Showing posts with label chairs. Show all posts
Showing posts with label chairs. Show all posts

Monday, February 27, 2023

The Classic Windsor Chair

 

QUESTION: We’ve had a Windsor chair in our family as far back as I can remember. I believe it belonged to my great-great grandmother. Today, I use it as a chair at my computer desk. What can you tell me about this chair?

ANSWER: You have a standard bow-back Windsor chair, the kind found in just about every upper class household in Colonial America. While most people consider them delicate antiques, they’re quite sturdy and have many uses. 

One of the most graceful and usable of all traditional chairs, the Windsor is also the most successful piece of furniture in American history. Its origins, however, are English, dating back to the turned and joined stools of 16th-Century England. The name probably derives from Windsor, where a prolific chairmaker  produced and sold the chairs in the 18th Century. He sent them down the Thames River to London where people referred to them as coming "up from Windsor."

Wheelwrights rather than cabinetmakers made Windsor chairs in England. They remained farmhouse or tavern furniture for a long time. But here in America, homeowners embraced the Windsor as a sort of all-around chair. They could be stored in a hallway and brought into any room that needed more seating when guests arrived. They could be easily carried. And they could be brought outdoors to provide seating on the lawn on hot summer days. Even the most prominent members of Colonial communities used them. George Washington seated his guests on the East portico of Mount Vernon in 30 Windsor chairs.

As a piece of furniture, the Windsor holds historical significance. Thomas Jefferson sat in a bow-back. writing-arm Windsor while composing the first draft of the Declaration of Independence in late June of 1776. And when Benjamin Franklin and other members of the Continental Congress voted to secede from the mother country on , July 1, 1776 in Independence Hall, they sat in bow-back Windsors.

There are eight different kinds of American Windsors, including the low-back, or Philadelphia Windsor, named for the city where a craftsman constructed the first Windsor in the colonies, the comb-back, fan-back, bow-back, loop-back, arch-back or New England armchair, rod-back, and arrow-back. Each had its distinct use. Windsor makers socketed all parts together except for the shaped arms of the fan-back, arrow-back, and rod-back chairs. On these, they doweled the inner ends of the arms or screwed them to the back uprights.

Windsor makers preferred pine, whitewood, and basswood for seats, hickory or ash for spindles, maple. yellow birch, or beech for turned legs. stretchers, and supports, and hickory, oak, ash, or beech for hoops. bows, or combs. And because of this, makers gave their Windsors several coats of dark green paint. In the 19th century, small factory workshops produced Windsors of pine and maple. And even to this day, craftsmen still use the same time-tested techniques for constructing reproduction Windsors. 

Most people are familiar with the low-back, barrel-shaped chairs used from the mid 19th to the early 20th century. These were actually descendants of the earliest low-back Windsor chairs made in America. However, these don’t usually appear in historical house museums from the Colonial period. Made from 1725 to1760, this Philadelphia style chair had blunt-arrow legs—turned legs with a cylindrical lower section and ball.

The comb back was the second type of Windsor chair made in the Colonies. The crest rail with its spindles resembled a wide-toothed comb, hence the name. In both England and America, the Windsor became known as the stick chair. The wide saddle seat is half round with a straight front. The deeply curved one-piece arm terminates in knuckled-curved ends and is supported at front by baluster-turned uprights. The back is formed of nine bulbous spindles that pass through the arms and extend upward into a wide comb with volute ends.

Fan-backs had tall spindles flanked by stiles and came in both armchair and side chair styles. 

Legend says that an archer’s bow influenced the design of the bow back Windsor. Realistically, it probably evolved from the comb back. Also known as the hoop-back or sack-back, this Windsor was the most commonly used in America and England from 1740 to 1800 because of its elliptical seat and seven tapered spindles that pierce a semi-circular arm rail and bowed top rail. 

During the 19th century, the Windsor chair had become more decorative, including those with arrow-shaped splats and paint-decorated 

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about old-time winter objects in the 2022/2023 Winter Holiday Edition, with the theme "Winter Memories," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.


Wednesday, September 21, 2022

Simplicity and Comfort Rolled into One

 

QUESTION: Some time ago, I bought a simple chair at a country estate auction. I love that chair but know very little about it. Someone told me that my chair was Shaker. Since I didn’t know much about the Shakers, I couldn’t tell. It just looked like a simple country chair. What can you tell me about my chair? 

ANSWER: Your chair certainly looks like a Shaker chair. But you need to know a bit about the Shakers to know for sure. 

Mother Ann Lee, who led the Shakers to America in 1774, had enough to do to get her sect organized. She began with a community in Albany, New York, and sent out missionaries to establish Shaker communities elsewhere in New England. But it wasn’t until Mother Lee had died and another generation of leadership took over the Shakers that the idea of producing items for sale as a way of supporting the communities came to be.

The Shakers attracted skilled cabinetmakers and craftsmen to their ranks, so it was a natural to use their skills to produce furniture for the communities. By this time, the Shakers were totally self-sustaining. In the early 19th century, the sect began to attract large numbers of people, mostly those who were discontent with society in general or were out of work. The communities offered security and food and lodging to people who might otherwise not have had it.

To support all these people became a major problem. So the elders of each community came up with ways to produce items for sale. Some made chairs, others produced seeds, clothing, especially wool capes, or took in mending and such. Many members were very creative and invented unique items such  as the electric washing machine. They were extremely organized as well, so mass-producing items like chairs wasn’t a problem.  

