Simplicity and Comfort Rolled into One

 

QUESTION: Some time ago, I bought a simple chair at a country estate auction. I love that chair but know very little about it. Someone told me that my chair was Shaker. Since I didn’t know much about the Shakers, I couldn’t tell. It just looked like a simple country chair. What can you tell me about my chair? 

ANSWER: Your chair certainly looks like a Shaker chair. But you need to know a bit about the Shakers to know for sure. 

Mother Ann Lee, who led the Shakers to America in 1774, had enough to do to get her sect organized. She began with a community in Albany, New York, and sent out missionaries to establish Shaker communities elsewhere in New England. But it wasn’t until Mother Lee had died and another generation of leadership took over the Shakers that the idea of producing items for sale as a way of supporting the communities came to be.

The Shakers attracted skilled cabinetmakers and craftsmen to their ranks, so it was a natural to use their skills to produce furniture for the communities. By this time, the Shakers were totally self-sustaining. In the early 19th century, the sect began to attract large numbers of people, mostly those who were discontent with society in general or were out of work. The communities offered security and food and lodging to people who might otherwise not have had it.

To support all these people became a major problem. So the elders of each community came up with ways to produce items for sale. Some made chairs, others produced seeds, clothing, especially wool capes, or took in mending and such. Many members were very creative and invented unique items such  as the electric washing machine. They were extremely organized as well, so mass-producing items like chairs wasn’t a problem.  

Those who called themselves Shakers—officially the United Society of Believers in Christ’s Second Appearing—eventually numbered over 17,000. As the number of communities, referred to by the Shakers as “families,” their furniture making flourished. At their peak of production, the Shakers produced chairs at more than 50 locations. From their first base in New York, the Shakers expanded their communities to Connecticut, Massachusetts, New Hampshire, Ohio, Indiana, Kentucky, and even Florida.

The Shakers made many of their chairs along straight and simple lines to be light weight, strong, easy to clean, and comfortable, not every piece of furniture made by Shaker hands is a design masterpiece: Some pieces were poorly crafted. Some were beautifully crafted but poorly proportioned. And some exhibit such bare-bones functionalism that they’re awkward and ugly. Often they’re barely distinguishable from country furniture of the same time and place. Indeed, unscrupulous dealers and auctioneers often promote plain country pieces as Shaker and sell for several times more than they would otherwise bring.

For use in their communities, the Shakers created three kinds of chairs—dining chairs, side chairs and rocking chairs. They designed the dining chairs with low backs so that they would stand clear under the table when not in use. Or they could be hung on a peg rail against the wall while someone cleaned the floor. And to make sure the chair seats stayed clean, they hung them upside down. 

Side chairs came in several different styles. A sister’s chair had a lower seat than the brother’s chair. The dining chairs had two back slats while the side chairs usually had four, all of which were slightly slanted for extra comfort.

As early as the 1820s, many communities began mass producing chairs for both community use and for sale. They used the same designs from the 1840s to the early 1900s. Chairs produced in the early 19th century were mostly for community use. But during the last quart of the century, the Shakers heavily marketed their chairs to the “Outside World.”

The chairs that the Shakers designed to be sold to the public were lean and severe and produced in huge quantities that ended up on back porches and summer cottages across America. Their popularity led other manufacturers to copy their look, and these pseudo "Shaker" chairs appear in quantity at country auctions and small antiques shows. Each of the endless variety of styles has its own Shaker-designated model number. Most were originally stained dark brown, and slat-backs predominate. 

Even though the largest Shaker chair didn’t weigh over 10 pounds and the smallest less than 5 pounds, both could support the weight of the largest person. 

Each community made their chairs a bit different from those of other communities, changing or adding little details. And while they all began with the same design template, each community’s craftsmen added their own touches for their community. For instance, many people believe that all Shaker chairs have tiny acorn finials and arms that terminate in mushroom-shaped turnings. Not so. It’s possible to tell which community made which chair by the shape of the finial alone. The back slats were also often slightly different. The Number 7 rockers, for example, have mushroom arms, four slats, and a shawl rail connecting the backposts that replaces the more common finials. The Shakers often attached a decal identifying the piece as Shaker to the back of a slat or leg. But pieces meant solely for use within the Shaker communities didn’t have decals. 

During the second half of the 19th century, the Shakers painted some of their chairs and woven brightly colored tapes into their seats. Often they combined colors, such as red and black and tan and maroon. Most colors, however, had more conservative names like Trustee Brown, Meetinghouse Blue, and Ministry Green.

