The Strength of Iron with the Hardness of Stone

 

QUESTION: My grandmother collected all sorts of odds and ends of antique china. Among all the pieces she had were a half dozen plates and jugs that had a special quality about them. She called them her stoneware and said they were probably from the early 19th century. Three of them had the name “Spode” on the back or bottom. Two were pure white with no decoration while the others had Chinese scenes painted on them. Can you tell me anything about them and when they would have been made?

ANSWER: The pieces your grandmother called “stoneware” are actually “ironstone,” a form of china with the look of porcelain. Ironstone china is a hard earthenware similar to porcelain. Although it has the hardness and fine surface of porcelain, it’s opaque while porcelain is transparent when held up to a light. 

Josiah Spode II first made ironstone in 1805. But before that, Miles Mason had been experimenting with a china formula that reproduced the appearance of Chinese porcelain. In 1813, Mason’s son, Charles, took out a patent, listing it as an improvement on ironstone china. Both Spode’s and Mason’s ironstone were equally fine. The blue-white color of both of their wares, as well as their patterns, were  imitations of Chinese wares.

Spode used his ironstone as a way to copy Lowestoft patterns. Lowestoft was a soft-paste porcelain produced in Lowestoft, Suffolk, England, made from 1757 to 1802. It was mostly used for pots, teapots, and jugs, with shapes copied from silverwork or from Bow and Worcester porcelain. The English nobility had their initialed tableware made in China but getting replacements was a slow process, so they called upon English potters to make them.

While these pieces usually had no marks, they sometimes had the name “Spode” impressed in small letters on their bottoms. These patterns included crests and coats of arms and initials in shields with borders of small floral or leaf patterns or delicate ribbons.

One of Spode’s early ironstone patterns, commonly known as “Tree of Life,” is a design of the famille rose type, painted in blue, green, yellow, brown and pink. The mark appeared in black with the name “Spode” set on a rectangle of fretwork.

Patterns on Spode’s Lowestoft also included Queen Charlotte’s pattern, selected for Her Majesty’s visit to the Spode factory in 1817. Decorated in blue, it featured a butterfly border and a Chinese landscape in the center. It was a version of the old willow pattern that was popular on Chinese wares.

Though Spode copied many of his patterns from imported Chinese wares, he adapted others by making them more elaborate than their Chinese originals. Two types of old Chinese porcelain influenced Spode. The first was the old blue-and-white Nankin designs with pagoda and landscape and the butterfly border. The second was the famille rose design of the Yung Cheng period 1734. These patterns were in polychrome with gold and had floral and bird motifs. However, Spode didn’t use these patterns exclusively on his ironstone.

Spode marked the pattern numbers in red on his ironstone in addition to the factory mark. Lower numbers indicate an early production date, enabling pieces to be placed within certain years even if the exact date cannot be identified.

Eventually, Spode’s ironstone came in a variety of patterns. The Cabbage pattern featured a large leaf and flowers. Printed in blue, workers then filled it in by hand in blue, gold, rose, and Chinese red. Another early pattern, Peacock, features birds and peonies in gold and other colors in the famille rose style with a border known as India edge.

Landscape was Spode’s most Chinese looking pattern. It featured Chinese figures in blue and gold in the border with a landscape of water and buildings painted in colors in the center. Bang-up, first produced in polychrome, was a pattern of Chinese flowers. Ship and Star featured a pattern of a ship, buildings and figures set in a center cartouche and has a star border printed in brown.

The pattern known as George IV, was first made for the Coronation of George IV on July 29, 1821. The center of the plate has a design of Chinese still-life motifs with flowers and vases in blue, Chinese red, and gold with a heavy border.  

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about the "The World of Art Nouveau" in the 2022 Spring Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Fish, Lizards, and Snakes---Oh My

 

QUESTION: I’ve had a ceramic plate with fish in relief swimming on it. I originally bought it at an antique show because I liked the funky decoration. I’m not necessarily a collector, although I have some antiques. I’ve never seen a plate like this since. Can you tell me anything about it?

