A Pen in Hand

QUESTION: I was going through some drawers in an old desk and came across a couple of fountain pens. I wondered if they’re collectible. Also, what can you tell me about their origins. I’m young enough not to have ever used one.

ANSWER: Technolgy has changed our lives a lot in the past 75 years—that marked the date in 1939 when Lizlo Biro, a Hungarian proofreader, first patented the ballpoint pen. It was also the year the 1939 New York World’s Fair offered a vision of the future to thousands of people. Up to that time, the main writing implement that people used was the fountain pen. And it was 108 years before that when John Jacob Parker patented the self-filling fountain pen, paving the way for an easier way of writing.

But it was three inventions that occurred in the mid-19th century that helped the average person accept the fountain pen—the invention of hard rubber, which replaced steel for pen cases, iridium-tipped gold nibs for increased flexibility, and an improved ink formula which contained less sediment.

However, it wasn’t until Lewis Waterman created his Ideal Fountain Pen that the public embraced the fountain pen. After his Ideal Pen became a success, Waterman patented the coiner mechanism where a slot in the heel of the pen enabled a coin to deflate the internal pressure plate.

Probably the most well known of all the fountain pen companies was the Parker Pen Company. George Parker started the Parker Pen Company in Janesville, Wisconsin., and patented his “Lucky Curve” ink feed system in1894. His design allowed the ink to flow back into the reservoir when the pen was upright, reducing the possibility of leaks, creating a new industry standard. He patented an improved version in 1911. You could purchase one of his pens back then for $2.50 to $6. He even made one the size of a  penknife, suitable for a lady's purse.

The Parker Pen Company was an innovator and came out with several firsts, including a safety screw-on cap and the button-filler. An alternative to using an eye-dropper to fill the ink, the button-filler used an external button which connected to the internal pressure plate and deflated the reservoir when pressed.

In 1921, Parker introduced the Duofold pen line. These pens were available in Oversize, Litty, or Junior models, and came in red or black rubber—previously, all rubber pens came only in black. The company added other colors, such as lapis lazuli and jade green, later on in the decade. Originally priced from $5 and up, today these pens, especially the red ones, sell for around $1,000.

Parker continued to be innovative in the 1930s with the introduction of the vacuumatic filler, which worked with a plunger and allowed the entire barrel to act as a reservoir. Some pens also featured a transparent window so the user could see how much ink remained in the barrel. Prices ranged fro originally ranged from $5 to $10.

The next most well known of the fountain pen companies was the Sheaffer Pan Company, which began in 1912 in a small back room of a Fort Madison, Iowa, jewelry store with just seven employees. Its founder, Walter A. Sheaffer; was 45 years old when he risked his life savings to start the company, but his invention of a lever-filled fountain pen quickly proved to be the leader in the industry.

Shaeffer's mechanism used an external lever which depressed a flexible ink sac, but fitted flush with the barrel of the pen when not in use. For the next 40 years, the lever-filler was the most popular design in fountain pens.

In 1920, Sheaffer introduced its Lifetime pen which came with a serial number and a life-time guarantee. A white dot on the pen clip distinguished the pan. Selling for $8.25, they cost almost double what Sheaffer's other pen did. Nevertheless, people bought them. 

Sheaffer continued to influence the pen industry with its introduction of the Radite, the first plastic pen, in 1924---one of your pens. Originally available only in Jade Green in an Art Deco design, it eventually inspired a variety of additional colors.

Over the next 28 years, Sheaffer brought out several other significant products, including a fast-drying, non-clogging formula ink called Skrip, the Balance pen, a bullet-shaped pen designed to balance in the hand, the Crest, the first pen to use a plastic body with a fitted metal cap, the Touchdown, a pneumatic- filling pen, and the Snorkel, a longer edition of the Touchdown.

The introduction of the Pen for Men, an oversized version of the Snorkel, in 1959 put the company way ahead of its competition—indeed, way ahead of its time. Unfortunately, the public didn’t buy it and production ceased within a few years. However, oversize pens came into vogue during the 1990s, so the company produced the Legacy, a pen based on the original Pen for Men.

Even though most people don’t used fountain pens for everyday writing, they offer a bit of nostalgia and a remembrance of days long past.

Woven Beauty

QUESTION: I recently purchased a wicker table at an antique show. It doesn’t have any markings and the dealer who sold it to me couldn’t tell me much about it. I love this piece and it now occupies a prominent place in my den. Can you tell me anything about it? And can you also tell me a bit about the origins of wicker in general.

ANSWER: Wicker has been around for quite a while, but your table originated during the peak of its popularity. Back then, the ornateness of wicker brought an element of taste to middle-class American homes.

Back in the 17th century, the Dutch made wicker and brought it to England before sailing across the Atlantic to the New World. For the next several centuries objects made of wicker imported from Europe decorated American homes.

Until the 1850s, furnishings were inexpensive and serviceable, therefore easily disregarded. Then through a changing cultural, economic, and social conditions, wicker became a status symbol for America's rising middle class.

Although the mass production of wicker began in America, the main materials used in its manufacture—cane and reed—came from rattan palms, which grew wild in Asia. In the early 1840s, Cyrus Wakefield, a shrewd young Yankee grocer, noticed huge quantities of rattan being discarded around the Boston docks after serving as packing material to protect cargo on clipper ships returning from Asia. Discovering that chairs and tables could be made more cheaply from this strange material than importing finished pieces, he began making small pieces of furniture using this discarded rattan.

In 1873 he founded the Wakefield Rattan Company in Wakefield, Massachusetts. By the end of the decade, his firm accumulated sales of over $2 million. At its peak, his  company employed 1,000 workers in 30 buildings in Wakefield and another 800 in  Chicago.

Wakefield's successes encouraged Heywood and Brothers Company, wooden chair makers in Gardner, Massachusetts, to begin making wicker furniture in 1876. For the next 20 years, the two companies competed fiercely and dominated the industry.

Both companies responded to economic prosperity following the Civil War which enabled middle class families to leave America’s dirty, crowded cities for clean, airy suburbs, prompting a demand for wicker furnishings. These light, airy pieces were ideal for the new gabled and turreted Queen Anne-style homes and for the verandas of resort hotels catering to the new vacationing middle classes.

Because it was easy to keep clean, wicker attracted those concerned about sanitation, and its lightness, adaptability and design potential, Victorian tastemakers loved it. Wicker not only satisfied those with good taste but did it at an affordable price.

When the Aesthetic Movement swept America in the 1870s, stressing the uplifting moral and spiritual influence of artistic decors, tastemakers recommended the use of ornamental wicker in people’s homes. This emerging middle-class interest in aesthetically correct furniture encouraged Wakefield and other manufacturers to create increasingly ornate pieces that people associated with art and beauty. Fancy wicker enhanced the ostentatiously overdecorated Victorian parlors and expansive porches while proclaiming the taste of its owners.

Curling, shaping and twisting pliable lengths of wetted reed into whimsical scrolls, spirals, and whirlygigs, skilled craftsmen fed the Victorian fever for more exotic wicker objects. They incorporated a variety of astronomical and botanical forms, flags, Oriental fans, shells, and ships into their elaborate designs. Two of the most unique pieces was the tete-a-tete, in which two people could sit side by side or the serpentine "Conversation Chair,"  in which a courting couple could sit facing each other.

Elegant tables were important to the decor of Victorian homes. With its intricate grid of legs and embellishments, fancy skirt and caned top, a square table would have added grace and utility to its owner's room.