In addition to the colorful tape, the Shakers also used cane, rush, and woven splint for their seats.

The woods used in chair construction varied according to the regional supply. But it was always of top quality and well cured. The most commonly used woods included walnut, cherry, butternut, and birds-eye maple, as well as pine and fruitwood if the others weren’t available.

Although for years Shaker chairs never sold for more than $500, now even the most common three-slat rockers bring $600 to $800 or more. Some even go as high as $1,700 to $2,200. 

Pieces from Kentucky, Ohio, and Indiana—often less austere, less "Shaker-looking" than their eastern counterparts—often have a Victorian feel and sometimes resemble local country furniture even more closely than classic eastern designs. .

The quality of many reproductions of Shaker chairs, made using the same tools and techniques, is often so good that they sell for as much as the originals.

For over a century, the creation of Shaker chairs was but a simple fulfilling of the motto of their faith, “Hands to work and hearts to God.”

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about art glass in the 2022 Summer Edition, with the theme "Splendor in the Glass," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Knock on Wood

 

QUESTION: Before the pandemic, I had been going to antique shows, especially those that featured more primitive pieces. One of the things that caught my eye was the variety of wooden objects, utensils, and containers on display. I’ve always liked the look of natural wood and think that I might start a collection. But there were so many different items that I don’t know where to start. Can you help me/

ANSWER: As with any type of collection, it’s important to collect what you like. A way to narrow this down a bit might be to think about what you like to do. Are you an avid cook that delights in all sorts of kitchen gadgets? Do you like unique containers? Do you like to work with woodworking tools? Once you decide what category of wooden items you’d like to collect, then, and only then, should you begin purchasing items for your collection. Also, it’s important to set a budget limit—know what you can afford—especially in the beginning. 

Woodenware generally consists of utilitarian items used in the everyday lives of 18th- and 19th-century Americans. Also known as treenware, from the word "treen," an old usage for "from trees." Wood was the component in the construction of many necessities in early American life.

Craftsmen used pine, a soft wood that was east to work with, for making woodenware and boxes. Dough boxes, trenchers—large oval or rectangular serving or preparation bowls---and small boxes made of pine are a favorite of collectors. They also used cherry, poplar, and butternut but didn’t use oak very often.

Fine examples of handmade, early American burl bowls can reach prices of over $1,000. A burl is an abnormal growth on a tree, occurring on a limb or the trunk. It’s harder than the normal wood of the tree. Due to its hardness, woodworkers often burned the piece of burl in the center, than dug it out with tools, finishing it to form the implement. Heavy and tough, the burl exhibits a beautiful and unusual appearance, becoming even more attractive over time when a patina forms. Burl items seem less likely to crack over time than the items made from normal wood. Some larger wooden-ware items may exhibit a partial burl in their construction.

Probably the most common examples of woodenware found were made for food preparation and storage. Family members fashioned many of these items by hand, but unfortunately, they discarded them when they were no longer usable. Hand-planed and carved marks are sure signs of handcrafting, as is a non-symmetrical design. Bowls and dry measures are probably the most common pieces of early manufactured woodenware. But finding a maker’s name on an item is rare.

Butter molds and stamps are another type of woodenware often seen. However, plates, utensils, and cups are scarce and command higher prices. Though handmade bowls sell well, manufactured bowls from the late 1800s and early 1900s are more common and affordable. Most desirable of the manufactured bowls tend to be the unusually large examples, of over 18 inches in diameter.

Designed to hold all types of dry goods, such as flour, cornmeal and other grains, pantry boxes are popular among woodenware collectors. They especially like the covered oval boxes with finger lapping made by the Shakers. The finger lapping helped the boxes keep their shape over time. Makers usually painted many of these. Like most items, it these boxes retain their original paint, the value increases dramatically.

Woodenware also includes items, such as shovels, buckets, tools, and barrels, used in daily life. Coopers made staved buckets and barrels. They constructed the majority of them with iron bands, and occasionally used wood bands.

Grain shovels, hay forks and rakes were some old farm implements made from wood. 

Makers cut early pieces from one piece of wood, with the grip, handle and shovel constituting one piece. Later, they made them from two pieces, joined with nuts and bolts  Farm implements, like rakes, forks and shovels, received a good bit of hard use, and often exhibit wear and tear.

