An Ounce of Prevention is Worth a Pound of Cure

QUESTION: What’s the best way to maintain antique furniture? When I see pieces at antique shows, they always look so beautiful. Is there some trick to making them look that way? Can you tell me the best way to maintain the pieces I have? While I have some older ones from the early 19th century, most are from the mid to late 19th century.

ANSWER: You’ve asked about two different procedures. The first is all about restoration while the second is about conservation.

Generally, restoring pieces made before 1830 affects their value. If a piece is more than 60 percent restored, it drastically loses value. Refinishing these early pieces destroys their patina. On the other hand, pieces made after 1830 usually benefit from restoration. The 60-percent rule doesn’t apply to them.

Restoration can range from minor repairs to a complete professional refinishing. With improvements in materials and finishes, a person can do some simple refinishing at home. However, for more complex work, especially when a piece may have several layers of old paint that have to be removed, it’s a good idea to invest in the work of a professional furniture restorer.

Before attempting to refinish a piece of antique furniture, assess it’s overall condition. If the piece just looks dull and dingy, it’s possible it may just need a thorough cleaning. Cleaning wood can do wonders for it.

If there’s oily dirt or grease, such as may get on pieces in a kitchen, remove it with an old washcloth, soaked in a mild dish detergent and water solution and wrung out. Work on small area at a time and dry it immediately with a soft cloth. Always avoid using too much liquid directly on a piece’s surface.

An alternative is to use Murphy’s Oil Soap in spray form. Spray a little on the wood and wipe with a damp washcloth. For really grimy surfaces, use #0000 steel wool and Murphy’s, then wipe with a wet washcloth, and dry. Allow the piece to dry thoroughly for 24 hours before waxing. Wipe the surface with #0000 fine steel wool until smooth.

After a piece of furniture is cleaned, it can be freshened up using Wood Sheen, a rubbing oil stain and finish made by Minwax that combines tung oil with a coloring agent, available at most hardware stores and home centers. This product comes in a variety of wood stain colors to match most types of wood.  tra fine (four zero) steel wool. Wipe the surface again with a damp cloth. Apply a thin coat of Wood Sheen using an old sock and let it dry for an hour or two. Do not do this more than once every year or so.

An alternative to using Wood Sheen is to wax it with Minwax paste wax. This is a petroleum-based product that comes in both natural and dark shades for light and dark-stained furniture, respectively. The hard surface it produces can be dusted more easily and without the danger of scratching because its smoother. Waxing once or twice a year is sufficient for table tops and chair arms. For less used areas of furniture, such as chair legs and case pieces, wax only every four years.

Conservation of antique furniture is all about maintenance and keeping it clean. Avoid using any of the popular spray dusting helpers. These tend to leave a nasty buildup on furniture that’s hard to remove later on. Instead, use a soft cloth to gently wipe away the dust. You can also slightly dampen the cloth with liquid glass cleaner.

Avoid using any of the popular oil-based liquid furniture polishers. These leave an oily residue that attracts dust. Lemon oil is one of the worst because it doesn’t sink into the wood like commonly thought but lays on the surface acting as a dust magnet.

Be extra careful when cleaning any wood that has been gilded. The gilt is usually applied with a water-soluble adhesive which can be removed by detergent cleaners. To clean uneven or carved surfaces, use a soft-bristled brush or your vacuum cleaner with the brush attachment. Be careful not to hit the furniture in any way with the vacuum cleaner, itself.

Do not use feather dusters. They move the dust around and can scratch the surface.

Before using any cleaner on a piece’s surface, test an inconspicuous area towards the back first.

Try not to polish hardware while it’s attached to the furniture. The polish will damage the furniture’s finish. Instead, remove the hardware and polish separately, being sure to rinse or wipe it thoroughly before reattaching it to your pieces. If hardware cannot be removed, be sure to mask it from the furniture’s surface to prevent damage. For ornate hardware, use a cotton swab dipped in the detergent solution.

Do not polish ormolu, which really isn’t brass but bronze. Instead, wash it with a soft cloth soaked with a mild dish detergent.

If mold or mildew forms on a piece of antique furniture, dampen a soft cloth with a very mild bleach solution (two tablespoons of bleach to a quart of water) and wipe the affected area. Dry immediately with a soft cloth, then wax as stated above.

