Tuesday, March 10, 2015

Ashes to China, Bones to Beauty



QUESTION: I have a beautiful vase that’s been in my family for years. It seems to be made of delicate porcelain and is decorated with a fish-net type of design that’s raised off its surface. The vase has a green circle with a crown on top and Lotus Ware printed around the outside. Inside are the initials K.T.K. Co. with a crescent and star. Can you tell me more about this piece?

ANSWER: What you have is a piece of Lotus Ware, a short-lived but highly prized type of bone china made by Knowles, Taylor & Knowles of East Liverpool, Ohio. Produced for only a few years in the 1890s, many collectors consider it to be the finest bone china ever made in the United States. The term "Lotus" comes from the translucent pearliness of the glaze, which Isaac Knowles had once observed resembled the glowing sheen of a lotus blossom.

Lotus Ware was a dream of Isaac Knowles. His firm, founded in the 1850s and lasting until the 1930s, consisted of Isaac Knowles, Col. John Taylor, his son-in-law, and his son, Homer Knowles. Isaac Knowles wanted to produce fine bone china that would rival the best imported from England. He had been a longtime producer of Rockingham pottery, yellow Queensware, and ceramic canning jars. So in 1870 he decided it was time for a change and brought his son and son-in-law into the firm. Within 10 years, Knowles, Taylor, & Knowles was not only the largest pottery in East Liverpool, but did all its decorating in-house. .

What is bone china? Literally, it’s fine china ware made from bone ash, which results from burning animal bones that are crushed into a fine white powder. English porcelain makers discovered this combination of ingredients about 1750. Strong hard porcelain chips fairly easily and unless specially treated, is usually tinged with blue or gray. Bone china, on the other hand, is strong, doesn’t chip easily and has an ivory-white appearance, perfect for fine china. The bone ash greatly increases the translucence and whiteness of the porcelain. And though it costs less to make it than porcelain, makers charge a premium for it.

Fortunately, East Liverpool had a stockyard that could supply the needed bones to make the ash. This probably had a lot to do with the decision of Knowles, Taylor, and Knowles to make bone china. And even though the company did well, Isaac Knowles had a vision to create something rare and beautiful—art in porcelain.

Trucks hauled in large quantities of bones from the slaughterhouses and dumped into them into large vats to boil away any meat. Workers dried the remains in kilns, which burned the bones to a powdery ash. They then mixed the powdery ash and the porcelain formula together to form the porcelain composition.

After first casting bases, bowls and other items in the casting shop, workers took the bisque ware to the kilns to be fired for the first time.

After the firing took place, workers transferred the pieces to the decorating shop to be decorated partially or totally by hand. There skilled artists gilded the ware or applied hand-painted designs. Once decorated, workers transported the ware to the kiln room to be fired again to make the design permanent. After cooling, they finally transferred the pieces to the warehouse for shipment.

Knowles employed a type of decorating unique to Lotus Ware which placed flowers, leaves, stems and filigree—open works of elaborate designs—on the pieces of china. The person responsible for this was Heinrich Schmidt, a German artist who had previously worked at the Meissen factory in German. He was a bit of an eccentric and saw himself as an artist, keeping the recipe to make the clay slip he used in his head. He also insisted on working in a room without windows in order to foil pottery industry spies.

Schmidt originated his own floral decorations and open work designs. When he was ready to put his clay flowers on a Lotus bowl, he would first center the bowl on a whirler and then trace out his particular pattern on the bowl with a undulating movement, much like one would trace an imaginary lead pencil around the bowl. His instruments were a rubber bag and copper tube similar to that used in cake decorating. He produced the stems, leaves and flowers of his patterns with remarkable skill, using a small piece of plaster of Paris, a little bit thicker than a lead pencil and shaped like a petal, to give a more realistic impression to his flowers. This was always done after the petals had reached the proper hardness. He sometimes indented the stems of his floral designs, and attached leaves to them, using a sharp tool to give a roughened and more natural effect.

Schmidt first worked out his patterns on a small plaster mold. He would do a quick penciling of his design on the mold and then etch it out slowly with his cornucopia bag. These minute indentations served to support the moist clay while the clay was drying. When the drying process was complete, the open work would be removed from the mold by a slight jolt on the plaster form fro the hand.

He would next take the open work designs into his hand and apply a little fresh slip to its outer edges. Then he would attach the design to the vase or bowl he was working on. If too much pressure was applied, the pattern would be crushed and rendered useless.

Another method Schmidt used, called `jeweling," featured a jewel and swag type decorative chain placed on the item of Lotus Ware making it appear as if the jewel and chain had been hung on the piece. The "fishnet" design was also commonly used on many pieces of Lotus Ware along with the molded patterns of shells and lily pads.

The bodies of Lotus Ware pieces are translucent and fragile with a gloss or matt finish in white or in a light and deep olive green color Most of the Lotus Ware decorating reflects the Art Nouveau influence of the era, with its flowing styles and applied decorations.

Discovering who decorated a piece of Lotus Ware has always been a challenge, even for the most knowledgeable collector. Unless a piece has been signed and the artist is known to have worked at the firm at that time of the decorating and signing, it’s mostly speculation as to who did the decorating. Since the company paid artists by the piece and not by the hour, it’s probably certain that they didn’t mark the pieces they decorated.

Only two marks are known to exist on Lotus Ware. The first shows a circle with a crown on top and the words “Lotus Ware” printed around the outside. The initials K.T.K. Co. with a crescent and star are inside the circle. The second is similar but with the words Knowles, Taylor & Knowles spelled out.

Today, only about 5,000 pieces of Lotus Ware survive.






Wednesday, March 4, 2015

First and Foremost



QUESTION: My grandfather left me a first edition of Robert Louis Stevenson's Treasure Island, illustrated by N.C. Wyeth. I’m just an average reader and not a book collector. What makes a first edition special and is it worth anything?

ANSWER: First editions of books are special because they’re the first printing. If they’re signed by the author, they’re worth even more. But not all old books are first editions and not all first editions are old books.

Books have had a tremendous influence on shaping our civilization and culture for over a thousand years. People love to hold and own an original or older copy of a classic and feel a part of its influence by preserving it. And apart from the content, many books are antique objects as beautiful as furniture or pottery or any other collectible. Such is the case with your grandfather’s book.

The quest for exploration and adventure Is what attracts collectors to old books— reading first-hand accounts of those that were there, plus the craft and art of older books is dramatically lacking from those of today. Antiquarian books, as rare books are called, remind people of how well the past has been preserved. They kept books for generations because they contained the kind of information or story that inspired their view of life. As they got older and settle into a life of reflection, the books that influenced them or their ancestors became objects they’d like to own.