Those who called themselves Shakers—officially the United Society of Believers in Christ’s Second Appearing—eventually numbered over 17,000. As the number of communities, referred to by the Shakers as “families,” their furniture making flourished. At their peak of production, the Shakers produced chairs at more than 50 locations. From their first base in New York, the Shakers expanded their communities to Connecticut, Massachusetts, New Hampshire, Ohio, Indiana, Kentucky, and even Florida.

The Shakers made many of their chairs along straight and simple lines to be light weight, strong, easy to clean, and comfortable, not every piece of furniture made by Shaker hands is a design masterpiece: Some pieces were poorly crafted. Some were beautifully crafted but poorly proportioned. And some exhibit such bare-bones functionalism that they’re awkward and ugly. Often they’re barely distinguishable from country furniture of the same time and place. Indeed, unscrupulous dealers and auctioneers often promote plain country pieces as Shaker and sell for several times more than they would otherwise bring.

For use in their communities, the Shakers created three kinds of chairs—dining chairs, side chairs and rocking chairs. They designed the dining chairs with low backs so that they would stand clear under the table when not in use. Or they could be hung on a peg rail against the wall while someone cleaned the floor. And to make sure the chair seats stayed clean, they hung them upside down. 

Side chairs came in several different styles. A sister’s chair had a lower seat than the brother’s chair. The dining chairs had two back slats while the side chairs usually had four, all of which were slightly slanted for extra comfort.

As early as the 1820s, many communities began mass producing chairs for both community use and for sale. They used the same designs from the 1840s to the early 1900s. Chairs produced in the early 19th century were mostly for community use. But during the last quart of the century, the Shakers heavily marketed their chairs to the “Outside World.”

The chairs that the Shakers designed to be sold to the public were lean and severe and produced in huge quantities that ended up on back porches and summer cottages across America. Their popularity led other manufacturers to copy their look, and these pseudo "Shaker" chairs appear in quantity at country auctions and small antiques shows. Each of the endless variety of styles has its own Shaker-designated model number. Most were originally stained dark brown, and slat-backs predominate. 

Even though the largest Shaker chair didn’t weigh over 10 pounds and the smallest less than 5 pounds, both could support the weight of the largest person. 

Each community made their chairs a bit different from those of other communities, changing or adding little details. And while they all began with the same design template, each community’s craftsmen added their own touches for their community. For instance, many people believe that all Shaker chairs have tiny acorn finials and arms that terminate in mushroom-shaped turnings. Not so. It’s possible to tell which community made which chair by the shape of the finial alone. The back slats were also often slightly different. The Number 7 rockers, for example, have mushroom arms, four slats, and a shawl rail connecting the backposts that replaces the more common finials. The Shakers often attached a decal identifying the piece as Shaker to the back of a slat or leg. But pieces meant solely for use within the Shaker communities didn’t have decals. 

During the second half of the 19th century, the Shakers painted some of their chairs and woven brightly colored tapes into their seats. Often they combined colors, such as red and black and tan and maroon. Most colors, however, had more conservative names like Trustee Brown, Meetinghouse Blue, and Ministry Green.

In addition to the colorful tape, the Shakers also used cane, rush, and woven splint for their seats.

The woods used in chair construction varied according to the regional supply. But it was always of top quality and well cured. The most commonly used woods included walnut, cherry, butternut, and birds-eye maple, as well as pine and fruitwood if the others weren’t available.

Although for years Shaker chairs never sold for more than $500, now even the most common three-slat rockers bring $600 to $800 or more. Some even go as high as $1,700 to $2,200. 

Pieces from Kentucky, Ohio, and Indiana—often less austere, less "Shaker-looking" than their eastern counterparts—often have a Victorian feel and sometimes resemble local country furniture even more closely than classic eastern designs. .

The quality of many reproductions of Shaker chairs, made using the same tools and techniques, is often so good that they sell for as much as the originals.

For over a century, the creation of Shaker chairs was but a simple fulfilling of the motto of their faith, “Hands to work and hearts to God.”

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about art glass in the 2022 Summer Edition, with the theme "Splendor in the Glass," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.



Monday, April 16, 2018

Restoring an Old Rocker




QUESTION:  This rocking chair was left at our house by one of the previous residents. We live in a very old home (built around 1910) which makes me think the chair might be old too. Can you tell me it’s age?

ANSWER: Your chair probably dates to sometime in the early 20th century. I'm sorry I can't be more exact. It looks like it had been painted and someone tried to strip off the paint. They probably found it too much of a job, so they just abandoned it.

You’ve probably heard on the Antiques Roadshow that refinishing antique furniture can diminish its value. But in a case like yours, it can only improve it.

Before you do anything, take time to inspect your chair for any identifying labels or marks that may help you research its origin. Check the overall condition of the wood. If a piece looks to be valuable, leave it alone, or have a professional do the work. In this case, you can do the work yourself.

I would suggest fixing the chair. The part that seems to be apart on the left side of the seat can probably be pressed down and reglued. Use a generous amount of Elmer's wood glue and several C clamps. Let it set for several days.

Wash the chair using a sponge with a scrubby side and a mixture of anti-grease dishwashing detergent and water. You can use this on your chair because it’s been fairly stripped down, but you wouldn’t use the scrubby sponge on a piece with a varnished or painted surface, no matter how bad it looks. Don’t get the chair too wet. Do one part at a time and wipe immediately.

After the chair dries, you'll want to sand it---first with a 150-grit sandpaper wrapped around a block of wood or one of those sanding blocks. Follow this with a finer grade.