ANSWER: I believe what you have is a piece of French Palissy ware from the 19th century.  Palissy ware usually depicts realistically colored, aquatic landscapes teeming with stalking lizards, swimming fish and slithering snakes amid a rich variety of luxuriant foliage.

Named after the great French, 161h-century, Renaissance potter, Bernard Palissy, who referred to his works as rustique, meaning “in the rustic style.” developed a distinctive style of earthenware. In creating naturalistic scenes of plants and animals and finishing them off with polychrome glazes inspired by nature. He called his three-dimensional creations of lifelike flora and fauna “Art of the Earth” and “rustique,” and they came to be known as “rustique figurines.” Recognizing his talent, the queen of France, Catherine de Medici, brought Palissy to Paris and bestowed upon him the title “The King’s Inventor of Rustic Figurines.”

Palissy wares were so realistic that the creatures he depicted seem ready to hop, slither, or crawl from whatever piece on which they lay. He sculpted each scale on a snake, each rib in a fish’s fin, each vein running through a leaf. He often cast each creature from master molds created from the creatures themselves. The wares often exhibit extraordinary detail and complexity. Although we may see closely matched pairs of urns, vases, or platters, subtle differences in glazing, placements and textures, assure each piece is unique.

The use of many individual molds for components means creating Palissy style wares is far more complicated than many other ceramics. Each piece can take as long as 10 to 15 days over a period of two to three months to complete because of drying time. Artists use individual molds to create each element, which then becomes part of the composition. 

It wasn’t until 250 years after his death in 1590, that French ceramist,Charles-Jean Avisseau from Tours, rediscovered Palissy’s lost secrets and started a revivalist movement lasting 50 years.

Avisseau joined a Tours pottery where he learned the art of ceramics, painting and sculpture. In 1825 he was hired to supervise the ceramic works of Baron de Besenval.

Once. during a visit to the Baron’s home, Avisseau was shown a ceramic piece attributed to Bernard Palissy and became so enraptured by its brilliant enamel and delicate workmanship that he decided to devote his life to the rediscovery of Palissy's secrets-For more than 15 years, he researched the chemistry and fusion of leaded enamels to recreate and then surpass the work of "Master Bernard:' After he exhibited his work at the Great Universal Exhibition of London in 1851 as well as in the 1849 and 1855 Exhibitions in Paris, his fame grew.

Avisseau created clocks, fountains, dishes, candle-sticks. fish baskets and mirror frames, all sought by wealthy collectors, statesmen, aristocrats and museum curators. 

Even though he became successful at producing Palissy ware, Avisseau shared his knowledge willingly with other ceramists. 

Joseph Landais, who was himself a skilled potter, left his family while quite young to work in an earthenware factory. In 1843, he joined Avisseau's workshop for a few months, then established his own shop, claiming that he, not Avisseau, had rediscovered Palissy's secrets. The feud continued throughout Avisseau's life. Landais also exhibited his works at the 1851 Great Universal Exhibition of London, at which he received a meritorious award. He produced a variety of vases, platters, plates, pitchers, mirrors, urns, as well as some monumental works.

Leon Brard painted marine still lifes. He experimented with different clays and glazes during his 10 years in Paris, producing a variety of plates, plaques and platters. In 1859, Brard met Avisseau during a visit to Tours, moved there, and became a frequent visitor to the master's workshop while employed at a local pottery. Two years later, Brard opened his own shop. With an artistic and original style, he became known for his trompe l'oeil works on white faience surrounded by a cobalt blue border in the style of Rouen. At first glance, these works appear to be an artful presentation of fresh fish as might be served in the restaurant.

 reputation encouraged other ceramists to emulate his works. Victor Barbizet established a pottery workshop in 1845 to produce ordinary household ceramics and later Palissy ware. Around 1850, Victor and his son, Achille, moved to Paris and began to mass-produce Palissy ware. Over a period of about 30 years, the firm became very successful, employing approximately 60 workers at its peak.