Today, fewer people are collecting rare books. Instead, they’re focusing on modern ones, mainly first editions of literature—those printed after 1929. Modern book collectors believe their collections will gain in value, like any good investment, plus they enjoy having the first editions.

The exposure of collectors to the Internet and television shows like Antiques Roadshow has had an impact on the market, and that impact hasn’t always been positive. After watching the rising prices of the first edition market, people believe that antiquarian books are all about money. They’re not—antiquarian books are important objects of the past, like arrowheads, and should be collected in at effort to understand what and how people read in another time.

Important American writers, such as Ernest Hemingway, Walt Whitman, and Edgar Allen Poe have a strong collector base. Unfortunately, most of these authors have been heavily reprinted, and the beginning collector often assumes that old editions are first editions, when in almost every case they aren’t. Being old doesn’t necessarily make a book valuable.

Today’s book collectors lean heavily towards modern American first editions, such as The Great Gatsby, The Sun Also Rises, A Farewell to Arms, The Grapes of Wrath, To Kill a Mockingbird, and Catcher in the Rye—books they read in high school or college, which helped shaped how they think and who they are. Fine copies of these books in their original dust jackets fetch astronomical prices in today’s market. For instance, a first edition of The Great Gatsby went for $130,000 at auction, due largely to the personal connection that people feel for these classics. Books by Charles Dickens, Mark Twain, Zane Grey, and Jack London are popular, also. A first edition of To Kill a Mockingbird, which sold for around $1,000 in the 1990s, today commands between $10,000 and $15,000, especially after the announcement by the author of an upcoming second novel, the first in 40 years..

The same goes for beautifully illustrated books by Maxfield Parrish, Edmund Dulac, and N.C. Wyeth. 

A first edition of Charles Darwin's The Origin of the Species has doubled to about $50,000 in recent years. John Steinbeck's novels have been going up steeply, at least for The Grapes of Wrath, which has tripled to $6,000 in the past few years.

So why do first editions sell so briskly?. That’s easy to understand, since they’re well-identified and have only a few factors that affect their value, such as dust jacket condition and signatures of the author.

A book in a nicely-preserved jacket is worth many times that of one without a jacket. For example, a first edition of Gone With the Wind with a dust jacket is worth approximately five times more than a first edition without the jacket.

But how about the availability of old and antiquarian books? Are they still accessible? The availability of old and antique books has never been greater. The Internet overflows with old books, and for modern books there are multiple copies of collectible books. Unusual old books in fine condition suddenly become collectible, despite being overlooked by past generations. And while people continue to find old books in attics and at estate sales, the best discoveries usually can be found in antiquarian bookstores.

But while accessibility to rare books is increasing, their availability is decreasing. A book’s exposure to the elements and casualty—fire, smoke and water damage, rodent and pest damage, cannibalism and discard—adversely affect its availability. For instance, the Internet has improved access to rare books, but also to cannibals—those who extract the prints, maps and signatures from books to sell separately as ephemera.
Today, it’s virtually impossible to find an existing copy of Elliott's 1884 History of the Arizona Territory because the value of the individual illustrations far exceeds the value of the complete book. As a result, very few complete copies remain.

Monday, February 23, 2015

Spin, Spin, Spin



QUESTION: Several years ago, I purchased a small spinning wheel at a local antique show. The dealer said it had been made small for use by a child. While that seems like a good way to teach a little girl how to spin, I’ve never seen one so small. It stands less than two feet tall. Also the wheel doesn’t look like the usual kind and sits in a vertical position under the spinning mechanism. What can you tell me about my spinning wheel? Was it for a child’s use or maybe made as a sales sample?

ANSWER: Your spinning wheel was neither made for a child’s use or as a sales sample. It’s called a parlor spinning wheel and is one of four types of wheels made in the 18th and early 19th centuries for use by women in the home.

Spinning has been a vital part of everyday life all over the world for thousands of years. The Western spinning wheel has been around since about the 14th century, thus there are as many style of wheels as there are people who make them. But there are only two basic ways to spin, and all styles of wheels are variations on one of the two.

The first way to spin is called "quill" or"spindle" spinning. The mechanism is a simple system of pulleys attached to the wheel. The pulleys cause a long, sharp, metal spike, or "quill," to turn. Fibers are spun off the tip of the quill and then manually wound back onto it.

The second, more modern, way to spin is with a "spinning assembly" which consists of a "flyer" and "bobbin." The flyer is a U-shaped piece of wood with hooks running along both sides and a hole, called the orifice, at the bottom. The spinning assembly allows the spun fiber to wind onto the bobbin automatically.

There are four styles of spinning wheels. The first is the wood wheel, which has no treadle or foot pedal to turn the wheel. The user must work with it while standing, walking backward to twist the fibers and then forward again to wind the spun yarn onto the quill or spindle. For this reason, people call the wool wheel the walking wheel or the high wheel or great wheel because it stands 4 to 6 feet tall.

The second style of spinning wheel is the flax wheel, also called the Saxony wheel. This type is what most people think of when they picture a spinning wheel. It has a low slanted bench, a treadle to keep the wheel going, and a spinning`assembly. A Saxony  wheel also has some sort of distaff to hold the flax while the user spins it. The distaff could be a straight stick in a hole at the front of the bench, or it could be on its own frame so, you can swing it to the side. Very often the distaff has been lost over time, and the only clue that there was a distaff at one time is a hole in the bench.

The third type of spinning wheel is the castle wheel, which has all the same components of the Saxony—a small wheel, treadle and spinning assembly—but instead of being mounted on a slanted bench, the wheel and assembly sit in a vertical frame. Technically, this type can only be a castle wheel if the spinning assembly is mounted below the wheel, but most people now call any upright or vertical frame style a castle wheel. True castle wheels are relatively rare.

The last type of spinning wheel is the parlor wheel, an upright or vertical version of the Saxony. Though it may look like a castle wheel, only two vertical upright posts support the wheel instead of a rectangular frame. These wheels are also the smallest.

Besides the story that these dainty wheels were originally made for use by children, some antique dealers spin a yarn which says that immigrants brought this type over to America with them because they could only bring small items on the ships. And while both of these explanations for the parlor wheel's size seem plausible, neither is true.

The parlor wheel’s small size appealed to the Eastern and Central Europeans. There have been wheels dated well before immigration began which were just as compact as those made during and after the rush to America.