Finally, you'll want to select a good paint. Although Home Depot has some great
one-coat paints, in this instance you probably should use an undercoat and a final coat. The wood is dry and has been through a lot, so you'll want to seal it. Frankly, you can paint it whatever color you like. If you can see the color of the old paint, you could use that as a guide. Choose a semi-gloss finish. And give the seat at least two coats.

Even if a piece isn’t a rare antique, it’s best to take the path of least resistance. Sometimes, all a piece will need is a good cleaning. Murphy’s Oil Soap will do a good job while giving the wood back some of its much-needed oil.

The joints of older pieces of furniture tend to dry out over time. This causes them to loosen. Using a little wood glue and a special glue applicator syringe, it’s possible to leave the piece intact while re-gluing them. You’ll also need some C clamps and perhaps one of those fabric clamps to hold everything in place while the glue sets.

If you have a piece of furniture with parts missing, you can try to replace them. However, this may take more woodworking skills than you possess. The best advice is not to try gerry-rigging a part if you can’t find a replacement and just leave the piece as is. Finer pieces may indeed be worth the cost of professional restoration.

If you can fix up this old rocking chair, it will make a fine addition to your porch and give you pleasure for years to come.

To read more articles on antiques, please visit the Antiques Article section of my site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about the Victorians in the Winter 2018 Edition, "All Things Victorian," online now.  



Wednesday, July 12, 2017

A Question of Value



QUESTION: I recently purchased a beautiful old armchair from a consignment shop. It looks a lot like a Philadelphia Chippendale chair but I can’t be sure. Also, how do I determine the value? Can you help me?

ANSWER: This is a common question. Since the Antiques Roadshow first appeared on the air on PBS, people have been obsessed with knowing the value of their belongings. In fact, that’s the first question most people ask, not what is it or how old is it?

In the case of this chair, knowing what it is and how old it is makes all the difference in its value. Looking closely, you’ll notice that the carving on the knees of the chair is rather shallow. That tells you that this chair was made in a factory and not by hand in a cabinetmaker’s workshop the way authentic 18th-century Chippendale chairs would have been made. Also, the wood is dark-stained to look like mahogany. In Colonial times, cabinetmakers would have used real mahogany wood and then given it several coats of varnish to bring out the smooth surface shine.

This chair is most likely from the early part of the 20th century and not even 100 years old, so technically it isn’t an antique. As a used pieced of furniture, its value will depend on what the buyer wants to pay for it.

While the answer to the question of value may seem simple, in fact, it’s far from it. What type of value–retail value, insurance replacement value, fair-market value, auction value, or cash value? In the end, each of these values will be a different amount. Other factors determining value are age and condition. So where to begin.

Let’s start with retail value. This is the price for which an antiques dealer expects to sell an item after marking it up from the price the dealer paid for it in order to make a profit. This amount can be anywhere from 20 to100 percent of the dealer’s purchase price.

The amount of money it would take to replace an item from a antiques shop or online if it were lost, stolen, or damaged is called the insurance replacement value.

The price that an item would sell for on the open market between a willing buyer and a willing seller is known as the fair-market value. This is also the value that’s used when an item is donated to a charity or is part of someone’s estate.

And when someone puts an item up for auction, the price that an appraiser feels the item should bring at auction, based on comparison of like items and recent other auction sales, is known as the auction value, but has nothing do with the actual value of the item.

However, being told something is worth a specific value is meaningless if the appraiser doing the appraisal has no knowledge of the item itself or the market for it. And auction prices, such as those eBay are not an indicator of true "worth," since many of these sales prices are inflated many times over in the heat of bidding up an item. And a verbal appraisal is worth nothing without a written appraisal to back it up, especially in the case of settling an estate. Only a written appraisal is legally binding in case of damage or loss.

To learn more about how to value your antiques and collectibles, read my article, What’s It Worth?,” in The Antiques Almanac

Wednesday, December 30, 2015

Leave it to the Romans



QUESTION: My father has been trying to find out information about an old wooden armchair that he has that bears a label that reads “Hartwig &Kemper, Baltimore.” He could use some assistance on what it exactly is and the manufacturer. Could you possibly give us some information about this chair?

ANSWER: Your chair is what’s known as a Roman chair and dates from around 1870 to 1880. It’s done in the Victorian Neoclassical Revival style, a substyle of Renaissance Revival. But the origins of this chair go far back in time.

It’s ancient ancestor was the curule chair or sella curulis, from the Latin currus, meaning chariot. In the Roman Empire, only the highest government dignitaries, from the Emperor on down, were entitled to sit on it. It began as a folding campstool with curved legs. Ordinarily made of ivory, with or without arms, it became a seat of judgment. Subsequently it became a sign of office of all higher “curule” magistrates, or officials. According to Livy the curule seat, like the Roman toga, originated in Etruria.

Although often of luxurious construction, the curule chair was meant to be uncomfortable to sit on for long periods, since the Roman public expected their officials to carry out their duties in an efficient and timely manner. Also, its uncomfortability showed that the office held by the magistrate was only temporary, so he shouldn’t get too comfortable.

During the 15th century, both the Italians and the Spanish made chairs with cross-framed legs, joined by wooden stretchers that rested on the floor. A wooden back made the chair more rigid. Dealers in antiquities in the 19th-century called them "Savonarola Chairs." 

By the 1860s, the original curule chair form changed once again. Although some chair makers continued to use the cross-legged design, others modified it so that the legs splayed outward from a rectangular seat while the back had upright spindles and low-relief carving.

