The second, more modern, way to spin is with a "spinning assembly" which consists of a "flyer" and "bobbin." The flyer is a U-shaped piece of wood with hooks running along both sides and a hole, called the orifice, at the bottom. The spinning assembly allows the spun fiber to wind onto the bobbin automatically.

There are four styles of spinning wheels. The first is the wood wheel, which has no treadle or foot pedal to turn the wheel. The user must work with it while standing, walking backward to twist the fibers and then forward again to wind the spun yarn onto the quill or spindle. For this reason, people call the wool wheel the walking wheel or the high wheel or great wheel because it stands 4 to 6 feet tall.

The second style of spinning wheel is the flax wheel, also called the Saxony wheel. This type is what most people think of when they picture a spinning wheel. It has a low slanted bench, a treadle to keep the wheel going, and a spinning`assembly. A Saxony  wheel also has some sort of distaff to hold the flax while the user spins it. The distaff could be a straight stick in a hole at the front of the bench, or it could be on its own frame so, you can swing it to the side. Very often the distaff has been lost over time, and the only clue that there was a distaff at one time is a hole in the bench.

The third type of spinning wheel is the castle wheel, which has all the same components of the Saxony—a small wheel, treadle and spinning assembly—but instead of being mounted on a slanted bench, the wheel and assembly sit in a vertical frame. Technically, this type can only be a castle wheel if the spinning assembly is mounted below the wheel, but most people now call any upright or vertical frame style a castle wheel. True castle wheels are relatively rare.

The last type of spinning wheel is the parlor wheel, an upright or vertical version of the Saxony. Though it may look like a castle wheel, only two vertical upright posts support the wheel instead of a rectangular frame. These wheels are also the smallest.

Besides the story that these dainty wheels were originally made for use by children, some antique dealers spin a yarn which says that immigrants brought this type over to America with them because they could only bring small items on the ships. And while both of these explanations for the parlor wheel's size seem plausible, neither is true.

The parlor wheel’s small size appealed to the Eastern and Central Europeans. There have been wheels dated well before immigration began which were just as compact as those made during and after the rush to America.

Truly antique versions of the parlor spinning wheel sell for nearly $500. But there are a lot of reproductions out there, and it’s often difficult to distinguish the authentic from the reproduction.

Carrying on the Tradition

QUESTION: I recently purchased a small wooden sculpture of a crane. It looks to be carved from an exotic wood, but I’m not sure what kind. It has a sleek, streamlined appearance, much like sculptures from the Art Deco Period of the 1920s and 1930s. Can you tell me anything about my sculpture—when and where it was made and perhaps who made it?

ANSWER: It looks to me as if you have a piece of Balinese wood carving. Your crane has the style and shows the fine workmanship of pieces from that part of Indonesia. Dating it is more of a challenge because much of the contemporary wood carving of Bali was heavily influenced by the style of Art Deco. And even more recent pieces have that look.

Wood carving, dating back 3,000 years, is the most popular medium for artistic expression in Indonesia, and the diversity of Indonesia's wood carvings is remarkable.

In the times of Bali's old feudal kingdoms, woodcarving served as temple decoration. Wood was also utilized in such everyday household features as carved beams, columns, doors for houses, and implements like musical instruments, tool handles, and bottle-stoppers. Carvers painted these carvings in bright colors, lacquer, or gold leaf and seldom left the wood raw.

There are two main types of Balinese woodcarving. The first is traditional carving in bas-relief tableaux and plaques, used mainly for decorating temple doors, walls and columns, plus small statues of deities and mythical heroes, designed for use in public buildings. The second type is contemporary woodcarving, featuring highly stylized human or animal figures, often grotesque, almost psychotic—expressing the Balinese fear of the supernatural and a strong, sensual feeling for nature.

One of Bali’s most noted wood carvers was Ida Bagus Nyana, who worked in the village of Mas. His son, Ida Bagus Tilem, carries on the tradition today.