Truly antique versions of the parlor spinning wheel sell for nearly $500. But there are a lot of reproductions out there, and it’s often difficult to distinguish the authentic from the reproduction.



Tuesday, February 17, 2015

Carrying on the Tradition



QUESTION: I recently purchased a small wooden sculpture of a crane. It looks to be carved from an exotic wood, but I’m not sure what kind. It has a sleek, streamlined appearance, much like sculptures from the Art Deco Period of the 1920s and 1930s. Can you tell me anything about my sculpture—when and where it was made and perhaps who made it?

ANSWER: It looks to me as if you have a piece of Balinese wood carving. Your crane has the style and shows the fine workmanship of pieces from that part of Indonesia. Dating it is more of a challenge because much of the contemporary wood carving of Bali was heavily influenced by the style of Art Deco. And even more recent pieces have that look.

Wood carving, dating back 3,000 years, is the most popular medium for artistic expression in Indonesia, and the diversity of Indonesia's wood carvings is remarkable.

In the times of Bali's old feudal kingdoms, woodcarving served as temple decoration. Wood was also utilized in such everyday household features as carved beams, columns, doors for houses, and implements like musical instruments, tool handles, and bottle-stoppers. Carvers painted these carvings in bright colors, lacquer, or gold leaf and seldom left the wood raw.

There are two main types of Balinese woodcarving. The first is traditional carving in bas-relief tableaux and plaques, used mainly for decorating temple doors, walls and columns, plus small statues of deities and mythical heroes, designed for use in public buildings. The second type is contemporary woodcarving, featuring highly stylized human or animal figures, often grotesque, almost psychotic—expressing the Balinese fear of the supernatural and a strong, sensual feeling for nature.

One of Bali’s most noted wood carvers was Ida Bagus Nyana, who worked in the village of Mas. His son, Ida Bagus Tilem, carries on the tradition today.

Ida Bagus Njana created abstract sculptures of human beings and surrealistic knotty "natural" sculptures out of gnarly tree trunks. He used small incisions on the surface to indicate contours while the wavy grain of the wood contributing to the motion of the figure. He was also the original creator of the fat statues of toads, elephants, and sleeping women now on sale all over Bali.

Nyana allowed his son, Tilem, to develop his skills, unhindered, while teaching the boy to be patient. Gradually, Tilem developed his talent, carving tiny birds, animals, and traditional figures, despite battered hands from his first few attempts with his father’s razor-sharp chisels. He was able to sell his carvings to tourists and pay for his schooling.


Tilem decided to leave school and set up a studio at his home in Mas in 1958, where he sold his own work to help his family. He furnished wood and tools to local boys who couldn't afford them. Eventually, he had over 100 apprentices and 100 carvers working with him. He was chosen to represent Indonesia at the New York Worlds Fair in 1964 and has had numerous overseas exhibitions.

During the 1930s and 1940s Balinese wood carving underwent a transformation when the main art center shifted to Ubud and its surrounding villages. The 1930s brought an influx of tourists, and a dramatic change in the perspective of Balinese wood sculptors. Shops, street corners, hotel lobbies, marketplaces, the airport, and harbors suddenly blossomed with objets d'art   produced to sell. In contrast to the traditional polychrome, mythological religious carvings, more realistic statues of peasants toiling, nude girls bathing and deer grazing appeared, themes that found a very ready market among the tourists. All in natural polished woods.


Most Balinese wood carvers favor teak wood, though it has become increasingly expensive. Teak is one of the best woods because it is easily carved and is less susceptible to warping, splitting, insects and rot. Carvers will occasionally use mahogany and ebony, both of which are also very expensive. Besides the more exotic woods, carvers use jackfruit, a cheap, common wood, though it tends to warp and split, as well as tamarind, hibiscus, frangipani, and kayu jepun, and sawo, a beautiful dark red wood.

The texture of the grain determines the nature of the piece to be carved. Dark ebony, particularly pieces with striped grain, are best suited for vertical shapes or faces. Rarer are pieces made of unpolished ebony (sanded and brushed only) where you can make out the grain in the wood. The blackest ebony might be used to depict a subject of great dignity. Satinwood, a light striped, beige-colored wood native to Bali, may inspire pieces of a softer theme. The grain often follows a skin pattern or veins in the arms of the statue.

The sounds of gentle hammering, sanding, and spontaneous chatter of the woodcarvers fill the lanes in villages like Mas. They sit cross-legged on the floor surrounded by piles of freshly carved wood chips and rough, uncut blocks as chickens peck their way around the tools. The sweet aroma of clove cigarettes and coffee hangs over the warm, humid air.

Carvers work with simple tools—a hand-held knife or a chisel struck with a hammer or mallet. The art of the wood carver depends on knowledge of specific woods, skill in fashioning the material, and talent in design.
     
Traditionally, they smoothed their pieces with pumice and gave them a high polish by rubbing them with bamboo. Traditionally, they treated and stained their carvings with oils to achieve a pleasing subtle gloss, but now Balinese artisans find that neutral or black shoe polish produces much the same result with half the effort.
    
In the main woodcarving centers, high-quality carvings sell for as much as US$3,500 apiece. Contemporary carvings in natural woods begin selling for around $25 and go as high as $500 online.

But regardless of how commercial the subject matter, all carvings share certain characteristics and techniques uniquely Balinese. Even the copyists work strictly within the self-imposed rules of an established style.

Thursday, February 12, 2015

Electric Lamps for Everyone



QUESTION: Several years ago, I bought an early electric glass lamp at a flea market. Although it was filthy and needed lots of TLC, I decided that I just couldn’t live without it. After giving it a thorough cleaning and having it rewired, I noticed how much it looked like the Tiffany lamps of the early 1900s. Upon further inspection, I noticed E M & Co. impressed into the base. So far, I’ve been unable to discover who E M & Co. is? Can you tell me who made my lamp and a little about it.

ANSWER: You’re the proud owner of a beautiful silhouette lamp—called that because of the silhouettes created by the shade when the lamp is on—made by the Edward Miller & Company of Meriden, Connecticut.

Unfortunately, when people think of metal and glass lamps of the early 20th century, they usually associate all lamps with Louis Comfort Tiffany. Then their eyes light up with dollar signs. But most of the lamps from this period were not made by Tiffany.

When Tiffany first began making his lamps, they were expensive to make and expensive to buy. Prices for them ran into the hundreds of dollars. Slag glass panel lamps, as they're known  today, had a few large pieces of glass fitted into a cast metal frame that simulated the effects of the more expensive leaded glass lamps. That made them affordable for the average person. A 1925 Sears, Roebuck and Co. catalog offers metal table lamps fitted with "art glass" priced from $6.90 to $19.