Heat dries out the wood of antique furniture, loosening joints. An interior should be kept at a comfortable level but not excessively hot in the winter. If the temperature must be kept higher, put pans of water around to humidify the air or use a humidifier. The air will be healthier, also.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about religious antiques in the special 2018 Holiday Edition, "The Art of the Sacred," online now.

Slipping and Sliding Along

QUESTION: I’ve loved to ice skate ever since I was kid. When it got cold enough to the local pond to freeze over, my parents would take my siblings and I ice skating. I remember the first pair of skates I received for Christmas when I was just six years old. Over the years, my interest and love of skating has grown. Even though I’m no Olympic champion, I’m a good skater. I also have an interest in the history of skating and have begun to collect bits and pieces of skating history—old skates, postcards, photographs, and such. What can you tell me about the origins of skating and the possibilities of collecting skating memorabilia?

ANSWER: Even though people have been skating since 300 A.D., the great interest in skating, especially figure and speed skating, grew out of the advent of the Winter Olympics. And while you and others skated on frozen ponds, many people today, especially those living in cities, skate on man-made skating rinks, both indoor and outdoor.

There was a time when ice skates were more of a mode of transportation with even armies known to have strapped on blades before military engagements.

An animal bone strapped to a fur-lined clog-type boot was the earliest form of skate used 1,500 to 1,700 years ago. At times, skaters may have also used a staff, or pole, to assist in propelling them over the ice and uneven frozen marshes.

Elk, horse, cow and deer bones as well as walrus teeth were the most commonly used material for this rather unsteady mode of transportation. Most of the skates measured 11 to 12 inches. Leather thongs went through holes drilled at each end of the bone and tied around boots.

Eventually, skate makers developed a clog type shoe with metal strap for the blade that was fitted to the bottom, called a snow skate . They carved them out of a block of wood and placed  animal hides into the clogs to keep the feet warm. Styles of skates varied depending on the country of origin and purpose.

Historians believe iron blades originated in the Netherlands as early as the 14th century. To help skaters glide over rough ice, the Dutch developed skates with a high curly prow at the front of blade.  They made the sole of the skate from oak, rosewood, walnut or beech. They stuck a sharp pin or screw into the heel of the wooden sole to help secure the boot heel to the skate. But many skaters still suffered broken bones from these types of insecure skates.

The ingenious Dutch also developed a faster way to skate in the 16th century called the “Dutch Roll,” the current method of skating, which allowed Dutch skaters to travel 40 to 50 miles a day. Dutch peasants skated over frozen canals to markets to sell their wares. This type of skating was more about speed than artistic skating style.

Sometimes, skate makers replaced iron blades replaced with brass or bronze ones. The first English figure skate had short iron blades with gently curved bottoms. No more than two inches of the blades touched the ice at any time. Skaters needed great skill to keep their balance on these early skates. Today’s skaters still wear the curved bottom figure skate blade.  And as skate designs evolved, skaters created new moves on the ice.

Early American merchants imported skates from England, Holland and Germany. In 1883,the C.W. Wirths Co. in Germany exported 600 pair of "high quality skates" to a firm in Philadelphia. They had exceptionally high curls on the prow and brass acorns at the tip.

There was an American skating mania from the 1850s to around 1900. As many as 50,000 skaters crowded onto the Central Park ice in one day. E.V. Bushnell, an American mechanic, invented the first integral, all metal footplate and blade skate in 1848. However, thousands of skaters still preferred the old wood platforms. Between 1800 and 1850, 200 skate models, good and bad, came into the U.S. Patent Office. An additional 400 patents related to skates appeared between 1850 and 1900. In 1870, skate makers developed the hollow ground blade  and became a great help in executing sharp edges for many intricate moves.

An important American skater, Jackson Haines, presented skating exhibitions up and down the East Coast of America and Canada. He invented a new style of skate to help develop his skill and artistic skating. His forged his blade onto steel toe and heel plates that could be screwed directly and permanently onto the sole and heel of the boot. He added teeth to the front of the blade to help in jumping. He became known as the founder of the international style of skating, and invented the Sit Spin, which figure skaters still use today.

In 1914, John E. Strauss, a St. Paul, Minnesota, blade maker developed the first closed-toe blade of one piece of steel. He attached the tip of the prow to the front foot plate rather than protruding unsupported.

Skates from the 1850s with metal footplates sell in the $100 to $200 range, depending on their condition. Rust on any skate will detract from its value.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about religious antiques in the special 2018 Holiday Edition, "The Art of the Sacred," online now.