However, the best known ceramist to follow the Palissy ware tradition was Alfred Renoleau, who lived and worked in and near the town of Angouleme in western France. His factory flourished for nearly 40 years and employed up to 40 workers. 

And like Avisseau, he marveled at the works of Palissy which he saw during a  visit to a decorative arts exhibition in Bordeaux. At night the young Renoleau practiced making ceramics using a homemade kiln in the attic of his house. Later, he persuaded his father to let. him work for one year in a nearby pottery, and promised to return if the craft disappointed him. Needless to say, he didn’t return home. He often signed his earlier pieces “Falder,” an anagram of his first name. In 1889, he moved to nearby Roumazieres at the Polakowski and Company factory where he produced some of his finest work. In 1891,he opened a small factory in Angouleme, but later moved to larger quarters.

While these ceramists made Palissy ware with the same type of clay and glazes as other forms of majolica, Palissy ware usually features darker colors and a more varied palette of brilliant enamels. Palissy ware is best distinguished from other majolica ware by its subject matter of fish, snakes and lizards recreated in realistically depicted pond life_

Because Palissy ware was decorative and non-utilitarian, pieces have survived in extraordinary condition. Unlike Victorian majolica which was made in production quantities, Palissy ware is unique. In most cases an artist working made his pieces alone, with no two being identical. Palissy ware hasn’t been produced for over a century.

Some ceramists marked their Palissy ware while others did not, and some marked their wares sometimes, but not always. Many scratched their signatures or monograms on to their pieces.

The pricing for 19th-century French Palissy ware runs from a few hundred dollars to several thousand or mare. Small works ranging from 2 to 3 inches generally run between $150 and $300 depending on condition and maker. Small pieces include goblets, cache pots, and bud vases. Larger versions, measuring about six inches, often sell for double. Medium size plates measuring 8 to l0 inches in diameter by such ceramists as Barbizet often sell for $1,000 to $2,500. And platters ranging in size from 12 to 18 inches can sell for $2,500 to $5,000. 

Finding Palissy ware is easier in France than in the United States, however, U.S. antique dealers who specialize in majolica often carry it.  

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about "The Sparkling World of Glass" in the 2021 Winter Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Four Times the Beauty?

QUESTION: I recently bought an unusual blackened metal coffee pot at a local antique coop. The person on duty told me it was silver plate.  The mark on the bottom of the pot says “WALDORF SILVER PLATE CO. QUADRUPLE PLATE.” Why is the pot so black and tarnished? Can it be re-plated? And exactly what is quadruple plate?

ANSWER: From the shape of your pot, it seems you’ve discovered a Victorian silver plated water pitcher, not a coffee pot. Coffee pots from this time were taller and slimmer and had a porcelain enameled metal lining. You’ve also asked about one of the mysteries of antique collecting—the extreme tarnishing of what were supposed to be high quality silver plate pieces.

The gleam of polished silver has always been a real joy to the owner be he or she rich or poor. But the cost for all but the very rich was prohibitive. The invention of the process of electroplating changed all that.

The first step towards making silver more affordable came around 1839 with the development of  electroplating. Electroplating was possible as a result of increased knowledge of electrical theory and the galvanic batteries needed in the process. Workers suspended the object to be plated in a conductive solution along with an electrode of pure silver. Passage of electric current through the solution caused pure silver to be deposited on the object to be plated. Direct current generators eventually replaced the original batteries as a source of electricity, enabling manufacturers to use  plating tanks large enough for mass production.

Electroplating was the ideal process to produce durable and attractive articles that had most of the desirable qualities of pure silver at a fraction of the cost. The only alternative process was Sheffield plate, a mechanical process that bonded pure silver to copper by heat. But electroplating soon took over the market.