Many companies made this type of lamp. Often the lamps weren’t signed, but if the makers did mark them, they usually cast their mark into the metal on the bottom of the base. Sometimes they placed a mark on the metal edge of a shade or elsewhere on the base. Some lamps had paper labels, but most of them are long gone. Edward Miller & Company was one of many lamp makers.

The Miller Company began in 1844 in Meriden, Connecticut, as Joel Miller and Son. Originally, the company produced metal candle-holders, then moved on to kerosene lamps, gas lighting, and electric lighting. The name of the company changed, also, becoming Edward Miller & Company, then The Miller Company, both under the mark E M & CO on their lamp bases.

Although Miller produced expensive leaded glass lamps, the company took advantage of the opportunity to sell lighting to the middle classes as more homes became wired for electricity. The company sold lamps in bulk to utility companies in large cities who retailed them to their customers. A 1920 Philadelphia Electric Company catalog shows lamps with prices from $12.50 to $60, depending on size.

Miller took advantage of the latest discovery in lighting—electricity. Up to the last decade of the 19th century, everyone owned and used either gas or kerosene lamps. But the light they gave off was dim. The discovery of electricity led to lamps that glowed brighter in a downward direction, thus offering improved lighting for reading and sewing.

Though electrical lamps offered lots of advantages, there were problems with the carbon filaments in early incandescent light bulbs that didn't last long. The bulbs turned dark inside from carbon, and they used a lot of electricity per watt of light. The invention of the tungsten filament bulb and improvements to it made between 1906 and 1910 established electric lamps as a practical and reliable alternative to gas and kerosene.

These early electric lamps offered a variety of base and shade overlay designs, influenced by several style movements including Art Nouveau with its intricate curvy lines and botanical themes, Arts and Crafts with its simpler forms and straighter lines, and Orientalism with its Middle Eastern flavor. And with the discovery of King Tut's tomb in 1922 , people’s interest in everything Egyptian grew.

Lamp creators took their inspiration from all of these influences, giving consumers a choice of floral designs, geometric patterns, or scenes with camels, palm trees and pyramids. Other designs reflected Neo-Classical Revival architectural and furniture styles, employing fluted columns, garlands, and urns as design elements.

Manufacturers produced slag glass lamps with amber glass, as well as other colors. Amber was the dominant color because it proved to be the most restful for reading. These lamps often have more than one color of glass. Makers sometimes used various colors of slag glass to simulate sunsets or water behind their metal frames.

Today, these same slag lamps sell for $500 to $1.500, depending on style, size, and especially condition. Smaller varieties, known as boudoir lamps, sell for less while larger ones sell for more.

With the onset of the Great Depression, the market for more expensive dramatic, heavy lamps with glass shades faded and manufacturers responded with cheaper, lightweight lamps with paper or fabric shades.


Monday, February 2, 2015

Cottage Charm



QUESTION: I have a cabinet that seems to be handmade. One of its drawers has three compartments side by side and one in the back for silverware. The other drawer doesn’t have compartments but does have slots cut into it as if there were slats at one time. There are three shelves in the base of the cabinet. What I am curious about is the fact that the top slants to the back. At first I thought it was the way it was sitting, but after moving it several times I noticed that it’s made that way. The top narrows slightly at the sides from front to back. I have never come across anything like this and was wondering if there was a reason behind the slanting or if someone just had poor craftsmanship! I appreciate any information you can offer.

ANSWER: What you have is a Victorian sideboard. This style is known as Cottage Victorian. Sideboards had been around since the 16th century. They were made to serve food and hold table linens, serving pieces, and flatware. In smaller Victorian cottages, there wasn’t a lot of room. Many didn’t have a formal dining room, but just a dining area in the parlor. So that’s why your sideboard is smaller than normal. Usually, the makers of these pieces painted them in bright colors, often adding  colorful floral decorations. While your sideboard could have been homemade, I doubt it. It may have been altered, however, to stand straight on a slightly slanted floor, thus the slanted top. Unfortunately, the hardware on your sideboard isn’t original. Most of the time, Cottage Victorian furniture had simple wooden knobs and handles.

Cottage furniture became popular in the United States, particularly along the East Coast, after the Civil War. Pieces began appearing in workshops and then homes of the wealthy in places like Martha's Vineyard, Cape May, and the Berkshires. But the popularity of these items didn’t  remain exclusively with the upper class. As the middle class grew, equally elegant, but relatively reasonably priced versions began to appear in the homes of the nation’s growing work force, particularly in Pennsylvania and New England.

Homeowners purchased Victorian Cottage furniture in mostly bedroom "suites", sold as  coordinating groupings consisting of a double bed, a washstand, a dresser or vanity with an attached mirror, a small table, a straight chair and a rocker, and often a wardrobe. Cabinetmakers used pine or other inexpensive wood, then painted the entire piece with  several layers of paint. The finished sets were colorful and whimsical.

Cottage Victorian beds have high and lavishly decorated headboards. Finials and medallions constituted what little carving there was on most pieces. Most of the decoration took the form of painted flowers, fruit, and other plants, featuring a large painted bouquet-like medallion in a central panel on the headboard and a smaller, matching one on the foot-board. Local cabinetmakers, most of whom didn’t have any formal training, built these pieces from designs in pattern books. And since they had no formal art training, the decorative elements they applied to their pieces had a primitive, folk art feel to them. A few featured highly detailed and beautifully executed scenes of sailing ships or local wildlife. They painted all the pieces of a furniture suite with the same motif. The most popular base colors were tan, blues, greens, and pinks. A few rare ones use the varnished natural wood as the background onto which the cabinetmaker applied the decorative designs.

An artisan then painted it with a base of soft yellow, and highlighted this coat with green bordering, and rows of flowers, and spandrel fan designs in the corners, giving it vigor. Although such a piece was commonplace once, it’s rare and valuable today. One of the biggest misconceptions regarding antiques is that 19th-century homeowners loved the appearance of natural woods in their furnishings. That preference didn’t appear until the early 20th century. As a result, most painted furniture has been stripped and finished to the often not so beautiful bare wood by well-meaning dealers and collectors. Although cabinetmakers refrained from painting their costly mahogany and walnut pieces, those in small towns and villages paint-decorated nearly all their birch, maple, oak, pine, and poplar furnishings to brighten their customers’ dark, oil-lamp lit homes.