Let's be Crystal Clear

QUESTION: When I was in fifth grade, my family went on vacation in the lakes region of New York State. While we were there, we visited the Steuben Glass Factory. I marveled at the clear crystal figures and lovely bowls and vases, decorated with delicate engravings. Ever since then, I’ve wanted to collect pieces of Steuben glass, but I have no idea where to begin. Can you help me?

ANSWER: You were right to be enamored of Steuben glass. The company produced some of America’s finest art glass.

Frederick Carder and Thomas G. Hawkes founded Steuben Glass Works in the summer of 1903 by in Corning, New York, which is in Steuben County, from which Carder and Hawkes derived the company name. Hawkes was the owner of the largest cut glass firm then operating in Corning. Carder was an Englishman (born September 18, 1863) who had many years' experience designing glass for Stevens and Williams in England. Hawkes purchased the glass blanks for his cutting shop from many sources and eventually wanted to start a factory to make the blanks himself. Hawkes convinced Carder to come to Corning and manage such a factory. Carder, who had been passed over for promotion at Stevens and Williams, consented to do so.

Carder produced blanks for Hawkes and also began producing cut glass himself. Carder loved colored glass and had been instrumental in the reintroduction of colored glass while at Stevens and Williams. When Steuben's success at producing blanks for Hawkes became assured, Carder began to experiment with colored glass and continued experiments that were started in England. He soon perfected Gold Aurene which was similar to iridescent art glass being produced by Tiffany and others. Carder followed Gold Aurene with a wide range of colored art glass that Steuben produced in more than 7,000 shapes and 140 colors.

Steuben Glass Works continued to produce glass of all sorts until World War I. At that time war time restrictions made it impossible for Steuben to acquire the materials it needed. Corning Glass Works eventually purchased the company and made it its Steuben Division. Carder continued as Division manager without any real change in the company's operation except that he now had reporting responsibilities to Corning Glass Works' management. Corning's management tried, mostly unsuccessfully, to limit the articles that Steuben made to only the most popular. Production continued until about 1932.

The Great Depression limited the sale of Steuben, plus its popularity waned. In February 1932, Corning appointed John MacKay to Carder's position, and Carder became Art Director for Corning Glass Works. At that time, Steuben produced primarily clear art glass.

Corning Glass Works appointed Arthur Houghton, Jr. as President in 1933, and under his leadership Steuben changed artistic direction toward more modern forms. Using a newly formulated clear glass developed by Corning which had a very high refraction index, Steuben designers developed beautiful, fluid designs.

Scandinavian techniques, combined with newly developed optical glass composition, replaced it. Steuben hired architects and designers who worked closely with glassworkers. Before then, the engravers had worked at home.

Sculptor Sidney Waugh was among the first to use the new figural engraving techniques for Steuben, with his crystal “Gazelle Bowl.” He created a series of decorative pieces using copper-wheel and diamond point engraving, similar to Scandinavian style.

The themes during this period included "balustrade" designs for water goblets and candlesticks, footed bowls and serving pieces. Decorative forms included wildlife pieces representing owls, penguins and other birds in smooth stylistic forms. Some pieces, such as the Ram's Head Candy Dish, playfully included clean lines crowned by an ornate design (a ram's head, complete with a ruff) on the lid as an homage to its classic earlier pieces.

The company also entered into the field of larger show and presentation pieces celebrating various scenes, such as its cut-away design featuring an Eskimo ice fisherman above the ice and the fish below. In some cases, artisans used sterling silver or gold plating over a metal finish, such as the golden "fly" atop the nose of a rainbow trout. Each piece is signed simply with Steuben on the underside of the object.

World War II cut production of Steuben glass. The company didn’t produce lead crystal pieces until the 1950s. By the mid-1950s, Steuben had begun producing free sculptural pieces.

Toward the 1990s, the company also began production of small objects—"hand coolers"—in various animal shapes.

Items from this period were also noted for their careful and elegant packaging. Before boxing, each Steuben piece was placed in a silver-gray flannel bag (stitched with the Steuben name), and then placed in a presentation box.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about religious antiques in the special 2018 Holiday Edition, "The Art of the Sacred," online now.

The Way to a Mother’s Pocketbook was Through Her Children

QUESTION: I discovered my first child’s advertising booklets quite by accident. I was actually looking through a box of assorted vintage paper goods at a local flea market when I noticed a tiny booklet. It was an illustrated nursery rhymes distributed by Clark’s O.N.T. Thread. I’ve seen other advertisements from the late 19th century but never thought anything about it. Why did advertisers use children in their ads? And why did they distribute children’s books to promote their products? I’d like to start collecting these little books, but I don’t know where to begin.