The growing demand for more elaborate forms reached its peak during the 1890s, when American wicker became more fanciful and ostentatious. A good example is the "Fancy Reception Chair,” featuring intricate tiny scrolls and frilly curlicues. Often designed as show pieces for elegant parlors rather than for actual use, these ornate chairs are fairly hard to find today and often sell for upwards of $1,000 in good condition.

By the turn of the 20th century, Victorian ornate design faded in favor of simplicity. Design reformers instead promoted the "Bar Harbor" style, simplified wicker furnishings with wide open, diagonal latticework that would fit plain, open interiors.

Just before World War I, the Arts and 'Crafts movement inspired American wicker   manufacturers to create boxy, unornamented shapes ideal for the minimalist interiors of bungalow homes. Arts and Crafts leader Gustav Stickley produced a line of square and severe willow furniture using geometric designs. However, by the  beginning of the Great Depression, wicker was all but dead in America.

Fragile as Lace

QUESTION: My mother always liked decorative glass. She had an eclectic collection, some of which was Depression Glass. I now have her collection, but I know little about glass and almost nothing about Depression Glass.  I have four plates that I particularly like. Each has a pierced rim. Can you tell me anything about them?

ANSWER: Your plates are a pattern known as Old Colony, made by the Hocking Glass Company from 1935 to 1938. Back then your plate sold for only 10 cents at stores like F.W. Woolworth’s 5 and 10 Cent Stores.

When the Great Depression began, glass makers began producing inexpensive, colored translucent glass ware, which they sold for 5 and 10 cents. Some food manufacturers and distributors, such as the Quaker Oats Company, put pieces of Depression glassware in boxes of food as an incentive to purchase. Movie theaters and businesses also handed out pieces to customers simply for coming in the door.

More than 20 glass makers, most located in the central U.S. where access to raw materials and power made manufacturing inexpensive, produced over 100 patterns, including  entire dinner sets in some patterns, and in a variety of colors—clear, pink, pale blue, green, and amber.

Collectors commonly call the Old Colony pattern “open lace” or “lace edge.” However, this can be misleading since other companies like Westmoreland, Duncan & Miller, and Imperial also made lace-edged Depression Glass.

Of all the patterns they produced, Hocking’s Old Colony is by far the most popular with collectors. It comes mostly in a deep pink and clear, also known as crystal. And all pieces have some sort of ribbing incorporated into their design. Other manufacturers also produced lace-edged glass but in a lighter pink. Color is an important element in determining various patterns of Depression Glass since no mark appears on glass as with china. Hocking (later Anchor Hocking) eventually did embed their logo into the bottom of their glass pieces, but not their Depression Glass.

While all Old Colony pieces are open lace, not all open lace pieces are Old Colony. A variety of companies made lace-edged pieces in shapes and colors that are different from Old Colony. The Lancaster and Standard Glass Companies, both of which came under Hocking's control in 1924, made some open lace pieces in the late 1920s and early 1930s which were similar in style and shape to Old Colony.

Some people collect only Old Colony pieces. Others, who like the open lace style, find other companies' pieces complement` their Old Colony collections, especially pieces that don’t come in the Old Colony pattern, such as sandwich plates.

To sort out the various patterns, colors, and manufacturers of Depression Glass, collectors usually consult guidebooks on the subject. However, the information from one guidebook to another can be incorrect or misleading. For instance, in some books, luncheon plates list as measuring 8¾ inches in diameter while the less common and more expensive salad plates measure 8¼ inches. But, in fact, the salad plate actually measures only 7¼ inches. And while there’s an 8¼-inch plate, it’s the luncheon plate. Plus, there are no Old Colony plates sized between the 8¼- inch luncheon plate and the 10½-inch dinner plate.

This confusion can be especially problematic on auction sites like eBay where dealers don’t always do thorough research of their wares. The Old Colony salad plate usually sells for around $22  on eBay while the luncheon plate sells for $13-15. And even though this isn’t a huge difference in price, collectors often pay the higher amount for a luncheon plate if they really want it. The true salad plates, measuring 7¼ inches, are much less common than the 8¼-inch luncheon plates.

Old Colony pieces can also be found in frosted glass. These sell for half of what unfrosted pieces do, so collectors can buy and collect frosted pieces for half the price, especially for the more expensive ones.  
                               
An unfrosted console bowl in mint condition, for instance, lists for over $200. This howl, which measures 10½ inches across and sits on three legs, sells for $25 on eBay in its frosted edition.

But there’s a downside to collecting Old Colony. The lace edging chips and cracks easily on all lace edge pieces. Many of the more unique pieces have chips. Unfortunately, the supply of Old Colony, as with other unusual patterns of Depression Glass, is drying up as collectors have amassed collections which has taken a lot of it off the market.

And All That Chintz

QUESTION: My grandmother left me quite a few beautiful pieces of china, decorated with floral patterns. What seems like the pattern name appears with the mark on the bottom of the pieces. Names like Summertime, Royalty, Florida, and such are common among them. Can you tell me anything about this china? I really like its bright, happy decoration and would like to collect more of it.

ANSWER: The pieces that you have, which are actually pottery not china, are known as chintz. Made from earthenware, they’ve become one of today’s most popular collectibles.

Chintz dates back to the 18th century when English merchants imported exotic fabrics with elaborate floral patterns from India. By the early 19th century, Staffordshire potteries began to emulate these patterns on the decorations of their wares, using large flowers and exotic birds. By the 1820s many potteries in the Staffordshire area manufactured chintz for everyday use. Although they produced many Victorian patterns, today's collectors prefer the chintz made from the 1930s to the 1950s.

The four major companies making chintz back then—Grimwades Royal Winton, James Kent, Crown Ducal, and Lord Nelson—needed a product that was cheap to produce so that their chief market, the English middle class, could afford it. Since they made chintz from earthenware and decorated it with lithograph transfers, it filled the need nicely. All together, there are over 200 different patterns of chintz.

The decoration of chintz required an amazing amount of handwork and skill since women transferred the designs by hand from lithographs on to the individual pieces. The process, which was similar to applying a  decal, required meticulous cutting and matching to ensure that the junctures of each piece were practically invisible. Other workers gilded each piece by hand before firing.

During the 1930s, the companies producing chintz, in ever-increasing competition, introduced fresh new patterns and shapes at the British Industries Fair. In order to come up with these new patterns, some  reversed the foreground and background colors. One of the leading manufacturers, Grimwades Royal Winton, changed their Welbeck with yellow background into Hazel with black ground and their Spring background into white. Companies often often named their patterns for the flowers in them and incorporated them into the backstamp or mark.

When World War II broke out, the British Government forbade all unnecessary manufacturing, so chintz production halted. After the war, people became starved for color and the chintz produced in the 1950s had a different look, with flowers larger and farther apart. Makers also changed background colors to  black, burgundy and navy.

But in the late 1950s tastes changed, and housewives’ preferences turned to modern Scandinavian design in furniture and accessories. The fussy chintz patterns clashed with the new decorating tastes, and most chintz production came to an end. It wasn't until the 1990s that interest in cozy, comfortable chintz returned.

Of all the chintz manufacturers, collectors deem Grimwades the “Cadillac of Chintz.” It produced over 60 different patterns from 1929 through the early 1960s.

