Water, Water Everywhere

 

Fenn water bottle with ring

QUESTION: I discovered this unique water bottle at a local antiques co-op. While most antique water decanters are solid cut or pressed glass, this one comes apart into two pieces. A metal ring, with a rubber gasket to make the seal tight, screws onto the base. The mark on the bottom edge of the top section reads: “Perfection Bottle Co., Wilkes-Barre, PA Pat March 30-97.op part.”  What can you tell me about this type of water bottle?

ANSWER: You, indeed, have found a unique water bottle. Though a revolutionary idea, this type of water bottle appeared in stores for only a few years.

From the mid-19th century to the early 20th century, water bottles were standard items in many American Victorian households. They appeared on dinner tables either alone or with matching glasses and in bedrooms often with a glass that sat upside down over the top of the bottle. They also could be found on the nightstands in hotel rooms and steamship cabins, and on tables in railroad lounge cars. 

Cut glass crystal water bottle

At first, manufacturers made them of elegant cut glass, but that was too expensive for the average person. Some turned to using pressed glass in a variety of patterns which lowered their cost.

However, cleaning these crystal beauties posed a serious problem with hygiene. The bottle’s narrow neck made it hard to get a brush down into it, making it almost impossible to clean the inside surface of the bottle’s bulbous interior. But that changed in 1896 when William B. Fenn came up with the idea of a separating water bottle—one with pieces that could unscrew for easy cleaning.  On March 30 of the following year,  he applied for and received a patent for it.

Fenn’s separating water bottle had an ingenious design. He made the neck and base two separate pieces, with the bottom edge of the neck fitting inside the top rim of the base. A rubber gasket formed a waterproof seal between the two parts and a metal ring screwed over the joint to lock the pieces in place. 

Ceramic water bottle

Even though Fenn used glass for his original design, he stipulated in his patent that any material, including ceramics and porcelain, could be used for the bottle, itself, and any metal could be used for the joining ring as long it wouldn’t corrode.

It took nearly three years for Fenn's bottle to be available to the public. Priced at $4.50 each when they first came on the market in 1900, they were well beyond the means of the average person. Realizing he had to do something to increase sales, Fenn redesigned the pattern on the bottle so that it could be pressed instead of cut. Suddenly, the price per bottle dropped to 50 cents per bottle, or 34 cents each for a dozen, making the Fenn water bottle affordable for everyone.

Fenn’s invention was so successful that he decided to expand production. By October,1902, consumers could purchase a decanter

Fenn Royal water bottle

and stopper in four sizes—half pint, and one, two and three-pint versions. And during 1903; He expanded the line further to include other glass containers, such as   syrup pitchers and cruets, as well as bitters, cologne, and barber bottles, each with a different pattern.

The separating water bottle came in three models—the Royal, with a delicate design imitating cut crystal, the Imperial, also sold in two and three-pint capacities but without a pattern, the Optic, with a succession of single, convex protruding, vertical panels with rounded tops and bottoms, and the Colonial, featuring nine rounded panels with flat bottoms around the base. Each came in two and three-pint sizes, except the Colonial which also came in a half-gallon size.

In 1903, the Perfection Water Bottle Company and the Sterling Glass Company combined to create the Perfection Glass Company of Washington, Pennsylvania, with William Fenn as one of the initial investors. But the new company was only to last until 1907 when it closed its doors for lack of sales.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about  world's fairs in the 2020 Summer Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Puff, Puff, Puffing Along

QUESTION: I’m an engineer who has recently retired. Not long ago, I saw some steam-powered toys on display at a local antique show. The dealer couldn’t tell me much about them except that they were produced in the latter part of the 19th century.  I’m fascinated with these toys and would like to start a collection. What can you tell me about them?

ANSWER: Live steam-driven toys have always fascinated young boys and men. It’s probably because of the power they produce and that they’re often so close to the original devices that use steam power to operate.

The use of steam as a power source dates from the early 1840s. By the mid-19th century, steam-powered toys began to appear. Craftsmen hand built toy steam engines for the first 50 years or so and definitely for those who could afford their high price tag. Cheaper models began to appear in the 1870s. By that time, makers constructed stationary engines with the boiler in either a vertical or horizontal position, although the functions of each were essentially the same. The vertical model fit into a smaller space while the horizontal model allowed greater size and power. Though toy engines were often faithful duplicates of the real thing, they rarely had the detail of true scale models.