Hartwig & Kemper was a well-known furniture manufacturing company in Baltimore, with an office and salesroom at 316-318 W. Pratt Street and a factory at 309-331 W. King Street. The company also had numerous warehouses in the city and stocked a wide variety of furniture, especially chairs and tables, most of which they made of golden oak. Their 1904-05 catalog featured over 300 different pieces of furniture, mostly chairs, settees, couches, and tables. But they were mostly known for their chairs, which they produced in every style and type imaginable.

Your chair, however, was an earlier model made of tiger oak, a variation of golden oak that was dark-stained to look like mahogany. It features the stylized heads of two lions, with their mouths wide open to facilitate lifting the chair, on the top of the back. Your chair is called an elbow chair, presumably because a person could rest their elbows on the arms.

Furniture manufacturers like Hartwig and Kemper interpreted the prevailing furniture styles following the Civil War in homely, machine-made versions as well as more luxurious models.

Victorian furniture offered a mix of styles, almost all revivals of former styles. The Renaissance Revival style, one of four major Victorian revival styles, included such substyles as neoclassic Roman and Greek Revival. The word Renaissance in this case covered just about everything. The result was a stylized mix of many ancient and classic styles.

The end of the Civil War saw an immense trade in relatively inexpensive furniture to meet the demand of the market. Steam-powered machines simplified the manufacture of inexpensive furniture for the mass market. Furniture produced had simple lines, relatively flat surfaces, and a minimum of detailed carving.

Although factories in New York, Massachusetts, and Pennsylvania produced the greatest amount of furniture of all types. All made stock-in-trade furniture for the mass market. Golden or “antique” oak was the wood of choice. Some furniture companies just made chairs—straight-back chairs, dining chairs, rocking chairs.

Equipment they used was efficient enough that one reviewer said they could almost throw whole trees into the hopper and grind out chairs ready for use. However, early machines didn’t do such a great job with the finishing work. Any chairs with even a little carving had to be hand finished, a job entrusted to craftsmen brought from Europe. Sometimes, factory owners would use women and children to cover chair seats for very low wages.

The buying public at the time seriously considered price as well as style and comfort. By the end of the 1860s, Hartwig and Kemper were turning out large quantities of furniture, especially chairs.


Monday, April 13, 2015

Bent Into Shape



QUESTION: I recently purchased two bentwood chairs at an antique shop in a nearby town. Both have woven cane seats and the number “14" pressed into the wood under the rim of the seat. I bought them to use in my kitchen. The cane is in good condition and the chairs are stained a dark brown. Can you tell me anything about these chairs—who made them and how old are they?

ANSWER: You made a great purchase. Your chairs are commonly known as “bistro” chairs, and while most people think they date from the early 20th century, they actually date back to the mid 19th century.

Michael Thonet (pronounced “toe-net”), a clever and creative cabinetmaker from Boppard am Rhein, Germany, invented the process for bending wood and as a result created the first pieces of bentwood furniture. He originally made your chairs in 1859, however, his company, which is still in existence, made over 50 million by 1930. So yours could date from the early 20th century.

Thonet, the son of master tanner Franz Anton Thonet, started out as a carpenter's apprentice in 1811. Eight years later, he opened his own shop. In the beginning, he carved his pieces from European beechwood.

In the 1830s, Thonet began trying to make furniture out of glued and bent wooden slats. His first success was the Bopparder Schichtholzstuhl, or Boppard layerwood chair, in 1836. The following year, he purchased the Michelsmühle, the glue factory that made the glue that he used. However, he failed to obtain the patent for his new process in Germany and England in 1940, so he tried again in France and Russia the next year, but again failed.

The steam engine appeared on the scene around the time that Thonet's was experimenting with his bending process. He discovered that he could bend light, strong wood into curved, graceful shapes by forming the wood in hot steam. This enabled him to design elegant, lightweight, durable and comfortable furniture, which appealed strongly to style trend at the time. His pieces were a complete departure from the heavy, carved designs of the past.

At the Koblenz trade fair of 1841, Thonet met Prince Klemens Wenzel von Metternich, who was enthusiastic about Thonet's furniture and invited him to his Vienna court. During 1842, Thonet presented his furniture—particularly his chairs—to the Imperial Family. On July 16 1842: Metternich granted Thonet the right "to bend any type of wood, even the most brittle: into the desired forms and curves by chemical and mechanical means." The Prince granted him a second, nonrenewable 13-year patent on July 10, 1856 "for manufacturing chairs and table legs of bent wood, the curvature of which is effected through the agency of steam or boiling liquids.”

When his first factory in Boppard establishment got into financial trouble, he sold it and moved his family to Vienna, where in 1849, he opened a new factory called the Gebrüder Thonet. In 1850, he produced his Number 1 chair, which he intended to sell to café owners. 

He received a bronze medal for his Vienna bentwood chairs at the London World's Fair in 1851, at which he received international recognition. At the next World's Fair in Paris in 1855, he received the silver medal for his new and improved bentwood chair design.   In 1856, he opened a new factory in Korycany, Moravia because of the country’s ample supply of beechwood.

By 1859, he developed his most famous chair—the Number 14, known as Konsumstuhl No. 14 or coffeehouse chair No.14—for which he finally received a gold medal at the 1867 Paris World's Fair.

Thonet produced his No. 14 chair using six pieces of steam-bent wood, ten screws, and two nuts. He made the wooden parts by heating beechwood slats to 212 °F, pressing them into curved cast-iron molds, then drying them at 158 °F for 20 hours. The chairs could be mass-produced by unskilled workers and disassembled to save space during transportation—an idea used today by the Swedish company IKEA to flat-pack its furniture.

