Fall is Cranberry Season

QUESTION: Every year at Thanksgiving, I bring out a set of eight sparkling pink glasses that used to be belong to my great-grandmother. They seem so festive and add a holiday note to our dining table. Can you tell me anything about these glasses?

ANSWER: Your glasses are made of cranberry glass, a very special type of glass favored by Victorian hostesses, especially around the holidays. Not only is this glass appropriate for the Thanksgiving and Christmas holidays, but it’s also a popular collectible. In fact, some pieces are worth too much to be used for fear of breakage.

Although glassblowers had been making colored glass since ancient Egypt, it was Johann Kunckel, a 17th-century German chemist from Potsdam, who came up with the red color by adding gold chloride to the clear crystal. During the 19th century, English and American glassblowers experimented with adding less gold choride, resulting in a pink glass which the Americans called “cranberry.”

And thanks to the virtuosity of these glassblowers there seems to be an endless variety of shapes and patterns of this glass on the market. In addition to tumblers and water pitchers, there are salt cellars, sugar shakers, cruets, jars, jugs, decanters, celery vases and finger bowls. Among the widely used patterns are "Swirl," "Coin Dot," and "Daisy & Fern." Some of the most rare and expensive items found from this time period are beautiful lamps and other lighting fixtures.
         
As with any collectible, cranberry glass can also be an investment. Pieces that sold for less than ten dollars a generation ago are now worth hundreds of dollars. Because of the natural fragility of glass, antique cranberry glass has become relatively scarce, though it does turn up in thrift and antique shops,  flea markets, and auctions.         

Although cranberry glass had peaked in popularity by the end of the 19th century, manufacturers produced it in quantity through the 1930s. The last two companies to make this unique glass—The Pilgrim Glass Corporation and Fenton Art Glass —went out of business early this century. Pilgrim Glass Company produced beautiful blown cranberry glass ranging from various vases and baskets to candle holders and sold them in department stores and gift shops around the country until 2001. At the time if the company's closing, cranberry was its most popular type of glass. Fenton Art Glass marketed new cranberry glass, featuring opalescent decoration with coin dots, daisy patterns and numerous other styles, through retailers around the country until it closed in 2011.

Cranberry glass has always been made in craft production rather than in large quantities, due to the high cost of the gold and the delicate mixing process required. Glassmakers dissolve the gold chloride in a solution of nitric acid and hydrochloric acid, known as “aqua regia.” Gold in the batch reacts with intense heat to create the beautiful cranberry color. A glassworker called a “caser” attaches a “bud” of this glass mixture to a blowpipe. Then the glassblower stands on a platform with the mold below his feet and blows the molten glass into the mold to create the desired shape. Afterwards, another glassworker places the piece in a “lehr” or annealing oven where it slowly cools to room temperature. Most cranberry pieces are hand blown or molded and often contain small bubbles and striations.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Locating Parts for Antique Furniture

QUESTION: I have a Chippendale mahogany bookcase/secretary that is missing a finial. Do you have any idea where I can locate one?

ANSWER: Finding parts for pieces of antique furniture can be a quest in itself. But before you decide to restore a piece, you first have to know how old it is. A piece of furniture dating before 1830 is considered a fine antique. As such, it has special rules for restoration. First, you cannot replace more than 60 percent of it without it being declassified as an antique. Replacing anything on it will definitely lower the value. In fact, doing any sort of restoration usually hurts the value, unless it’s to restore the integrity of the piece.

Restoring furniture made after 1830 is another matter. A piece must be at least 60 percent original to have any value. If more has been done to it, then it's just another piece of used furniture.

As time goes on, even pieces dating from the mid-19th century will be scrutinized closer when it comes to restoration. However, generally the fine antique crowd tends to avoid anything Victorian, looking upon it as used furniture. Replacing parts and restoring a piece of Victorian furniture can actually enhance its value. But the replacement has to be of the finest quality and the restoration done right.

The date when this bookcase/secretary was made wasn’t specified. If it were an authentic 18th-century Chippendale piece, replacing that finial would have to be done by a professional cabinetmaker and restorer. This could cost several thousand dollars, but when the piece may be worth half a million in the first place, that’s a drop in the antique bucket. The cabinetmaker or joiner would have to hand-carve the missing finial to create an exact match to the original.