In 1885 Leonard Grimwades founded the pottery with his brother at Winton Pottery, Stoke-on-Trent. They started production in a simple shed and expanded rapidly, taking over the Stoke Pottery in 1900. They introduced the first modern chintz pattern, called Marguerite, in 1928. In 1932, they came out with their Summertime pattern which immediately became immensely popular. Grimwades applied this pattern to many different articles, including clocks, invalid feeders, and jardinieres, and shipped large quantities of it to the U.S. The company awarded Wright, Tyndale and Van Roden Inc., a luxury store in Philadelphia, exclusive rights to Floral Feast, Somerset and Summertime. However, many of these pieces bear only the store’s stamp. The cup and saucer in your photo bears this pattern. Throughout its history, Grimwades produced nine chintz patterns, more than any other company.

In 1915, Albert Goodwin Richardson bought the Gordon Pottery in Tunistall, England and renamed it the A.G. Richardson Ltd. He wanted to produce good quality earthenware under the name Crown Ducal. In 1919 he sold his interest to Harry Taylor who owned a lithograph company. Crown Ducal wares also appealed to Americans during the late1920s through the 1950s.

Richardson developed a deep ivory glaze base color in 1931, and a number of chintz patterns employed it, including Pansy, Peony, Primrose, and Priscilla. In 1980, the Wedgewood Group purchased the  company and renamed it Unicorn Pottery.

James Kent took over the Old Foley Pottery at Longton. in 1897 and renamed it James Kent Ltd. to produce earthenware for the English middle class. He first produced the chintz pattern DuBarry in 1934, and it remained in production until 1980. The most popular Kent pattern is Hydrangea with a white background. The quality of James Kent wares is inferior to Grimwades, and prices are somewhat lower.  M.R. Hadida Fine Bone China Ltd. Bought the company in the 1980s.

Another factory turning out great quantities of chintz was Elijah Cotton's Lord Nelson ware. The firm Elijah Cotton Ltd. operated at the Nelson Pottery in Hanley from 1889, making mostly kitchen and hospital ware. Their chintz earthenware is chunky in shape and poorly decorated. To avoid having to hire skilled decorators, they purposely didn’t decorate the spouts and handles of their teapots and jugs. Black Beauty and Green Tulip are their most popular patterns.

Today’s collectors include tea and coffee pots, whole tea sets, bud vases, and serving pieces in their collections. Some focus their collections on a single pattern while others mix and match designs. Still others collect only tea cups in as many patterns as possible.

Are All Cast-Iron Toys Alike?

QUESTION: I’ve recently become interested in collecting cast-iron toys. But there seem to be so many new ones out there, it’s difficult to tell the difference between the new and the old. Can you give me some pointers on what to look for? I believe it would be easy to get ripped off when buying toys for my new collection.

ANSWER: You have to be very careful when buying cast-iron toys. Even knowledgeable dealers often can’t tell the difference between new ones and old ones. And if you’re buying them at auction sites online, you need to know a few things to prevent yourself from getting ripped off.

Cast iron was the 19th-century equivalent of today's plastics—it was cheap, could be made in almost any shape, and identical pieces could be mass-produced in molds. Unfortunately, those reasons are why so many toys get reproduced in cast iron. Although manufacturers produce new cast iron toys in the same way as originals, there are certain differences between originals and reproductions.

Foundries make most cast-iron toys using a method called sand casting which begins with a full-sized, three-dimensional model or master pattern which the foundry worker pushes into the sand to make an impression. Some foundry workers place the master pattern in a wooden box, or casting frame, then pack fine sand, called casting sand, around the pattern. Each mold requires two frames—one frame for the top half of the mold and another for the bottom. Most makers use brass or bronze masters for toy molds for better detail and longer life.
                           
The worker locks the casting frame halves together, then pours molten iron into the mold. The iron runs into the hollow impression and forms a copy of the master pattern. After cooling, he separates the frames and removes the cast piece for finishing. Most foundries use sand molds only once since the impression deteriorates when the worker pours iron into it. However, some can be used several times. The number of times a mold can be used depends on the skill of the worker, the complexity of the master pattern, and the level of quality acceptable in the finished casting.
   
Two other basic sand-casting terms—runner and gate—can help determine when the casting occurred by the marks they leave. A runner is a channel running through the mold which feeds molten metal into the individual castings. The gate is the point where the runner castings branch off into the casting.

The casting sand also allows for several important differences between new and old cast iron toys. Casting sand used in original molds was generally finer than the casting sand used today. This means that old cast iron almost always has a smoother surface than new castings made with coarser sand. The surface of old cast iron both looks smooth and feels smooth to the touch—something that’s impossible to tell when purchasing cast-iron toys online. New cast iron usually has small prickly bumps that rise above the surface and holes or pits that go below the surface. The rough texture is the most obvious on unpainted surfaces, such as the inside or underside of toys.

A second major difference caused by the casting sand is the amount of detail in new and old toys. The finer the sand, the tighter it could be packed around the master pattern, which transferred more and smaller details to the mold. Old castings almost always have sharper lines and more detail while newer ones are less sharp, blurred, and lack the fine details found in old pieces cast with finer sand.

Makers of reproductions, on the other hand, use actual antique toys as master patterns or copies of original toys or copies of copies. Cast iron shrinks 3/32  to 1/8 of an inch per foot between mold and casting. This means each time a maker copies a piece a certain amount of distortion occurs which results in loss of detail. Even if the foundry worker takes apart an older piece and uses it as a pattern, the reproduction will be smaller than the original due to normal shrinkage.

Another difference between old and new cast iron toys is the amount of hand finishing. Almost all old pieces had at least some hand finishing, while most reproductions have none. Evidence of this occurs in matching halves of original cast iron toys which makers fitted together by hand filing or at least had the edges tumbled smooth in a machine: This extra attention to fit produced a tight seam in original cast iron toys.

On the other hand, the seams in new cast iron are often loose, with 1/8-inch gaps or more. Worker’s perform what little finishing they do on reproductions with modern high-speed production tools, which leave obvious grinding marks. Whenever these marks appear, especially if they’re bright and shiny with no patina, it pretty much guarantees the piece is a reproduction.

The way decorators painted old and new toys is another indication of age. They used fairly heavy oil-based enamel paint on older ones and much thinner paint, usually a water-based acrylic, on newer ones. Also, they usually dipped the older cast-iron toys, rather than used a brush to apply the paint. Today, decorators use air-powered spray guns to speed production.

The use of thicker paint and the heavier coatings of paint produced by dipping produces a distinctive wear pattern in original painted cast iron toys. Dipping also leaves paint on surfaces that are hard to reach with a spray gun, such as inside surfaces, hidden angles, and along the edges where seams meet. Toy banks, for example, usually show paint on both inner and outer edges of the coin slot. Likewise, old paint around a coin slot should show the typical ragged paint chips which would occur with normal wear.

New, thin paint on reproductions doesn’t chip even if deliberately gouged.  Most chips in old paint also show different layers of rusty brown or black which appear in the order the decorator applied them.

Even unpainted, old cast iron appears a different color than new cast iron. Old iron usually looks dark brown or even black, while new cast iron is typically gray or a dirty silver color.

In Memory of Comrades in Arms

QUESTION: Recently, I purchased an interesting medal and ribbon at an antique show that the dealer  told me was from the late 19th century. The medal, made of what seems to be white metal, hangs from a fairly well worn red, white, and blue silk ribbon and says G.A.R. 24th Encampment,  Boston, Massachusetts, 1890. Can you tell me anything about this? What was the G.A.R.?