“White metal," or Britannia metal which had the same characteristics as pewter, or nickel silver usually formed the base for electroplating. Unlike pewter, Britannia contained no lead in the alloy, making it a superior product. The usual composition of Britannia consisted of 140 parts tin, 3 parts copper, and 10 parts antimony.

The finest, and most expensive, objects used nickel silver as the base metal for plating. Nickel silver was an alloy composed of 5 percent to 25 percent nickel, 65 percent copper, and 10 percent to 30 percent zinc. The resultant metal was strong, took the plating perfectly, and even if the plated surface became worn, the nickel silver underneath was a good match for the silver plating.

Although plated objects were far less expensive than solid silver, they were still relatively expensive for the average family. For example a six-piece, silver plate on nickel silver  tea and coffee service, consisting of large and small teapots, coffeepot, sugar dish and creamer, cost around $160 in 1867. A comparable set using silver plate on Britannia metal was around $50 in the same period. The sixth piece was known as a "slop." It enabled the gracious hostess to quickly dispose of the dregs in the bottom of the cup before offering her guest a fresh cup of tea or coffee. The "slop" was an open topped vessel made to match the design of the other pieces.

In addition to the conventional tea and coffee services, 19th-century manufacturers of silver plate offered many other items, including pitchers, trays, casters, wine bottles stands, egg holders, cake dishes, goblets and cups. In addition there was a wide variety of toilet articles available, including soap dishes, tooth-brush holders and bowl and pitcher sets. The truly elegant home might have a silver plated parlor spittoon with locking cover. These sold for $4.50 to $6.25 in 1867, depending on how ornate they were.

At its peak, the silver plating industry during the late 19th century centered around Meriden, Connecticut. It was here in 1867 that Dennis C. and Horace C. Wilcox entered the holloware trade, first dealing in Britannia pieces. Later, around 1867, they established the Wilcox Silver Plate Company and started making quadruple plated holloware.

But what exactly is quadruple plate? Within the silver plate holloware industry, items marked of “Standard” indicated that 2 troy ounces of pure silver had been used to silver electroplate 144 teaspoons. Items marked "Quadruple Plate," on the other hand, used 8 troy ounces of silver to plate the same 144 spoons. Thus, quadruple silver plate pieces  were four times as heavily plated with silver than items  marked "Standard" silver plate.

So why then are so many quadruple plated silver pieces in such tarnished condition. While four times the amount of silver had been used to plate them, the layers of plating on quadruple plate were much thinner than standard plating. And while silver is stable in pure air and water, it tarnishes quickly when exposed to ozone, hydrogen sulphide, or air containing sulphur. Victorian homes not only had some of these elements present due to the use of coal-burning stoves and fireplaces, but many upper middle-class homes had overzealous servants who polished the silver pieces incessantly. Each time a servant polished a piece of quadruple plated silver, he or she removed some of the silver.

However, pieces plated on nickel silver, such as those produced Rogers Brothers and Reed & Barton, don’t look as bad today because of their nickel silver base. And, yes, any piece of quadruple plate can be re-plated to look as good as when it was new. But the cost to value ratio isn’t very good, so re-plating may cost more than the piece, itself, is worth.

A Romantic Tale

QUESTION: Ever since I was a kid, I’ve loved the look of Blue Willow china. My mother had a set that she brought out for special occasions. I used to love to clean my plate so I could see the delicate Chinese blue decoration on the white plate. Recently, I bought an older pink plate made by Homer Laughlin here in the U.S. This is the first time I’ve seen this pattern in another color. What can you tell me about the origin of the plate’s design and about other colors of glaze used to produce it?

ANSWER: The Blue Willow pattern has been in existence since the late 18th century. For over 200 years, it has been one of the most popular china patterns ever made. These mostly blue and white dishes could be found in many households, from the mansions of the wealthy to the more modest homes of the middle class. Today, the pattern can even be purchased in supermarkets.

Many people have looked at the three figures going over the bridge, the pagoda, the boat, and the two birds hovering above the willows and wondered what story inspired  the scene.

