Punch to Win

QUESTION: My grandfather ran a corner bar. Every afternoon, as men and women would come in from work for a drink before heading home for dinner, he would lay out several punchboards on the bar. For the price of a penny to two bits (25 cents), a player could take a chance to win up to $500. Using a stylus, the player pushed the punch completely through the foil to dislodge a paper message through the back of the board, which the player read, then collected his winnings, but more often than not, discarded in disgust. What can you tell me about these punchboards? Where and when did they originate? And why don’t we play them today?

ANSWER: Punchboards were an early form of lottery game boards used in the 18th century. Though lotteries were as popular back then as they are today, they required a large number of players to be profitable. To enable one or several people to play, a local tavern owner would construct a game board out of wood eight inches square and half an inch thick, then drill small holes in it and fill them with small rolled pieces of paper on which he had written a number. He then covered the holes with paper. After a customer bought a chance at the punchboard, usually for a penny or a nickel, he would puncture one of the hole's paper covers with a nail and retrieve the piece of paper with a number on it. If the number matched those posted, the customer won a cash prize.

As time went on, tavern owners got greedy and realized they could punch the holes with the biggest prizes and keep the money for themselves since they had made the boards. If anyone asked who won the big prize, he would just claim that it was a stranger and put a new board up the next day. Some tavern owners went a step further and didn’t put any winning numbers their boards. Players eventually caught on to this and stopped playing punchboards.

C.A. Brewer and C.C. Scannell of Chicago patented the modern punchboard in 1905.These new punchboards, made of cardboard, had paper covering both the front and back of each hole to help prevent operators from cheating. They came with a metal stylus and became popular purchases at drugstores, bars, and barbershops, much like today’s lottery tickets sold at convenience stores.

Although punchboards had been around for many years, they had never been so available or so portable. Brewer and Scannell created their punchboards so that one customer could play a lottery, with no contribution necessary from anyone else. This enabled the punchboard's owner/operator to sell chances to one customer at a time, and to immediately tell how much he had won, without waiting for all the punchboard numbers to be sold.

The invention of board stuffing machines and ticket folding and plaiting machines in the late 1910s allowed punchboard manufacturers to produce them cheaply. From 1910 to 1915, over 30 million punchboards were sold.

The concept of the punchboard had been around for many years before 1905. Many bar and pool hall owners making their own punchboards, drilling a few holes in a wooden board, then stuffing small pieces of rolled paper into each hole. Unfortunately, the customer only had the punchboard owner’s word that there was a winning number in at least one of the remaining non-punched holes, a fact that often just wasn’t true. Too often the owner/maker of the homemade punchboard would punch out the winning hole for himself, or he wouldn’t even have bothered to put a winning number in any hole. Profits from these homemade punchboards were very high.



Many people soon realized these homemade punchboards were probably fraudulent, thus the popularity of punchboarding declined. It took the invention of punchboard manufacturing machines, which could cover both sides of the board with a sheet of undamaged paper, to convince customers to return to punchboard gambling.

The mass-production of punchboards led to a general standardization of shapes and a standardization of the themes that helped identify different manufacturers' boards. Although most boards were rectangular in shape, their themes were unique. Some of the successful themes featured drawings of shapely pinups, and titles that implied that certain boards offered big payoffs, such as Win u Ruck, Barrel of Winners, and Sweepstakes Parley. Some punchboards had themes featuring racy drawings and titles such as Easy Double, Big Gusher, and Lady Your Fat is Showing.

Some punchboards had as many as 10,000 holes, and some as few as 25. Some paid out prizes instead of money, such as cigarettes, and some guaranteed that everyone was a winner. But they all had one thing in common—their calculated average gross profit or what the board's owner could expect as his profit when he sold all the holes and gave out all the prizes.  Not had, in an era when lunch cost 25 cents and a gallon of gas cost 10.

Punchboard sales declined significantly after WWII, as many states made them illegal.  Many manufacturers attempted to disguise the gambling nature of the boards by stating that prizes were "for trade only" and not redeemable for cash. Cigarette, cigar, and beer companies used punchboards as an advertising medium, featuring packages of cigarettes or bottles of beer as prizes on their punchboards instead of cash. While some of these boards were operated as advertising gimmicks, most were still played for cash.

Despite the millions of punchboards produced, it’s difficult for collectors to find non-punched or unusual punchboards because most were simply thrown away when their original owner felt the board would no longer sucker another coin from an unwitting player.

 prices range from a couple of dollars far a board with dog-eared edges and faded colors, up to several hundred dollars for a non-punched board in pristine condition. As with most collectibles, condition is important in a punch-board's cost. And  some punchhoard themes have remained consistently more desirable, therefore more costly.

Though there have been numerous lottery-type games invented over the years, non fired the imagination o f gamblers and collectors like the punchboard.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about vintage games in the 2019 Holiday Edition, "Games, Games, and More Games," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Monopoly---The Early Days

QUESTION: I recently purchased a box lot at a country auction. In it I discovered a piece of oil cloth on which seems to be drawn a game board much like the one used for Monopoly. However, the names of the streets aren’t the same. Can you tell me anything about this?