ANSWER: While there’s a dedicated group of children’s advertising booklet collectors, many people have never heard of them. However, during the late 19th and early 20th centuries, children’s advertising booklets were a common item in many households. Everything from coloring books to junior cookbooks caught the eyes of advertisers.

As early as the 1850s, manufacturers realized the way to a mother's purse strings was through her children. What mother could resist the purchase of Clark's O.N.T. thread when doing so would include an educational booklet of rhymes for her little one? Besides, O.N.T. Black fast thread was "guaranteed never to show white on the seams after being worn or washed” –clearly a win-win situation.

But Clark's O.N.T. thread wasn’t the only company to take advantage of a mother's love for her children. The heyday of consumer advertising in the United States was in the last quarter of the 19th century. This was a time when steam presses and chromolithography made visually appealing promotional material relatively inexpensive, and when manufactured goods proliferated.

The great Centennial Exposition in Philadelphia in 1876, with its myriad of domestic exhibits, inspired thousands of different advertising handouts. Advertisers began to use the image of a comfortable middle-class life as an inducement to purchase their products. Well-fed babies and well-dressed children at play were themselves symbols of material accomplishment. Plus, they portrayed the picture of wholesomeness.

At the same time. advertisers became aware that the woman in the household made most of the buying decisions, especially of household goods. The logical conclusion was that promotions which doubled as toys for children might also attract sales.

Many of these little promotional booklets have survived. So what affects their value? Condition, subject matter, general appeal, author, and illustrator are all important when determining the value of a children’s advertising booklet or an ad with children in it. Though companies hired prominent illustrators to create these booklets, many of them aren’t given credit. Among the more famous ones are W.W. Denslow who illustrated The Wizard of Oz, Johnny Gruelle who did Raggedy Ann, and Maxfield Parrish, who became known for his high fashion Art Deco paintings. So booklets that feature these artists are likely to command a premium.

The Wonderful Lunch Boxes, illustrated by 20th century children's book illustrator Shirley Kite is a good example. Printed in 1925 and 1927, the book came inside boxes of a variety of Post cereals, including Bran Flakes, Instant Postum and Postum Cereal, Grape-Nuts, Toasties, and a cereal that obviously didn't go over too well----Bran Chocolate.

There was also a wide variety of advertising booklets available. Coloring books, nursery rhymes, and alphabet booklets were particularly successful as advertising promotional material. In most cases, advertisers created ingenious tie-ins with their products, using verse, parody and caricature. Occasionally, advertisers included watercolor “chips” in coloring books, and sometimes interleaved the pages with glassine to protect the images from smearing once children colored them.

However, not all advertising booklets were aimed at children. In 1910, Ivory Soap issued “Elizabeth Harding, Bride,” an advertising booklet with instructions on how to clean everything from blankets and brassware to hardwood floors and rubber plants all using Ivory Snow. It seems new bride Elizabeth feared her housekeeping abilities would be unacceptable to her new husband until Ivory Snow saved the day.

Jell-O was America's first packaged dessert, and owner Orator Woodward had a tough time convincing the public that combining water with white powder would produce tasty fruit-flavored gelatin. In 1902, Woodward hired door-to-door salesmen to hand-deliver Jell-O recipe booklets. The strategy was a key part of Jell-O's marketing for decades. And as with previous booklets, prominent artists illustrated many of them. One of the most famous is Rose O'Neill, best known for the Kewpie doll. A 1915 mint condition example of Jell-O and the Kewpies now sells for over $100.

Collectors can still find great examples of charming booklets for under $100, and many are still priced for less than $50.

Along with the promotional booklets, advertisers also used children in illustrations for some not-so-common products. One of the most bizarre was “The Dutch Boy’s Lead Party,” a paint book for children. Considering that housepaint used to contain lead, it seems a bit noxious to promote it with children. Then again, maybe that’s supposed to be pronounced “leed.”

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about the Retro style in the Fall 2020 Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Under the Coverlets

QUESTION: I’ve long admired the colorful coverlets that are often on display in museum gift shops. Recently, I saw an exhibit of them at a museum in Indiana. The variety was astonishing. I know they were done on a special kind of loom, but I forget what it was called. Can you tell me more about how these coverlets were made and a bit about their history?