ANSWER: You have a Grand Army of the Republic (GAR) Badge from one of the organization’s annual conventions, known as encampments. These encampments took place in different cities beginning in 1866 and ending in 1949. The First National Encampment convened in Indianapolis, Indiana, on November 20, 1866 while the last or 83rd National Encampment took place in Indianapolis, Indiana on August 28, 1949. Sixteen members attended.

Dr. B.F. Stephenson founded the GAR in 1866 in Decatur, Illinois, to advocate and care for Union Civil War veterans, widows and orphans. Brothers, fathers and sons had marched off from towns and cities in July 1861, proud, excited, and dedicated—most without a clue as to what they were getting themselves into. Over one million of them died—more than in all the other wars the U.S. engaged in up to that time. And those who did return were often maimed for life.

The GAR was a fraternal organization composed of veterans of the Union Army, US Navy, Marines and Revenue Cutter Service who served in the Civil War. Linking men through their experience of the war, the GAR became one of the first organized advocacy groups in American politics, supporting voting rights for black veterans, lobbying the US Congress to establish veterans' pensions, and supporting Republican political candidates. It dissolved in 1956 when its last member died.

Veterans had developed a unique bond during the Civil War that they wished to maintain, a trusting companionship and a sentimental connection they kept by joining veterans' organizations. At the end of the Civil War the individual was inconsequential, and the U.S. Congress needed some prodding to enact legislation to take care of veterans. These veterans' groups were instrumental in getting appropriate legislation passed.

Though many veterans groups organized after the Civil War, the GAR became the most powerful. By 1890, it had 490,000 active members. Five U.S. presidents came from its ranks as well as many senators and representatives. At one time, no doubt due to the political pressure of GAR constituents, one-fifth of the national budget went to soldiers pensions. The GAR founded soldiers' homes for the permanently disabled and was active in relief work.

According to chroniclers of the 24th National Encampment in Boston, in 1890—from which this badge originated—the GAR had, by then, established orphans homes in seven states, preserved Gettysburg as a national battleground and given more than $2 million in charity to veterans and their families whether or not they were members of the GAR. For a time, it was impossible to be nominated on the Republican ticket without the endorsement of the GAR.

Civil War veterans controlled a lot in this country and had a strong political voice. Among other things, they used their political influence to see that Congress adopted May 30 as Memorial Day.

To honor the deceased, veterans would decorate graves of their fallen comrades with flowers, flags and wreaths, so people referred to it as Decoration Day. Although Memorial Day became its official title in the 1880s, the holiday didn’t legally become Memorial Day until 1967. In 1977, Congress moved Memorial Day to the last Monday of May to conform with the Uniform Monday Holiday Act. In December 2000, Congress passed a law requiring Americans to pause at 3 P.M. local time on Memorial Day to remember and honor the fallen.

The tradition of having picnics on Memorial Day actually began on May 1, 1865 in Charleston, South Carolina. The Confederates had used the horseracing course there as a Union prisoner-of-war prison. When the war ended and the Confederates evacuated the grounds, a large group of former slaves re-interred the Union soldiers’ bodies who had died there and erected a white fence with a large arched gate, above which they mounted a sign, “Martyrs of the Racecourse.” When they finished, they broke up and moved to the infield to hold picnics. And thus began this national tradition.



Delegate badges from the GAR’s National Encampments have long been a collectible. First created after the 1883 encampment in Denver, Colorado, and handed out annually until the last Encampment in 1949 in Indianapolis—except in 1884 when there wasn’t any badge—these “ribbons of honor” were created and furnished by the city that hosted the event. They reflected the city itself, including local history and state symbols as well as an image of the current Commander-in-chief.

Badges came in several varieties. There were the official ones, commissioned by the host city and given to all delegates, past delegates and members of allied organizations, such as the Sons of Union Veterans of the Civil War, the Women's Relief Corps and the Ladies of the Grand Army of the Republic, as well as later, the Daughters of Union Veterans, and there were the semiofficial staff badges and souvenir badges. There were also testimonial badges, given to past Post officers at the end of their service period. These had horizontal rank straps with one or more stars on them and were often made of 14 or 18K gold and studded with diamonds.

In addition to the National Encampment badges, there were two-sided Post badges, with one side red, white and blue and the other in black with the words "In Memoriam," to be used when a member died. There were other unique Post badges as well, including those with a detachable metal top piece from which hung a large metal star or disk. And since Posts ordered new ones every few years, there are many variations in badges from each Post. Veterans wore Post badges to funerals, Memorial Day programs, and Fourth of July parades, among other events.

Some collectors specialize just in Department or state badges. Each state incorporated its flower, animal, or symbol into its badge design. So the Massachusetts badge featured a pot of beans, New Hampshire had a piece of granite on it, and Ohio badges had a picture of a buckeye. Each Department also had special delegate badges arid ribbons. The colors of ribbons, usually made from silk, varied, also. Department badges had red ribbons, Post badges had blue ribbons; and National badges always had a yellow/buff ribbon.

The Stevens Company of England produced the finest GAR ribbon badges, often referred to as Stevensgraphs. These portrait silks have extremely fine detail. Other companies, such as the B.B. Tilt Co.,. the United States Badge Co. and the Son of Paterson (N.J.) all made badges, but these aren’t as easily identified or as finely made.

The Quest for Polar Knowledge

QUESTION: I’m a watch repair person. Recently, a rather unique 24-hour watch came across my counter for a new band. I’ve never seen one like it before and wandered if you could tell me more about it. The dial has what looks like a map of Antarctica on it and all the lettering seems to be in the Russian Cyrillic alphabet. Also, the dial has some writing in red on it.

ANSWER: What you have is what’s known as 24-hour Russian Raketa Polar Watch.  They’re often described as Raketa watches.

The Petrodvorets Watch Factory, the one that produces Raketa watches, is the oldest in Russia, founded by Peter the Great in 1721. The Nazis destroyed it during the Siege of Leningrad, but the Soviets rebuilt it in 1944. Since 1961, the factory has been producing watches under the brand “Raketa,” meaning “rocket,” in honor of Yuri Gagarin, Russia’s first astronaut and the first person in Space.

Today, the Petrodvorets Watch Factory, still located in its historic building in St. Petersburg, Russia, is one of the rare watch factories in the world that makes its own movements, including the hair spring, balance wheel, and escapement. In 2009, the company modernized its production with equipment purchased from the Swatch Group in Switzerland.

Often these watches don’t look like Petrodvorets produced them. However, they were often assembled from Raketa parts—probably everything except the dial. Most of the online auction listings say they were "handmade" in Russia. And, for the most part, that’s true. But being part of "Old stock" refers more to the parts than to the complete watch.

In the 1950s and 1960s, it was common for smaller workshops in the Soviet Union to produce these watches using Raketa parts. Different Polar, Arctic, and Antarctic models originated from this time. These “fakes” were essentially assembled from whatever parts the makers could find. Supposedly Petrodvorets’ workers during the Soviet Era would produce Raketa watches with modified dials on their own after hours. This continued until 2009, when new owners took over the company.

The majority of Raketa watches were actually produced in the original Petrodvorets factory by original Raketa masters using original Raketa parts. What they modified, if needed, was the dial. These Raketa masters had the tools and knowledge to produce special dial watches.