ANSWER: What you’ve uncovered is an old game board from the early days of Monopoly.  Before Charles Darrow of Philadelphia commercialized the game and sold the rights to Parker Brothers, people made up their own game boards and used odds and ends for playing pieces.

It all began when Elizabeth (Lizzie) Magie Phillips created a game called “The Landlord’s Game” in 1904. As a proponent of the economic ideas of Henry George, she designed her game to teach the single-tax theory as an antidote to the evils inherent in monopolistic land ownership. It caught on with college students who played it in their dormitory rooms. But since they were often low on cash, they made their own boards.

The Landlord’s Game came in two parts: The first was like Monopoly, a game in which there’s only one winner. But in the second part the game employs the same capitalistic principles but mixes them with a healthy dose of tax reform, to prevent the evils of monopolistic ownership, and then transforms all the players into enlightened winners.

While the game board resembles the one for Monopoly, the names, drawings, colors and the like used on it are different. It’s painted with blocks for rental properties such as "Poverty Place" (rent $50), "Easy Street" (rent $100) and "Lord Blueblood's Estate " (no trespassing - go to jail). There are banks, a poorhouse, and railroads and utilities such as the "Soakum Lighting System" ($50 for landing it) and the "PDQ Railroad" (fare $100). And, of course, there’s the famous "Jail" block. Players could only rent properties on Phillips's board, not acquire them. Otherwise, there’s little difference between The Landlord’s Game and the Monopoly of today.

After Phillips published her game in 1923, it became popular as a grass roots movement. One of the people who became addicted to the game was Ruth Hoskins, a young Quaker woman from Indiana who went to teach at the Atlantic City Friends School in the Fall of 1929. Earlier that year, she learned to play a version of the Landlord's Game, called Auction Monopoly, from her brother, who learned it at college. Early in 1930, Hoskins taught it to her fellow teacher Cyril Harvey and his wife, Ruth, and the Harveys played it with their friends Jesse and Dorothea Raiford. It was Ruth Harvey who drew the first Atlantic City Monopoly board with Atlantic City street names.

The Harveys lent their games to Quakers staying at Atlantic City hotels and also taught their relatives, Ruth and Eugene Raiford, who, in turn taught their friend, Charles Todd, a manager of one of the hotels. Todd then taught the game to his hotel guests Esther and Charles Darrow.



Darrow liked the game so much, he enhanced the design and made 5,000 sets by hand in his basement. He sold these to Wanamaker’s, a highly regarded Philadelphia department store, as well as F.A.O. Schwartz, New York’s famous toy store. A friend of Sally Barton, the wife of the president of Parker Brothers, told her about this new game and the rest, as they say, is history.

The royalties from sales of Monopoly soon made Darrow a millionaire and newspapers touted Darrow as the inventor of Monopoly. And while he made lots of money from it, all he did was organize the game and sell it. Since Phillips had actually created a different game, albeit similar, she had no rights to the game of Monopoly, which had been developed by many people over time, much like the Linux operating system for computers.


Learn more about the game of Monopoly by reading "Pass Go and Collect on Early Monopoly Games" in #TheAntiquesAlmanac.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about vintage games in the 2019 Holiday Edition, "Games, Games, and More Games," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

The Whimsy of Murano Glass

QUESTION: My mother had this colorful little glass owl, and I had it sitting downstairs for many years on a shelf and had forgotten about it. Actually, I never liked it. But I knew nothing about it. I've tried and tried to find out about it online, but discovered nothing that would help me identify it. Do you know anything about it? Is it from the 1960s or 1970s?

ANSWER: Your owl vase comes from the Island of Murano in the Venetian Lagoon. While Murano glass has been made for several centuries, collecting antique pieces may be a bit over the budget of most people. However, pieces like this one from the 1960s are much more affordable and do pop up at flea markets from time to time.

Murano glass objects have gone up in price in recent years. Those items made in the 1950s are especially popular because of their reasonable prices. Typically, Murano pieces are low bowls and ashtrays with abstract shapes. Some are rounded or blobbed, kind of like an amoeba. Others have pointed "fingers" in the design which reach outward or up in many directions. A few stand higher, with fingers reaching upward to form a handle for a basket. There are also bud vases. All are have deep, vibrant colors, and all are heavy and have polished smooth bottoms.

Murano is a series of islands linked by bridges in the Veneto, or Venetian Lagoon, less than a mile north of Venice. Today, it has a population of over 5,000 and is famous for its glassmaking. This reputation as a center for glassmaking came about when the Venetian Republic, fearing fire and destruction of the city's mostly wooden buildings, ordered glassmakers to move their foundries to Murano in 1291. The glassmakers of Murano have specialized in fancy glasswares ever since.