The firm’s later chairs used eight pieces of wood and also had two diagonal braces between the seat and back to strengthen that particular joint.

Today, a pair of these icon chairs with a table is selling on eBay for nearly $1,000.



Tuesday, January 27, 2015

The Other Arts and Crafts Designer



QUESTION: I have a Mission chair that has been in my family for decades. I never paid much attention to it. But recently when I was cleaning it, I turned it over and noticed a label under the arm of the chair which reads, "Limberts Arts and Crafts Furniture/Trademark/Made in Grand Rapids and Holland.” I know that Grand Rapids is in Michigan, but did this company also make furniture in the Netherlands? And just who is Limbert?

ANSWER: Charles Limbert made what you call “Mission” furniture in Grand Rapids and Holland, Michigan. In fact, his furniture wasn’t constructed in the Mission Oak style, which actually was a style of Arts and Crafts furniture that developed just before the turn-of-the-20th century.  This wasn’t as much of a style as what manufacturers called furniture made of oak that featured simple horizontal and vertical lines and flat panels that accentuate the grain of the wood. It was supposed to emulate furniture of the Spanish missions in California and Texas. What Charles Limbert made was furniture in the pure Arts and Crafts style.

The Arts and Crafts Movement in America originated in mid-19th-century England where the teachings of John Ruskin and William Morris popularized social reform. The movement began as a revolt against the Industrial Revolution and the dehumanization of the workers being replaced by machines. Americans learned about this movement through Gustav Stickley's magazine The Craftsman. Hand craftsmanship and a return to simplicity became hallmarks of the movement. These ideals applied not only to the lifestyle of the follower, but also to furniture and accessories in the home.

Hailed as the beginning of Modernism in the United States, Arts and Crafts interiors were in direct contrast to the preceding Victorian period of ornate decorative arts. Rectilinear forms of quartersawn oak replaced ornately carved rosewood and mahogany Victorian furniture. Mortise and tenon joints, butterfly keys, and the grain of the wood, itself, became the ornamentation on Arts and Crafts pieces.

While Gustav Stickley is best known as the leader of Arts and Crafts Movement in America, other designers also achieved recognition for their contribution to Arts and Crafts design. One of them was Charles Limbert. His company produced high quality Arts and Crafts furniture, but didn’t attempt to influence consumers about the idealized harmony of the Arts and Crafts lifestyle.

In the early 1880s, Charles Linbert began his furniture manufacturing career at the John A. Colby and Co.. in Chicago. He learned all sides of the furniture business— design, production, and marketing. An 1889 partnership with Philip Klingman established the Limbert and Klingman Chair in Grand Rapids, Michigan. Limbert and Klingman manufactured period reproduction chairs for only two years. In 1894, Limbert formed the C.P. Limbert and Company to produce Arts and Crafts furniture.

By 1906, the company had grown and moved to Holland, Michigan. Limbert called his line of furniture "Holland Dutch Arts and Crafts," most likely in reference to the local Dutch population.

Limbert's early furniture shows influences ranging from Japanese to Gothic. Some of his early china cabinets and bookcases have doors with stained glass in an Art Nouveau style.

His peak of design achievement came during 1904 to 1906 when he introduced many of his cut-out designs. Many of his de-signs were internationally inspired by the Vienna Secessionist School and designers such as Scotsman Charles Rennie Mackintosh and Austrian Josef Hoffmann. Limbert employed designers such as Hungarian architect Paul Horti and father and son Austrian designers, Louis and William J. Gohlke.

Limbert promoted his furniture as being "essentially the result of hand labor, with machinery being used where it can be employed to the advantage of the finished article." Like Stickley, he didn’t let machinery control production and emphasized the contribution of skilled craftsmen in his furniture promotions.

He constructed his furniture of quartersawn white oak, with well-executed doweled joints, keyed tenons and splined tabletops. Long, tapering corbels under arms characterize Limbert chairs. Unfortunately, Limbert didn’t extend his wood working quality to the hardware used on his pieces, most of which came from the Grand Rapids Brass Company.

Compared with Stickley's work, Limbert's designs were typically less severe and more visually interesting, usually achieved through the use of cut-outs and other elements inspired by the as English Arts and Crafts Movement and Dutch folk furniture.

His pieces were among the original furnishings of the Old Faithful Inn in Yellowstone National Park. Today, several wash stands remain in the Old House section of the Inn.

Monday, February 10, 2014

Shaker Chair Chic



QUESTION: Some time ago, I bought a simple chair at a country estate auction. I love that chair but know very little about it. Someone told me that my chair was Shaker. Since I didn’t know much about the Shakers, I couldn’t tell. It just looked like a simple country chair. What can you tell me about my chair?

ANSWER: Your chair certainly looks like a Shaker chair. But you need to know a bit about the Shakers to know for sure.

Mother Ann Lee, who led the Shakers to America in 1774, had enough to do to get her sect organized. She began with a community in Albany, New York, and sent out missionaries to establish Shaker communities elsewhere in New England. But it wasn’t until Mother Lee had died and another generation of leadership took over the Shakers that the idea of producing items for sale as a way of supporting the communities came to be.

The Shakers attracted skilled cabinetmakers and craftsmen to their ranks, so it was a natural to use their skills to produce furniture for the communities. By this time, the Shakers were totally self-sustaining. In the early 19th century, the sect began to attract large numbers of people, mostly those who were discontent with society in general or were out of work. The communities offered security and food and lodging to people who might otherwise not have had it.