If—and that’s a BIG if—a replacement could be found from an identical bookcase/secretary, that would also work. But since 18th-century cabinetmakers all customized details like finials on their pieces, the chance of finding one is a million to one. The only way to make sure is to find a bookcase/secretary from the same cabinetmaker that’s beyond restoration and use it for parts.

On the other hand, if the piece were from a later period, which is probably is, it may be possible to find a finial floating around in a antique or junk shop. But you can’t just go to a home center and pick one off the shelf.

The first place to start looking is in antique shops that specialize in selling furniture. This could take years of browsing. But parts have been known to service in the least possible places.

You can also turn to a cabinetmaker who specializes in making replacement parts for furniture. This, again, could cost a bit since each part has to be handcrafted and that takes time.

Finally, there area a number of places on the Internet to find replacement parts. A lot of them sell mostly replacement hardware, but some, like antique furniture repair and refinishing companies, do make parts to order. McLean’s Refinishing, of Watkinsville, Georgia, stocks old furniture parts and has access to reproduction and replacement parts.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Preservation vs. Conservation

QUESTION: I have several pieces of antique furniture that need some tender loving care, but I’m not sure how to go about it. Can you explain the difference between preservation and conservation? And can you give me some tips on how I can take care of my pieces?


ANSWER: Preservation involves keeping an object from destruction and seeing to it that it’s not irreversibly altered or changed. In conservation, on the other had, the goal is to preserve the maximum amount of the original material, in as unaltered a condition as possible.

Furniture conservation and restoration can be divided into two general areas—structure and finish. Structure generally relates to wood---solid, joined, and veneered. The finish of furniture can be painted or varnished.



Antiques restoration can be an arduous process if the goal is complete authenticity. This is particularly true for museum conservators. For them, authentic material is the actual original material of the object. For example, a chair with its original upholstery, even if it is faded and shredded, is authentic for the conservator and possesses historic value even though it may not be exhibitable. The same chair can be "restored" and looking as it did when new, with replacement fabric copied from the original weave and colors, and upholstered according to the known design of that particular piece of furniture.

Some pieces of furniture, especially those constructed of harder woods, such as walnut, mahogany, maple, oak, or cherry, may only need to have their surface finish preserved. In the case of furniture made of these woods, there may be enough of the original finish left to restore the piece rather than refinish it.

Before doing anything, study your piece. Is the finish pretty much intact? Does the piece have a nice patina? Is the piece more than 100 years old? If you answered yes to even one of these questions, then you should do your best to preserve the original finish of your piece.

The first step in preservation is cleaning. Furniture gets dirty, even grimy over time. Before you can apply a new finish, you need to get rid of all the accumulated dirt and grease that often make it difficult to tell what kind of wood the piece of furniture is made of. Grime can also hide the fine lines of inlay and marquetry. Believe it or not, using lemon oil, a popular furniture polish, can do more harm than good. Since its made of a light petroleum oil and some paraffin wax, the wood doesn’t absorb it. Instead, it acts as a surface dust catcher.

One of the best products for cleaning wood, especially furniture, is Murphy’s Oil Soap. Today, it’s also in a spray bottle, but in case you can’t find it that way, you can make your own cleaning solution by mixing a capful of Murphy’s in a spray bottle of water. For this, you can use any empty spray cleaner bottle, as long as you wash it out thoroughly first. Since water will loosen any glued joint, and also tends to raise the grain of the wood, you don’t’ want to use very much. An old washcloth will do quite well for cleaning.

Spray the Murphy’s on a damp washcloth and then rub it on the surface of the furniture. Rinse the cloth when it gets to dirty. Have a second wet, but wrung out, washcloth ready to wipe off the Murphy’s Oil solution, wringing the cloth nearly dry after every few wipes. You can also use a green scruby cloth, sold in Dollar Stores, if there’s hard to remove grime. A stiff-bristle brush will allow you to get the dirt out of carved and turned areas. The secret is to clean only a small area at a time–one leg of a chair, one part of a chest, and so on. After you clean an area, wipe it dry with an old face towel. Be sure to wash out all your cloths or use others as you progress, especially on a large piece of furniture. After you have finished cleaning your piece of furniture, give it a final wipe with a clean cotton rag and set it aside to dry for 24 hours.

All this cleaning may cause joints to loosen, so be sure to check the structural integrity of your piece before applying a new finish. If joints need to be tightened or reglued, do so before applying a new finish.