Such famous toy makers as Bing, Doll and Marklin produced steam-powered toys in Germany. The British manufactured some beautiful examples under the label of Bassett-Lowke. In America, Eugene Beggs of Paterson, New Jersey turned out these mechanical wonders from the 1870s to about 1900 in competition with the famous Ives company of Bridgeport, Connecticut. The best known of all the American firms was the
Weeden Manufacturing Company which manufactured steam-powered toys from  1883 to 1930 in New Bedford, Massachusetts. Other manufacturers included Mamod, Wilesco, Cheddar, Krick, Tucher & Walther, Hermann Bohm, and Blechspielzeug.

The boiler of a steam toy had to be carefully filled with mineral-free water, often from a rainwater barrel. Most of the burners or lamps used alcohol as fuel although manufacturers advertised a few that burned kerosene.

Both substances were highly flammable but not explosive in the open air. Once the user lit the burner and shoved it into place beneath the boiler, it was just a matter of waiting while steam formed in the boiler and pressure gradually increased. When steamed up, the throttle opened, wheels began to spin, and pulleys operated the accessories. And, of course, every steam engine came with a whistle.

Steam-powered trains were a bit more complicated. Many became known as "dribblers" because water often leaked from the boiler. Though the user set a throttle in advance,  there was tittle or no speed control once the locomotive got under way. Once steam had built up, the user set the train on the tracks and let it go until the fuel and water ran out. Often the engine would fly off the rails on a tight curve, spilling the water and burning alcohol. Makers advertised these trains as “safe” toys, since they rarely blew up unless an ingenious boy locked down the safety valve. However, the engines got very hot, enough to produce a nasty burn. Since boys often set up these trains on their mom’s carpet, a derailment and spill often resulted in a good scolding.

Steam-powered boats, on the other hand, were graceful toys, often beautifully constructed of brass. Manufacturers built them around a horizontal boiler with a burner beneath. Steam traveled through a pipe to a cylinder and piston which operated the propeller shaft. An adjustable ruder provided some control but there was always a risk of losing the boat once it got under way. Boys could purchase flimsy tinplate steam motorboats in dime and novelty stores. This toy had a burner and boiler but no cylinder. The steam traveled directly to the stern of the boat and exhausted underwater, propelling the boat until all the steam was used up. Boys called them "put-puts while they referred to more elaborate models as propellers.

By 1886, a boys could purchase a toy steam engine with a vertical boiler from Montgomery Ward for 40 cents plus a nickel for postage. Larger horizontal engines with a walking beam and a flywheel sold for $2. From the same catalog, boys could order a toy steamboat in the 9-inch size packed in a "neat wooden box" for $1.25 or a 13-inch model which ran about 20 minutes for $2.60. In 1888, Ladies' Home Journal provided a Weeden upright steam engine made from 41 pieces at no cost with a subscription. Or the lucky young person could buy an 11-inch steamboat directly from the magazine for $1.50 postpaid.

In 1889 it was possible to buy an upright steam engine from Ward’s catalog for 20 cents but more elaborate engines cost as much as $11. A popular steam toy that year was the Model Steam Fire Engine, with a vertical boiler, single oscillating cylinder, and a pump which spewed water quite a distance.This toy was very similar in appearance to the formidable horse-drawn prototypes which dashed through city streets on their way to a fire, spouting smoke, sparks and steam. The same year boys could also purchase a complete steam train, which ran on a circular track for about 20 minutes with each filling of water. It sold for $8 and came complete with a brass locomotive, two cars, and track.

The British firm of Bassett-Lowke also produced model steam locomotives. One gauge available was 1 1/2-inch, which was close to the present "0" gauge while others came in a  gauge twice as wide. The models ranged from stubby switchers to scale  versions of famous locomotives. In 1902 this firm also offered an elaborate model steam fire engine, as well as a tractor roller, several cranes, and two models of motor cars, all steam powered. 

The early 20th century brought little change in the design and appearance of steam-powered toys. One major innovation was the introduction of electricity as a heat source. As household electricity became more prevalent, the stationary steam engine gradually switched from alcohol burners to electric heating elements. A Weeder model in 1930 came with a 110-volt heating element. The company still made alcohol-burning versions and one hybrid was available with either a two-burner alcohol stove or an electric heater.

Today, some models, such as the 1909 Marklin steam-powered boat, sell at auction for thousands of dollars, putting many steam-powered toys out of reach of many collectors.

ted with these toys and would like to start a collection. What can you tell me about them?