To support all these people became a major problem. So the elders of each community came up with ways to produce items for sale. Some made chairs, others produced seeds, clothing, especially wool capes, or took in mending and such. Many members were very creative and invented unique items such  as the electric washing machine. They were extremely organized as well, so mass-producing items like chairs wasn’t a problem. 

The Shaker communities' peak growth came in the second quarter of the 19th century. In1840, an estimated 4,000-6,000 members lived in 18 self-contained communities from Maine to Kentucky and west to Indiana. During that time, they produced the icons of Shaker design—the spare, functional chairs that inspire today’s collectors. The best display uncompromising craftsmanship combined with absolute simplicity—ladderback chairs whose turned posts have been pared to the narrowest possible dimensions. At first they produced these chairs for use within the community. But later they chose the best design and reproduced it for sale to the outside world. Customers loved their simplicity and sturdiness and the Shaker chair business took off.

But not every piece of furniture made by Shaker hands is a design masterpiece: Some pieces were poorly crafted. Some were beautifully crafted but poorly proportioned. And some exhibit such bare-bones functionalism that they’re awkward and ugly. Often they’re barely distinguishable from country furniture of the same time and place. Indeed, unscrupulous dealers and auctioneers often promote plain country pieces as Shaker and sell for several times more than they would otherwise bring.

The chairs that the Shakers designed to be sold to the public were lean and severe and produced in huge quantities that ended up on back porches and summer cottages across America. Their popularity led other manufacturers to copy their look, and these pseudo "Shaker" chairs appear in quantity at country auctions and small antiques shows. Each of the endless variety of styles has its own Shaker-designated model number. Most were originally stained dark brown, and slat-backs predominate.

Each community made their chairs a bit different from those of other communities, changing or adding little details. And while they all began with the same design template, each community’s craftsmen added their own touches for their community. For instance, many people believe that all Shaker chairs have tiny acorn finials and arms that terminate in mushroom-shaped turnings. Not so. It’s possible to tell which community made which chair by the shape of the finial alone. The back slats were also often slightly different. The Number 7 rockers, for example, have mushroom arms, four slats, and a shawl rail connecting the backposts that replaces the more common finials. The Shakers often attached a decal identifying the piece as Shaker to the back of a slat or leg. But pieces meant solely for use within the Shaker communities didn’t have decals.

Although for years Shaker chairs never sold for more than $500, now even the most common three-slat rockers bring $600-$800 or more. Some even go as high as $1,700-to-$2,200.

Pieces from Kentucky, Ohio, and Indiana—often less austere, less "Shaker-looking" than their eastern counterparts—often have a Victorian feel and sometimes resemble local country furniture even more closely than classic eastern designs. .

The earliest collectors of Shaker chairs—active from 1920 to 1960—tended to be serious academic types. They studied Shaker life and doctrine, became friendly with living Shakers, and often acquired pieces directly from them as the sect's numbers dwindled. Then Shaker chairs became attractive to doctors, lawyers, and other professionals whose bank balances boosted prices to new levels.



Wednesday, September 18, 2013

The German Influence in American Furniture



QUESTION: My husband and I recently discovered an antique wardrobe at a house sale and fell in love with it. We purchased it but have no idea what style it is. The wardrobe is about six feet tall and has large raised diamond shapes on its doors. There’s an additional diamond panel across the top. Can you tell me what this might be?

ANSWER: It looks like you just bought yourself a fine example of American Biedermeier furniture.

The Biedermeier style, itself, was a neoclassic style that originated in Germany in 1815. Popular until about 1850, it was a potpourri of classic features taken from French Empire, Sheraton, Regency, and Directoire styles.

The style’s name derived from Ludwig Eichrodt and Adolf Kussmaul, who depicted the typical bourgeois of the period in the caricature of a well-to-do man without culture under the name “Gottfried Biedermeier.”—“Gott” meaning “God”;  fried” meaning “peace”; “Bieder” meaning “commonplace”:_meier” meaning “steward”—in their Fliegende Blatter  Pamphlets,  a Viennese journal of the day. Critics adopted this name to describe furniture that represented the unimaginative taste of the average person.

However, the style wasn’t called Biedermeier until 1886, when Georg Hirth wrote a book about 19th-century interior design, and used the word "Biedermeier" to describe domestic German furniture of the 1820s and 1830s.

A simpler version of the French Empire and Directoire styles, Biedermeier furniture was comfortable, unpretentious, and spare and was especially suited to the rising European middle class.

By  the 1840s Biedermeier gradually gave way to the curves and flourishes of the neo-Rococo revival in Vienna. Early pieces were generally rectilinear, undecorated, and simple. Towards the middle of period, craftsmen employed curves more in chair backs, legs, etc. Scroll forms became popular after 1840 on bases and legs often with upper terminal animal heads which were sometimes gilded.

When German immigrants came to America in the mid-19th century, many headed for the middle of the country around Missouri.

In the Missouri settlements, the German cabinetmakers modified the sophisticated Biedermeier motifs to fit the simple tastes of their customers. The style's characteristic decorative veneers, curved legs and chair backs, and geometric shapes on flat surfaces were maintained, but the features were simplified. Countrified versions of Biedermeier chairs typically had outsweeping saber front legs and backs made of two horizontal rails.

Simple examples have wooden seats while more elaborate ones are upholstered. Biedermeier influences in wardrobes include raised-panel doors enhanced by diamond motifs and deep cornices. They would have called these chifferobes.