Now you’re ready to apply a new finish. You can either use plain tung oil or a product like Minwax® Water-Based WoodSheen® which is a water-soluble mixture of furniture finish and stain that comes in six colors. For a piece that’s got lots of scratches or marks, it’s best to choose a stain color that complements the wood’s original finish.

The final step is polishing the entire piece using a prepared wax like Minwax, which comes in light and dark varieties. Obviously, use the light for woods like oak or cherry and the dark for woods like walnut or mahogany. Apply the wax with a piece of soft cotton cloth like an old athletic sock and after 30 minutes, polish the surface with an old face towel. One coat should do it, but for tabletops, apply two coats of wax.

Rub off the first coat with 0000 steel wool, then apply the second and polish with the towel. The more coats of wax you apply, the more water resistant the top will become. A light polishing once or twice a year will keep your piece in great condition.

There are no short cuts or time savers to this entire process. The work can be slow and at times tedious, but the results are worth it.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Little Portraits

QUESTION: I’ve noticed photographic portrait cards of Civil War soldiers  and other people, some of them famous, at flea markets and antique shows. Are these good to collect or do people buy them just to add ambiance to their antique decorating?

ANSWER: The portrait cards you’ve been seeing at flea markets and antique shows, known as  carte de visites, are, indeed, highly collectible, especially if they’re photographs of someone special or famous.

Parisian photographer, André Adolphe Eugène Disderi, patented the first carte de visites, literally meaning “visiting cards,” in 1854. Each card, onto which the photographer pasted a small albumen print,  measured 2-1/2 x 4 inches. They became all the rage for several decades during and after the Civil War, both here and abroad. However,  Disderi's format didn’t become widely used until nearly five years after he patented it.

But once his format caught on, it became an international standard. For the first time, people could exchange portraits, which they could then place into matching slots in specially made carte de visite photo albums. It didn’t matter where the recipient lived since they could purchase these albums everywhere. Another advantage to carte de visites was that people could mail them to each other. Usually each print came with a special mailing envelope, making it easy for the sender to just address it and pop it into the mail. Earlier daguerreotype and ambrotype photographs, both done on glass plates, required the sender to package them in bulky boxes with sufficient packing to prevent breakage during shipment. And because of their small size, carte de visites were also somewhat inexpensive.

Before the advent of carte de visites, people exchanged elaborate calling cards with their names engraved in decorative fonts. During the decade before the Civil War, it was the custom for a person to present his or her calling card whenever they visited someone. Life was very formal at the time, and no one received anyone they didn’t know without a calling card. Most people had a small basket or box in their parlor in which visitors could place their cards. A few photographers created and sold special photographic calling cards, but these weren’t standardized.

Using Disderi's method, a photographer could take eight negatives on a single 8 x 10-inch glass plate using a sliding plate holder and a camera with four lenses. That allowed him to make eight copies of the person’s portrait each time he printed the negative. This reduced production costs and allowed photographers to sell carte de visites at a reasonable price.

People were slow to purchase these new photo cards. However, legend says that after Disdéri published Emperor Napoleon III's photos in this format, the cartes gained widespread popularity.

Historians believe C. D. Fredericks introduced the carte de visite to the U.S. in New York late in the summer of 1859.  After carte de visites of Abraham Lincoln went on sale, they caught on like wildfire as soldiers and their families posed for them before war or death separated them. Carte de visites of famous people, like Ulysses S. Grant, became an instant hit, as people began collecting celebrity portraits of the time.

Civil War photographs are extremely collectible and have crossover appeal to collectors of both military and early photographs. From 1861 to 1865, the most method of portraiture was the tin-type and the carte de visite.

John L. Gihon of Chestnut St. in Philadelphia, was a portrait photographer who captured images of soldiers and prisoners at Fort Delaware off the shore of Delaware City, Delaware. His carte de visites eventually led to the production of early baseball cards for the Philadelphia Athletics in the 1870s. He died of an illness at only 39. Gihon charged his customers $2.50 for a sitting and six cards.

These little portraits were very important to Civil War soldiers. Since those, especially the Confederate prisoners, at Fort Delaware had to make do with what they had, they, usually officers, often borrowed pieces of uniforms, especially hats, and props, including swords, belts, sashes, from others confined with them so that they would appear as finely dressed as possible.

Prices of collectible carte de visites vary on condition, pose and subject. A carte de visite of surgeon Robert Hubbard, 17th Connecticut Infantry Volunteers, sold at auction for $374. Hubbard enlisted as surgeon of the regiment in August 1862 and became the acting medical director during the Battle of Gettysburg. He resigned in Dec. 1863.