Staved firkins, or sugar buckets, used to hold sugar and other dry goods, and had a  cover, swing handle, and wood bands. Wider at the base than at the top, these buckets came in several sizes. Painted examples are the most valuable. Other utilitarian pieces included sap buckets, used for collecting sap for maple syrup making, kerosene buckets, and drop handle water pails.

Woodenware was made to be used, often strenuously and regularly. Wear and use marks not only add to the intrigue of the piece, but also help in differentiating it from a recently made one. Chop marks usually cover the interior of bowls and trenchers. Stir sticks will be stained from soups and jams. Farmers scraped grain shovels thousands of times against barn floors. In addition, the wood has probably been exposed to a wide range of weather conditions over the years, as people often stored pieces in barns, attics, and cellars. And because some of the earliest pieces of American-made woodenware were quite thin, cracks and breaks were inevitable.

Woodworkers used different finishes on various types of woodenware. They left kitchen implements natural, though the exteriors of bowls and trenchers may have been painted or stained. Cooking oils and fats gives them a smooth, rich patina. Constant handling of the item also contributed to a well-worn look. Original finishes and paints add to woodenware’s value. Old red, blue or mustard paints are especially desirable. 

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about the Sears Catalogue and the items sold in it in "Sears' Book of Bargains" in the 2021 Fall Edition, online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Product Premiums—An Idea Whose Time Had Come

QUESTION: My grandmother has what she calls a “Larkin” desk. It doesn’t look like a normal desk but more like a tall oak bookshelf with a drop-down writing surface. She remembers her parents acquiring it around 1911.  Can you tell me more about it?

ANSWER: One of the most popular items from the Larkin Company was the drop-front combination bookcase/desk, also known as the Chautauqua desk. This desk became a common piece in homes at the beginning of the 20th Century.

In 1875, John D. Larkin opened a soap factory in Buffalo, New York, where he made two products— a yellow laundry soap he marketed as Sweet Home Soap and a toilet soap he called Crème Oatmeal. He sold both products using wholesalers and retailers. Larking originally sold his Sweet Home Soap to street vendors, who in turn sold it to customers along their routes. By 1878, he had expanded his product line to nine types of soap products.




His brother-in-law, Elbert Hubbard, the eventual founder of the Roycroft Arts and Crafts Community, came up with what he called "The Larkin Idea"—door-to-door sales to private residences. To establish brand identity, Hubbard, inserted a color picture with the company's logo into every box of soap as an incentive for customers to buy more soap. Housewives accumulated and traded these picture cards, and eventually the cards became more elaborate. This concept of offering a gift directly to customers was a new approach to marketing. And by the 1890's, Larkin’s premiums had become an overwhelming success and a vital part of the company’s   marketing plan.

The premiums Larkin offered included handkerchiefs with toilet soap, towels with soap powder, or one-cent coins. Eventually, Larkin inserted certificates into the packaged products which could be redeemed by mail at the company’s Buffalo headquarters. A $10 order of soap resulted in the awarding of a premium with a retail value of the same $10. By 1891 he placed his first wholesale order of items to be given as premiums, $40,000 worth of piano lamps. The next year he acquired 80,000 Morris chairs and 100,000 oak dining chairs—all to be given away with the purchase of soap.

Larkin and Hubbard knew the key to mass merchandising was to eliminate the sales force and sell directly to the consumer via direct-mail catalog. Larkin realized he would be better off if he made not only the products he sold, but also the premiums he distributed. His pitch was that since he manufactured the products he sold, unlike Sears & Roebuck and Montgomery Ward and sold them directly to the consumer, he was eliminating the "middleman" and giving the customer better value for the money. The Larkin Company motto became "Factory to Family." By the end of the 19th century, catalogs jammed people’s mailboxes.

The plan worked. Both his product line and his premium line expanded. By 1893, the Larkin Soap Manufacturing Company was sending semiannual catalogs to 1.5 million customers.

His first venture was the furniture assembly plant in Buffalo that made furniture from parts cut and milled in Tennessee. Here for the first time was a major catalog distributor who actually made the furniture they shipped. Furniture was one of the company’s primary premiums. Since Larkin was appealing to the mass market, he made sure to offer furniture premiums that appealed to ordinary people and not the wealthy.