The pattern featuring this scene became popular when English ceramic artists combined and adapted motifs inspired the hand-painted blue and white ware then imported from China. In developing the Blue Willow pattern, English potters were finally able to produce a dinnerware to compete with the Chinese imports. At the same time, a new decoration technique using engraved tissue paper transfers allowed potteries to cut costs and mass produce china to sell at a reasonable price.

English potteries produced many different Chinese-inspired landscape patterns using this process, both on bone china and porcelain wares, and on white earthenware. The Blue Willow pattern became the most popular and has remained in production ever since. The majority of pieces have a white background with blue images, but some potteries have used other colors in various pastel tints.

No one knows exactly when the pattern first appeared, but during the 1780s various engravers including Thomas Lucas and Thomas Minton began producing Chinoiserie landscape scenes based on Chinese ceramic originals.  These included scenes with willows, boats, pavilions and birds which artists later incorporated into the Blue Willow pattern. In 1793, Thomas Minton set up his own studio in Stoke-on-Trent, from which he produced willow patterns for Spode and other potteries. Most historians agree that Minton probably produced the Blue Willow pattern known today for Spode around 1790.

Normally, the pattern fills a circular or oval area on a piece of china, surrounded by a decorative border. The waterside landscape represents a garden in the lower right side, in which a large two-story pavilion stands. Approached by steps, the lower story has three large pillars with arched windows or openings between. The roof and gable, shown in three-quarter perspective, is surmounted by a smaller room with a similar roof, and there are curling finials at the gables and eaves. Bushes and trees with varied fruit and foliage, including a large tree rising behind with clusters of oranges, surround the pavilion. The roof of another pavilion appears among the trees to the right and a smaller pavilion stands to the left projecting from the waterside bank. A path through the garden leads to the front of the scene and a fence of diapered panels set in a zigzag fashion crosses the foreground.

On its left side the garden forms an irregular and indented bank into the water. In the  foreground of which a large branching willow tree with four clusters of three leafy fronds leans out. From this point a bridge, usually of three arches, crosses left to an island or bank with a house having a tall arched doorway, and a small tree behind. There are usually three figures on the bridge going away from the garden. Above and beyond this the water forms an open expanse, with a boat at the center left containing two little house-like cabins, propelled by a figure with a punt-pole. In the upper left quarter is a distant island or promontory with pavilions and trees, including a fir. Above the scene in the center is a pair of flying doves, one turning and one descending, their heads and beaks turned closely towards one another in amorous conjunction.

Though there are variations, the Blue Willow pattern always includes the bridge, the garden fence, the central pair of birds, and the particular details of the pavilions and surrounding trees

To promote sales of Minton's Willow pattern, Spode created stories based on the elements in the design.  The most popular is a romantic tale of a wealthy Mandarin who had a beautiful daughter Koong-se. She fell in love with Change, her father's servant. This made her father angry because he wasn’t of the same social class as Koong-se. He dismissed the young man and built a high fence around his house to keep the lovers apart. The Mandarin planned for his daughter to marry a rich merchant, who arrived by boat to claim his bride, bearing a box of jewels as a gift. The wedding was to take place on the day the blossom fell from the willow tree.

On the eve of the daughter's wedding to the merchant, Chang slipped into the palace unnoticed. As the lovers escaped with the jewels, the alarm sounded. They ran over a bridge, chased by the Mandarin, whip in hand. Eventually they escaped on the merchant's ship to the safety of a secluded island, where they would have lived happily ever after. But one day, the merchant learned of their refuge. Hungry for revenge, he sent soldiers, who captured the lovers and put them to death. The gods, moved by their plight, transformed the lovers into a pair of doves. However, early plates lack the doves, suggesting that Spode added this detail to the story later on.

Some people, including author Allan Drummond would have readers believe that the pattern was the result of this story, but in fact, it was the other way around. The romantic story was a marketing tool that Spode used to sell its wares—nothing more, nothing less.