Cabinetmakers fitted drawers and cabinet doors with wooden knobs instead of metal hardware. Even the boldly colored paint, didn’t have the look of value to it. Those pieces of Victorian Cottage furniture that have survived intact usually have a crackled surface from age-shrinkage, with flakes in spots due from dryness. Also, look for signs of wear on edges, tops, and near the knobs.

To the untrained eye, Victorian Cottage furniture looks as if it should be sold as junk or stripped to the bare wood. Whatever you do, don't strip your sideboard. If possible, get an opinion from someone who knows painted furniture.

When purchasing painted Cottage Victorian furniture, look for a bone dry surface, subtle wear, and age crazing that has shrunk geometrically. Fortunately, those who fake antiques haven't figured out a way to create spider-web-like lines with chemicals. Good painted furniture has charm and an integrity that makes it one of today's best antique investments since painted pieces haven’t been reproduced. .




Tuesday, January 27, 2015

The Other Arts and Crafts Designer



QUESTION: I have a Mission chair that has been in my family for decades. I never paid much attention to it. But recently when I was cleaning it, I turned it over and noticed a label under the arm of the chair which reads, "Limberts Arts and Crafts Furniture/Trademark/Made in Grand Rapids and Holland.” I know that Grand Rapids is in Michigan, but did this company also make furniture in the Netherlands? And just who is Limbert?

ANSWER: Charles Limbert made what you call “Mission” furniture in Grand Rapids and Holland, Michigan. In fact, his furniture wasn’t constructed in the Mission Oak style, which actually was a style of Arts and Crafts furniture that developed just before the turn-of-the-20th century.  This wasn’t as much of a style as what manufacturers called furniture made of oak that featured simple horizontal and vertical lines and flat panels that accentuate the grain of the wood. It was supposed to emulate furniture of the Spanish missions in California and Texas. What Charles Limbert made was furniture in the pure Arts and Crafts style.

The Arts and Crafts Movement in America originated in mid-19th-century England where the teachings of John Ruskin and William Morris popularized social reform. The movement began as a revolt against the Industrial Revolution and the dehumanization of the workers being replaced by machines. Americans learned about this movement through Gustav Stickley's magazine The Craftsman. Hand craftsmanship and a return to simplicity became hallmarks of the movement. These ideals applied not only to the lifestyle of the follower, but also to furniture and accessories in the home.

Hailed as the beginning of Modernism in the United States, Arts and Crafts interiors were in direct contrast to the preceding Victorian period of ornate decorative arts. Rectilinear forms of quartersawn oak replaced ornately carved rosewood and mahogany Victorian furniture. Mortise and tenon joints, butterfly keys, and the grain of the wood, itself, became the ornamentation on Arts and Crafts pieces.

While Gustav Stickley is best known as the leader of Arts and Crafts Movement in America, other designers also achieved recognition for their contribution to Arts and Crafts design. One of them was Charles Limbert. His company produced high quality Arts and Crafts furniture, but didn’t attempt to influence consumers about the idealized harmony of the Arts and Crafts lifestyle.

In the early 1880s, Charles Linbert began his furniture manufacturing career at the John A. Colby and Co.. in Chicago. He learned all sides of the furniture business— design, production, and marketing. An 1889 partnership with Philip Klingman established the Limbert and Klingman Chair in Grand Rapids, Michigan. Limbert and Klingman manufactured period reproduction chairs for only two years. In 1894, Limbert formed the C.P. Limbert and Company to produce Arts and Crafts furniture.

By 1906, the company had grown and moved to Holland, Michigan. Limbert called his line of furniture "Holland Dutch Arts and Crafts," most likely in reference to the local Dutch population.

Limbert's early furniture shows influences ranging from Japanese to Gothic. Some of his early china cabinets and bookcases have doors with stained glass in an Art Nouveau style.

His peak of design achievement came during 1904 to 1906 when he introduced many of his cut-out designs. Many of his de-signs were internationally inspired by the Vienna Secessionist School and designers such as Scotsman Charles Rennie Mackintosh and Austrian Josef Hoffmann. Limbert employed designers such as Hungarian architect Paul Horti and father and son Austrian designers, Louis and William J. Gohlke.

Limbert promoted his furniture as being "essentially the result of hand labor, with machinery being used where it can be employed to the advantage of the finished article." Like Stickley, he didn’t let machinery control production and emphasized the contribution of skilled craftsmen in his furniture promotions.

He constructed his furniture of quartersawn white oak, with well-executed doweled joints, keyed tenons and splined tabletops. Long, tapering corbels under arms characterize Limbert chairs. Unfortunately, Limbert didn’t extend his wood working quality to the hardware used on his pieces, most of which came from the Grand Rapids Brass Company.

Compared with Stickley's work, Limbert's designs were typically less severe and more visually interesting, usually achieved through the use of cut-outs and other elements inspired by the as English Arts and Crafts Movement and Dutch folk furniture.

His pieces were among the original furnishings of the Old Faithful Inn in Yellowstone National Park. Today, several wash stands remain in the Old House section of the Inn.

Tuesday, January 20, 2015

That's a Crock!



QUESTION: Some time ago I purchased an old crock at an antique show in my area. I believe it holds two gallons and has two hearts and the number “2" painted in blue on the front. The name Sarah Good is incised above the hearts. Can you tell me how old this crock is and what is the significance of the heart design?

ANSWER: Heart decoration was somewhat rare among crocks. Though your crock has a name incised in it isn’t unusual,  that the name is female is. This indicates that this crock may have been a wedding gift, specially made for Sarah Good. After all, a crock in the early to mid-19th century was a piece of kitchen equipment much as a set of canisters is today.

Potters made crocks of American stoneware, which they covered in an alkaline or salt glaze and often decorated using cobalt oxide to produce bright blue designs. Though people often use the term "crock" to describe this type of pottery, the word "crock" wasn’t used at the time these vessels were popular.

Stoneware is a type of pottery that’s  fired to about 1200°C to 1315°C. While it originated in the Rhineland area of Germany in the 15tth century, it became the dominant piece of houseware in America between 1780 and 1890. People relied on American Stoneware as not only a durable, decorative piece of houseware but as a safer alternative to lead-glazed earthenware. The invention of refrigeration caused its decline.

Americans began producing salt-glazed stoneware circa 1720 in Philadelphia, Pennsylvania, and Yorktown, Virginia. By the 1770s, the art of salt-glazed stoneware production had spread to many centers throughout the United States, most notably Manhattan, New York. The Remmey and Crolius families of potters would, by the turn of the 19th century, set the standard for expertly crafted and beautiful stoneware. By 1820, potters in nearly every American city produced stoneware, with those from Baltimore, Maryland, standing out for their excellent craftsmanship.