They developed or refined many glassmaking technologies, including crystalline glass, smalto or enameled glass, goldstone or golden glass, mullefiori or multicolored filement glass, lattimo or milk glass, and imitation gemstones made of glass. Today, the artisans of Murano still use these centuries-old techniques, crafting everything from contemporary art glass and glass figurines to Murano glass chandeliers, as well as tourist souvenirs..

Murano glassmakers eventually became the island’s most prominent citizens. By the 14th century, glassmakers could wear swords, enjoyed immunity from prosecution by the Venetian state, and had permission for their daughters to marry into Venice’s most affluent families. But there was a downside. Glassmakers weren’t allowed to leave the Republic. Anyone caught exporting professional glasmaking secrets was put to death. Many craftsmen took this risk and set up glass furnaces in surrounding cities and as far afield as England and the Netherlands. By the end of the 16th century, three thousand of Murano island's seven thousand inhabitants were involved in some way in the glassmaking industry.

The late 19th century saw a resurgence in the art of glassmaking on Murano. By the turn of the 20th century, they only produced special pieces for La Biennale di Venezia, the Venice Biennale, an international art exhibition that began in 1895.

Following World War I, the glassmaking factories began normal production of non-traditional pieces. By the 1930s, they began producing pieces in the Art Deco style. This continued until the Biennale of 1942, at which the Murano glassmakers outdid themselves by exhibiting pieces in exciting shapes and colors that brought a lift to war-weary Venice.

Some of Murano's historical glass factories, including De Biasi, Gabbiani, Venini, Salviati, Barovier & Toso, Pauly, Berengo Studio, Seguso, Formia International, Murno Gladst, Simone Cenedese, Alessandro Mandruzzato, Vetreria Ducale, Estevan Rossetto 1950, remain well known brands today,. The oldest glass factory is Antica Vetreria Fratelli Toso, founded in 1854.

Overall, the Murano glass industry has been shrinking as demand has waned. Imitation works from Asia and Eastern Europe have stolen an estimated 40-45 percent of the market for Murano glass, and public tastes have changed while the designs in Murano have largely stayed the same. The difficult and low-paying nature of the work has decreased  the number of professional glassmakers in Murano from about 6000 in 1990 to fewer than 1000 today.

Today, about 50 companies use the Artistic Glass Murano® trademark of origin.  Regionale di Veneto Law Numero.70, passed in 1994, introduced this trademark and continues to regulate it. While glass factories on Murano aren’t required to apply for the trademark and many choose not to, works that bear it have their authenticity guaranteed.

One of the main characteristics of Murano glass is its bubble-free quality. By adding fluxes and stabilizers such as soda and lime to silica sand, glassmakers can melt the glass at a lower temperature, making the glass homogeneous and bubble free. While basic Murano glass is colorless, the addition of small amounts of minerals, oxides, and chemical derivatives to the base composition of the glass powder gives it its brilliant colors.

Today, the island of Murano is synonymous with glass. Everything imaginable is made from Murano glass: wine goblets, vases, candlestick holders, miniature animals, paperweights, chandeliers, lampshades, dinner services, tiny pieces of glass candy, beads, and every kind of jewelry you can imagine. There’s tremendous variety in quality, price, and style. When it’s quickly turned out for a cheap profit among the tourist trade, it can look hideous. When it’s well done, Murano glass is exquisitely beautiful.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about vintage games in the 2019 Holiday Edition, "Games, Games, and More Games," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

The American Look of Danish Modern

QUESTION:  My wife’s mother bought this piece of furniture around 1976.  It seemed to be an antique back then. The label on the back says it’s from Meier & Pohlman Furniture Company.   I looked online and haven’t found anything quite like it with a curved top. I’m interested in knowing more about this piece?  Can you lead me in the right direction?

ANSWER: I can do better than lead you in the right direction. I can take you there. But first, you need to know more about what style your cabinet is. This china cabinet is a form of Danish Modern, an American version in fact, that was originally part of a suite of dining furniture. The Meier & Pohlman Furniture Company made it in the early 1950s.

Danish modern is a style of minimalist furniture and housewares from Denmarkthat originated with the Danish design movement. In the 1920s, Kaare Klint embraced the principles of Bauhaus modernism in furniture design, creating clean, pure lines based on an understanding of classical furniture craftsmanship coupled with careful research of materials, proportions and the requirements of the human body. With designers such as Arne Jacobsen and Hans Wegner and associated cabinetmakers, Danish furniture thrived from the 1940s through the 1960s. Adopting mass-production techniques and concentrating on form rather than just function, Finn Juhl contributed to the style's success.

Adopting the Functionalist trend of abandoning ornamentation in favor of form, he nonetheless maintained the warmth and beauty inherent in traditional Danish cabinet making, as well as high-quality craftsmanship and materials. His use of teak wood added warmth to his pieces.