This watch is one of those special dial watches. It commemorates the first Soviet research expedition to Antarctica in 1956. But must have been produced after the fact since Yuri Gagarin didn’t go into space until April 12, 1961, if in fact it is a Raketa watch.

Russian explorers Fabian Gottlieb von Bellingshausen and Mikhail Lazarev, sailing on the ships Vostok and Mirny, first sighted a continental ice shelf in Antarctica in 1820. The continent, however, remained largely neglected for the rest of the 19th century because of its hostile environment, lack of resources, and isolation.

The first Soviet contact with Antarctica came in January 1947 when the Slava whaling flotilla began whaling in Antarctic waters. But it wasn’t until The Soviet Antarctic Expedition, or Sovyetskaya Antarkticheskaya Ekspeditziya, part of the Arctic and Antarctic Research Institute of the Soviet Committee on Antarctic Research of the Academy of Sciences of the USSR, that the Russians explored the interior of the continent to the South Pole.

The Soviets established their first Antarctic research station, Mirny, near the coast on February 13, 1956. In December 1957, they built another station, Vostok (also the name of Gagarin's space capsule), inland near the south geomagnetic pole. The Fourth Soviet Antarctic Expedition used three large tractors and four sledges on the journey from Vostok to the South Pole, and it’s this expedition that this watch commemorates. The words in red on the dial state “The Soviet Antarctic Expedition,” or “Sovyetskaya Antarkticheskaya Ekspeditziya” in Russian.

In 1959, twelve countries signed the Antarctic Treaty, prohibiting military activities and mineral mining, prohibits nuclear explosions and nuclear waste disposal, supports scientific research, and protects the continent's ecozone. As of today, forty-nine nations have signed the treaty. More than 4,000 scientists from many nations now conduct ongoing experiments in Antarctic life and climate change.

Linking the Past With the Present

QUESTION:  I purchased a pair of antique finger pronged cufflinks stamped, "Pat. 2 Dec. 1884" a while back on eBay. Can you tell me more about these cuff links?  The cuff links are finger pronged and clearly marked on the back, "Pat. 2nd Dec 84" although there’s no brand name. I did some research and found out that finger prongs first came into style in 1885, so I presume the date is 1884. I also wonder about the carnelian. If it’s not stone, could it be molded glass?

ANSWER:  Cufflinks are one of the few accepted items in a limited line of men’s jewelry. No other collectible causes such an array of reactions. And this is precisely why so many people collect cuff links. Other reasons are their relatively inexpensive cost, easy storage, and availability. A search through virtually any antiquing site attests to the seemingly endless styles, shapes and designs produced in the last 200 years.

Cufflinks, which are small, and spend most of their lives under coat sleeves or in drawers, are  pieces of adornment which have much to say about society and about the individual who wears them. They mirror the fashions, the economy, the manufacturing and the art of their era, usually  larger and more colorful in good times, smaller and more conservative in bad times.

Cuff links originated long ago as removable buttons for shirts and jackets. When buttons became mass-produced and cheap enough to sew onto the material itself, men used these little studs only at the cuffs. The variety of cufflinks increased dramatically with mass production techniques. Of course, the need for cufflinks increased, too. Every member of the peerage, as well as every business man who wanted to socialize in high society, had to wear "tails" at every dinner party and evening activity. And tails required a shirt with French cuffs.

The earliest cuff links date from the same period as the cuff-fastening slit. Handmade of various metals, usually gold and silver, and set with gemstones, they became a luxury for the wealthy.

Hand-casting and other manual jewelry-making techniques continued until 1840 to 1870 when three mechanical developments—the tour a’guilloche machine, the steam driven stamping machine, and electro metallurgy—opened up men’s jewelry to a much wider clientele. The French or double-cuff shirt sleeve also became a popular fashion accessory in the 1840s.

After 1840, cufflinks were affordable. Victorian lucky charms, hearts, flowers, love birds, ivy, love knots, angels, snakes, even babies found their way to cufflinks of the era. As did the horseshoe. Horse racing was a passion of Edward, Prince of Wales and many commoners apparently liked the idea of linking themselves and their shirt sleeves to royalty through this symbol.  Cufflink makers employed free-flowing whiplash lines, organic motifs and stunning, romantic feminine figures and faces during the Art Nouveau period.

The publication of Alexander Dumas’ novel The Three Musketeers in 1844 stimulated this new elegant touch in fashion, as detailed descriptions of the turned-back sleeves of the men guarding King Louis XIII inspired European designers to modify the single cuffed, link-holed shirtsleeve that had been the mainstay of English fashion since 1824.

The English middle class adopted cuff links during the reign of George IV, toward the end of the Industrial Revolution. Unable to afford gemstones, they turned to replicas of the real thing. Designers used “rhinestones” and pastes to represent diamonds, pinchbeck, a copper and zinc alloy, as a substitute for gold, and cut steel and marcasite as a substitute for silver.

Late Georgian and Victorian jewelers favored a rose or flat cut for real or fake gemstones. They typically used foil or paste, a type of leaded glass, for backings.

Reverse intaglio was also a popular way of embellishing 19th century cuff links. After carving a figure or scene in great detail into the back of a cabochon crystal, an artisan would carefully fill in the work with paint and apply a mother of pearl backing. Manufacturers used this elegant process almost exclusively for jewelry worn by men.

Cuff link makers used this same process to carve designs, often of classical gods, into carnelian, a brownish-red mineral, which gets its deep rust color from impurities of iron oxide in the silica mineral chalcedony, commonly found in Brazil, India, Siberia, and Germany. Used as a semi-precious gemstone, its color can vary greatly, ranging from pale orange to an intense dark rust.

Men favored enameled cuff links during the late Georgian period, but it was during the Art Deco period that enamels reached their peak of popularity. Metal decorated with baked enamel— colored lumps of glass ground into a powder with a mortar and pestle—has been an art form since the 13th century.

Manufacturers of the 1950s arid 60's frequently marketed cuff links in a series, for example pairs featuring cars, sports themes, and so on. Various caricature cuff links, images of sports, political and theatrical celebrities were also popular during that time. One interesting category of cuff link is the "do-ers" category. As. the name implies, cuff links in this category do something in addition to fastening. Nail clippers, thermometers, music boxes, and watches have all been built into the links.

But the front design on cuff links is only have of the story. Fasteners on the backs have their own intriguing history. Late Georgian fastening devices featured wire loops, curb chains and string. Makers introduced the dumbbell form earlier in the mid-Georgian period in the late 18th century. Small and in one solid piece, craftsmen carved the dumbbell from ivory in the early part of the 19th century and by mid-century, from pearl. Carved dumbbells had a slightly curved shank. They looked like exercise weights whose ends were too heavy for the bar. Dumbbells of glass, coral, gold, gold plate and various hard stones became fashionable by the 1890s.

A metal button fastener, circa 1880, looked like an oversized shirt stud. Another, the "one-piece link" from the 1890s, continues to be produced today. It has a metal face, slightly curved fastening device and a metal oval to hold it fast to the inside of the cuff.

The patent, dated 1884 on the back of these cuff links, most likely refers to the closing mechanism. By that time celluloid collars and cuffs were popular. And since they were stiff, cufflinks with that mechanism would have been very compatible.

Generally, cuff links backs can be classified into the following groups: Flipbacks are turn-of-the-20th-century on English and Scandinavian ones; chain-backs are 18th, 19th, and 20th century until the 1920s and usually look like a big “S” or a figure; spring-backs date from the 1930s, 1940s, and later. All Swank cufflinks feature this sort of clasp.