While salt-glazing is the typical glaze technique seen on American Stoneware, potters employed other glazing methods. They often dipped vessels in Albany Slip, a mixture made from a clay peculiar to the Upper Hudson Region of New York, and when fired, produced a dark brown glaze. They sometimes used this slip as a glaze to coat the inside surface of salt-glazed ware.

While decorated ware was usually adorned using cobalt oxide, American Stoneware potters used other decorative techniques. Incising, a method in which a design of flowering plants, birds, or some other decoration was cut into the leather-hard clay using a stylus, produced detailed, recessed images on the vessels. Potters usually highlighted these in cobalt. They also impressed designs into the leather-hard clay using wooden stamps. Potters occasionally substituted manganese or iron oxide for cobalt oxide to produce brown, instead of blue, decorations on their pieces.

In the last half of the 19th century, potters in New England and New York state began producing stoneware with elaborate figural designs such as deer, dogs, birds, houses, people, historical scenes and other fanciful motifs including elephants and "bathing beauties."

Most stoneware jugs had some sort of decoration on them which covered only a small area. Unlike other pottery, they weren’t decorated all over. Birds and flowers were commonly painted using cobalt-oxide glaze or incised into the surface with a stylus.

More elaborate designs featured chickens standing by a water trough or sprigs of greenery artfully handpainted with cobalt slip. Sometimes the location of the potter appeared on the side of the jar or on its base.

A crock’s decoration can often be a clue to where it was made. A two-gallon jug with a cobalt design of a sailing ship with flag atop the middle of three fasts, a light-house to the right and a group of rocks to te left, indicates that it most likely came from New England.

Potters signed a good bit of their work using their maker’s mark or sometimes incised their signatures in the surface of the jar. Many pieces can be attributed to particular makers based on the cobalt decoration, clay body, form, and such. They marked the gallon capacity of the vessels using numeral stamps or incised or cobalt oxide numbers or hash marks applied freehand.

For the last several years, stoneware prices have been climbing ever higher, especially for the high-end wares. Most stoneware crocks sell for four to six figures, depending on their maker and condition.

Collectors continue to pay premium prices for stoneware decorated with elaborate and unique motifs. Attributed to David Parr Sr. of Baltimore, a circa-1830 six-gallon jar with a cobalt design of a flower basket that covered the entire front of the vessel sold for $13,750 at auction. The back of the jar featured a flowering plant rising' from a mound of earth. The vessel had rim and base chips, as well as several cracks and still sold for a high amount.

The same auction contained a one-gallon stoneware jug showing a house, tree and fence which sold for $10,175. Stamped J. & E. Norton/Bennington, Vermont, buyers liked this circa-1855 jug not only for its cobalt decoration, but also for its small size. Salt-glazed pieces sell for especially high prices. A salt-glazed water cooler brought $10,500 at auction.



Tuesday, January 13, 2015

Vintage I Do



QUESTION: I have in my possession my great-grandmother’s wedding dress and accessories. They have been passed down from mother to daughter since my great-grandmother left them to her daughter. They’re in remarkably good shape, considering that they date from the1890s or perhaps earlier. I’d like to know more about how to care for them and since I have no daughters of my own, where I might donate such vintage clothing. Can you offer me any suggestions?

ANSWER: Vintage clothing has undergone somewhat of a Renaissance. As more and more people got interested in history and antiques through shows like the Antiques Roadshow, naturally attention turned to what people wore back then. Also, the proliferation of consignment shops selling vintage clothing has brought more people in touch with well-preserved older items.

Before looking at where you can learn more about the dress and accessories you have, you should understand the difference between old clothes, vintage clothes, and vintage costumes.

Old clothes are just that. Usually, they’re items that people recycle to charities so that less fortunate people can benefit from them. They can take in any time period, but are usually more recent in age. Vintage clothes, on the other hand, are items in good condition from particular periods of history, such as the 1890s, the 1920s, or the 1950s. And vintage costumes are sets of clothes in a style typical of a particular country or historical period. While vintage clothing can be purchased and worn and accessorized to complement today’s fashion styles, vintage costumes are special and can only be worn on special occasions like fancy dress events or in film or the theater.

One of the best places to learn about vintage clothing is at your local historical society. Often the organization will have a museum in which all sorts of historical objects are on display. Some have extensive vintage clothing and costume collections, but unfortunately, most have limited gallery space, so much of the clothing doesn’t get displayed. Many colleges also have costume collections, depending on the courses they offer. These are often unknown to the public, again because of the lack of exhibition space, staff, money, or interest.

The vintage clothing and costumes are usually donated by area residents. They bring in grandmother's or great-aunt Sarah’s clothes that they discovered when cleaning out her house after she died. The items run the gamut in type and condition. Sometimes they have an interesting story or provenance. Aunt Sarah may have even pinned a note to certain items.

These donations may then sit in the institution’s attic waiting for someone to resurrect and restore them. They present opportunities for a hands-on learning experience with costumes. Volunteering at your local historical society will enable you to to gain access to reference materials and vintage costumes. You can also view, close-up, exquisite workmanship and fabrics not available to the average person.

Even though museum visitors rate costume exhibits as one of the most popular attractions, sadly, some museums have little interest in displaying their costume holdings. At one Massachusetts historic site a visiting costume conservator was horrified to find a gown made by premier Parisian designer Worth stored in a shower stall. The director's reaction to her protests was "Why should I care about a woman's dress?"

While this attitude is common and a reason more costumes aren't on display, it opens the door for those who do care. The advantage of volunteering at an unenlightened institution is that a volunteer working on costumes might have a freer hand there than at an institution where the curator considers every thread sacred.

A few museums organize groups and programs centered around their costumes. These often include special seminars and teas, access to archives and the costume collection, and a newsletter.

These are ideal places to learn how to preserve your vintage wedding items. You’ll learn to wear white cotton gloves, what cleaning methods are best, and about different fabric types and safe storage methods, plus the names of suppliers of conservation supplies, such as acid-free boxes and tissue paper.

If you don't want to get involved in volunteering or groups, but want a close-up look at period clothing, some museums will set up appointments with their curators to see their collections.

And before blindly donating your items, be sure to ask how they’ll be cared for and if they’ll ever be displayed.