A Pitcher Full of Beauty

QUESTION: I’m trying to learn more about a pitcher that I have. Through Internet research, I h/ave learned the story of Paul & Virginia, the decorative relief on the pitcher, but I’m trying to identify when and where my piece was made. The only marking on the bottom is a hand inscribed “BS.” Can you tell me anything about it?

ANSWER: You have what’s known as a Parian ware pitcher, most likely made after 1850 in the United States. While pottery factories produced thousands of Parian pieces, most of them were sculptures. However, here in the U.S., pitchers like this gained popular use as water pitchers.

English potters developed the formula for Parian ware porcelain in the 1840s, at the start of the Industrial Revolution. With the advent of steam power, it became possible to produce molds with which to make duplicate copies of ceramic products. Named after the Parian marble quarried in Greece that its originators intended to replicate using the same ingredients as porcelain—white china clay, feldspar, kaolin, and flint, Parian became popular with middle and upper middle class Victorian women who desired to own the marble statuary and china of the upper classes but couldn’t afford them. That’s where Parian came in. It filled this need at an affordable price.

Because Parian had a higher proportion of feldspar than porcelain, makers fired it at a lower temperature. The increased amount of feldspar caused the finished body to be more highly vitrified, thus possessing an ivory color and having a marble-like texture that’s smoother than that of biscuit, or unglazed, porcelain. Potters either made relief ornamentation by hand or in a mold. They left most Parian in its natural, creamy white state, but applied background colors, usually shades of blue, to contrast with the relief motifs.

Since the matte surface of Parian ware attracted dirt, which was difficult to remove, makers protected  much of the Parian made here and abroad with a smear glaze, which they achieved by adding chemicals to the kiln in much the same way that they would add salt to a kiln of stoneware. The matt or satin sheen of the smear glaze also preserved the Parian’s crisply molded details, which would have blurred under a glossy glaze finish. However, potters fully glazed the interiors of vases and pitchers intended to hold liquids.

In its Victorian heyday, potteries produced hundreds of thousands of pieces of Parian ware annually. Though it soon went out of popularity in England, American firms, notably one run by Christopher Fenton, which produced Parian from 1847 to 1849 as Fenton Works of Bennington, Vermont, and then from 1849 to 1858 as the United States Pottery Company, began making all sorts of items, but especially water pitchers. These potteries produced Parian ware using British manufacturing techniques brought over to America by English potters. Fenton’s companies made  at least 16 different pitchers.

Christopher Webber Fenton and his brother-in-law Julius Norton first made Parian in America at their pottery in Bennington, Vermont. Bennington had been a center for the production of utilitarian salt-glazed stoneware since the early part of the century. After Norton left the company in 1849, Fenton used the mark "Fenton's Works; Bennington, Vermont." When he acquired a new partner, a local businessman named Alanson Potter Lyman, also in 1849, Fenton changed the factory's name to the United States Pottery Company.

Daniel Greatbach, a Staffordshire potter who arrived in Bennington after beginning his American career in Jersey City, New Jersey, did much of the firm’s designing. Consistent with English counterparts of the mid-1840s through the 1850s, relief molding on Bennington pitchers usually consisted of the naturalistically rendered plant forms of the Rococo-revival style. Unfortunately, the factory closed in the Spring of 1858 due to the high cost of labor, the high losses by breakage, and the rough competition posed by cheaper imported articles. 

While the English potters marked their pieces, the Bennington firm for the most part did not, leaving nearly 80 percent unmarked which makes identifying Bennington pieces difficult without expert assistance. There’s a misconception that any unmarked Parian pieces from New England had to have been made by the United States Potter Company of Bennington. This myth seems to have originated in the 1920s with Dr. Charles Green, a New York physician and ceramics enthusiast, who amassed a large collection of Parian trinket boxes and vases during his antiquing forays throughout New England. Without knowledge of imported English ceramics into New England, he reasoned that anything found there must have been manufactured there. Since the Bennington pottery was known to have made some Parian, Green reasoned that all his unmarked Parian must have been made there as well. 

"Fenton's Works/Bennington,/Vermont," the mark used by Fenton’s Bennington firm,  clearly identifies the pitchers made prior to 1853, the year in which the pottery changed its name to the United States Pottery Company. The earlier of the two is a raised or applied mark impressed "UNITED STATES/ POTTERY CO./ BENNINGTON, VT.," which appears on four of their pitcher patterns–Cascade, Climbing Ivy, Tulip and Sunflower, and Paul and Virginia. A raised ribbon mark with the initials "U.S.P." was the last mark used on Parian by this firm. The ribbon also features two numbers denoting the pattern number and the capacity of the pitcher.