The development of modern Danish furniture owes much to the collaboration between architects and cabinetmakers. Cabinetmaker A. J. Iversen, who had successfully exhibited furniture from designs by architect Kay Gottlob at the Paris World Exhibition in 1925, encouraged further partnerships. In 1927, with a view to encouraging innovation and stimulating public interest, the Danish Cabinetmakers Guild organized a furniture exhibition in Copenhagen which occurred annually until 1967. It fostered collaboration between cabinetmakers and designers, creating a number of lasting partnerships including those between Rudolph Rasmussen and Kaare Klint, A. J. Iversen and Ole Wanscher, and Erhard Rasmussen and Børge Mogensen.

Following World War II, Danish designers and architects believed that design could be used to improve people's lives. Particular attention was given to creating affordable furniture and household objects that were both functional and elegant. The fruitful cooperation ensued, combining Danish craftsmanship with innovative design. Initially, the furniture was handmade, but recognizing that their work would sell better if prices were reduced, the designers soon turned to factory production. Interest in Danish Modern in the United States began when Edgar Kaufmann, Jr. from the Museum of Modern Art purchased some items for the Fallingwater home designed by Frank Lloyd Wright. This ultimately led to mass-production in the United States, too.

The scarcity of materials after the Second World War encouraged the use of plywood. By the 1940s, the development of new techniques led to the mass production of bent plywood designs by Hans Wegner and Børge Mogensen. They used beechwood for their furniture frames with a teak overlay.

From the beginning of the 1950s, American manufacturers obtained licenses for the mass production of Danish designs while maintaining high standards of craftsmanship. Later, they altered their designs to suit American tastes and introduced American parts  to reduce costs. One of these furniture manufacturers was the Meier and Pohlmann Furniture Company of St. Louis, Missouri.



From 1891 until 1959, the Meier and Pohlman Company manufactured fine wooden furniture. The company's original factory stood close to the Mississippi River, on Second Street. By 1874, when John Meier and John Pohlmann founded their company, lumber yards, saw mills, and other woodworking establishments already crowded this area. Here they had easy access to the rafts of white pine logs floated down the river from Wisconsin and Minnesota. The depletion of the northern forests, however, forced St. Louis furniture makers turned to other sources of wood by the beginning of the 20th century. Meier and Pohlmann, for instance, increasingly relied on rail shipments of oak from Missouri and the Carolinas.

The firm's relocation to Fourteenth Street in St. Louis in 1891 reflected the general westward movement of people and industry in the neighborhood while its tremendous success mirrored the growth of the furniture industry in St. Louis at that time. By 1906, the city ranked first in the country in terms of the volume of furniture produced and its market extended across much of the American West. Initially, Meier and Pohlmann recruited skilled cabinetmakers from Germany to work in their factory. The sons and grandsons of these original workers comprised a large part of the labor force well into the 20th century. Contracts with Sears, Roebuck and Montgomery Ward gave the company a national market for its fine dining room furniture after 1938.

Unfortunately, a dramatic increase in shipping rates and a shift in the public’s interest to the new Mediterranean style, ultimately led to the company's closure in 1959.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about vintage games in the 2019 Holiday Edition, "Games, Games, and More Games," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

And Away We Go!

QUESTION: Now that I’m in my fifties, I look back nostalgically on those cold winter days when snow piled high all around our house and school was closed. Those were the days when I got to spend the day sledding, or as my boyhood friends and I called it, “coasting.” Recently, I picked up this old sled at a flea market. It’s in pretty poor condition, but I’d like to bring it back to life. Can you tell me anything about it? Also, do you have any suggestions for its restoration?

ANSWER: What you purchased isn’t just any typical sled. It’s one made to hold an infant or a toddler or two. It’s also a non-steerable pull sled, unlike the one you probably used on those snowy days, known as a racing sled or Flexible Flyer.

But to really understand where this one came from, it’s important to go back and take a look at how sledding got to be such a popular pastime in America.


The neat thing about sleds is that everyone could enjoy them—young and old, rich and poor. They were quintessentially All-American. To a boy, a sled was his ticket to cheap and exciting wintertime fun. During the 1950s, coasting, as boys dubbed the sport, became the winter pastime of hundreds of thousands of kids living in the northern states.

Though sledding existed in the US since Colonial times, it really didn’t gain popularity until the late 19th century when downhill sledding became an organized sport and sled design a sophisticated art. Racing was what it was all about. Early sleds bore names like the Comet, Reliance, Thunder, or Flying Cloud.

With the invention of the Flexible Flyer, the first steerable sled, by Sameul L. Allen in the late 1880s, sledding drastically changed. Allen’s prominent Philadelphia Quaker parents sent him to the Westtown Boarding School in Chester County, Pennsylvania, as age 11. After graduation, he moved to the family farm in 1861 near Westfield, New Jersey, half-way between Moorestown and Riverton, where he married and became a farmer. Soon he established a company to manufacture farm implements. But since this was seasonal, Allen needed a product he could make in the summer and sell in the winter. He decided to make sleds.

Allen’s first sled, known as the "Fairy Coaster," was a double runner bobsled that held three or four adults. Light and folding easily for transport, the sled’s runners and supports were made of steel with plush seats. But at $50.00, it cost too much to sell in quantity. He began testing his sleds at Westtown School (also known for its part in the development of the game Monopoly), his alma mater.