His most famous premium was his oak drop-front desk with open bottom storage, first appearing in the 1901 catalog, that the company gave as a premium for a $10 purchase of soap. Constructed of either cold or quarter sawn oak plank, assembled with nail and glue construction, with a golden finish, each desk featured applied ash or maple molding and trim and back panels of three-layer plywood. Better desks also had stamped-brass escutcheons and brass hinges on the drop panel. Cheaper ones had iron-butt hinges. A somewhat oval French beveled mirror finished off each piece. Variations included a glass front case with a drop-front desk attached to the side, two glass front cases with a desk in the middle, or simply a drop-front desk with a small open bookcase below the drop and candle stands above it, with a mirror in the high . This small desk reflected the taste and style of the Golden Oak period of American furniture in a form modest enough fit into any middle-class home.

This type of desk became "Everyman's" desk and was a common item in most homes of the period. It became a trendy decorating item and remained so for many years. People began to associate Larkin's name to the form, even though his wasn’t the only company to manufacture them, and so evolved what has become known as the "Larkin Desk." Today, Larkin desks sell on eBay for around $400 and sometimes higher.

John Larkin and Elbert Hubbard not only provided the means for a growing American population to stay clean at a reasonable cost, but they also helped them furnish their homes for free.

To read more articles on antiques, please visit the Antiques Articles section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the over 30,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about  the Industrial Age n the 2020 Winter Edition, "The Wonders of the Industrial Age," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques and More Collection on Facebook.

Preservation vs. Conservation

QUESTION: I have several pieces of antique furniture that need some tender loving care, but I’m not sure how to go about it. Can you explain the difference between preservation and conservation? And can you give me some tips on how I can take care of my pieces?


ANSWER: Preservation involves keeping an object from destruction and seeing to it that it’s not irreversibly altered or changed. In conservation, on the other had, the goal is to preserve the maximum amount of the original material, in as unaltered a condition as possible.

Furniture conservation and restoration can be divided into two general areas—structure and finish. Structure generally relates to wood---solid, joined, and veneered. The finish of furniture can be painted or varnished.



Antiques restoration can be an arduous process if the goal is complete authenticity. This is particularly true for museum conservators. For them, authentic material is the actual original material of the object. For example, a chair with its original upholstery, even if it is faded and shredded, is authentic for the conservator and possesses historic value even though it may not be exhibitable. The same chair can be "restored" and looking as it did when new, with replacement fabric copied from the original weave and colors, and upholstered according to the known design of that particular piece of furniture.

Some pieces of furniture, especially those constructed of harder woods, such as walnut, mahogany, maple, oak, or cherry, may only need to have their surface finish preserved. In the case of furniture made of these woods, there may be enough of the original finish left to restore the piece rather than refinish it.

Before doing anything, study your piece. Is the finish pretty much intact? Does the piece have a nice patina? Is the piece more than 100 years old? If you answered yes to even one of these questions, then you should do your best to preserve the original finish of your piece.

The first step in preservation is cleaning. Furniture gets dirty, even grimy over time. Before you can apply a new finish, you need to get rid of all the accumulated dirt and grease that often make it difficult to tell what kind of wood the piece of furniture is made of. Grime can also hide the fine lines of inlay and marquetry. Believe it or not, using lemon oil, a popular furniture polish, can do more harm than good. Since its made of a light petroleum oil and some paraffin wax, the wood doesn’t absorb it. Instead, it acts as a surface dust catcher.

One of the best products for cleaning wood, especially furniture, is Murphy’s Oil Soap. Today, it’s also in a spray bottle, but in case you can’t find it that way, you can make your own cleaning solution by mixing a capful of Murphy’s in a spray bottle of water. For this, you can use any empty spray cleaner bottle, as long as you wash it out thoroughly first. Since water will loosen any glued joint, and also tends to raise the grain of the wood, you don’t’ want to use very much. An old washcloth will do quite well for cleaning.

Spray the Murphy’s on a damp washcloth and then rub it on the surface of the furniture. Rinse the cloth when it gets to dirty. Have a second wet, but wrung out, washcloth ready to wipe off the Murphy’s Oil solution, wringing the cloth nearly dry after every few wipes. You can also use a green scruby cloth, sold in Dollar Stores, if there’s hard to remove grime. A stiff-bristle brush will allow you to get the dirt out of carved and turned areas. The secret is to clean only a small area at a time–one leg of a chair, one part of a chest, and so on. After you clean an area, wipe it dry with an old face towel. Be sure to wash out all your cloths or use others as you progress, especially on a large piece of furniture. After you have finished cleaning your piece of furniture, give it a final wipe with a clean cotton rag and set it aside to dry for 24 hours.