Monday, June 3, 2013

The First Lawn Chair



QUESTION: We’ve had a Windsor chair in our family as far back as I can remember. I believe it belonged to my great-great grandmother. Today, I use it as a chair at my computer desk. What can you tell me about this chair?

ANSWER: You have a standard bow-back Windsor chair, the kind found in just about every upper class household in Colonial America. While most people consider them delicate antiques, they’re quite sturdy and have many uses.

Today, the ubiquitous white modeled plastic patio chair appears on decks and patios throughout the world. It’s a serviceable chair, easily stacked and stored. But this isn’t the first chair of its kind. In fact, the lowly Windsor chair holds that honor.

One of the most graceful and usable of all traditional chairs, the Windsor is also the most successful piece of furniture in American history. Its origins, however, are English, dating back to the turned and joined stools of 16th-Century England. The name probably derives from Windsor, where a prolific chairmaker  produced and sold the chairs in the 18th Century. He sent them down the Thames River to London where people referred to them as coming "up from Windsor."

Wheelwrights rather than cabinetmakers made Windsor chairs in England. They remained farmhouse or tavern furniture for a long time. But here in America, homeowners embraced the Windsor as a sort of all-around chair. They could be stored in a hallway and brought into any room that needed more seating when guests arrived. They could be easily carried. And they could be brought outdoors to provide seating on the lawn on hot summer days. Even the most prominent members of Colonial communities used them. George Washington seated his guests on the East portico of Mount Vernon in 30 Windsor chairs.

As a piece of furniture, the Windsor holds historical significance. Thomas Jefferson sat in a bow-back. writing-arm Windsor while composing the first draft of the Declaration of Independence in late June of 1776. And when Benjamin Franklin and other members of the Continental Congress voted to secede from the mother country on , July 1, 1776 in Independence Hall, they sat in bow-back Windsors.

There are eight different kinds of American Windsors, including the low-back, or Philadelphia Windsor, named for the city where a craftsman constructed the first Windsor in the colonies, the comb-back, fan-back, bow-back, loop-back, arch-back or New England armchair, rod-back, and arrow-back. Each had its distinct use. Windsor makers socketed all parts together except for the shaped arms of the fan-back, arrow-back, and rod-back chairs. On these, they doweled the inner ends of the arms or screwed them to the back uprights.

Windsor makers preferred pine, whitewood, and basswood for seats, hickory or ash for spindles, maple. yellow birch, or beech for turned legs. stretchers, and supports, and hickory, oak, ash, or beech for hoops. bows, or combs. And because of this, makers gave their Windsors several coats of dark green paint. In the 19th century, small factory workshops produced Windsors of pine and maple. And even to this day, craftsmen still use the same time-tested techniques for constructing reproduction Windsors.

The most common form of Windsor is the bow-back with its elliptical seat and seven tapered spindles that pierce a semi-circular arm rail and bowed top rail.

Tuesday, December 4, 2012

A Longing for the Past



QUESTION: I’m looking for information about a chair that belongs to my sister. What can you tell me about it and who might be the maker?

ANSWER: Your sister’s chair belongs to the Colonial Revival furniture style, the longest-lasting continuous style movement in American history. Ushered in by the Centennial Exposition in 1876 which spawned an awakening of interest in what American furniture had looked like 100 years before. The publicity and preparations for the Exposition, as well as the financial difficulties of 1873, prompted Americans to look fondly back to the early history and events of the nation and long for the perceived security and comfort of those earlier times.

Ironically, there were no antiques or reproductions on display at the Centennial Exposition other than one small exhibit featuring a Colonial kitchen and few personal items belonging to George Washington including his favorite elm chair which was a reproduction.

Those who could afford it wanted to surround themselves with articles from America’s Colonial Period while at the same time attaching an enhanced importance to its history, integrity, and value. But there were many more Victorians wanting Colonial antiques than there were real ones on the market. In 1877, Clarence Cook, an interior designer of the time, published a book entitled, The House Beautiful, in which he stated that if people couldn’t obtain real antiques for their homes, fine reproductions would do just as well.

This revival of interest in Colonial American furniture coincided with the advent of the Arts and Crafts Movement, a return to basic craftsmanship and honesty in construction techniques espoused by William Morris, Charles Eastlake and Elbert Hubbard.

Colonial Revival depends not so much on the actual style reproduced as on the interpretation of the style and the combination of stylistic elements. The original cabinetmakers and furniture companies that made Colonial Revival pieces catered mostly to the carriage trade, the upper crust, many of whom had real antiques in their homes. Most historians believe that furniture makers began copying Colonial pieces soon after the Philadelphia Exposition in 1876. But, in fact, some began long before that as the Colonial Period came to a close with the deaths of the last surviving founding fathers.        

Smith Ely, a New York cabinetmaker working from 1827 to 1832, made what’s believed to be the first Colonial Revival piece—a cane-backed chair. As the 19th century progressed, a number of companies such as Sypher & Company of New York and Potthast Brothers of Baltimore produced authentic reproductions of 18th-century items, often handmade rather than made on an assembly line.

Then along came Hollis Baker, son of Siebe Baker, the Dutch immigrant who founded the firm of Cook and Baker in 1893 in Holland, near Grand Rapids, Michigan. By 1925, Hollis Baker was the president of the company, now called Baker & Company. With a keen interest in handcrafted 18th-century furniture, Baker realized that whoever could solve the problem of combining the quality of handcrafted furniture with the practicalities of mass production would be successful.