It wasn’t until he came up with the ideas for a T-shaped runner and slatted seat, both new concepts at this time, that he made any progress. After it was proven, Allen called his sled the “Flexible Flyer,” an appropriate name because the sled was fast considering its weight and size and the only steerable sled at the time.

Allen eventually convinced two great department stores, John Wanamaker in Philadelphia and R.H. Macy in New York, to sell his Flexible Flyers. By 1915, he was selling 2,000 sleds a day.

By 1917, sled manufacturers like Casper H. Oermann of The American Toy and Novelty Works in York, Pennsylvania, built their sleds with hardwoods and nickel plated steel bumpers and grooved runners.

 B. Garton, who began making his sleds in 1879, in Sheboygan, Wisconsin, made his sled decks from a special weather resistant five-layered plywood imported from Finland. He then silk screened colorful designs, using a brilliant red paint known in the trade as "Garton Red," on each deck.

Sleds came in two basic types–clipper and cutters. Designed for boys and perfect for belly flops, the long and low slung clipper sled had its deck mounted directly onto low, "squatty" wooden or metal runners which ended in a point. The rider threw himself on the deck and sped down the hill head first. Speed was most important.

The Standard Novelty Company of Duncannon, Pa, produced The Racer and Sno-ball, both nonsteerable sleds, and the Lightning Guider. By the 1920s, it had produced more children's sleds than any other American company. Today, the factory operates as the Old Sled Works, a museum, antique, and craft center.

Bringing an old sled that has seen better days back to life isn’t difficult. But it does take time and effort. To restore any sled, first sand all the metal parts with coarse sandpaper, then medium, then fine. Give the metal parts an undercoating of RustOLeum paint, followed by a second coat of RustOLeum in whatever color you choose. For the most part, these sleds would have had bright red metal parts.

Next, sand the wooden parts with medium sandpaper until smooth, then wipe down with a dampish cloth, preferably an old washcloth. Repeat the process with fine sandpaper. After wiping down the wood a second time, give it two coats of coat of glossy polyurthethane varnish. You may wish to stain the wood using an oak stain first. Of course, you could choose to paint the desk and surround, but these sleds would have had natural finishes.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about vintage games in the 2019 Holiday Edition, "Games, Games, and More Games," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Let It Snow, Let It Snow, Let It Snow

QUESTION: I have the opportunity to purchase a collection of about 30 snow globes. Are these collectible, and if so, is this a wise investment?


ANSWER: While many people call these little snow wonders snow globes, others call them
water domes, water balls, snow shakers, snow storms, snow scenes, blizzard domes, and snow domes. They have delighted children and adults for more than a century.

In the late 1930s, Hollywood drew attention to snow globes by featuring them prominently in a number of films. In the movie “Heidi, “ starring Shirley Temple movie, the curly-haired child peers into a snow globe of a miniature cabin. And in the film classic, “Citizen Kane,” Charles Foster Kane drops a snow globe with a replica of the sled known as Rosebud onto the floor as he dies.

Collectibles experts believe French glass paperweight makers first crafted them during the early 19th century. They were basically decorated glass paperweights filled with water and white powder. But they didn’t catch on until they appeared at the Paris Universal Exposition in 1878.

Snow globes containing a miniature model of the new Eiffel Tower became a much sought after souvenir at the International Exposition in Paris in 1889, thus becoming the first souvenir snow globe. These snow-filled domes also became popular in Victorian England. By the early 1920s, they made their way across the Atlantic to the U.S. where the Atlas Crystal Works produced many of them from that time period.

The U.S. Patent Office granted  Joseph Garaja of Pittsburgh a patent for new method of manufacturing snow globes. His process required assembling the globes under water, thus eliminating trapped air. His invention allowed the snow globe industry to go into mass production, dramatically lowering the prices of snow globes. His company, Modern Novelty of Pittsburgh, supplied plastic-based snow globes in every size and shape to retailers around the world for several decades.

In the 1950's, one manufacturer decided to add antifreeze to his globes, so they wouldn't freeze during shipping. However, public outcry against this procedure forced the company to abandon it.

Today, most of the world's snow globes, made mostly of plastic, come from China. But before World War II, the Germans and Austrians made them mostly of glass. The snow found inside has been produced from many materials, including bone chips, camphor and wax, ground rice, pottery flecks and porcelain.  In time the glass became thinner, so manufacturers began to use flecks of gold foil. Currently, makers use white plastic or metallic glitter for snow. In addition, each globe contains distilled water mixed with a little glycol to slow the movement of the flakes.

Today, you’ll find snow globes combined with a wide variety of souvenir-type items, including  drinking glasses, salt and pepper shakers, sugar containers, soap dishes, ashtrays, calendars, thermometers, banks and pencil sharpeners. They can feature landmarks, World's Fairs and other  historical events, as well as famous and even infamous characters from the past.