As far as brands go, cuff link manufacturers didn’t begin to mark there products until somewhat into the 20th century.

Many collectors tend to specialize in cuff links from a particular era such as Art Deco, Victorian, or contemporary. Some prefer to concentrate on a theme like animals, sports or automobiles, while others look for novelty pairs incorporating watches, music boxes or other devices. With so many styles to choose from, most collectors concentrate on one particular type. Some look for a particular material, like silver, Bakelite, wood or brass, while others look for military issue, fraternal emblems or a particular era. Still others search for unique fastening devices like snaps or springs.

For more information, go to Button Down a Collection of Antique Cuff Links .

Early 20th-Century Laptop

QUESTION: My aunt has an unusual box that opens out into what looks like a sloping writing service. I’d like to find out more information about it for her. Can you tell me anything about it?

ANSWER: Your aunt's box is what's known as a writing box. These date generally from the 19th century. Hers probably is from the last decade or two. Victorians carried these boxes with them on trips so they could write letters and postcards back home. When not traveling, many also used them in place of a desk. Essentially, they were the laptops of their day.


Writing boxes date back to the beginning of writing. Boxes in which writing materials were kept, called scriptoriums, were used by monks in the Middle Ages. Eventually, these were mounted on stands and later legs were added, creating the first desks for doing illuminated manuscripts. The writing box, itself, survived into the early 20th century.

People used traveling desks or writing boxes throughout the 19th century. When opened, they offered a leathered or velvet slope and rested on a table or over compartments for holding stationery. More luxurious versions included a removable pen tray under which spare nibs and holders could be kept, and screw-top inkwells, usually of glass, on each side. Others offered secret drawers or compartments. Though the origin of these remains obscure, they were most likely based on military dispatch boxes.

Towards the middle of the 19th century, manufacturers produced wooden writing boxes in enormous quantities to meet a growing demand. They came in all sizes and varieties of wood, including mahogany, burr walnut, rosewood and the more expensive ones in Coromandel wood. Less expensive ones, usually made of thin pine or fruitwood, were a step above an elaborate school pencil box and often decorated with cheaper decals instead of inlay..

Makers produced each to various specifications, depending on the intended type and amount of use. An army officer posted to the northwest frontier, for example, would want one robustly built, heavily brass bound, with brass mounted corners and edges to withstand rough treatment. A Victorian lady, on the other hand, might have one made in Tunbridgeware (a type of English marquetry decoration from the spa town of Tunbridge Wells, England) or even papier mache. The more expensive ones had serpentine lids, sometimes inlaid with intricate designs in brass or a mother of pearl or a shield for the owner's initials.

Simpler tourist writing cases in Moroccan leather and lined with satin came equipped with different sizes of stationery, pens, pencils, and a paperknife, but not an inkwell.

The utility of an easily portable box to provide storage for writing materials and a surface on which to write eventually led to the continuing usage of a smaller and more compact box that became very popular in the late 18th century. Known as lap desks or writing slopes, these writing boxes were quite portable, so they could be held on a lap or used at a table. They came with lids, hinged at the front, that slanted upwards towards the back, opening to form a writing surface with only one compartment underneath for storage.

Before the days of central heating, members of the family could gather by the fire and each work at his own small desk. A lap desk provided each individual with a private place in which to keep letters, paper and writing materials. In those days, ink, quills, paper, sand, wax wafers, and seals were all necessary equipment to use in writing a letter.

The writing box enjoyed its greatest popularity in days when ladies and gentlemen kept detailed diaries and wrote many letters. Imagine a romantic novelist or poet using just such a box while working in the warmth of a cozy fire. Today, cell phones, laptops, and tablets have made writing boxes and even stationery obsolete. However, as decorative boxes, they're more sought after than ever.

A Clock With Balls

QUESTION: When I was growing up in the 1950s, my parents had a colorful clock hanging on our living room wall. It had colored balls for the hours and stood out against the white wall. I had forgotten about it until recently when I discovered it, covered with dust, in the attic of my parents’ house as I was cleaning it out after my mother died. What can you tell me about this clock, and does it have any value or should I just give it the old heave ho?

ANSWER: Believe it or not, that dusty old clock is an icon of 1950s modern design. Often listed as being designed by George Nelson, the clock is shrouded in controversy. Yes, George Nelson did indeed play a part in its creation, but historians now believe that its actual designer was Irving Harper, who worked for George Nelson in his design studio.

The Ball Clock was the first of more than 150 clocks designed by George Nelson Associates for the Howard Miller Clock Company, which sold them from 1949 into the 1980s. Nelson Associates, first launched as a studio by George Nelson in 1947 in New York City, employed some of the most celebrated designers of the time, including Irving Harper, Don Chadwick and John Pile, all of whom contributed to the clocks.

George Nelson Associates, Inc., a leading home furnishings and accessories design studio, made modernism the most important driving force during the 1950s.  From his start in the mid-1940s until the mid-1980s,  George Nelson partnered with most of the modern designers of the time. His skill as a writer helped legitimize and stimulate the field of industrial design by contributing to the creation of Industrial Design Magazine in 1953.

Nelson became the Director of Design for Herman Miller, a leading industrial design firm, in 1947 and held the position until 1972. He used the money he earned in this position to open his own design studio in New York City. On October 26, 1955 he incorporated it into George Nelson Associates, Inc. and moved to 251 Park Avenue South. The studio brought together many of the top designers of the time, who were soon designing for Herman Miller under the George Nelson label. Among the noted designers who worked for George Nelson Associates were Irving Harper, George Mulhauser, designer of the Coconut Chair, Robert Brownjohn, designer of the sets for the James Bond film Goldfinger, Don Chadwick, Bill Renwick, Suzanne Sekey, John Svezia, Ernest Farmer, Tobias O'Mara, George Tscherney, who designed the Herman Miller advertisements, Lance Wyman, and John Pile.

But controversy was to cloud George Nelson’s success. In recent years, it has come out that many of the designs for which Nelson accepted credit were actually the work of other designers employed at his studios. Examples of this include the Marshmallow sofa, designed by Irving Harper, and the Action Office, the forerunner of the office cubicle and for which Nelson won the prestigious Alcoa Award, neglecting to mention that it was Robert Propst who actually created it.

It seems that Nelson believed that it was okay for individual designers to be given credit in trade publications, but for the consumer world, the credit should always be to the firm, not the individual.

Nelson’s company designed many wall and table clocks for the Howard Miller Clock Company, including the Ball, Kite, Eye, Turbine, Spindle, Petal and Spike clocks, as well as a handful of desk clocks. However, Irving Harper designed most of them. Howard Miller assigned numbers to all the original clock designs. The most famous, the Ball Clock, became Clock 4755. It was available in six color variations.

According to legend, the Ball Clock was designed by George Nelson, Irving Harper, Buckminster Fuller and Isamu Noguchi during a night of drinking in 1947. Its Space Age atomic look supposedly came from the an abstraction of the atom with its nucleus and particles.

A Furniture Re-Awakening

QUESTION: I recently purchased a mirror from an antique store in Thomasville, Georgia. The shop owner said the piece belonged to her grandfather, and she thinks the mirror dates back to the 1870's. I bought the mirror because I love the ornate carving on the frame. I'm also curious about the two round "stands" on the sides. Did people place candles on those platforms? What style do you think the mirror is? My best guess is Renaissance Revival.