Recognizing an opportunity, Baker & Company introduced a line of American reproduction furniture in 1922, a Duncan Phyfe suite in 1923, and furniture based on Pilgrim styling in 1926. In 1927, the company again changed its name to Baker Furniture Factories, specializing in high-quality, faithfully executed reproductions. A line of Georgian mahogany furniture called the “Old World Collection” appeared in 1931, and the following year the company opened the Manor House in New York City to produce top-of-the-line, handmade reproductions, faithful down to the dovetailing, hardware, and finishing.

Later in the 19th century, Ernest Hagen specialized in Duncan Phyfe federal furniture. He and a partner opened a shop in New York to make copies of pieces for clients who wanted the look but not the expense of real antiques.  Museum curators in the decorative arts credit him with reviving Phyfe’s reputation in the 19th century.

Nathan Margolis established a cabinetmaker’s shop in Hartford, Connecticut that lasted for 91 years.  A Lithuanian immigrant, he started his business in 1893 and became well known for his faithful copies of furniture originally made by Eliphalet Chapin, an 18th-century Connecticut cabinetmaker. His son Harold took eventually took over the business, continuing it until 1984.

Margolis not only reproduced old pieces but also adapted them to modern uses. In the 1950s, he produced the double dresser, a style known in Colonial days as the chest on chest, by doubling the width and lowering the height of the traditional Connecticut chest of drawers.

Wallace Nutting, a great proponent of preserving America’s Colonial past, had Windsor chairs made in the Colonial Revival style. During the 1920s and 1930s, he hired cabinetmakers to turn out reproductions which he marketed through catalogs. These chairs contained elements borrowed from a variety of styles. Nutting’s cabinetmakers also used woods that would have never been used for the originals, plus their shellac finish was historically inaccurate. Consumers loved them and soon other furniture manufacturers started making them.

The Dodge Furniture Company of Manchester and J. Sanger Atwill of Lynn, both in Massachusetts, Edwin Simons of Hartford, Connecticut., and Jesse W. Bair of Hamover, Pennsylvania. were some of the other makers of Colonial Revival pieces.

Then of course came the factory induced mutations designed by engineers of the 1920s through the 1950s that have given the term "Colonial Revival" such a bad name. These cheap knock-offs, called “period” pieces, began appearing in thousands of American homes. Bedroom and dining room sets became the most popular ensembles purchased by many a post-war bride and groom.

Monday, April 23, 2012

The Sleeping Chayre



QUESTION: Recently I purchased an old wingback chair at a local antique shop. It seems very old to me since it has ball and claw feet, plus it’s upholstery looks good but older in style, leading me to believe it had been done long ago. But I’m puzzled about the springs supporting the upper pillow. Perhaps they were also added at a later time. Can you tell me more about this type of chair and how old this one might be?

ANSWER: Unfortunately, your wing chair isn’t as old as you think. It dates from the Great Depression of the 1930s and would be considered a Colonial Revival piece. What led you to believe the chair was older were its ball and claw feet, made popular by Thomas Chippendale in the mid-18th century in England.

The Chippendale style of furniture remained popular until the end of the 18th century when interest in it disappeared until the Centennial Exposition in Philadelphia in 1876. The fair inspired furniture makers to re-create the styles of the American Colonial Period until all such furniture became known as Colonial Revival or just “period” furniture. Chippendale created chair designs for comfort, unlike the still, but stylish designs of Federal ones. His wingback chair offered the ultimate in comfort.

But where did the idea for a chair with wings originate? As early as the 17th century, people living in cold weather areas gathered by their fireplaces on crude wooden benches to keep warm. As the century progressed cabinetmakers added high backs with small wings to these benches. While they were functional, they were far from comfortable.

Furniture historians believe they originally intended the wings to prevent drafts from reaching the upper body of those who sat in these chairs. The chairs also prevented the immense heat a roaring fireplace fire from affecting the makeup of ladies who might be sitting too close to it. Makeup then was clay-based and tended to run when heated.


Unlike other chairs, wingbacks offered a greater level of comfort and beauty. With the onset of the 18-century, chairmakers began incorporating upholstery into their wingbacks. Chippendale molded the wingback design by adding elegant frames such as oversized wings and scrolling arms to offset the upholstery. However, most of his designs did not have a pillow seat. Instead, the upholstery was stretched over the springs and small amount of padding. The “knees” of the chair were also chunkier and lower to the ground than those of Sheraton and Hepplewhite.

Also called fireside chairs, wingbacks allowed a person sitting by the fireside to catch the heat while eliminating cold drafts from creeping around their back or sides, so chairmakers developed a new kind of chair known as the “Sleeping Chayre.” Not only did this chair have wings, enabling the sitter to stay warm, it’s back could also rachet to different angles for sleeping.

This led to an unusual use in the 18th century. Respiratory diseases were rampant back then, and people commonly believed that it was better for the sick person to sit up to prevent fluid from accumulating in their lungs. So wingback chairs eventually found a home by the fireplace in American Colonial bedrooms.

It was often common to find two of these chairs—one for the master and one for the mistress of the house—facing a small round table by the fireplace in the master bedroom of the house. Colonial couples often took their supper, known back then as “high tea,” in the warmth and comfort of their bedroom rather than in the drafty dining room downstairs.

Towards the 19-century, chairmakers generously stuffed wingbacks with horsehair for an added dose of padding. Covered in velvet or needlework to imitate contemporary French styles, they sported bright patterns and ornate fabric embellishments.