ANSWER: Coverlets originated in Europe. Early ones, woven on a four-harness type loom, didn’t have complex patterns like those made in the mid 19th century in the United States. Their unique designs were made possible by the invention of the “Jacquard” loom.

Household weavers usually women, produced these decorative and warm bed covers. They created simple but visually exciting geometric overshot coverlets. Complex, figural designs were more difficult to produce alone on the same loom. That changed in 1806 when Joseph Marie Jacquard of France invented a mechanical attachment that could be attached to most looms by professional male weavers. A series of punched cards  guided the raising and lowering of the warp threads to form complex designs. Repeated motifs could be endlessly varied and re-combined. Floral designs, birds, simple buildings and stars were common, with a central section usually framed by a border along the top, sides, and bottom. Many Jacquard coverlet weavers "signed" and dated their textiles on the decorative corner blocks at the bottom corners.

The Jacquard attachment first appeared in America in the early 1820s, probably by one of the many German, English and French hand weavers who had immigrated from their native countries in Europe. These immigrant weavers tended to settle in areas with populations of their own ethnic group and near sources of good quality wool. Many brought some type of Jacquard attachment or at least the experience to use one. Some even developed their own devices based on Jacquard's idea and patented them in the U.S.

The earliest American Jacquard coverlets appeared in New York and Pennsylvania in the late 1820s. As weavers saturated the market in the Eastern states, and weaving became more mechanized and moved into a factory setting, many weavers moved westward into Ohio and Indiana, and eventually to Illinois, looking for new markets as well as farmland. Raw wool and commercially spun yarns as well as natural and synthetic dyestuffs needed for weaving could easily be obtained throughout the state. The weavers settled in or near agrarian communities among people of shared backgrounds and familiar with folk motifs and designs used in coverlets, primarily those from Germany, France and England. The weavers made lasting contributions to the communities in which they settled, opening businesses and promoting weaving; perhaps most importantly, they brought a touch of color and technical design to an expanding 19th-century population on the western frontier.

Jacquard weavers derived the patterns and motifs they used from well-known folk traditions of Western Europe. The designs of most Illinois coverlets can be traced back to Ohio and Pennsylvania coverlets. The center field patterns were either a large, repeated symmetrical motif on two-piece ones or a centered medallion on single-width coverlets. Floral motifs appeared most frequently, in the Four Lilies and Sun-burst, Four Roses, Octagonal Four Roses, Four Leaves and Four Acorns, and Four Bellflowers patterns. Star and Sunburst designs were also common.

Illinois Jacquard coverlets, like their Pennsylvania counterparts, had borders along each side and the bottom. Popular traditional Germanic motifs include the distelfink, or thistle finch, and Grapevine. A corner block or name line identifies the weaver, his location, and usually the year of production.

Typically, weavers produced cotton coverlets for weddings and births. Wedding or bride coverlets or blankets were required items in a young woman’s hope chest. Starting around 1825, major towns had a resident weaver whose job it was to make blankets and accept work on commission. The weaver may have had an apprentice and the weaver’s loom was the site of his/her business dealings. Coverlets were double woven and produced with wool and imported indigo blue and madder red or brown dyes. A traditional early 19th-century woven coverlet would cost the buyer between $5 and $15. Coverlets were much more commonplace than quilts from about 1823 to the end of the Civil War in 1865.

Learn more about Jacquard coverlet and rug weaving by reading "Weaving their Way Into History" in The Antiques Almanac. This is the story of a family who has kept Jacquard coverlet weaving alive in Pennsylvania.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about the early 20th century in the Fall 2018 Edition, "20th Century Ltd.," online now.

Jewelry for the Dinner Table

QUESTION: I’ve been collecting napkin rings for quite a while. To date, I have about 50 or 60. I’ve always been intrigued by the multitude of designs and materials from which they’re made. Recently, I was thinking that I don’t really know how they got started. Can you tell me the origin of napkin rings? To they go back a long time or are they a relatively recent invention?



ANSWER: While most people today use napkin rings for special holiday dinners or special dinner parties, in fact, they had a totally different use when they first appeared.

People use napkin rings, sometimes called christening bangles, to hold table napkins neatly on a dining table. Historians believe they were originally handmade from strips of fabric and used to identify the napkin of each user between weekly wash days so each person could continue using the exact same one as a way of keeping illnesses at bay.

