A Little Box Named After the Roman Goddess of Fire

 

QUESTION: A few months ago, I was out antiquing and came across several little silver boxes in an antique shop. They didn’t seem to have an obvious use, as they were too small to fit much in. The owner of the shop told me they were vesta cases and that they used to hold matches back in the 19th century. One had been decorated in repousse while the other two were rather plain. What can you tell me about these little boxes? Are they worth collecting?

ANSWER: Vesta cases were small portable boxes, made from precious and non-precious metals,  used to keep matches dry and to prevent them from igniting. Usually the base of the vesta case had a serrated edge, known as the striker. The user dragged the matches, called vestas, across the striker to ignite them. And, yes, they’re highly collectible.

Vesta cases first appeared in 1832 when an Englishman named William Newton patented a match he called the wax “vesta.” The vesta, also called a “strike anywhere match,” had a tip of phosphorus and a wax stem over cotton threads. As the name suggests, these matches would ignite when struck on different surfaces, making them prone to accidental combustion. So they needed to be enclosed in a metal case. 

Named for Vesta, the Roman goddess of fire, home, hearth and family, vesta cases often depicted her as the fire in her temple. In the United States, vesta cases became known as match safes because they kept matches safe in a non-flammable case. 

Before the invention of safety matches, matches were often struck on rough surfaces, but they were also highly susceptible to moisture. Vesta cases protected matches from both dampness and damage.

There were three main types of vesta cases—portable pocket vestas, table or mounted vestas, and “go to bed” vestas. Men often hung a pocket vesta from their watch fob chain. People kept a larger table vestas near fireplaces around their homes, as well as by the kitchen stove. And they used a “go to bed” vesta, attached to a chamberstick, to light their way to their bedroom at night. .

Manufacturers made vesta cases from a variety of materials, including silver, brass, tin, gunmetal, nickel silver,  ivory, bone, tortoiseshell, gold, pewter, and enamel. The more unusual materials included leather, wood, horn, and ceramics for table vestas. Wealthy individuals often commissioned custom cases with intricate designs, engravings, or even gemstone embellishments, transforming a practical item into a work of art.

Although most manufacturers produced vesta cases of less expensive materials, most often brass or nickel silver, thus making them more affordable, sterling silver was perhaps the most common material, especially in England. Wealthier users often carried vestas made of  gold or decorated with enamel. More expensive vestas often had a gold wash interior to prevent corrosion by the chemically active match heads.

Silver vesta cases, often hallmarked and intricately engraved, featured repoussé work, , adding texture and visual interest. People could also purchase enameled vesta cases,  adorned with miniature paintings, floral motifs, or whimsical scenes.

Besides being rectangular, vesta cases came in many different shapes and decorations. As well as plain and decorated square, oblong and round cases, many came in novelty shapes. Silver, brass, or white metal pigs with hinged heads were popular, as were vesta cases in the form of Mr Punch, hearts, skulls, books, musical instruments, owls, boots and shoes, bottles, suitcases, birds, ladies' legs, and so on. Sporting decorations were also common, especially for golf and cricket, as were hunting scenes and armorial decorations.

Jewelers often engraved decorations into metal vestas, with floreate patterns the most common, though they sometimes used other techniques, including repoussé and chasing, guilloché, engine turning, cloisonné, cold-painting, enameling and niello for more expensive cases.

Wealthier people commissioned or purchased hallmarked gold or silver vesta cases which a jeweler would often personalize by inscribing their initials in a cartouche on the front. 

As well as being status symbols, vesta case were an excellent form of advertising.  Prestigious companies engaged master silversmiths to craft vesta cases from precious metals to promote their famous brands.

During the late 19th and early 20th centuries, manufacturers created vesta cases to celebrate special events such as commemorating Queen Victoria’s Jubilee Anniversary or promoting companies, serving as a form of advertising. Vesta cases also promoted  cigar and tobacco brands, as well as commemorated moments in history. Many vesta cases were miniature works of art, with beautiful craftsmanship. 

Manufacturers worldwide, including those in the United Kingdom, in the U.S.A., continental Europe, Japan and Australia, produced vesta cases. Noted English goldsmiths such as Charles Murat, Asprey, Mappin & Webb, and William Neale & Sons and Sampson Mordan, also crafted sterling silver vesta cases for discerning clients.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Roman Arts and Culture" in the 2025 Winter Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Gaudy Welsh—Cheerful, Cheap, and Colorful

 

QUESTION: My grandmother loved to collect pieces of china. Among her pieces, which have now been passed on to me, are several brightly colored and decorated ones with a slight copper-like tone to the decorative glaze. Can you tell me what they are and a bit about their history? 