All this cleaning may cause joints to loosen, so be sure to check the structural integrity of your piece before applying a new finish. If joints need to be tightened or reglued, do so before applying a new finish.

Now you’re ready to apply a new finish. You can either use plain tung oil or a product like Minwax® Water-Based WoodSheen® which is a water-soluble mixture of furniture finish and stain that comes in six colors. For a piece that’s got lots of scratches or marks, it’s best to choose a stain color that complements the wood’s original finish.

The final step is polishing the entire piece using a prepared wax like Minwax, which comes in light and dark varieties. Obviously, use the light for woods like oak or cherry and the dark for woods like walnut or mahogany. Apply the wax with a piece of soft cotton cloth like an old athletic sock and after 30 minutes, polish the surface with an old face towel. One coat should do it, but for tabletops, apply two coats of wax.

Rub off the first coat with 0000 steel wool, then apply the second and polish with the towel. The more coats of wax you apply, the more water resistant the top will become. A light polishing once or twice a year will keep your piece in great condition.

There are no short cuts or time savers to this entire process. The work can be slow and at times tedious, but the results are worth it.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 24,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about antique clocks in the Fall 2019 Edition, "It's That Time Again," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

The Ultimate All-in-One

QUESTION: My grandmother had a cabinet in her kitchen which she called a “Hoosier.” She told me her mother left it to her and now I have it in my kitchen. What can you tell me about it?

ANSWER: The modern kitchen with its microwave, glass-topped stove, side-by-side refrigerator, and granite countertops is a far cry from your great-grandma’s kitchen. The most modern thing in her kitchen was her Hoosier, an all-in-one preparation and storage unit that brought her convenience and practicality.

Named after the Hoosier Manufacturing Co. of New Castle, Indiana, the Hoosier cabinet was to become one of the most popular pieces of furniture to hit the American market. Though there were other companies in Indiana that made them, Hoosier Manufacturing built over four million of these special cabinets between 1900 and 1940. Until 1920, the company made and finished their new all-in-one cabinet in natural oak, but as the third decade of the 20th century progressed, they began to offer Hooisers with white enamel-lined drawers. Because of the bright white of the enamel, people called them “White Beauties.”

When the Hoosier first appeared, American homes didn’t have built-in storage cabinets. Soon housewives demanded something in which they could store their baking supplies and equipment, as well as give them an additional work surface. The company quickly adapted the 19th-century baker’s cabinet, a piece of furniture they were already making, to fit the needs of the modern housewife. These existing cabinets featured a work surface to roll out and knead dough, a few cabinets above, and  “possum belly” drawers below to hold flour and sugar. Manufacturers of these baker’s cabinets made the drawers from tin to protect their contents from rodents. At first, they made the work surface of wood, then later employed zinc, aluminum, and porcelain enamel. They attached casters to the legs, both for ease of moving and to keep ants out of the cabinet.

By rearranging the parts of the baker’s cabinet, Hoosier Manufacturing came up with a well-organized, compact unit which answered the housewife’s needs for storage and working space. The company added to these cabinets many improvements, including flour sifters, bread drawers lined with enamel, cutting boards, and an assortment of storage containers, to help the homemaker.

The typical Hoosier cabinet had three sections—a bottom section, featuring one large compartment with a slide-out shelf and several drawers to one side, a top portion only half as deep with several smaller compartments with doors, with or without windows, and a large lower compartment with a roll-top door that could be closed to hide various tools and equipment. Hoosier joined the top and bottom of the cabinet using a pair of metal channels which served as the guide for a sliding work surface, which usually had a pair of shallow drawers attached to its underside. The cabinet, with its work surface retracted, was normally about two feet deep— double that when pulled out—while the cabinet stood nearly six feet high.

A distinctive feature of the Hoosier cabinet was its accessories. Most came equipped with a variety of racks and other hardware to hold and organize spices and various staples. Some came with a hand coffee grinder and a combination flour-bin/sifter, a tin hopper that a housewife could use without having to remove it from the cabinet. Some contained a similar bin for sugar.