A carte-de-visite of Dr. Mary Walker, taken by noted London photographer Elliott & Fry sold at auction for $1,380. She graduated from Syracuse Medical College in 1855 and was an author and early feminist who gained distinction during the Civil War as a humanitarian, surgeon, and spy. Congress awarded her  the Congressional Medal of Honor in January 1866 on the personal recommendation of General Sherman. She refused to part with it when Congress revoked it for “unusual circumstance” in 1917. Dr. Walker died in 1919, but it wasn’t until 1977 when President Carter officially reinstated the award.

Collectors can find a variety of carte de visites both at flea markets and antique shows and in some antique shops and online. Prices vary from a few dollars to several thousand. They’re great items to collect, especially if a collector can find the special albums to hold them, often sold with their carte de visites removed.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

A Taste of Elegance

QUESTION: From what period does this chair originate? The legs look quite modern. Is it a modern interpretation of an antique design?

ANSWER: This chair is a fine example of French Art Deco. As one of six of a set of dining chairs, it would have been placed under an equally simple, but elegant dining table.

Art Deco emerged in Paris just before World War I as a luxurious design style. But it wasn’t until after the war in the 1920s that Modernism appeared throughout Europe. Until the art world coined the name Art Deco later on in the 1960s, designers referred to the style as Arte Moderne which is French for Modern Art.

Art Nouveau furniture became a commercial failure. The intricate inlays and carvings made it too expensive for all except the very rich.  Concerned by competitive advances in design and manufacturing made in Germany and Austria in the early 20th century, French designers realized they could rejuvenate a their French furniture industry by producing luxurious pieces that a greater number of people could afford.

The founding in 1900 of the Société des Artistes Décorateurs (the Society of Artist-Decorators), a professional designers' association, marked the appearance of new standards for French design and production. Each year the association held exhibitions in which their members exhibited their work. In 1912, the French Government decided to sponsor an international exhibition of decorative arts to promote French design. However, they had to postpone the exhibition, originally scheduled for 1915, until after World War I.

Set at the Trocadero in Paris, near the Eiffel Tower, La Exposition Internationale des Arts Décoratifs et Industriels Modernes (International Exhibition of Modern and Industrial Decorative Arts), held finally in 1925, was a massive trade fair that dazzled more than 16 million visitors during its seven-month run. On exhibit was everything from architecture and interior design to jewelry and perfumes, all intended to promote French luxury items. With such a long name, visitors began referring to the exhibition, and subsequently the design movement, as Art Deco. On display were a wide range of decorative arts, created between the two world wars.



The French Government invited over 20 countries to participate. All works on display had to be modern, no copying of historical styles of the past would be permitted. The stylistic unity of exhibits at the fair indicated that Art Deco had already become an international style by 1925.The great commercial success of Art  ensured that designers and manufacturers throughout Europe would continue to produce furniture in this style until well into the 1930s.

In France, Art Deco combined the traditional quality and luxury of French furniture with the good taste of Classicism and the exoticism of far-off lands. Many designers used sumptuous, expensive materials like exotic hardwoods, ivory, and lacquer combined with geometric forms and luxurious fabrics to provide plush comfort. Motifs like Chinese fretwork, African textile patterns, and Central American ziggurats provided designers with the exotic designs to play with to create a fresh, modern look. They depicted natural motifs as graceful and highly stylized. The use of animal skins, horn, and ivory accents from French colonies in Africa gave pieces exotic appeal.



French Art Deco furniture featured elegant lines and often had ornamentation applied to its surface. It could be utilitarian or purely ornamental, conceived only for its decorative value. It was the look that was important to many French designers, not the use or comfort of the piece. Even today, some pieces look as if their designers intended them to remain on display in a store window and not be used at all. At times it seemed as though the designers and their patrons were trying to escape the dismal reality of daily life at that time.

In 1937, the French government sponsored another trade fair, La Exposition Internationale des Arts et Techniques dans la Vie Moderne (The International Exhibition of Arts and Techniques in Modern Life). Less ambitious than the 1925 exhibition, this fair focused more on France's place in the modern world rather than on its production of luxury goods, thus marking the end of the French Art Deco Era.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about western antiques in the special 2019 Summer Edition, "That's Entertainment," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Tobacco Behind Closed Doors

QUESTION: I found what looks like a small, shallow, porcelain vase at a fleamarket near my home. It’s almost too short to hold anything but flowers with very short stems and has a delicate floral design on the outside. Do you have any idea what this might be?