Ida Bagus Njana created abstract sculptures of human beings and surrealistic knotty "natural" sculptures out of gnarly tree trunks. He used small incisions on the surface to indicate contours while the wavy grain of the wood contributing to the motion of the figure. He was also the original creator of the fat statues of toads, elephants, and sleeping women now on sale all over Bali.

Nyana allowed his son, Tilem, to develop his skills, unhindered, while teaching the boy to be patient. Gradually, Tilem developed his talent, carving tiny birds, animals, and traditional figures, despite battered hands from his first few attempts with his father’s razor-sharp chisels. He was able to sell his carvings to tourists and pay for his schooling.

Tilem decided to leave school and set up a studio at his home in Mas in 1958, where he sold his own work to help his family. He furnished wood and tools to local boys who couldn't afford them. Eventually, he had over 100 apprentices and 100 carvers working with him. He was chosen to represent Indonesia at the New York Worlds Fair in 1964 and has had numerous overseas exhibitions.

During the 1930s and 1940s Balinese wood carving underwent a transformation when the main art center shifted to Ubud and its surrounding villages. The 1930s brought an influx of tourists, and a dramatic change in the perspective of Balinese wood sculptors. Shops, street corners, hotel lobbies, marketplaces, the airport, and harbors suddenly blossomed with objets d'art   produced to sell. In contrast to the traditional polychrome, mythological religious carvings, more realistic statues of peasants toiling, nude girls bathing and deer grazing appeared, themes that found a very ready market among the tourists. All in natural polished woods.


Most Balinese wood carvers favor teak wood, though it has become increasingly expensive. Teak is one of the best woods because it is easily carved and is less susceptible to warping, splitting, insects and rot. Carvers will occasionally use mahogany and ebony, both of which are also very expensive. Besides the more exotic woods, carvers use jackfruit, a cheap, common wood, though it tends to warp and split, as well as tamarind, hibiscus, frangipani, and kayu jepun, and sawo, a beautiful dark red wood.

The texture of the grain determines the nature of the piece to be carved. Dark ebony, particularly pieces with striped grain, are best suited for vertical shapes or faces. Rarer are pieces made of unpolished ebony (sanded and brushed only) where you can make out the grain in the wood. The blackest ebony might be used to depict a subject of great dignity. Satinwood, a light striped, beige-colored wood native to Bali, may inspire pieces of a softer theme. The grain often follows a skin pattern or veins in the arms of the statue.

The sounds of gentle hammering, sanding, and spontaneous chatter of the woodcarvers fill the lanes in villages like Mas. They sit cross-legged on the floor surrounded by piles of freshly carved wood chips and rough, uncut blocks as chickens peck their way around the tools. The sweet aroma of clove cigarettes and coffee hangs over the warm, humid air.

Carvers work with simple tools—a hand-held knife or a chisel struck with a hammer or mallet. The art of the wood carver depends on knowledge of specific woods, skill in fashioning the material, and talent in design.
     
Traditionally, they smoothed their pieces with pumice and gave them a high polish by rubbing them with bamboo. Traditionally, they treated and stained their carvings with oils to achieve a pleasing subtle gloss, but now Balinese artisans find that neutral or black shoe polish produces much the same result with half the effort.
    
In the main woodcarving centers, high-quality carvings sell for as much as US$3,500 apiece. Contemporary carvings in natural woods begin selling for around $25 and go as high as $500 online.

But regardless of how commercial the subject matter, all carvings share certain characteristics and techniques uniquely Balinese. Even the copyists work strictly within the self-imposed rules of an established style.

Electric Lamps for Everyone

QUESTION: Several years ago, I bought an early electric glass lamp at a flea market. Although it was filthy and needed lots of TLC, I decided that I just couldn’t live without it. After giving it a thorough cleaning and having it rewired, I noticed how much it looked like the Tiffany lamps of the early 1900s. Upon further inspection, I noticed E M & Co. impressed into the base. So far, I’ve been unable to discover who E M & Co. is? Can you tell me who made my lamp and a little about it.