To hold a variety of spices and other staples, Hoosiers came equipped with special glass jars, manufactured by the Sneath Glass Company, to fit the cabinet and its racks. Original sets of Hoosier glassware consisted of coffee and tea canisters, a salt box, and four to eight spice jars. Some manufacturers also included a cracker or cookie jar. Some Hoosiers had elastic straps attached on the inside of their doors behind which housewives could place cards with such information as measurement conversions, sample menus, and household tips.

Manufacturers marked their cabinets with an identifying label which was often engraved or stamped onto metal, then screwed onto the front of the cabinet. Some glued paper labels on the back of the cabinet. Both types often disappeared as a result of refinishing.

Though Hoosier cabinets remained popular into the 1930s, they began to fall into disuse as soon as home builders equipped new kitchens with built-in cabinets and other appliances. Today, Hoosiers, dating from 1900-1910, sell on eBay for $500-$2,300. Later models sell for as little as $200.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about western antiques in the special 2019 Spring Edition, "Down to the Sea in Ships," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Somewhere to Dream

QUESTION: My husband and recently purchased an antique four-poster bed from around 1810.  The dealer called it a tester bed. It originally had a canopy which needs to be replaced. Can you tell me what a tester is and something about the origins of this type of bed?

ANSWER: Initially the wooden frame of the bed was far less important that the trappings of textiles that surrounded it. Most any reference to a bed centuries ago actually meant the mattress and whatever cloth materials people piled upon it.

During medieval times there was no particular room set aside for sleeping quarters, thus the bed became almost a room within the household. Some of the more elaborate bedsteads had both a room and sliding panel walls. Occupants could climb inside and stuff them-selves off from the rest of the chilly and drafty residence.

Gradually, heavy curtains replaced the side panels of the "bedroom," but the basic roof remained. The solid roof, known as a tester, retained the name even though the roof covering eventually became one of cloth and curtains as the sides had been.

Basically, a bedstead and two posts supported the roof of these early beds. Over the decades makers adopted a style which incorporated four posts which supported the full tester canopy.

Early in the 18th century, during the Queen Anne period, wealthy homeowners often covered their four-poster beds with velvet and other textiles so extensively that they obscured the basic woodwork. Cabinetmakers used back panels less and less. As the century progressed, the rear posts remained covered with curtains while the front posts became more visible. As a consequence, bed makers carved and decorated the front posts more elaborately.

Some of the most impressive four-poster  beds reached heights of eight feet or more, complete with a sweeping array of curtains and canopy. Cabinetmakers made sturdy frames from mahogany or walnut. People could close panels of curtains at night for more warmth and security. Matching coverlets and bases then totally enveloped the grand bed in a sea of cloth.



Wealthy homeowners continued to import fabric for their bed coverings from Europe in the 1750s and 1760s. But with the increase in leisure activities and attention to developing social graces that characterized the time, fancy needlework done by women and school girls often supplied the decorative detail.

By the dawn of the 18th century, the finest bed available was the Chippendale bed. The Chippendale and those similar in style displayed predominantly high foot posts which were handsomely carved and ended elegantly with ball and claw feet. By contrast, cabinetmakers sometimes didn’t carve the head posts and instead left them plain to be extensively decorated by fabrics. Elaborate decorating of the beds gradually increased as owners opted for serpentine headboards and reeled posts in lieu of additional drapes.

By the 1800s, the lavish use of fabrics on beds had diminished considerably and the wood itself had more of a prominent role in the overall design. Almost without exception, cabinetmakers carved or decorated posts. In addition, homeowners began placing their beds in separate rooms designed for sleeping, usually on the second floor of their houses, instead of in parlors or various other locations in their homes.  .

The rise of the Empire period in the 1820s had an impact on a vast assortment of furniture, including the bed. Scrolled headboards were very fashionable, and posts were decorated with acanthus leaves and detailed beading. Mahogany remained one of the most popular woods of choice.

It wasn’t unusual for the well established to spend more for their bed furnishings than on the actual wood structure, itself. They preferred bright colors over white and added  fine linen-like textiles in shades of red, blue, yellow and green. Many also used generous amounts of silk and lace, along with woolen cloths.

To read more articles on antiques, please visit the Antiques Article section of my Web site.  And to stay up to the minute on antiques and collectibles, please join the other 18,000 readers by following my free online magazine, #TheAntiquesAlmanac. Learn more about religious antiques in the special 2019 Winter Edition, "The Old West," online now. And to read daily posts about unique objects from the past and their histories, like the #Antiques & More Collection on Facebook.