Monday, January 5, 2015

Schlock Clocks



QUESTION: I have a clock made by United Metal Goods Manufacturing Company, Inc., in Brooklyn, New York, in the shape of a pirate ship. Can you tell me who made my clock and when? It has three chrome masts, each with three sails, a ship’s wheel containing the clock dial mounted on the front, and a light imbedded in each end. 

ANSWER: Your ship clock is an Art Deco stylized version of a pirate ship, made in the mid-1930s. United Metal Goods Manufacturing Company produced unique and decorative timepieces as well as staple clocks and timepieces, mostly electric with reliable electric motors produced by the Westinghouse Corporation.

The foundation of most of these clocks was a remarkable electric motor and gearing designed by Anthony William Haydon between 1931 and 1939. His power system allowed these clocks to also perform other functions, such as twirling a cowboy's lariat or moving a figure in a graceful Hula. United Metal Goods made an astounding variety of animated clocks by using the Haydon patents.

braham Levy founded the United Clock Company in Brooklyn, New York in 1905. He remained president of the company until his death in 1961.In August of 1968, United bought the inventory, equipment, and tools of the Sessions Clock Company of Forestville, Connecticut, and for a short time marked clocks made at the Sessions factory “Sessions-United.” Eventually, United expanded its operations and became United Metal Goods Manufacturing Company.

The clocks that United Clock Company produced became known as "Carnival” clocks because carnival owners gave them as the "big" prizes at carnival games. Most of the time, however, players were never able to win these clocks because carnival owners often rigged the games. They eventually earned the monicker “schlock” clocks for their tasteless design.

United cast many of its clocks from spelter, a zinc alloy, including its ships clocks. The company offered its clocks in a variety of styles including the banjo clock, leaf sculpture clock, wagon wheel clock, and the traditional wall clock. Mantel clocks included a carriage and horses clock, Statue of Liberty clock, scales of justice clock, and an animated light-up fireplace clock. United also made other styles of clocks for the home including trophy bowling clocks, ship clocks, teddy bear clocks, and train clocks. They even produced pocket watch clocks that hung on the wall or from the ceiling.

These often tasteless clocks became a necessary decorative accessory for mantels in the homes of prosperous young couples in the 1930s and 1940s. The tradition of a ship model on the mantel comes from New England, where older families made much of their wealth in whaling. In that case, the ship model represented a constant reminder of the source of the family wealth. It was natural that the ship model eventually merged with the mantel clock.

As people moved to apartments in the cities, space for the tall clock vanished, leading to the popularity of mantel clocks. Often, manufacturers combined these clocks with figurative elements such as dogs, horses, goddesses, or whatever, limited only by imagination and their bad taste. United Metal Goods produced a long line of cheap, tasteless clocks that have since become cultural icons.




Sunday, December 28, 2014

Sweet, Sweet Santas





QUESTION: I found this old-world German Santa candy container in an antique shop a couple of months ago. He’s made of papier mach  and stands about 6 inches tall. He’s wearing a cone-shaped hat and carries a small Christmas tree. A faint stamp on the bottom says “Made in Germany.” This little Santa comes apart in the middle to reveal a lined interior. Can you tell me more about this little gem?

ANSWER: You have indeed discovered a little Christmas gem. What you have is a Santa candy container made in Germany around the turn-of-the-20th-century. Called a springhead, this little novelty features a Santa wearing a red-flocked coat and a cone-shaped hat. He also carries a small Christmas tree decorated with colored beads.

Of all the holiday decorations produced since the mid-19th century, few remain as cherished as early German Santa Claus candy containers. These handmade characterizations of Father Christmas remain a popular collectible. 

                              
The manufacture of Santa candy containers began in the 1880s. Makers sold them to an eager American market. By the end of the decade, U.S. retailers offered their customers German-made Santas in a variety of sizes and styles.
   
Selling for a mere five cents, these Santas represented old Kris Kringle in snow-covered garb. Sometimes makers added gold tinsel to represent sparkling snow. Santa containers came in a variety of sizes, from five to seven-and-a-half inches tall. Santa, himself, had a finely painted red face and white beard and wore a heavy coat. Other Santas wore felt robes trimmed with lamb's wool or felt. Purple crepe paper sometimes lined the inside of the outfit. Some of the Santas carry a tiny wicker basket at their waist or on their back.

The Germans couldn't make them fast enough. The making of these early candy containers involved eight to ten families, each responsible for different areas of production. One family might fashion the boots, another would create Santa's clothing, while another would add Santa's rabbit-fur beard. But the most important step involved painting the face.

Over the years the details of Santa’s face changed. One of the biggest influences was the poem “A Visit from St. Nicholas,” that portrayed Santa as a jolly old elf with a thick, flowing white beard and a white fur-trimmed suit. The public's impression of Father Christmas as a stern, thin old man changed dramatically in the late 19th century when Thomas Nast began illustrating St. Nick as a fat, jolly elf-like character for Harper's Weekly.

People originally saw St. Nicholas, the patron saint of children, as a gift-giving old man who rode a white horse and gave goodies to children. Father Christmas took the initial image of St. Nicholas and gave it a twist, making him an old bearded man who doled out punishments as well as rewards.

Residents of certain parts of Germany saw Christkindchen, the German Christ child, as a gift giver. The English butchered the pronunciation of the name, so that today he’s popularly known as Kris Kringle. This figure traditionally wore a white robe and a white jeweled crown, traveling the countryside on a mule. He was said to have been accompanied by Pelze Nicol, a boy with a blackened face. Yet even Pelze Nicol developed into his own personality, becoming Belsnickle, a sinister-looking Santa who punished bad children.

Important scientific discoveries have also been incorporated into these Christmas figures, the most notable being the invention of the light bulb. Between1907 and 1910, the Germans made Santa candy containers featuring an electric lantern strapped to Santa's chest. The figure also held a feather tree decorated with three electric bulbs. A battery operated all four lights.

Likewise, Santa's means of transportation hasn't remained static over the years. Some candy containers show Santa on a sheep, donkey or mule, while others had him riding a sleigh made of moss. The Germans crafted log sleighs with the bed of the sleigh large enough to hold both candy and small wooden toys known as Ergebirge.

Where makers placed the candy and dried fruit and how they made them accessible varied from one container to another. Santas also carried different types of baskets. Some simply had a cloth or felt bag for goodies. Some candy containers came in two pieces, having removable heads or a cardboard tube that separated when Santa's legs and torso, enabling them to be pulled apart. Other examples, such as those showing Santa on a chimney, had a plug on the bottom or a paper seal.