ANSWER: What you have are pieces of Gaudy Welsh pottery. And while some of it had been made in Wales, the majority originated in the potteries of Staffordshire, England. 

American collectors and antique dealers coined the name Gaudy Welsh after World War II. British collectors called the ware Welsh Lusterware, Peasant Enamel, Swansea Cottage, or simply cottage ware, to distinguish it from early 19th-century wares designed to sell to English small town and rural cottage residents.

Gaudy Welsh was inexpensive—pieces sold for pennies—making it appealing to lower and middle-income families. Collectors often refer to it as cheerful, cheap, and colorful. Pottery factories used a variety of ceramic bodies, including bone china, creamware, and ironstone.

Forms include bowls, cake plates, chamber pots, creamers an sugars, cups and saucers, fruit bowls, jugs, mugs, pitches, plates, punch bowls, soup bowls, teapots, toddies, vases, and slop bowls, intended as receptacles for used tea leaves.

Although most manufacturers stopped producing Gaudy Welsh by the 1860s, some continued production into the early 20th century.

Over 150 factories produced Gaudy Welsh pottery, from Scotland's Anderson Glasgow Pottery, to Yorkshires Turpin and Company. However only a small percentage of Gaudy Welsh ware came from factories in Wales. The motif appears to have originated with Llanelly and Swansea. Newcastle and Sunderland firms also made it. The majority of the ware produced by ceramic manufacturers such as Allertons and Copeland in Staffordshire potteries.

Potteries employed different combinations of ingredients to produce Gaudy Welsh. Finished pieces ranged from the least expensive earthenware to cream-ware to ironstone and finally to the most expensive 

Potteries fired Gaudy Welsh ware three times, each at a different temperature. The first firing fused the bodies, and following workers removed any roughness was removed what was then known as biscuit ware.

Biscuit ware provided the surface for decoration. Artisans applied a cobalt blue underglaze, then dipped the pieces in glaze before the second firing or fixing. This glaze provided a glossy surface which decorators then painted with copper luster and enamel colors. The third firing set the luster and colors.

Depending on the sourcing of clay and different recipes used, Gaudy 'bodies' had different thickness and weight, causing it to vary from opaque to translucent. 

Hand painting Gaudy Welsh pottery posed special technical challenges. Cobalt blue was a dirty brown when applied before the second firing which brought out its blue/purple color. Enamels and luster were almost translucent when applied before the final firing. Women and children did most of the decorating either in small factories or in their homes.

Welsh potteries made many Gaudy Welsh jugs in the 1820s and 1830s, causing ceramic historians to believe that they were made in Wales for the local market. These jugs generally included the earliest patterns. The most common tea service pattern was Tulip which had eight variations. This pattern is the best known in Wales. But Staffordshire potteries produced  most of the tea services.

Gaudy Welsh ware had a very specific palette of colors. Its palette included cobalt blue underglaze, with a pink luster that appeared copper when applied overglaze onto the cobalt blue, and russet.

Potters used yellow sparingly or not at all on Gaudy Welsh patterns, shading from a light to lemon yellow hue. Gaudy Welsh greens ranged from pale yellow green to a dark green. Russet or burnt orange ranged from a vibrant hue to a very subtle shading. Incorporated with blue, where the white color of the object was allowed to show in some patterns, revealing a very attractive contrast. Artisans used cobalt blue underglaze over wide surface areas of Gaudy Welsh borders as leaves, panels, vines and stems, for motifs, and as scrolling. Decorators employed pink sparingly. 

Gaudy Welsh ware became known for its large number of patterns and variation of design within patterns. Antique experts estimate that there were 460 different patterns produced. However, some patterns, such as Grape, Hexagon, Tulip, and Vine, had more than one design, and Tulip, one of the most common patterns, had eight variations of design. Different executions of the one pattern weren’t identical as they were individually outlined and hand painted. Ironically, makers of Gaudy Welsh pottery didn’t name patterns at the time of manufacture.

Over time, collectors created pattern names after what the design represented, such as particular flowers. Other patterns had been named after villages and towns in Wales. Pattern names run the gamut---Angels Trumpet, Buckle, Columbine, Feather, Garland, Grape, Oyster, Sunflower, Tulip, and Sea Wave. Most patterns are unnamed. Motifs also could include birds, cartouches, fences, flower petals, panels, and trees. .