Snow globes are usually inexpensive, however, they have sold for as high as $1,000. Vintage souvenir snow domes sell for a modest $8 to $25. And while some collectors might mix old and new snow globes, most prefer vintage ones from the late 1930s through the 1970s. Souvenir snow globes from the 1960s and 1970s hold their value best, so if the ones in this collection date from that period, you should have a good investment, provided you don’t pay too much for it.

You also need to see the potential of adding to this collection. You can get a head start with it, but only you will be able to judge what direction you want to take it. Buy only vintage ones. Make sure the water is high and clear and that any decals that may be attached to the base of the snow globe are securely attached and in one piece.

To learn more about snow globes read "A Look at the Wintry World Inside" in #TheAntiquesAlmanac.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about vintage games in the 2019 Holiday Edition, "Games, Games, and More Games," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

All That Glitters Isn’t Always Tiffany

QUESTION: I recently bought what I thought was a Tiffany lamp. I paid several hundred dollars for it and thought it was a steal. Now I'm not so sure. I cannot find a signature on it anywhere. Can you tell me if you think it's a Tiffany?

ANSWER: Unfortunately, as the old saying goes, "You got robbed." Well, not exactly. No, your lamp isn't a Tiffany. It's not even close. But what you paid for it probably is what it's worth. And as long as you like it, that's what counts.

The sight of what looks like a Tiffany lamp sends some people into a dream-like state, blinded by the dollar signs in their eyes. Others begin to see dollar signs at the mere mention of the name. Tiffany lamps have become the Holy Grail of antique collecting for many people. To find one—to own one—is paramount to winning the MegaMillions jackpot. And there lies the rub.

Because lamps made by Tiffany Studios command such a high price, people tend to lump all stained glass lamps into this one category. They think that any stained glass lamp is a Tiffany and that they’ll be set for life. In a million-to-one shot, they just might be, but more than likely, their lamp had been made by another company. While its not a fake, neither is it a Tiffany.

Between 1895 and 1915, small factories in New York and Chicago produced a huge variety of mosaic stained glass lamps to satisfy a growing demand for stylish lighting designs to complement the new electric lamps. While Tiffany Studios set the industry standard, other companies produced excellent designs as well.

Companies such as Duffner & Kimberly and Gorham, made lamps of a quality equal to Tiffany Studios and created styles that appealed more to the Victorian taste, although on its way out, that the American middle and upper middle class preferred. Some companies, like Wilkinson, made high quality bases, and took short cuts with their shades. Others, like Unique, focused on creating complex shades and paired them with simpler bases. Many copied Tiffany’s Art Nouveau designs—in many instances almost exactly—and many copied each other.

Tiffany lamps are about the most flamboyant art objects ever produced in America. They attract celebrities, speculators, and decorators, whose buying whims have driven the Tiffany market into a frenzy and then leave it a shambles when the next fad comes along. For the last few years, the market for these wonderful leaded-glass lamps, most produced during the first two decades of this century, has been recuperating from a decade-long manic-depressive binge.

During the 1950's, a few pioneer collectors began looking at the sensuous floral lamps made by Louis Comfort Tiffany and his Tiffany Studios. Louis was the son of the founder of the famous New York jewelry firm, but for most of his life he preferred painting, the  decorative arts, and interior design.




During the 1960s, interest in the lamps grew rapidly because their restless, fragmented, colorful designs fit nicely into eclectic, psychedelic decorating schemes of that time. Inflation in the 1970's drew investors, speculators, and celebrities into a market where prices sometimes doubled from year to year. Recession in the early 1980's drove those buyers from the market, and prices collapsed. Since then, prices for  some lamps have moved back to, or even above, their former highs; but the market is still very selective one.

The current record price for a Tiffany lamp is the $528,000 paid in December, 1984, at  Christie's in New York City for a large floor lamp with a shade in the Magnolia pattern.  The lamp was one of several being sold by record producer David Geffen, who had been a major Tiffany buyer during the era of hectic growth. Although it was set long after those halcyon days, the record was more a last gasp than a portent of things to come. Today, authentic lamps made by Tiffany Studios and signed either “Louis Comfort Tiffany” or “Tiffany Studios” on the rim of the shade go for as high as $30,000. No wonder there are so many “Tiffphonies” out there.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

An Iconic Toy That’s Lasted Over a Century

QUESTION: When I was a kid back in the 1950s, one of my favorite toys was my set of Lincoln Logs. I have a little grandson now and was doing some Christmas shopping the other day when I noticed a set of Lincoln Logs on the shelf. I didn’t know they still made them. So I bought him a set. I hope he gets as much enjoyment from them as I did. Can you tell me anything about this classic building toy? How did it get its start?


ANSWER: Lincoln Logs have long been a favorite toy of little boys. And they didn’t just appear in the 1950s. In fact, they appeared in stores sometime between 1916 and 1918 when John Lloyd Wright was working with his famous architect father, Frank Lloyd Wright. He based the model for the toy on the foundation structure of the Imperial Hotel in Tokyo, designed by his father, consisted of interlocking wooden beams.