ANSWER: What you have is a ladies spit cup or spittoon. Chewing is one of the oldest ways of consuming tobacco. Native Americans chewed its leaves, often mixing it with lime. It became a popular pastime in the last decade of the 18th century and continued to be so until 1920. Today, the most visible evidence of tobacco chewing appears in baseball, but even that’s dying out as users succumb to throat cancer.

Though mostly men indulged in the habit of chewing tobacco, women, especially those in Victorian times, used it as well. In 1865, a traveler down South noted that seven-tenths of all people, both male and female,  over the age of 12 used tobacco in some form. Even children of 8 or 9 smoked. The habit increased in popularity after the Civil War as soldiers, who chewed tobacco to ease frazzled nerves on the battlefield, continued to do so after they came home.

Victorian women could chew and spit as well as men. These ladies usually abused tobacco and alcohol behind closed doors. And while they snuck outside and drank and smoked in the outhouse to avoid being caught by their husbands, they often chewed tobacco quietly around the house while doing their chores and needed something in which to deposit their spit.

After the Civil War, spittoons became a fixture in many places, including hotels, saloons, stores, and any other place where men chewing tobacco might congregate. These were large vessels made of brass or pottery with a broad rim into which the chewer tried to aim his spit, often with little success.

Woman, on the other hand, used a dainty spit cup—also called a lady’s cuspidor, toilette cup, or boudoir dish—to gracefully discard their sputum. Some looked like regular coffee or tea cups while others had fanciful shapes with fluted rims. Since ladies didn’t need to spit across the room, these cups often had decorative gold rims and base, and delicate, lady-like designs. Some came in the shape of little baskets or drawstring purses. English and French manufacturers, especially Limoges, made these lovely spit receptacles out of fine porcelain, and for plainer, everyday use, ironstone with flowered transferware patterns on both the inside and outside.

As chewing tobacco's popularity declined throughout the years, the spittoon became a relic. However, women found other uses for these cups. Pregnant women, who tended to salivate more, especially when they had nausea or heartburn, also used these cups. Even today, it’s common for Haitian women to carry around a spit cup while pregnant.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about western antiques in the special 2019 Summer Edition, "That's Entertainment," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

The Ultimate All-in-One

QUESTION: My grandmother had a cabinet in her kitchen which she called a “Hoosier.” She told me her mother left it to her and now I have it in my kitchen. What can you tell me about it?

ANSWER: The modern kitchen with its microwave, glass-topped stove, side-by-side refrigerator, and granite countertops is a far cry from your great-grandma’s kitchen. The most modern thing in her kitchen was her Hoosier, an all-in-one preparation and storage unit that brought her convenience and practicality.

Named after the Hoosier Manufacturing Co. of New Castle, Indiana, the Hoosier cabinet was to become one of the most popular pieces of furniture to hit the American market. Though there were other companies in Indiana that made them, Hoosier Manufacturing built over four million of these special cabinets between 1900 and 1940. Until 1920, the company made and finished their new all-in-one cabinet in natural oak, but as the third decade of the 20th century progressed, they began to offer Hooisers with white enamel-lined drawers. Because of the bright white of the enamel, people called them “White Beauties.”

When the Hoosier first appeared, American homes didn’t have built-in storage cabinets. Soon housewives demanded something in which they could store their baking supplies and equipment, as well as give them an additional work surface. The company quickly adapted the 19th-century baker’s cabinet, a piece of furniture they were already making, to fit the needs of the modern housewife. These existing cabinets featured a work surface to roll out and knead dough, a few cabinets above, and  “possum belly” drawers below to hold flour and sugar. Manufacturers of these baker’s cabinets made the drawers from tin to protect their contents from rodents. At first, they made the work surface of wood, then later employed zinc, aluminum, and porcelain enamel. They attached casters to the legs, both for ease of moving and to keep ants out of the cabinet.

By rearranging the parts of the baker’s cabinet, Hoosier Manufacturing came up with a well-organized, compact unit which answered the housewife’s needs for storage and working space. The company added to these cabinets many improvements, including flour sifters, bread drawers lined with enamel, cutting boards, and an assortment of storage containers, to help the homemaker.