ANSWER: You’re exactly right. Your mirror is in the Renaissance Revival style that was popular from 1855 to 1875. One of seven different revival styles prevalent during the Victorian Era, Renaissance Revival was an architectural style that easily made the transition from the custom, one-of-a-kind furniture shops in New York and Philadelphia to the mass-production factories of the Midwest.

Introduced in the early 1850's as a counter balance to the flowery Rococo Revival, Renaissance Revival borrowed elements from just about every furniture period since the 1400's. Originating in the French court of Napoleon III, the style soon took on a life of its own.

Furniture makers built pieces that consisted of an eclectic mix of 14th-century Renaissance, Neoclassical and 16th-century French derivation, based on a rectangular form with various embellishments.

While pieces of this style of furniture came in a myriad of shapes and sizes, they generally featured turned and fluted legs, raised or inset burled panels, heavily carved finials and crests, inset marble tops, and cookie-cut corners. On many mass-produced pieces, manufacturers added black and gold incising dn banding, and on finer, one-of-a-kind models, marquetry inlay and bronze or brass mounts. Most pieces of Renaissance Revival furniture were very large—ideal for the Victorian "more is more" philosophy. Makers of finer pieces preferred to use walnut, as it had been in the 16th century. And that was the most accurate thing about this revival style, which also borrowed heavily from the 17th-century Baroque and the earlier Gothic periods.

Prominent Renaissance and Neoclassical motifs such as columns, pediments, cartouches, rosettes, and carved masks, as well as plaques in porcelain, bronze, and mother-of-pearl became common types of decoration. Factory pieces had turned or cutout parts while finer examples featured carving or elaborate inlay of ebony and other exotic woods.

Before 1870 nearly all fine Renaissance Revival furniture came from small cabinetmaker shops in the East that made pieces to order. As the style gained popularity, furniture factories in the Midwest figured out how to mass produce the style for the Middle Class market. While some still used walnut, many chose to use cheaper ash or pine, painting it to look more high-style. The Renaissance Revival styles of the 1860s and 1870s marked the first time furniture makers used fine designs for mass-produced furnishings.

Large Midwestern factories, centered primarily in Grand Rapids, Michigan, manufactured pieces with turned and cut elements that could be produced more readily in volume and at lower cost. A few of the larger companies in Grand Rapids had committed to using the latest technology by the 1870's, among them Berkey & Gay, Nelson Matter and Phoenix. Renaissance Revival became the style of the Centennial Exposition and Grand Rapids was the star, but by that time it was already on its way out. The overpowering bedroom sets presented by Berkey & Gay cemented the reputation of the Grand Rapids factories as the manufacturers of bedroom sets or "chamber suites" as they became known.

New York cabinetmakers, such as Herter Brothers, on the other hand, produced pieces with elegant detail and elaborate inlays. They interpreted 16th- and 17th-century designs. And their motifs ranged from curvilinear and florid early in the period to angular and almost severe by the end of the period. Walnut veneer panels were a real favorite in their 1870s designs. Upholstery, usually of a more generous nature, was also often incorporated into this design style. Ornamentation and high relief carving included flowers, fruits, game, classical busts, acanthus scrolls, strapwork, tassels and masks. Architectural motifs, such as pilasters, columns, pediments, balusters and brackets, were another prominent design feature. Makers usually employed cabriole or substantially turned legs on their pieces.

The inevitable end came when the public desired to return to simplicity, the antithesis of Renaissance Revival, which embodied itself in the Arts and Crafts movement of the late 19th and early 20th century and the resurgence of interest in American heritage which presaged the coming, and long running, Colonial Revival period.

Renaissance Revival furniture, while not the most favored by many of today's collectors because of its size and obvious statement, nevertheless played a pivotal role in American furniture history.

Collecting the Golden Arches

QUESTION: My kids have all grown up. Recently, as I was going through some boxes in my attic, I noticed one filled with little toys that my children received in McDonald’s Happy Meals. Are these of any value as collectibles?

ANSWER: The answer is yes, but...and there’s always a “but.” To be of any value to a collector, Happy Meal toys need to still be encased in their packaging and not used. There are some rare pieces that have value even if out of their packages, but generally, as with other toy collectibles, mint in package is the rule.

McDonald's collectors aren’t simply food groupies picking up recent Happy Meal toys. Collecting McDonald's memorabilia can be a complicated affair. Categories are numerous and subcategories extensive. Items can be instantly available or hard to find. Prices range from a couple of dollars to thousands. As with any collectible, the law of supply and demand rules.

McDonald's memorabilia encompasses a vast amount of local, regional, national, international material-ephemera, advertising and print items, cross-collector character items, McDonaldland character items, restaurant pieces, books and comics, sports and non-sports cards, glassware , and plates, watches and jewelry, garments, vehicles, dolls, toys, and more. The list is almost endless.

The McDonald brothers started their fast food drive-in restaurant in 1948, so an item from the early 1950's  could carry a hefty price tag.

A novice McDonald's collector could amass hundreds of Happy Meal toys in a very short time.. For example, nearly 90 different toys had been in Happy Meals in 1996 alone, and millions of each toy had been issued. You can easily find toys from recent years selling for one to two dollars. A manufacturing variation or recall may create a toy of a little higher value, but even these are available in quantity.

Happy Meal toys and related display memorabilia remain are the most popular items to collect. Each Happy Meal has a specific and variable number of toys, including a special U3 toy which meets special standards for children under three years age, some bags or boxes, a stand up display and possibly counter displays, as well as banners, posters, and signs.

McDonald's collectors are as fussy about cleanliness, condition and completeness as any other collectible collector. Since McDonald’s had many of the items produced in the millions, prices for most packaged items remain low, and the package must be perfect. Loose Happy Meal toys have little value, especially once they’ve been tossed in a box, as the paint rubs off and are lost. Paper items need to be pristine and unmarked to bring top dollar.

Figurine Happy Meals toys are the most popular, especially those which feature well-known characters. Special packaging can also increase the desirability. The April 1996 Walt Disney Masterpiece Home Video Collection Happy Meal is a McDonald’s collector’s Holy Grail—eight nicely made classic figures, each in a fitted half-size videotape box, with well designed color cover artwork and McDonald’s logos. Dumbo is the U3 toy in the set. A single Happy Meal bag completes the set.

Happy Meals which feature books, buckets, or. little-known characters are usually of lessor interest to collectors, but there are exceptions. The four small soft cover Beatrix Potter Peter Rabbit books from a 1998 Happy Meal, in mint condition, complete with the Happy Meal box are worth about $80 as a set. The Peter Rabbit Happy Meal was a "regional" which had limited geographic distribution. Any books that have been in children's hands are hard to find unblemished. Usually, this happens moments after opening the package as little ones’ hands are often sticky from eating fries and the like.

Elusive, scarce items can bring big dollars. The growing interest in fast food collecting has helped many wonderful older items to surface. However, many may or may not be valuable. Experienced McDonald's collectors look for complete older items in excellent condition and newer items that might be unusual or limited.

Most non-Happy Meal McDonald's collectibles feature the company name, one of the corporate logos, the trademark “M,” or recognizable characters.  Remember that a copyright date is only the year of first issue—a seemingly early piece may still be in circulation.