ANSWER: You’re the proud owner of a beautiful silhouette lamp—called that because of the silhouettes created by the shade when the lamp is on—made by the Edward Miller & Company of Meriden, Connecticut.

Unfortunately, when people think of metal and glass lamps of the early 20th century, they usually associate all lamps with Louis Comfort Tiffany. Then their eyes light up with dollar signs. But most of the lamps from this period were not made by Tiffany.

When Tiffany first began making his lamps, they were expensive to make and expensive to buy. Prices for them ran into the hundreds of dollars. Slag glass panel lamps, as they're known  today, had a few large pieces of glass fitted into a cast metal frame that simulated the effects of the more expensive leaded glass lamps. That made them affordable for the average person. A 1925 Sears, Roebuck and Co. catalog offers metal table lamps fitted with "art glass" priced from $6.90 to $19.

Many companies made this type of lamp. Often the lamps weren’t signed, but if the makers did mark them, they usually cast their mark into the metal on the bottom of the base. Sometimes they placed a mark on the metal edge of a shade or elsewhere on the base. Some lamps had paper labels, but most of them are long gone. Edward Miller & Company was one of many lamp makers.

The Miller Company began in 1844 in Meriden, Connecticut, as Joel Miller and Son. Originally, the company produced metal candle-holders, then moved on to kerosene lamps, gas lighting, and electric lighting. The name of the company changed, also, becoming Edward Miller & Company, then The Miller Company, both under the mark E M & CO on their lamp bases.

Although Miller produced expensive leaded glass lamps, the company took advantage of the opportunity to sell lighting to the middle classes as more homes became wired for electricity. The company sold lamps in bulk to utility companies in large cities who retailed them to their customers. A 1920 Philadelphia Electric Company catalog shows lamps with prices from $12.50 to $60, depending on size.

Miller took advantage of the latest discovery in lighting—electricity. Up to the last decade of the 19th century, everyone owned and used either gas or kerosene lamps. But the light they gave off was dim. The discovery of electricity led to lamps that glowed brighter in a downward direction, thus offering improved lighting for reading and sewing.

Though electrical lamps offered lots of advantages, there were problems with the carbon filaments in early incandescent light bulbs that didn't last long. The bulbs turned dark inside from carbon, and they used a lot of electricity per watt of light. The invention of the tungsten filament bulb and improvements to it made between 1906 and 1910 established electric lamps as a practical and reliable alternative to gas and kerosene.

These early electric lamps offered a variety of base and shade overlay designs, influenced by several style movements including Art Nouveau with its intricate curvy lines and botanical themes, Arts and Crafts with its simpler forms and straighter lines, and Orientalism with its Middle Eastern flavor. And with the discovery of King Tut's tomb in 1922 , people’s interest in everything Egyptian grew.

Lamp creators took their inspiration from all of these influences, giving consumers a choice of floral designs, geometric patterns, or scenes with camels, palm trees and pyramids. Other designs reflected Neo-Classical Revival architectural and furniture styles, employing fluted columns, garlands, and urns as design elements.

Manufacturers produced slag glass lamps with amber glass, as well as other colors. Amber was the dominant color because it proved to be the most restful for reading. These lamps often have more than one color of glass. Makers sometimes used various colors of slag glass to simulate sunsets or water behind their metal frames.

Today, these same slag lamps sell for $500 to $1.500, depending on style, size, and especially condition. Smaller varieties, known as boudoir lamps, sell for less while larger ones sell for more.

With the onset of the Great Depression, the market for more expensive dramatic, heavy lamps with glass shades faded and manufacturers responded with cheaper, lightweight lamps with paper or fabric shades.

Cottage Charm

QUESTION: I have a cabinet that seems to be handmade. One of its drawers has three compartments side by side and one in the back for silverware. The other drawer doesn’t have compartments but does have slots cut into it as if there were slats at one time. There are three shelves in the base of the cabinet. What I am curious about is the fact that the top slants to the back. At first I thought it was the way it was sitting, but after moving it several times I noticed that it’s made that way. The top narrows slightly at the sides from front to back. I have never come across anything like this and was wondering if there was a reason behind the slanting or if someone just had poor craftsmanship! I appreciate any information you can offer.