The typical Hoosier cabinet had three sections—a bottom section, featuring one large compartment with a slide-out shelf and several drawers to one side, a top portion only half as deep with several smaller compartments with doors, with or without windows, and a large lower compartment with a roll-top door that could be closed to hide various tools and equipment. Hoosier joined the top and bottom of the cabinet using a pair of metal channels which served as the guide for a sliding work surface, which usually had a pair of shallow drawers attached to its underside. The cabinet, with its work surface retracted, was normally about two feet deep— double that when pulled out—while the cabinet stood nearly six feet high.

A distinctive feature of the Hoosier cabinet was its accessories. Most came equipped with a variety of racks and other hardware to hold and organize spices and various staples. Some came with a hand coffee grinder and a combination flour-bin/sifter, a tin hopper that a housewife could use without having to remove it from the cabinet. Some contained a similar bin for sugar.

To hold a variety of spices and other staples, Hoosiers came equipped with special glass jars, manufactured by the Sneath Glass Company, to fit the cabinet and its racks. Original sets of Hoosier glassware consisted of coffee and tea canisters, a salt box, and four to eight spice jars. Some manufacturers also included a cracker or cookie jar. Some Hoosiers had elastic straps attached on the inside of their doors behind which housewives could place cards with such information as measurement conversions, sample menus, and household tips.

Manufacturers marked their cabinets with an identifying label which was often engraved or stamped onto metal, then screwed onto the front of the cabinet. Some glued paper labels on the back of the cabinet. Both types often disappeared as a result of refinishing.

Though Hoosier cabinets remained popular into the 1930s, they began to fall into disuse as soon as home builders equipped new kitchens with built-in cabinets and other appliances. Today, Hoosiers, dating from 1900-1910, sell on eBay for $500-$2,300. Later models sell for as little as $200.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about western antiques in the special 2019 Spring Edition, "Down to the Sea in Ships," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

The Great Padlock Mystery

QUESTION: I’ve found a Victorian padlock that I’d like to buy. Does it go back to the mid- 1800's during Queen Victoria's reign? It’s quite large, measuring 6 inches high x 4 inches wide x 1.5 inches deep. Was that a common size? The seller told me it’s called an "Iron Smoke House Lock," What does that mean?


ANSWER: The lock you’re thinking of purchasing isn’t all that rare. During the Industrial Revolution in England, Midland lock makers produced them by the thousands.

As England moved slowly from an agrarian culture to an industrial one towards the end of the 18th century, locksmiths began designing locks that cost less and had more strength. But burglars kept one step ahead of them. Up to that time, only wealthy merchants could afford strong locks.

The average person had to make do with poorly made penny padlocks to protect his coal storage bin from thieves, and homeowners wanted locks for their doors and windows. With an increase in thievery, people demanded locks for everything from Bibles to carriages to schools and warehouses.

The answer to everyone’s needs was the padlock, a portable, if not somewhat cumbersome, device to protect against forced entry.

Robert Barron invented the double–acting tumbler lock in 1778. The tumbler or lever falls into a slot in the bolt which will yield only if the tumbler is lifted out of the slot to exactly the right height. Barron’s lock had two such levers, each of which had to be lifted to a different height before the bolt could be withdrawn.

Jeremiah Chubb improved on Barron's lock n 1818 . He incorporated a spring into the lock which would catch and hold any lever that had been raised too high by a lock picker. Not only did design add an extra level of security, it showed when someone had tampered with the lock.

Early padlocks offered  convenience since people could carry them and use them where necessary. Historians believe the Romans were the first to use padlocks.  Roman padlocks had a long bent rod attached to the case and a shorter piece which could be inserted into the case. There’s also evidence that merchants traveling the ancient trade routes to Asia and China used them to protect their goods.

Padlocks have been used in China since the late Eastern Han Dynasty, dating from 25–220 AD. Early Chinese padlocks were mainly "key-operated locks with splitting springs and partially keyless letter combination locks. Chinese craftsmen made them from bronze, brass, silver, and other materials.

Padlocks became known as “smokehouse locks” because people commonly used them to lock their meat in their smokehouses to prevent poachers from stealing it. Designed in England and formed from wrought iron sheet and employed simple lever and ward mechanisms, these locks afforded little protection against forced entry. Contemporary with the smokehouse padlocks and originating in the Slavic areas of Europe were "screw key" padlocks. These opened with a helical key threaded into the keyhole. The key pulled the locking bolt open against a strong spring. Improved manufacturing methods allowed the manufacture of better padlocks that put an end to the Smokehouse around 1910.