The Chinese invented paper in the 2nd century BCE and soon after created paper napkins. People used paper folded in squares, known as chih pha, when serving tea.

Around 1800, members of the French bourgeoisie originally gave single silver napkin rings engraved with the name of the owner as christening gifts and pairs of them as wedding gifts. Soon, they became available in numbered sets of 4, 6, 8, 10, or 12 in all countries of the western world. Most 19th century napkin ring makers made them of silver or silver plate, as well as bone, wood, pearl embroidery, porcelain, glass, and other materials. In the 20th century, bakelite and other new materials were used.

Napkin rings appear as single items with the name or initials of the owner, notably given as christening presents, or pairs often given as gifts at weddings and silver weddings. In the English speaking countries, numbered sets of 4, 6, 8, 10 or 12 napkin rings are found. Napkin rings are an invention of the European bourgeoisie, first appearing in France about 1800 and soon spreading to all countries in the western world. Most 19th century napkin rings were made of silver or silver plate, but others were made in bone, wood, pearl embroidery, porcelain, glass, and other materials. In the 20th century, they used Bakelite and other plastics.

Almost every silversmith in Europe and in the United States made sterling silver and plated napkin rings. Even the basic rings sometimes had fluted borders, scrolled patterns, and sections of satin finish.

Americans loved figural napkin rings—a simple napkin ring part of which was a small figure or sculpture that could take any shape and show any motif. Special rings made for children with little chicks, dogs, and cats were a favorite gift for christenings and Christmas. But beautifully designed rings with floral motifs, monograms and other design elements were just as popular.

Upper middle and upper class Victorian families used napkin rings for fashionable and refined dining from shortly after the Civil War to shortly before World War I. During this time, napkin rings were especially elaborate and artistic. Many makers created napkin rings set on a platform base along with an ornate figure of a bird, flower, or cherub.

People considered napkin rings personal items, so they had them engraved with an individual's name, initials, or family designation such as Mother and Father.

Sculptured fruit such as cherries and gooseberries, flowers including lilies and roses, a snail and shell, a frog and lily pad, a dog house with a dog at the door, butterflies and fans, are only a few of the Victorian fancies now available to the collector as a result of the variety which were manufactured.

The Meriden Britannia Company Probably was the largest and most prolific of the silver plated napkin ring manufacturers. Their catalogs sometimes included a half dozen pages of just rings.

Other sterling silver napkin rings came from Reed and Barton, William Rogers, Gorham, Tufts, Unger Brothers, Wilcox and even the legendary Tiffany. By 1893 Marshal Field Company of Chicago was proudly offering napkin rings of "engraved satin” or of 'bright silver and gold lined."

 To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about the early 20th century in the Fall 2018 Edition, "20th Century Ltd.," online now.

Airline Collectibles Take Off

Question: I’ve traveled a lot for business in my career. Most of the time I’ve flown Business Class, but occasionally I got upgraded to First Class. Over the years, I’ve amassed a bunch of items from my many flights—baggage tags, menus, odd pieces of flatware, napkins, toiletry kits, and even little gifts from some overseas flights.  Are these things collectible? Are they worth anything?

Answer: Airline collectibles are hot. Although airline memorabilia collecting has been around for many years, many people don't realize just how long such items have been collected. Even the smallest of items can make for an interesting collection.

Collecting commercial airline items is still a new area, and, depending a what a collector chooses to collect, can still be quite affordable. The fact that many long-established airlines that were once household names have stopped flying adds to the lure of collecting airline memorabilia.

There are almost as many ways to collect airline items as there are airlines and airplanes. In fact, many people collect them by airline, a distinct collecting category. Some people have a love or hate relationship with a specific airline. It may be with the airline on which they flew first, or one they or a family member worked for. Some collectors build their collections around a specific aircraft or focus on a specific type of item such as airline china or insignias. There’s also a distinction between "vintage" airline items and newer ones, such as photographs or new models that can be found at shows. Beginning collectors should be aware that in addition to vintage postcards, newer ones have been produced in recent years and may be found at shows. Often these newer cards, which may look similar to vintage ones, are priced like them.

Some collectors choose to collect airline insignia or service pins by airline or crew position. Service pins feature small insignia, or items bearing the corporate insignia, awarded to crew members for a certain number of years in service. Collectors have found several different styles of insignia for an individual airline. Some companies used cloth hat badges before turning to metal hat insignia. Wings may be all metal or made with ceramic insets containing the corporate logo. The price for insignia varies depending on age, condition, style, crew position and airline. Depending on the piece, prices for more common insignia can be less than $50. Collectors can expect to pay up to several hundred dollars for older or rare pieces.