When he returned to the U.S., John Wright organized The Red Square Toy Company, named after his father's famous symbol, and began marketing the toy in 1918. He obtained a U.S. patent for it on August 31, 1920, for a "Toy-Cabin Construction". Soon after, he changed the name of his company to J. L. Wright Manufacturing. The original Lincoln Log set came with instructions on how to build Uncle Tom's Cabin as well as Abraham Lincoln's cabin. Subsequent sets were larger and more elaborate. The toy was a hit, following as it did Tinker Toys and Erector Sets introduced a few years before.



This all-American building set consisted of square-notched miniature logs used to build small forts and buildings. The logs measure three quarters of an inch in diameter. Analogous to real logs used in a log cabin, Lincoln Logs come notched so that they may be laid at right angles to each other to form rectangles resembling buildings. Additional parts of the toy set included roofs, chimneys, windows and doors, which bring a realistic appearance to the final creation. Later sets, packaged to build specific theme buildings in which the number of pieces ranged from 120 to 240 pieces, included animals and human figures the same scale as the buildings.

And though the early sets contained pieces made entirely of wood, the company unsuccessfully introduced sets made entirely of plastic in the 1970s, but soon went back to using real wood.

The original Lincoln Log toy set included a set of instructions on how to build the cabin from the book Uncle Tom’s Cabin, as well as instructions for building Abraham Lincoln’s boyhood cabin. The Lincoln Logs became popular quickly, and the basic initial set was soon expanded to include more logs of a greater variety of sizes. With the increased number and sizes of logs, children were able to build much more types of buildings and could exercise their creativity to a much greater extent when playing with the logs.

There’s a disagreement over the origin of the name “Lincoln Logs.” The current distributor of Lincoln Logs, Basic Fun, Inc., claims they were named after former U.S. president Abraham Lincoln because he was born in an old-fashioned log cabin, plus the name invoked patriotism during World War I when Wright invented it. But those friendly with John Lloyd Wright or those who knew people who knew John said the name came from Frank Lloyd Wright’s original name of Frank Lincoln Wright, or even that the name was a play on the term “linking logs,” which is what the logs did.

The toy’s packaging featured a simple drawing of a log cabin, a small portrait of Lincoln and the slogan “Interesting playthings typifying the spirit of America.” Capitalizing on both a nostalgia for the frontier at a time when the United States was becoming increasingly urbanized and a wave of patriotism in the wake of World War I, Lincoln Logs became an instant success.

Originally carved from redwood, the notched building logs are now manufactured from stained pine. Lincoln Logs peaked in popularity during the 1950s when it was among the first toys mass-marketed on television. The toy’s rustic brand tied in perfectly with popular children’s shows such as “Davy Crockett, King of the Wild Frontier” that were watched by tens of thousands of young “baby boomers” on their black-and-white televisions.

John Lloyd Wright sold his company to Playskool in 1943 for only $800. The copyright for Lincoln Logs eventually passed to toy companies Milton Bradley and Hasbro. Since 1991, the rights to produce Lincoln Logs have been licensed by K’NEX, which announced in 2014 that the stackable wooden construction sets would again be manufactured in the United States after years of being produced in China. In late 2017, Basic Fun, Inc., of Florida, bought out K'NEX, when it filed for bankruptcy. Pride Manufacturing, of Burnham, Maine, manufactures Lincoln Logs for Basic Fun. Over 100 million sets have been sold worldwide since the first ones appeared in 1918.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Onions Galore

QUESTION: I have several plates by Meissen with what I believe is called the Blue Onion pattern. Can you tell me more about it?


ANSWER: The Blue Onion pattern is the Meissen company’s most popular and has been for over 250 years.  Because Meissen never copyrighted it, more companies have copied it than any other ceramic pattern. But the pieces made by Meissen, itself, stand above the others because of the way its workers meticulously hand painted the design on each piece.


After Marco Polo introduced Chinese blue and white porcelains to Europe, the demand rose until by the beginning of the 18th century, Europeans clammered for more and more of the finely painted pieces. To satisfy this demand, the East India Company established trade with China and brought to Europe as much of the blue and white porcelain as it could.

But try as it might, the East India Company couldn’t keep up with the demand, so in 1710 Augustus the Strong formed a new porcelain company to produce blue underglaze decorations like those of the Chinese. Johann Gregor Höroldt, a talented porcelain painter who had worked for the Du Paquier Porcelain Company, a competitor of Meissen’s, perfected the blue underglaze paint, which the Meissen Company used to decorate its wares with the Blue Onion pattern, in 1739.

The model for this unique pattern most likely came from a flax bowl from the Chinese K'ang Hsi period, dating from 1662-1722. Originally, Meissen called it the “bulb” pattern. However, since Europeans were unfamiliar with the fruits and flowers shown on the original Chinese pieces, the Meissen artists created hybrids that were more familiar to the company’s customers. The so-called "onions" really aren’t onions at all, but stylized peaches and pomegranates modeled after the original Chinese pattern. They made the flower in the design a cross between a chrysanthemum and a peony and wove the stems of both the fruits and the flower around a stalk of bamboo.