Around the 1850s, "Scandinavian" style locks, or "Polhem locks", invented by the Swedish inventor Christopher Polhem, became a more secure alternative to the prevailing smokehouse and screw locks. These locks had a cast iron body that was loaded with a stack of rotating disks. Each disk had a central cutout to allow the key to pass through them and two notches cut out on the edge of the disc. When locked, the discs passed through cut-outs on the shackle. The key rotated each disk until the notches, placed along the edge of each tumbler in different places, lined up with the shackle, allowing the shackle to slide out of the body. The McWilliams company received a patent for these locks in 1871. The "Scandinavian" design was so successful that JHW Climax & Co. of Newark, New Jersey continued to make these padlocks until the 1950s.

Contemporary with the Scandinavian padlock, were the "cast heart" locks, so called because of their shape. A significantly stronger lock than the smokehouse and much more resistant to corrosion than the Scandinavian, these locks had a lock body sand cast from brass or bronze and a more secure lever mechanism. Heart locks had two prominent characteristics: one was a spring-loaded cover that pivoted over the keyhole to keep dirt and insects out of the lock that was called a "drop". The other was a point formed at the bottom of the lock so a chain could be attached to the lock body to prevent the lock from getting lost or stolen. Cast heart locks were very popular with railroads for locking switches and cars because of their economical cost and excellent ability to open reliably in dirty, moist, and frozen environments.

Around the 1870s, lock makers realized they could successfully package the same locking mechanism found in cast heart locks into a more economical steel or brass shell instead of having to cast a thick metal body. These lock shells were stamped out of flat metal stock, filled with lever tumblers, and then riveted together. Although more fragile than the cast hearts, these locks were attractive because they cost less. In 1908, Adams & Westlake patented a stamped & riveted switch lock that was so economical that many railroads stopped using the popular cast hearts and went with this new stamped shell lock body design. Many lock manufacturers made this very popular style of lock.

Each lock consisted of a body, shackle, and a locking mechanism. The typical shackle is a “U” shaped loop of metal that encircles whatever is being secured by the padlock. Most padlock shackles either swung away or slid out of the padlock body when in the unlocked position. Improved manufacturing methods allowed the manufacture of better padlocks that put an end to the Smokehouse around 1910.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about western antiques in the special 2019 Spring Edition, "Down to the Sea in Ships," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Calling Mr. Watson

QUESTION: I have one of those large black rotary telephones. Are those collectible now that we have such advanced technology?

ANSWER: You might want to consider holding on to your black phone for a while as they and many 20th-century models are coming into their own as collectibles.

“Mr. Watson, I need you.” When Alexander Graham Bell, the Scottish-born American inventor, scientist, and teacher of the deaf who’s most noted for his invention of the telephone in 1876,  spoke those now famous words to his colleague during the first telephone call on March 10, 1876, he had no idea where that would lead us. Today, many people have smart phones that do just about everything except make a cup of fresh coffee, although I suspect they’ll soon offer an “app” for that, although national brand coffee shops now have apps to order and pay for coffee right from a smartphone.

But what about all the phones that came before the smart ones. The long-time standard Western Electric 302 black rotary phone, introduced in 1937, is probably the most well known. Some people have game rooms in their homes in which they install a working pay phone. These workhorses, once owned by AT&T, were meant to last a long time.

When people think of old telephones, however, they usually imagine the Western Electric 102 candlestick-type phone, which went into use in 1927. Today, you can purchase an original for a modest $469 at the TelephonyMusuem online.

In the 1930s, Western Electric produced 202 model with an oval base, and later a sleeker handset, now selling for $289. Both the 102 and 202 models required a ringer, which customers had to buy separately. The large rotary 302 phone was the first to house the ringer in the phone. It was made from metal until World War II and sells for $199, then from plastic, selling for $169, until the late 1950s. Western Electric stamped the date of production on the base of its phones, so it’s easy to tell the age of the unit.

One of the big problems in collecting old phones is that many of the more unique ones have been reproduced, in working order, of course. While the originals sell for as much as $500, the reproductions sell for half that. Vintage phones from the 1920s can sell for as much as $2,000. So it’s important to watch for reproductions being sold as originals, especially on auction sites like eBay.