Early and scarce are the key words in McDonald’s collecting, although they may not occur simultaneously. Look for design features and characters no longer in use, such as Archy McDonald, the early character Speedee, items with the golden arch logo with a slash mark, and items related to the old style "red and white” restaurants. A 1966 Ronald McDonald costume with slash-arch logos, complete with makeup and wig, surfaced at an unclaimed storage locker auction. Needless to say, a collector paid several thousand for that hot item.

Most people think the same toys appear in all McDonald’s Happy Meals. In fact, they vary from region to region and country to country. This brings the total issued into the millions. And the more produced of any collectible, the less value it eventually has.

It May Not Be What It Seems

QUESTION: I’m a big fan of the Civil War. I’ve read a lot about it and go to re-enactments regularly during the summer. Recently, I started a collection of Confederate items. My most recent purchase was a cartridge belt plate with the letters “CSA” on the front. It looks real enough, but I’m not so sure. Can you tell me how to tell the fake from the authentic items?

ANSWER: As in all collecting, the more educated you are as a collector, the better off you’ll be. You must become an educated buyer. Purchasing on sight just because an items looks good and the price is right isn’t enough.

There’s a sucker born every minute. And when it comes to identifying Confederate militaria, there’s probably one born ever couple of seconds. In fact, someone once said that if the Confederates had everything that’s now believed to have belonged to them, the would have won the war and had a surplus.

Confederate items can be worth 10 times those that belonged to Union soldiers. So the market for Confederate fakes is ripe. Be wary of dealers that won’t tell you anything about an object, then offer it to you for what amounts to a bargain basement price. If the price is too low, the item most likely is a fake. Even selling it for a low amount, the dealer will make out on the deal.

To make objects look as if they’ve literally been in battle, some have minie balls hammered into them. A tell-tale gray ring will show that the ball had not been fired into the object.

Demand that a dealer authenticate a Confederate object. Ask if you can get the item appraised by a professional appraiser before agreeing to purchase it. Whether you plan on buying a $1 minie ball or a $10,000 Henry repeating rifle, it always pays to ask. If the dealer refuses to let you get it appraised, just walk out of the shop or away from his or her booth at a show. If the dealer is selling legitimate Civil War memorabilia, he’ll let you bring it back for a refund.

If you purchase what you think to be an authentic Confederate object for a relatively substantial price and it turns out to be fake, then you have the right to prosecute the dealer for fraud. Doing so will probably prove difficult, since fraud is difficult to prove, but it doesn’t hurt to try.

Confederate coins are a good case in point. Unscrupulous dealers have hundreds cast, and sell them for modest prices. Coins are minted, not cast, so they’re fakes. But, then again, how do you prove that the maker wasn’t making honest reproductions to sell to re-enactors?

Sometimes labels on objects will reveal their authenticity. First, paper labels didn’t come into common usage until the turn of the 20th century. If an item has a paper label on it, it would pay to have the paper tested. You might just discover that the process used to make the paper didn’t exist before the 1930s.

As for belt plates, two types exist, excavated—dug out of the ground—and unexcavated. Fakers will use acids and brass-black to pour over the buckle and create a dark color to make a patina. Look for signs of liquid in tiny pits, or smell the buckle. It will have a harsh foul smell, like something rotting.

A faker often makes a reproduction of an unexcavated buckle by making it look damaged. You should look for evidence that parts have been filed off. The belt plate also should have the same color throughout and "no spots where the brass is shining through. Above all, be suspicious of any buckle marked "CSA" or "CS." And if it has a date like 1862 on it, it’s not authentic.

Within militaria, the Civil War is a problem because there are more items from it around. One way in general to tell if a product is fake is to judge its quality. Very few can duplicate the quality of merchandise that they had back then.

A Case of Romantic Identity

QUESTION: My husband and I recently purchased what looks like a plain sideboard while traveling through South Carolina. It’s smaller than a regular one and has only four legs instead of the usual six, plus it’s about 10 inches taller. It looks to be made of a more common type of wood like pine or elm and has little decoration. Can you tell me about this piece of furniture?

ANSWER: It seems you bought what some people call a huntboard and what most Southerners call a slab. Whether it’s antique or not is dubious.

The word "huntboard" conjures up visions of dashing red-coated Southern sportsmen sipping mint juleps from frosted coin-silver cups while engaging in spirited conversation with soft-spoken young belles—all gathered around a high four-legged serving table, an inlaid mahogany demilune sideboard, circa 1800, often found in Southern dining rooms.

But more likely the huntboard turned up beneath a spreading oak tree, conveniently placed so that overheated horsemen could grab a refreshing drink without dismounting. And every Southerner worth his or her riding crop knows huntboards were built a good five to ten inches taller than sideboards because men in high hunting boots couldn't bend their knees and found it more comfortable to eat standing up. Another equally practical explanation for the huntboard's height was that it kept food out of reach of high jumping hound dogs.

Both scenarios are completely fictional, devised in 1925 in a romanticized account of Southern furniture, part of the romantic, if mostly incorrect, Colonial Revival Movement, perpetuated by the grey ghosts of the Civil War. Imagine a tall, gleaming, highly polished walnut four-legged serving piece set with coin silver and transfer-pattem earthenware, complete with a long rifle, and you can almost hear the thunder of the horses’ hoofs and the hunter’s horn sounding in the distance.

If the term had been part of aristocratic Southerners' vocabulary at all, it would have been their name for the piece of furniture out on the back porch or in the back hall of the "big house"—not in the dining room of the plantation home. In the Southern mansion the hunt-board was a basic piece made of native poplar or pine, not a glamorous item of walnut or mahogany. And when meal-time came around, the humble huntboard was set with pewter, crudely fashioned wooden bowls, and crockery, not the costly imported earthenware and handcrafted coin silver.

In other words, in the wealthy Southern plantation home, huntboards were just utilitarian pieces designed for the servants and slaves to eat around—a "board," as in "room and board." This variety of 19th-century huntboard comes closest to the original purpose of a sideboard—a simple stand-up serving table.

During the mid-19th century, the agrarian South—unlike the industrialized North—had few cities to support major cabinetmaking shops. Modest farmhouses and the occasional plantation sprawled throughout the region. This spread-out population—and the abundance of Southern forests—meant that it was more economical for furniture to be made "on site" by a traveling craftsman or even a handy family member than purchased from a faraway joiner's shop. During those months when the crops were planted, dinner—as they called the heavy noonday meal—had to be served efficiently. So slaves at the plantation main house set out biscuits, gravy, and other vittles on a quickly, even crudely, constructed sideboard called a “slab.”

The term "huntboard" was born at a time when a falsely romantic image of the South was at its peak. During that time, the demand for Southern huntboards far surpassed the supply. There had been little reason to keep the plain, crudely made slab once the servant and slave society disappeared. And many middle-class families that held on to the better walnut and cherry serving tables during the bleak postwar days quickly discarded their "old furniture" after the economy improved. As a result, furniture companies produced fake and reproduction huntboards by the truckload in the late1920s and '30s. Those authentic slabs that survived were often found in deserted country houses. Though "huntboard" sounds great, there’s no evidence that people actually used the word during antebellum days.

So the piece you purchased most likely dates to the late 1920s or early 1930s. Age and neglect probably made it appear much older. One way to tell if it’s authentic is to check the wooden pegs used to join it together. If it’s old, the pegs will be slightly elliptical and jut out of their holes a bit. If newer, they’ll be round and flush with the surface of the wood.