Gaudy Welsh designs were vivid and predominantly resemble Asian depictions of flowers such as anemones, poppies, tulips, roses, peonies and cherry blossoms. Some designs were abstract with vertical stripes or lattices. Similarities occurred in a many designs, including panels, cartouches, fences, grape leaves and flower petals.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Return to Toyland" in the 2024 Holiday Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Flashing the Way to Popularity

 

QUESTION: I recently purchased a mug that seems to be made of cut glass with red band and gold decoration at a local antique coop. Is this ruby glass? 

ANSWER: What you have is a mug of ruby stained glass, in which artisans painted a piece of pressed glass with a solution that turned red after firing a second time. True ruby glass is red all the way through. Glass makers originally created the deep ruby red color by adding gold, but that was rather expensive, making this type of glass costly. 

Bohemian glass makers discovered ruby glass in the second half of the 17th century when Bohemian glass makers, in their effort to imitate Venetian glass, had only a colorless potash-lime glass with which to work. And although it could be decorated, colored glass wasn’t possible.

Then someone discovered that glass could be colored red by adding an oxide of gold to the formula. As it came out of the pot it was amber, but when articles made in it were reheated they became a clear and true red.

For a time this art seemed to have been lost, but Bohemian glass makers began making ruby glass again at the beginning of the 19th Century, but instead of being solid colored, they made pieces of colorless glass, then encased them with a thin layer of red.

Ruby flash was a less expensive way to produce the glass within the blowing process. Glassblowers would blow glass a bit, then cool it, after which they dipped it into molten red glass, producing a layer of red over the clear glass. The coating on the clear glass consisted of a chemical solution containing copper sulfide that glass makers baked in a kiln, turning the coating bright red. With ruby flash glass, the entire piece of clear class became covered in red glass. 

This allowed a glass company to make pressed glass “blanks” and sell them to finishing companies, whose artisans would engrave patterns in the red coating, revealing the clear glass underneath. It’s this flashed glass, made around 1850, that’s commonly known today. Because of its two layers of glass, as it were, ruby flash glass offered an opportunity for dramatic cutting and engraving, the pattern showing up in the clear glass against the ruby ground. American glass makers went to work to imitate it and called it “Bohemian.”

Sometimes, glass companies “flashed” entire sets of dinnerware, occasionally adding  touches of gold. Ruby flash’s popularity began to decline around 1929, probably due to the onset of the Great Depression.  

Of the various patterns of ruby flash glass, "King's Crown" was the most common.  Several different glass companies made a variation of King's Crown.  The name comes from the zig-zag design, like the top of a crown. Other popular patterns included  “Ruby Thumbprint,” “Prize,” “Crystal Wedding” “Heart Band.” 

While glass makers used ruby glass for decorative wares—vases, urns, bottles, bowls, candy dishes, etc. It was also used for tableware such as goblets, wines, carafes, cordial sets, finger-bowls, fruit bowls, compotes and the like. Glass makers also produced dresser pieces, such as perfume bottles and pomade jars, as well as lamps and candlesticks in the rich red glass.

Smaller items, sold as souvenirs, such as toothpick holders, tumblers, goblets, creamers and pitchers, were made in ruby-stained glass. Staining a piece of glass involved painting an already-pressed piece of clear pattern glass with a ruby-colored stain and reheating it to 1,000 degrees in a kiln which turned the coating bright red.

This enabled sellers to engrave a piece through its thin red coating with the name of a destination and the date, thus making the clear glass shine through. Glass makers created thousands of these small articles for the large expositions, such as the Chicago World’s Fair in 1893, as well as popular county fairs.

One of the more popular ruby stained patterns, Button Arches, introduced originally around 1898, continued in production until the 1960s and 1970s. The design consisted of slightly overlapping pointed arches around the bottom edges and covers of pieces, each arch containing tightly packed "buttons." 

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Return to Toyland" in the 2024 Holiday Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Brooching the Subject

 

QUESTION: While antiquing on a recent weekend, I came across a shop with a display case full of antique brooches. And while I’ve seen old brooches before, I never saw this many together. That got me to wonder how the brooch came to be. What can you tell me about the origin and history of the brooch?

ANSWER: Brooches have a long history dating back to the Bronze Age, originally serving as  fasteners for clothing before evolving into decorative jewelry. Over the centuries, they have been made from various materials and have reflected changing fashions and social status. Brooches became especially popular during Victorian times.

Brooches have  usually been made of silver or gold, decorated with enamel or with gemstones and may have been solely ornamental or serve as a clothes fastener. As fashions in brooches changed quickly, they became historical indicators.  

Before the Middle Ages, brooches were called fibula. With a lack of buttons, they were necessary as clothes fasteners, but also acted as markers of social status for both men and women. During the Iron Age in Europe, metalworking technology advanced dramatically, including casting, metal bar-twisting and wire making. As early as 400 BCE,  Celtic craftsmen in Europe created fibulae decorated in red enamel and coral inlay.