Stretched for Beauty

QUESTION: I recently purchased a beautiful plate at an antique show. The dealer said it’s stretched glass, but I don’t see how that’s possible since it’s a round plate. Can you tell me why my plate is called ‘stretched” glass?

ANSWER: Ever since it’s inception, the term stretch(not stretched) has confused people. It appears mistakenly on price tags in antique shops and in online descriptions. Because of the word “stretch,” People imagine a piece from the 1950s or 1960s that has been stretched to make it taller or wider, but stretch glass is entirely different.

Some people believe stretch glass is swung back and forth on a rod to make it stretch outward. Or, they think it looks like a strange type of Carnival or art glass, so it must be that. Neither is correct. Most of the time, people's first reaction is how beautiful the glass is, but they don't know anything about it.

On eBay there are over 28,000 listing for stretch glass and most are far from it. To collectors, stretch glass is iridescent stretch glass. It differentiates the glass from the common mistake of being considered swung glass. Forty to 50 percent of people think swung vases are stretch glass.

Created by several American glass factories from 1916 to the early 1930s, iridescent stretch glass is a pressed or blown molded glass. It’s shaped and formed—pressed or blown into molds—reheated and then sprayed with a metallic salt or dope, a procedure called  doping, while the piece is still hot. The glass blower then reheats the piece and this is when the stretch marks occur. The glass expands faster where the dope blower applied the dope, which causes a crackled, web-like appearance on the glass. Further shaping emphasizes these stretch marks. Some blowers often shape or "work" the glass a lot which emphasizes the stretch marks in the iridescence while others don’t work their pieces as much, resulting in finer stretch marks and are only satiny.

Collectors consider true carnival, stretch, and art glass with a shiny iridescence doped ware. The difference between them is when the glass blower applies the metallic salts to the glass. While glass blowers shape and form Carnival glass first and then dope it  to create a shimmering to slightly satin iridescent surface, they spray stretch glass  while the glass is molten hot, then reheat and reshape it to make the stretch marks. Another difference is that Carnival glass has a distinctive pattern in the glass mold, such as grapes, butterflies, or geometrical patterns on the inside, outside or on both sides of the glass. Stretch glass has little or no pattern and is very plain.

Confusion seems to set in when people are searching for stretch glass, especially since art glass also has both iridescence and stretch effects. Although art glass is from the same period as stretch glass, the chemicals in the glass make the difference. Additional stretch effects may be from doping the pieces and further shaping. Art glass is also much thinner and more delicate than stretch glass.

People also confuse freeform art glass, produced from the 1950s to the present and commonly posted on eBay, with stretch glass.

Companies that produced stretch glass included Central Glass Works of Wheeling, West Virginia, Diamond Glass-Ware Company of Indiana, Pennsylvania, Jeanette Glass Company of Jeanette, Pennsylvania, Vineland Flint of Vineland, New Jersy, and United States Glass Company of Pittsburgh, Pennsylvania.

The true difference between the stretch glass that different manufacturers produced was the unique colors. Tangerine is a popular color among collectors, along with red and ruby, which each cost more because of their popularity. Wisteria, a purple-colored glass is also popular. Opaque colors of stretch iridescent glass are rare and can be pricey.

The most common stretch glass color that can be found is celeste blue, as well as the topaz and pink. Blue was the  dominant color though, along with topaz, both of which were good selling items when they first appeared. Topaz was a good seller in the 1910s and 1920s because not everyone had electricity. This color catches the light and reflects it very well. There’s also a lot of Florentine green stretch glass out there as well and crystal stretch glass, which has a frosty white iridescence. With so many stretch colors out there including aquamarine, blue smoke, coral, custard, pink and white luster, beginning collectors are sure to find a favorite of their own.

Iridescent stretch glass not only comes in a variety of colors, but also a range of prices. Pieces that once sold for 25 cents to $1 can now be picked for $25 to $50, and even $10 to $15 for more common pieces.