ANSWER: What you have is a Victorian sideboard. This style is known as Cottage Victorian. Sideboards had been around since the 16th century. They were made to serve food and hold table linens, serving pieces, and flatware. In smaller Victorian cottages, there wasn’t a lot of room. Many didn’t have a formal dining room, but just a dining area in the parlor. So that’s why your sideboard is smaller than normal. Usually, the makers of these pieces painted them in bright colors, often adding  colorful floral decorations. While your sideboard could have been homemade, I doubt it. It may have been altered, however, to stand straight on a slightly slanted floor, thus the slanted top. Unfortunately, the hardware on your sideboard isn’t original. Most of the time, Cottage Victorian furniture had simple wooden knobs and handles.

Cottage furniture became popular in the United States, particularly along the East Coast, after the Civil War. Pieces began appearing in workshops and then homes of the wealthy in places like Martha's Vineyard, Cape May, and the Berkshires. But the popularity of these items didn’t  remain exclusively with the upper class. As the middle class grew, equally elegant, but relatively reasonably priced versions began to appear in the homes of the nation’s growing work force, particularly in Pennsylvania and New England.

Homeowners purchased Victorian Cottage furniture in mostly bedroom "suites", sold as  coordinating groupings consisting of a double bed, a washstand, a dresser or vanity with an attached mirror, a small table, a straight chair and a rocker, and often a wardrobe. Cabinetmakers used pine or other inexpensive wood, then painted the entire piece with  several layers of paint. The finished sets were colorful and whimsical.

Cottage Victorian beds have high and lavishly decorated headboards. Finials and medallions constituted what little carving there was on most pieces. Most of the decoration took the form of painted flowers, fruit, and other plants, featuring a large painted bouquet-like medallion in a central panel on the headboard and a smaller, matching one on the foot-board. Local cabinetmakers, most of whom didn’t have any formal training, built these pieces from designs in pattern books. And since they had no formal art training, the decorative elements they applied to their pieces had a primitive, folk art feel to them. A few featured highly detailed and beautifully executed scenes of sailing ships or local wildlife. They painted all the pieces of a furniture suite with the same motif. The most popular base colors were tan, blues, greens, and pinks. A few rare ones use the varnished natural wood as the background onto which the cabinetmaker applied the decorative designs.

An artisan then painted it with a base of soft yellow, and highlighted this coat with green bordering, and rows of flowers, and spandrel fan designs in the corners, giving it vigor. Although such a piece was commonplace once, it’s rare and valuable today. One of the biggest misconceptions regarding antiques is that 19th-century homeowners loved the appearance of natural woods in their furnishings. That preference didn’t appear until the early 20th century. As a result, most painted furniture has been stripped and finished to the often not so beautiful bare wood by well-meaning dealers and collectors. Although cabinetmakers refrained from painting their costly mahogany and walnut pieces, those in small towns and villages paint-decorated nearly all their birch, maple, oak, pine, and poplar furnishings to brighten their customers’ dark, oil-lamp lit homes.

Cabinetmakers fitted drawers and cabinet doors with wooden knobs instead of metal hardware. Even the boldly colored paint, didn’t have the look of value to it. Those pieces of Victorian Cottage furniture that have survived intact usually have a crackled surface from age-shrinkage, with flakes in spots due from dryness. Also, look for signs of wear on edges, tops, and near the knobs.

To the untrained eye, Victorian Cottage furniture looks as if it should be sold as junk or stripped to the bare wood. Whatever you do, don't strip your sideboard. If possible, get an opinion from someone who knows painted furniture.

When purchasing painted Cottage Victorian furniture, look for a bone dry surface, subtle wear, and age crazing that has shrunk geometrically. Fortunately, those who fake antiques haven't figured out a way to create spider-web-like lines with chemicals. Good painted furniture has charm and an integrity that makes it one of today's best antique investments since painted pieces haven’t been reproduced. .