Victorians liked pitchers and vases of various sizes and shapes, including those shaped like hands holding receptacles for flowers or ears of corn or shells. Some had white relief decoration of grapes and vines, oak leaves, or climbing roses against a blue stippled background while others had relief illustrations from a novel called Paul & Virginia.

Jacques-Henri Bernardin de St. Pierre wrote the story of Paul and Virginia and first published it in 1788. The novel of naive love became an instant world-wide best seller, captivating audiences with the tale of two youngsters who grow up on a paradise island according to nature's law. In adolescence, the pair fall in love, but a shipwreck leads to their untimely deaths.

It’s a known fact that English immigrant potters brought with them a supply of English plaster casts and design molds to use in America. A pitcher can resemble an English one so closely as to suggest that it was cast in a mold made from the original piece. Therefore, it can be extremely hard for a beginning collector to tell the difference between unmarked English and American Parian ware.

Though Bennington Parian is considered the best Parian produced in America, other factories in Cincinnati, New York City, and Baltimore had begun production by the 1870s. So this pitcher could have been produced by one of those potteries.  Similar pitchers are selling for as much as $365 online.

Water, Water Everywhere

QUESTION: I discovered this unique water bottle at a local antiques co-op. While most antique water decanters are solid cut or pressed glass, this one comes apart into two pieces. A metal ring, with a rubber gasket to make the seal tight, screws onto the base. The mark on the bottom edge of the top section reads: Perfection Bottle Co., Wilkes-Barre, PA Pat March 30-97. What can you tell me about this type of water bottle?

ANSWER: You, indeed, have found a unique water bottle. Though a revolutionary idea, this type of water bottle appeared in stores for only a few years.

From the mid-19th century to the early 20th century, water bottles were standard items in many American Victorian households. They appeared on dinner tables either alone or with matching glasses and in bedrooms often with a glass that set upside down over the top of the bottle. They also could be found on the nightstands in hotel rooms and steamship cabins, and on tables in railroad lounge cars.

At first, manufacturers made them of elegant cut glass, but that was too expensive for the average person. Some turned to using pressed glass in a variety of patterns which lowered their cost.

However, cleaning these crystal beauties posed a serious problem with hygiene. The bottle’s narrow neck made it hard to get a brush down into it, making it almost impossible to clean the inside surface of the bottle’s bulbous interior. But that changed in 1896 when William B. Fenn came up with the idea of a separating water bottle—one with pieces that could unscrew for easy cleaning. On March 30 of the following year, he applied for and received a patent for it.

Fenn’s separating water bottle had an ingenious design. He made the neck and base two separate pieces, with the bottom edge of the neck fitting inside the top rim of the base. A rubber gasket formed a waterproof seal between the two parts and a metal ring screwed over the joint to lock the pieces in place.

Even though Fenn used glass for his original design, he stipulated in his patent that any material, including ceramics and porcelain, could be used for the bottle, itself, and any metal could be used for the joining ring as long it wouldn’t corrode.

It took nearly three years for Fenn's" bottle to be available to the public.,Priced at $4.50 each when they first came on the market in 1900, they were well beyond the means of the average person. Realizing he had to do something to increase sales, Fenn redesigned the pattern on the bottle so that it could be pressed instead of cut. Suddenly, the price per bottle dropped to 50 cents per bottle, or 34 cents each for a dozen, making the Fenn water bottle affordable for everyone.

Fenn’s invention was so successful that he decided to expand production. By October,1902, consumers could purchase a decanter and stopper in four sizes—half pint, and one, two and three-pint versions. And during 1903; He expanded the line further to include other glass containers, such as   syrup pitchers and cruets, as well as bitters, cologne, and barber bottles, each with a different pattern.

The separating water bottle came in three models—the Royal, with a delicate design imitating cut crystal, the Imperial, also sold in two and three-pint capacities but without a pattern, the Optic, with a succession of single, convex protruding, vertical panels with rounded tops and bottoms, and the Colonial, featuring nine rounded panels with flat bottoms around the base. Each came in two and three-pint sizes, except the Colonial which also came in a half-gallon size.

In 1903, the Perfection Water Bottle Co. and the Sterling Glass Co. combined to create the Perfection Glass.Co. of Washington, Pennsylvania, with William Fenn as one of the initial investors. But the new company was only to last until 1907 when it closed its doors for lack of sales.