Today, many airlines have eliminated in-flight meals. Passengers are lucky to get a tiny bag of peanuts or pretzels. In the early days of air travel, passengers ate from fine china with metal flatware. Not only does the china reflect the elegance of an earlier time, but it’s a popular aviation collectible. Prices vary based on airline, age, piece and condition. When buying airline china, collectors use the same criteria as when purchasing other vintage china or ceramics, such as chips, cracks, and scratches.



Depending on where they’re purchased, prices for glasses can range from $5 to $25 as compared to cups and saucer sets that have a higher value of between $30 to $50. Plates can range from $50 to $250 depending on the age, decoration, condition and airline. Collectors expect to pay more for pieces from early airlines or ones that catered to "first-class service."

Airplanes themselves also attract collector interest. Some antique aircraft can be seen in museums. Others have been lovingly restored by collectors or consortiums and can be found tucked away in small local airports or seen flying high at air shows. For those who can't afford an entire plane, collectors can still land a variety of items related to their favorite aircraft such as instrument panel posters used for crew training or flight manuals.

Aircraft used by commercial airlines from around the world have been captured in photographs and prints, as well as on postcards and in paintings. Those who love the form and graceful lines of an aircraft aren’t restricted to pictures. Models, whether put together by future pilots or professionally made for a travel agent's desk, are collectible. A metal travel agents' model can cost upward of $2,000, even more if it’s of a popular airline or airplane.

Much of the paper ephemera directly associated with planes can be relatively inexpensive. Most safety cards are valued between $1 and $3. Safety cards are plastic laminated cards or folders that give information to passengers on the locations of emergency exits. Other types of paper collectibles are postcards and playing card decks. Postcards can be picked up for a dollar or two, and many playing card decks for between $5 and $10. For those who collect manuals, user's manuals and flight logs from the 1950s and older are preferred, although that may change as newer planes are removed from service. An added value to a manual is that many of them contain sketches and photographs, as well as the technical specifications, and were put in binders bearing the company logo.



Before the days of computers and the Internet, printed flight schedules were the travelers'—sometimes the flight crews'—travel guide. Prices vary for flight schedules depending on age, condition, airport and airline. For instance, those from the 1990s sell for $1-2, those from the1980s for $2-4, those from the 1970s for $4-6, and those from the 1940s and 1950s for $20-30. Schedules from the 1930s can cost between $60 and $100.

Almost anything with a corporate logo can be found in an airline collection including corporate literature, annual reports and magazine advertisements. There can also be crossover collecting where the advertisement showcases the aircraft. Illustrating the graciousness of airlines of the past are complimentary toiletry kits. Given to the traveler who forgot his toothbrush, kits can also contain razors, toothpaste and shampoo. Perhaps the most unusual airline collectible are air-sickness bags. Yes, there are collectors who desire them—preferably unused.

After eating Yankee pot roast and glazed carrots with sourdough rolls, passengers on a Pan Am flight could enjoy cherry pie and saltwater taffy. Beer was 50 cents and a split of champagne cost $1. And it didn’t cost a dime for you to be free of your luggage. Those were the days.

To learn more about collecting airline memorabilia, read "Up, Up and Away With Airline Collectibles" in my antiques ezine, The Antiques Almanac.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about the early 20th century in the Fall 2018 Edition, "20th Century Ltd.," online now.

The Beauty of Doulton Burslem Ware

QUESTION: I recently came across several pieces of what a dealer called Doulton Burslem Ware at an antique show. I have never heard of this type of pottery, even though I have several pieces made by Royal Doulton in my collection. Were these pieces specially made? Did Doulton make them in a separate factory. Where did the name Burslem come from?

ANSWER: Over its history, Royal Doulton made a variety of types of ceramics, including pottery and porcelain. Its Burslem line featured its finest porcelains.

John Doulton began his working life as a potter’s apprentice at Dwight’s Pottery in Fulham, England. In 1815, he went into business for himself in Lambeth, partnering with a journeyman names John Watts and a widow named Martha Jones. After Martha Jones left the partnership in 1820, John Doulton changed the company’s  name to Doulton & Watts. The business specialized in making stoneware articles, including decorative bottles and salt glaze sewer pipes. The firm took the name Doulton & Company in 1853 after the retirement of John Watts.