Regardless of the type, people gave Santa candy containers mostly as gifts. After the receiver ate the  candy, they used the container as a holiday decoration. Even though people brought out these Santas for the holidays each year, they could be easily damaged not only by overzealous children allowed to play with the Santas, but also by prolonged exposure to sunlight. While children might physically destroy the candy container, the sun did consider-able harm by fading bright-red coats to a light-brown or turning the interior of the garment from purple to blue.

What destroyed the great artistry of German candy containers, however, was competition from foreign countries. By the 1920s the public was more willing to accept plainer-looking Santas, and the Japanese provided them. Although the Japanese based their candy containers on German examples, the fine details soon became too expensive to produce. The public accepted cheaper imitations, trading savings for a loss in quality.

It's that loss of true artistry over the years that makes vintage German-made Santa candy containers so collectible today. Prices begin at about $375 but rarer ones often sell for several thousand dollars.

Tuesday, December 2, 2014

A Little Piece of Home



QUESTION:  Recently I discovered a well-worn copy of the Bible dated 1861 while going through an old trunk left to me by my father. He said it belonged to his father and his father before that. What’s intriguing about this Bible is the inscription inside: “Presented to John C. Gillespie of Carlisle, Pennsylvania, to take with him to the field of battle, June 1, 1861.” Can you tell me why my great grandfather would have had such a Bible and why it has been handed down all these years?

ANSWER: Bibles are often what bind families together, even today. This occurred even more during the 19th century, when each person may have had their own personal copy. But this Bible, I suspect, was special, for it belonged to a Union soldier who fought in the Civil War. It’s something he carried with him into battle and which he kept his entire life, passing it down to future generations, after one of the most traumatic experiences of his life.

The Civil War continues to fascinate generation after generation. And with this fascination comes a desire to own a piece of the war, to hold on to a bit of its history.

A collection of Civil War memorabilia often begins with the purchase of a 25-cent minie ball, picked up as an inexpensive souvenir after touring a battlefield. Other people  become collectors after participating in re-enactments, as they replace reproduction articles with the real thing. Still others, perhaps like yourself, become collectors because descendants have passed down items that they carried into battle.

Collections of Civil War memorabilia can be broken into three general categories. Most collectors focus on weapons. Others specialize in collecting military uniforms, as well as associated items such as buttons, patches, badges, buckles, and hats.

And some collect the personal effects of those who left their homes and fought their neighbors on the battlefields of their own country. It’s often these homely objects that intensify the romantic appeal of this horrific war. Collecting what soldiers carried with them to war provides an intimate glimpse into their lives.

Volunteers, assembled in a short period of time, comprised most of the armies of both of the Union and the Confederacy. Men—or more often boys in their teens—reported for duty with hastily gathered supplies, and there was little uniformity about what they brought from home. Although each state was expected to supply its fighting forces with necessities, it was often the mothers, wives, sisters, a and girlfriends who were responsible for the materials that the soldiers actually brought with them when they reported for duty. As a result, there was a great variety of items included in the soldiers' personal effects.

With little idea of how the war would eventually be fought, new recruits generally overpacked, and soon found it necessary to shed their excess personal belongings as the war stretched on. These early recruits often reported with items intended to create a home away from home. Consequently, silver knives and forks, pincushions, and even embroidered booties found their way into camp. The soldiers didn’t anticipate years of war—early recruits signed up for only a few months—and the ensuing movements resulted in the abandonment of these niceties.

Identifying Civil War personal effects has been made easier because most of the soldiers marked their belongings with their names and regiments.

In addition to the items which soldiers brought from home, camp visitors gave soldiers  gifts of food, towels and soap, blankets, hammocks, tobacco and pipes, and pills. Soldiers traded their watches for some of these items. And even though the typical soldier would have appreciated more useful items, god-fearing visitors often distributed  religious tracts. Some gave soldiers sewing kits called "housewives," with which they spent idle hours mending and repairing their clothing. The soldiers played various games, including a primitive form of baseball, as well as poker and cribbage, chess and checkers, dominoes and marbles, and even bet on dice.

As the war stretched on and soldiers found themselves depleting their personal supplies brought from home, they turned to sutlers to replenish their need. Both Union and Confederate governors granted special permits to these civilian merchants. They accompanied the armies with horse-drawn wagons and sold, often at a great profit, the personal items a soldier would find in his pockets or haversack.

Articles owned by soldiers on either side differed little. Instead, social class and military rank are what determined the kinds of items the men carried,, Wealthier men, especially those with higher military ranks, were more likely to carry finer things, more things, and things not absolutely essential to day-to-day existence. On the other hand, many of the ordinary soldiers were poor men, often farmers, or recent immigrants from Ireland or Germany. Their possessions were far more modest.

One accessory common to most soldiers was a wallet, usually of folded leather, lined in linen and held together with a leather strap. Soldiers carried their money—generally not much, as a private's pay was typically $9 a month—and photographs of those at home in their wallets. Leather wallets in very good condition sell for about $65.

Another item that most soldiers carried into battle was a copy of the Bible. These  pocket-sized books are often found in poor condition today because of the amount of use they received. Inscriptions increase their value.  A typical Civil War Bible sells for about $75.

And they wrote. Soldiers of the Civil War kept extensive diaries, and maintained regular correspondence with friends and loved ones at home. Many of the envelopes they used are of particular note with patriotic scenes depicted on them, as are the many writing implements and accessories. Ordinary soldiers wrote on paper with wooden lead pencils, which they purchased from sutlers for a few cents or received as gifts.
Officers, however, often included writing sets in their holdings. Many carried bottles of ink—glass bottles covered in materials like leather to prevent breakage—and pens which, being made of a breakable material, rested in brass tube-like protective cases. Today, uncut Civil War-issued pencils can be had for $5 to $10, and fancy pens in brass cases bring $45.

Pens weren’t the only things transported in protective cases. Whiskey flasks were often covered in leather and encased in silver or pewter. Collapsible tin or pewter cups rested in little tin cases with snap-on lids. Other personally-supplied mess pieces commonly found include combination knife-fork-spoon utensils and plates.

On a more personal level were the items that soldiers carried in leather toilet kits tucked inside their haversacks. Toiletry items such as toothbrushes, tooth-cleaning powder (little more than baking soda), hand soap and shaving soap, brushes, and  mirrors were often packed in these kits. In many a soldier's pack was at least one straight razor with a bone or ivory handle, even though beards were in style.

Each article tells a story, has a message, is worthwhile keeping. The Civil War is about people. Those who fought it are no longer here to tell us about it. So the next best thing is to collect the items they carried.