As production continued, Meissen changed the pattern slightly. Originally, the fruits on the border pointed inward with the stem on the edge. But they altered this design by pointing the fruits alternatively inward and outward.

Not only did the Blue Onion pattern become Meissen’s most popular, but it also was its least expensive to produce. The company made money by using lower-paid “blue painters” as well as   apprentices to do the decorating. In addition, the pieces decorated with the pattern didn’t need a third firing which was necessary to fix the enamel decoration on Meissen’s other wares, plus the company decided not to add gilding to the standard pattern.

The Blue Onion pattern achieved popularity again during Victorian times when home furnishings became darker and heavier. It complemented the more elaborate Victorian furniture styles preferred by the new wealthy middle class. Immediately after the Civil War, the pattern took off. Everything from napkins to tablecloths, utensil handles to enameled cooking pots featured it. By the 1870s, the Meissen Company had adapted it to fit nearly every shape of porcelain ware it produced. To distinguish its Blue Onion pattern from those of its competitors, the company put its now famous emblem of Blue Crossed Swords at the foot of the design’s bamboo trunk in 1888.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Setting the Thanksgiving Table

QUESTION: As the holidays approach, I get out my Oneida silver flatware and polish it up for another joyous season. Beginning with Thanksgiving dinner, I use a setting for 12 that’s been in our family for four generations. Except for the classic beauty of this tableware, I know very little about it. Can you please tell me more about Oneida?

ANSWER: The holidays, especially Thanksgiving, are all about traditions in many families. Your use of your Oneida family heirloom is no exception. But Oneida didn’t always make silver flatware. In fact, at one point early in the company’s existence, it made grizzly bear traps.

Oneida, Ltd. actually began as a utopian religious commune in 1848. At that time, there were several such communities that existed in the northeastern United States. Oneida was one of them.



John Humphrey Noyes and his followers founded the Oneida Community in Oneida, New York. Members of this Protestant, religious sect referred to themselves as Perfectionists because they believed that spiritual perfection could be achieved by them in this world. This was a common concept among 19th-century utopian communities. Much like the Shakers, members contributed all their worldly goods to the community when they joined it. The community held all possessions in common, and it provided for everyone's needs. They called this practice "Bible communism.''

But the Oneida Community is best known for its unconventional family arrangements. Members practiced what Noyes called complex marriage—every man was married to every woman, just as every woman was married to every man. Although neighbors surrounding the community saw this as "free love,” the Perfectionists defended complex marriage as noble and unselfish, since all were expected to be loving to each other. It discouraged individual relationships. During its early years, the community also discouraged child bearing, but by 1869 when the community had become more prosperous, its elders selected couples with desirable qualities and encouraged them to bear children. John Humphrey Noyes himself fathered several, including sons who were later very active in the affairs of the future company. Oneida, Ltd.

At first the Perfectionists tried to support themselves by farming and by preserving and selling fruits and vegetables. But this didn’t provide sufficient income, so they branched out into several industrial activities. An 1890s ad offered a booklet which told how the community came to make such interesting and incongruous things as delicious preserved fruits and traps for catching grizzly bears, fine sewing and embroidery silk, d steel chains, and beautiful flatware. Let’s face it, not many silver companies started out making traps for grizzly bears.

By 1877, when the Wallingford, Connecticut, branch of the community started making tin-plated spoons, the original Oneida Community was beginning to break up. In 1879, Noyes moved to Canada and members abandoned the concept of complex marriage. In 1880, the assets of the community were distributed to its members in the form of stock in the newly formed corporation, Oneida Community, Limited, making it one of the earliest joint-stock companies in the United States.

The new company, under the leadership of P.B. Noyes, one of the sons of the founder, first moved its silverplate production to Niagara Falls, New York, and later to Sherill, New York, within walking distance of the original Oneida Community property. It began production of silver-plated flatware and hollow-ware in 1899 using the "Community Plate" mark.

When the community became a corporation, some members found it difficult to adjust to the new business practices and divided into factions, each competing to control the board of directors. But the younger Noyes remained in control and moved the company into manufacturing higher quality wares in sterling silver, including a flatware line called Avalon in 1901. In 1929, it purchased the William A. Rogers Company began producing a lower-quality line of products using that company’s mark. In 1935, the firm changed its name to Oneida, Ltd.

By 1961, Oneida, Ltd. began producing stainless steel flatware. And by the 1980s, Oneida made at least half of all flatware purchased in the United States. At the end of the 20th century, Oneida fell upon tough economic times, becoming the last remaining U.S.-based manufacturer of flatware, knives, forks, and spoons. The resulting economic troubles resulting from 9/11 forced it to close or sell off most of its factories.
It filled for bankruptcy in 2006, and after finally stabilizing, Monomoy Capital Partners, an equity fund based in New York City, acquired it. Today, it services much of the food service industry with both china and flatware.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.