High-end pieces, such as a Fenton No. 604 punch on a red stand, can sell into the thousands. One sold on eBay for $4,200. While the price may seem high, anyone can acquire a decent collection of stretch glass if they buy pieces in the $25 to $100 range.

Setting the Thanksgiving Table

QUESTION: As the holidays approach, I get out my Oneida silver flatware and polish it up for another joyous season. Beginning with Thanksgiving dinner, I use a setting for 12 that’s been in our family for four generations. Except for the classic beauty of this tableware, I know very little about it. Can you please tell me more about Oneida?

ANSWER: The holidays, especially Thanksgiving, are all about traditions in many families. Your use of your Oneida family heirloom is no exception. But Oneida didn’t always make silver flatware. In fact, at one point early in the company’s existence, it made grizzly bear traps.

Oneida, Ltd. actually began as a utopian religious commune in 1848. At that time, there were several such communities that existed in the northeastern United States. Oneida was one of them.

John Humphrey Noyes and his followers founded the Oneida Community in Oneida, New York. Members of this Protestant, religious sect referred to themselves as Perfectionists because they believed that spiritual perfection could be achieved by them in this world. This was a common concept among 19th-century utopian communities. Much like the Shakers, members contributed all their worldly goods to the community when they joined it. The community held all possessions in common, and it provided for everyone's needs. They called this practice "Bible communism.''

But the Oneida Community is best known for its unconventional family arrangements. Members practiced what Noyes called complex marriage—every man was married to every woman, just as every woman was married to every man. Although neighbors surrounding the community saw this as "free love,” the Perfectionists defended complex marriage as noble and unselfish, since all were expected to be loving to each other. It discouraged individual relationships. During its early years, the community also discouraged child bearing, but by 1869 when the community had become more prosperous, its elders selected couples with desirable qualities and encouraged them to bear children. John Humphrey Noyes himself fathered several, including sons who were later very active in the affairs of the future company. Oneida, Ltd.

At first the Perfectionists tried to support themselves by farming and by preserving and selling fruits and vegetables. But this didn’t provide sufficient income, so they branched out into several industrial activities. An 1890s ad offered a booklet which told how the community came to make such interesting and incongruous things as delicious preserved fruits and traps for catching grizzly bears, fine sewing and embroidery silk, d steel chains, and beautiful flatware. Let’s face it, not many silver companies started out making traps for grizzly bears.

By 1877, when the Wallingford, Connecticut, branch of the community started making tin-plated spoons, the original Oneida Community was beginning to break up. In 1879, Noyes moved to Canada and members abandoned the concept of complex marriage. In 1880, the assets of the community were distributed to its members in the form of stock in the newly formed corporation, Oneida Community, Limited, making it one of the earliest joint-stock companies in the United States.

The new company, under the leadership of P.B. Noyes, one of the sons of the founder, first moved its silverplate production to Niagara Falls, New York, and later to Sherill, New York, within walking distance of the original Oneida Community property. It began production of silver-plated flatware and hollow-ware in 1899 using the "Community Plate" mark.

When the community became a corporation, some members found it difficult to adjust to the new business practices and divided into factions, each competing to control the board of directors. But the younger Noyes remained in control and moved the company into manufacturing higher quality wares in sterling silver, including a flatware line called Avalon in 1901. In 1929, it purchased the William A. Rogers Company began producing a lower-quality line of products using that company’s mark. In 1935, the firm changed its name to Oneida, Ltd.

By 1961, Oneida, Ltd. began producing stainless steel flatware. And by the 1980s, Oneida made at least half of all flatware purchased in the United States. At the end of the 20th century, Oneida fell upon tough economic times, becoming the last remaining U.S.-based manufacturer of flatware, knives, forks, and spoons. The resulting economic troubles resulting from 9/11 forced it to close or sell off most of its factories.
It filled for bankruptcy in 2006, and after finally stabilizing, Monomoy Capital Partners, an equity fund based in New York City, acquired it. Today, it services much of the food service industry with both china and flatware.