Give Antique Boxes Renewed Life Through Restoration

 

QUESTION: I have collected antiques for years. I got my start with a writing box I bought in England. But the box needed some tender loving care, so I decided to try restoring it. The most noticeable problem were a couple of missing corner angles on the lid. Do you think the angles were made of brass?  The depth of the voids is about 3 mm. The box, itself, is showing signs of wear. What would you suggest I do to restore it?

ANSWER: Whether or not to refinish an antique box depends on several things, including its condition, value, and what you plan to do with it. Unlike antique furniture, especially pieces made before 1830, antique boxes often require some restoration which actually adds to their value.

The corners on your box would have been brass, so if you can find someone to make these for you, they should be easy to replace. Be sure to glue them with a strong glue. Box makers usually used brass on the corners of better boxes to protect them while traveling. Victorians took writing and other types of boxes along on long trips so that they could communicate to their friends and family back home. It’s not unusual to find boxes from this time period in poor condition. Restoring them isn’t as difficult as doing furniture but can be challenging.

Antique boxes acted as portable storage workhorses for past generations. They served a variety of purposes from document boxes in which to keep valuable papers to writing boxes for correspondence to dressing boxes for grooming while traveling to tea caddies for storing precious tea. Victorians, in particular, loved boxes, and people from all classes used them.

Unfortunately, people handled boxes a lot, so most antique ones aren’t in the greatest shape. Some boxes may have sat on a table in front of a window in the sunlight and became faded over time while others suffered from neglect.

A good example is an Indian sadeli mosaic-covered writing box that outlived its usefulness. Someone decided that instead of tossing it out, they would give it to their children to play with. The children drew all over the beautiful mosaic with crayons and someone did a bad job of pasting a piece of chartreuse felt over the writing surface on the inside. Needless to say, this restoration wasn’t a walk in the park.

Unlike antique furniture made before 1830, many antique boxes will benefit greatly with even modest restoration. And since they’re not large, it doesn’t take a lot of materials or time to restore them.

A 1920’s Cave a Liqueur, a portable liqueur cabinet, was empty and in poor condition when purchased.. In this case, the box needed basic refinishing, but there was nothing inside. Sometimes, it’s necessary to be on the lookout for pieces that will help bring a box back to its almost new state—in this case a crystal liqueur set. Writing boxes usually need replacement inkwells, pens, etc. While it’s possible to find new replacements, it’s more fun to look for antique pieces to fill a particular box.

While restoration usually begins with reviving the wood of the box’s body, it also takes in exterior decorations made of ivory, tortoiseshell, and mother-of-pearl. These materials are all fragile and should be checked for cracks, abrasions, and chips. Metal ornamentation may be missing, dented or creased, or it may just need polishing. Veneers and inlay are much more difficult to repair and may require professional assistance.

Antique boxes also contain small and sometimes specialized hinges and locks that must also be examined for repair, restoration, or replacement. Finding replacements can be a real challenge since many of these may have been made for a particular box.

But minor conservation can do wonders for an antique box. First, tighten any loose screws and gently tap in any loose nails. Repair loose joints with wood glue. Finally, clean the box with a soft lint-free cloth dampened with Murphy’s Oil Soap solution. Do a small area at a time and use another lint-free cloth to dry it. After letting the box dry thoroughly for 24 hours, give it two coats of Minwax paste wax to protect the exterior. Follow the directions on the can.

Dust the interior of the box with a soft shaving brush. If the wood is bare, as with some inner areas of the box, switch to a solvent-based cleaner. Use a toothbrush or toothpick to clean out any crevices. If this has markedly improved the box’s appearance, then it may be a good time to stop.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "In the Good Ole Summertime" in the 2024 Summer Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Water, Water Everywhere

QUESTION: I discovered this unique water bottle at a local antiques co-op. While most antique water decanters are solid cut or pressed glass, this one comes apart into two pieces. A metal ring, with a rubber gasket to make the seal tight, screws onto the base. The mark on the bottom edge of the top section reads: Perfection Bottle Co., Wilkes-Barre, PA Pat March 30-97. What can you tell me about this type of water bottle?

ANSWER: You, indeed, have found a unique water bottle. Though a revolutionary idea, this type of water bottle appeared in stores for only a few years.

From the mid-19th century to the early 20th century, water bottles were standard items in many American Victorian households. They appeared on dinner tables either alone or with matching glasses and in bedrooms often with a glass that set upside down over the top of the bottle. They also could be found on the nightstands in hotel rooms and steamship cabins, and on tables in railroad lounge cars.

At first, manufacturers made them of elegant cut glass, but that was too expensive for the average person. Some turned to using pressed glass in a variety of patterns which lowered their cost.

However, cleaning these crystal beauties posed a serious problem with hygiene. The bottle’s narrow neck made it hard to get a brush down into it, making it almost impossible to clean the inside surface of the bottle’s bulbous interior. But that changed in 1896 when William B. Fenn came up with the idea of a separating water bottle—one with pieces that could unscrew for easy cleaning. On March 30 of the following year, he applied for and received a patent for it.

Fenn’s separating water bottle had an ingenious design. He made the neck and base two separate pieces, with the bottom edge of the neck fitting inside the top rim of the base. A rubber gasket formed a waterproof seal between the two parts and a metal ring screwed over the joint to lock the pieces in place.

Even though Fenn used glass for his original design, he stipulated in his patent that any material, including ceramics and porcelain, could be used for the bottle, itself, and any metal could be used for the joining ring as long it wouldn’t corrode.

It took nearly three years for Fenn's" bottle to be available to the public.,Priced at $4.50 each when they first came on the market in 1900, they were well beyond the means of the average person. Realizing he had to do something to increase sales, Fenn redesigned the pattern on the bottle so that it could be pressed instead of cut. Suddenly, the price per bottle dropped to 50 cents per bottle, or 34 cents each for a dozen, making the Fenn water bottle affordable for everyone.

Fenn’s invention was so successful that he decided to expand production. By October,1902, consumers could purchase a decanter and stopper in four sizes—half pint, and one, two and three-pint versions. And during 1903; He expanded the line further to include other glass containers, such as   syrup pitchers and cruets, as well as bitters, cologne, and barber bottles, each with a different pattern.

The separating water bottle came in three models—the Royal, with a delicate design imitating cut crystal, the Imperial, also sold in two and three-pint capacities but without a pattern, the Optic, with a succession of single, convex protruding, vertical panels with rounded tops and bottoms, and the Colonial, featuring nine rounded panels with flat bottoms around the base. Each came in two and three-pint sizes, except the Colonial which also came in a half-gallon size.

In 1903, the Perfection Water Bottle Co. and the Sterling Glass Co. combined to create the Perfection Glass.Co. of Washington, Pennsylvania, with William Fenn as one of the initial investors. But the new company was only to last until 1907 when it closed its doors for lack of sales.