And don’t forget the sleek and colorful Princess phone, introduced in 1959, and the Trimline phone with dial in the handset, dating from 1965. Both replaced the stodgy desk phones of the past. Rotary dials continued to be offered even after touch-tone came out because phone companies charged an extra fee for touch-tone service and many customers didn't want to pay for it. The hotter the color of a Princess phone, the higher its price. The more common colors—pink, red, peach, and black—in touch or rotary sell for about $200 each while green, beige, white, aqua and yellow command prices of $150 and up.. The most common Princess phone in ivory sells for no more than $119. Most of the Princess phones require a $30 transformer to light the dial.

Collecting old phones isn’t difficult, but like clocks, you can have just so many in your house.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about western antiques in the special 2019 Spring Edition, "Down to the Sea in Ships," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Do Old Stock Certificates Have Any Investment Value?

QUESTION: I’ve been unpacking some old boxes of things left to me by my father. In one of them I discovered some old stock certificates. Are they worthless or do they have investment value?

ANSWER: Old stock certificates, especially those from defunct companies, are only worth the paper that they’re printed on. But some, especially those with signatures from famous people, famous companies, or those involved in major scandals, can be worth quite a bit.

What exactly is a stock certificate? A stock certificate is the physical piece of paper representing ownership in a company and includes the number of shares owned, the date, an identification number, usually a corporate seal, and signatures. They’re larger than a standard letter-size piece of paper and many also have elaborate engraved designs to discourage counterfeiting.

Stocks represent partial ownership in a company. Today, most companies keep records of ownership electronically but some allow their shareholders to request a paper version. Each certificate starts out as a standard design to which the company adds the date of issue, identification number, and other information, including the printed signature of the chief executive. Executives on older certificates signed them in ink.



According to financial historians, partnership agreements dividing ownership into shares began to be used in northern Italy during the Middle Ages. However, these early shares were only intended to be in effect for a short time and only included a small group of people. Eventually the idea of shareholding spread to Belgium, and it’s believed the concept caught on in the trading town of Bruges. It was here that the idea of the stock exchange originated.

Eventually, shareholding took its next big step in Amsterdam in the early 17th century when the Dutch East India Company, formed to encourage trade in spices from Indonesia, issued shares that were tradable. The company compensated its shareholders well for their investments. In 1621, the market saw the issuance of shares for the Dutch West India Company, and much financial innovation ensued. Stock exchanges in the New World didn’t appear until 1790 in Philadelphia and then two years later in New York.

Collectors love canceled stock certificates because of their beautiful and elaborate graphics, as well as their connection to the historically significant companies they represent.

Old certificate values vary depending on their rarity, beauty, collector interest, historical importance, and  autographs, and industries for which they’re issued. Like all collectibles, supply and demand determine value.  Interesting pieces create a lot of demand while supplies vary.

What affects the market for stock certificates? Above all, general economic conditions tend to influence the prices of old stock certificates because many collectors of them are also involved in the real stock market. The law of supply and demand, as with other collectibles, governs this market as well. And Internet auctions have increased not only the availability of old stock certificates but their ease of purchase.

What determines the pricing of old stock certificates? Two important price boosters are signatures of important people and newly formed companies. For example, a Standard Oil Company certificate that John D. Rockefeller signed is worth nearly $8,000 today. Prices have leveled off in the last few years and finding rare certificates at reasonable prices has become a real challenge.



As with postage stamps, pricing can be affected by the rarity of a certificate—the rarer it is, the higher the price. An autograph of someone famous of the stock company with which he was involved also raises the price. Whether a stock certificate has ever been issued also influences it value, as does its age and decoration. The location and history of the company don’t affect the price of a certificate as much as, say, its condition and whether its cancelled or not.

However, no one point is always in control of a certificate’s value. For example, a Cody-Dyer Arizona Mining & Milling stock certificate, from a failed gold mine, signed by Buffalo Bill Cody currently is currently valued at approximately$4,000, while a rare unsigned Buffalo Bill's Wild West Co. stock certificate sold for $20,000 at auction in 2008.

As with any collectible, you should always collect stock certificates that are in excellent condition, have been issued, and are uncancelled. You should also collect certificates from industries that you’re familiar with or in which you’re interested. Early companies issued their stocks in small quantities, thus limiting the number of their certificates in today’s market. But there are lots out there for sale at low to reasonable prices.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about western antiques in the special 2019 Spring Edition, "Down to the Sea in Ships," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.