Brooches first appeared in Britain in 600 BCE, lasting until 150 BCE. The most common brooch forms during this time were the bow, the plate, and the penannular brooch. Most of these were cast in one piece, with most from copper alloy or iron. The brooches of this era show Roman jewelry techniques, including repoussé, filigree, granulation, enameling, openwork and inlay. Color was the primary feature of brooches of this period. The precious stone most often used was the almandine, a burgundy variety of garnet, found in Europe and India. Designers would cover the entire surface of an object with the tiny geometric shapes of precious stones or enamel which artisans then polished flat until they were flush with the cloisonné settings, giving the appearance of a tiny stained glass window.

Artisans used many variations in their brooch designs---geometric decoration, intricate patterns, abstract designs from nature, bird motifs and running scrolls. Intertwined beasts were often a signature feature of these intricately decorated brooches. Bow shaped, S-shaped, radiate-headed and decorated disc brooches were the most common styles from the 5th through the 7th centuries. 

Circular brooches first appeared in England in the middle of the 5th century. And by the end of the 6th century, the circular form had become the preferred brooch shape.

Celtic brooches represent a tradition of elaborately decorated penannular and pseudo-penannular types developed in early medieval Ireland and Scotland. However, certain characteristics of Celtic jewelry, such as inlaid millefiori glass and curvilinear styles, have more in common with ancient brooches than contemporary Anglo-Saxon jewelry. 

Scandinavian brooches, generally made of silver and copper alloy, embraced the Germanic animal style of decoration in the Middle Ages. This decorative style originated in Denmark in the late 5th century as a response to late Roman metalwork. 

Viking craftsmen decorated their brooches in one or more of the Viking styles---Oseberg, Borre, Jellinge, Mammen, Ringerike and Urnes. Viking brooches came in seven different forms---circular, bird-shaped, oval, equal-armed, trefoil, lozenge-shaped, and domed disc. Designs featured a variety of decoration, including interlaced gripping beasts, single animal motifs, ribbon-shaped animals, knot and ring-chain patterns, tendrils, and leaf, beast and bird motifs.

Both men and women wore brooches during the late medieval period from 1300 to 1500. Brooches were star-shaped, pentagonal, lobed, wheel, heart-shaped, and ring.  Smaller than other brooches, ring brooches often fastened clothing at the neck. Brooch decoration usually consisted of a simple inscription or gems applied to a gold or silver base. Inscriptions of love, friendship and faith were a typical of ring brooches of this time. Heart-shaped brooches were a popular gift between lovers or friends.

The Renaissance, lasting from 1300 to 1600, was a time of wealth and opulence in the Mediterranean region. Elaborate brooches covered in emeralds, diamonds, rubies, amethyst and topaz or pearls were in fashion, especially with the upper classes.  Brooches with religious motifs and enameled miniature portraits were also popular.

By the beginning of the 18th century ornate brooches made of gold and silver with complex designs were fashionable. By the mid- to late 1700s, simpler forms and designs were more common, with simpler themes of nature, bows, miniature portraits and animals.  

Brooches made during the Neoclassical Period, between 1760 and 1830, featured  classical themes of ancient Greece and Rome. The main difference between Renaissance brooches and Neoclassical jones were that artisans created Renaissance brooches primarily for the upper class and Neoclassical ones for the general public. 

English pottery manufacturer Josiah Wedgwood produced cameo brooches in black basalt and jasper. Cameos and brooches with classical scenes were fashionable during this period.

Cameos, locket brooches, flowers, nature, animal and hearts were popular in the early Victorian era. When Victoria's husband, Prince Albert, died in 1861, brooch design changed to reflect the queen in mourning. Styles turned heavier and more somber, using materials like black enamel, jet, and black onyx.

It was fashionable during this period to incorporate hair and portraiture into a brooch. The practice began as an expression of mourning, then expanded to keepsakes of loved ones who were living. Artisans encased human hair encased within a brooch or braided and wove it into a band to which they attached clasps.

By the early 20th century, brooches appeared with diamonds, typically with platinum or white gold, and colored gemstones or pearls. Popular brooch forms included bows, ribbons, swags, and garlands, all in the delicate new style.

The Art Deco style found a place in modern brooch design. Common decoration included geometric shapes, abstract designs, designs from Cubism, Fauvism, and art motifs from Egypt and India. Artisans used black onyx, coral, quartz, lapis and carnelian along with diamonds, rubies, emeralds, and sapphires. 

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "Return to Toyland" in the 2024 Holiday Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.