His son, Henry, joined his father in 1835 at age 15. He quickly mastered the technique of throwing large vessels. Legend has it that he once made 15 3-gallon filter cases before breakfast. To celebrate his coming of age in 1841, Henry made and fired a 300-gallon chemical jar. His father was so proud of him he displayed it with a sign reading, "The largest stoneware vessel in the world."

Not only did Henry have skill in making pottery, but he was a big thinker and attuned to the artistic tastes of the public. By 1871, Henry Doulton launched a studio at the Lambeth pottery, offering work to designers and artists from the nearby Lambeth School of Art.  In 1877 Henry bought out Pinder, Bourne and Company, a pottery located in Burslem, Staffordshire, England. This placed him in the region known as The Potteries. Five years later he changed the name to Doulton and Company.

Henry fostered an artistic environment that encouraged individual expression, and  soon his workers made some of the most beautiful porcelains of the time. Not only did he hire women, but handicapped artists as well.

Henry was given the Albert Medal by the Royal Society of Arts in 1885 and was knighted in 1887 because of his contributions to the artistic life of England. In the late 1800s anyone who wanted to be in style owned Doulton items.

Sir Henry held off displaying the new Burslem porcelains at exhibitions until he was confident that he could show his competitors the best of his artists were cap-able of producing. At the Chicago Exhibition in 1893 he felt the public was ready for the new range. Large vases, including one which was 6 feet high, were modeled by Charles Noke' and painted by Charles Labarre, who had come to Doulton's from Sevres in France. Other items exhibited were floral painted dessert services and fish and game sets. The Doulton Works took seven of the highest awards, the most given to any ceramic firm.

Doulton's factory at Burslem produced a tremendous amount of tableware and beautifully decorated items, such as vases, ewers and plaques, all of high quality porcelain. It took the work of many skilled craftsman and women to accomplish this.

Notable artists such as Percy Curock, Daniel Dewsbury, Edward Raby, George White and, of course, Charles Noke experimented with glazes, including Changware, Chinese Jade, Sung, and Flambe'.

The Art Nouveau movement influenced many of Doulton’s artists in the late 19th century. In 1889, when Doulton recruited Charles Noke' from the Worcester factory as its chief modeler, many of his earliest pieces featured Oriental-style dragons in high relief. Vases and ewers had gilded dragon handles or molded dragons crawling up the sides. Dragons became an important part of Noke's work, especially when he began experimenting with the Chinese rouge flambe glazes in the early 1900s.

By this time Doulton had become known for its stoneware and ceramics, under the artistic direction of John Slater, who worked with figurines, vases, character jugs, and decorative pieces designed by the prolific Leslie Harradine. Doulton products came to the attention of the Royal family. In 1901 King Edward VII sold the Burslem factory the Royal Warrant, allowing the business to adopt new markings and a new name, Royal Doulton. The company added products during the first half of the 20th century while manufacturing fashionable and high-quality bone china.

Early Doulton artists frequently used nature as their theme, befitting the Art Nouveau style. Flowers were a very popular subject, usually done in muted colors outlined in gold. They also used animals, especially farm animals such as cows and goats, to decorate vases and other items, many with hand-painted landscapes.

In the first few years of the Burslem factory, some unique, very fragile pieces were made with colorful applied seashells or flowers, vines and leaves in an effort to duplicate some of the Amphora pieces made in Austria during that time. Some of these pieces are still in existence today and are eagerly sought by collectors.



During the late 19th century, when the Burslem craftsmen were producing their wares, many competing potters from the Worcester, Royal Bonn and Rudolstadt factories were also producing similar pieces. All of them employed the Spanish Ware technique—the  painting of very fine raised 22-karat gold outline traceries of flowers and leaves, combined with on-glaze enamel painting, often on an ivory or vellum ground. Many pieces had elaborate gilded scroll handles and three or four feet. Some rare pieces even had sections of reticulation.

Many of the cups and saucers from tea, coffee and chocolate services were very delicate in nature and also painted in muted colors using flowers as a theme. Much use of gold was used to decorate the cups and saucers, not only to outline the flowers, but the handle and trim were almost always done in gold. Doulton did a series called Blue Iris. The majority of the pieces in this line used blue flowers on a cream background, embellished by much gold tracery.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about Colonial America in the Spring 2018 Edition, "Early Americana," online now.