Leave it to the Romans

QUESTION: My father has been trying to find out information about an old wooden armchair that he has that bears a label that reads “Hartwig &Kemper, Baltimore.” He could use some assistance on what it exactly is and the manufacturer. Could you possibly give us some information about this chair?

ANSWER: Your chair is what’s known as a Roman chair and dates from around 1870 to 1880. It’s done in the Victorian Neoclassical Revival style, a substyle of Renaissance Revival. But the origins of this chair go far back in time.

It’s ancient ancestor was the curule chair or sella curulis, from the Latin currus, meaning chariot. In the Roman Empire, only the highest government dignitaries, from the Emperor on down, were entitled to sit on it. It began as a folding campstool with curved legs. Ordinarily made of ivory, with or without arms, it became a seat of judgment. Subsequently it became a sign of office of all higher “curule” magistrates, or officials. According to Livy the curule seat, like the Roman toga, originated in Etruria.

Although often of luxurious construction, the curule chair was meant to be uncomfortable to sit on for long periods, since the Roman public expected their officials to carry out their duties in an efficient and timely manner. Also, its uncomfortability showed that the office held by the magistrate was only temporary, so he shouldn’t get too comfortable.

During the 15th century, both the Italians and the Spanish made chairs with cross-framed legs, joined by wooden stretchers that rested on the floor. A wooden back made the chair more rigid. Dealers in antiquities in the 19th-century called them "Savonarola Chairs." 

By the 1860s, the original curule chair form changed once again. Although some chair makers continued to use the cross-legged design, others modified it so that the legs splayed outward from a rectangular seat while the back had upright spindles and low-relief carving.

Hartwig & Kemper was a well-known furniture manufacturing company in Baltimore, with an office and salesroom at 316-318 W. Pratt Street and a factory at 309-331 W. King Street. The company also had numerous warehouses in the city and stocked a wide variety of furniture, especially chairs and tables, most of which they made of golden oak. Their 1904-05 catalog featured over 300 different pieces of furniture, mostly chairs, settees, couches, and tables. But they were mostly known for their chairs, which they produced in every style and type imaginable.

Your chair, however, was an earlier model made of tiger oak, a variation of golden oak that was dark-stained to look like mahogany. It features the stylized heads of two lions, with their mouths wide open to facilitate lifting the chair, on the top of the back. Your chair is called an elbow chair, presumably because a person could rest their elbows on the arms.

Furniture manufacturers like Hartwig and Kemper interpreted the prevailing furniture styles following the Civil War in homely, machine-made versions as well as more luxurious models.

Victorian furniture offered a mix of styles, almost all revivals of former styles. The Renaissance Revival style, one of four major Victorian revival styles, included such substyles as neoclassic Roman and Greek Revival. The word Renaissance in this case covered just about everything. The result was a stylized mix of many ancient and classic styles.

The end of the Civil War saw an immense trade in relatively inexpensive furniture to meet the demand of the market. Steam-powered machines simplified the manufacture of inexpensive furniture for the mass market. Furniture produced had simple lines, relatively flat surfaces, and a minimum of detailed carving.

Although factories in New York, Massachusetts, and Pennsylvania produced the greatest amount of furniture of all types. All made stock-in-trade furniture for the mass market. Golden or “antique” oak was the wood of choice. Some furniture companies just made chairs—straight-back chairs, dining chairs, rocking chairs.

Equipment they used was efficient enough that one reviewer said they could almost throw whole trees into the hopper and grind out chairs ready for use. However, early machines didn’t do such a great job with the finishing work. Any chairs with even a little carving had to be hand finished, a job entrusted to craftsmen brought from Europe. Sometimes, factory owners would use women and children to cover chair seats for very low wages.

The buying public at the time seriously considered price as well as style and comfort. By the end of the 1860s, Hartwig and Kemper were turning out large quantities of furniture, especially chairs.

The Other Arts and Crafts Designer

QUESTION: I have a Mission chair that has been in my family for decades. I never paid much attention to it. But recently when I was cleaning it, I turned it over and noticed a label under the arm of the chair which reads, "Limberts Arts and Crafts Furniture/Trademark/Made in Grand Rapids and Holland.” I know that Grand Rapids is in Michigan, but did this company also make furniture in the Netherlands? And just who is Limbert?

ANSWER: Charles Limbert made what you call “Mission” furniture in Grand Rapids and Holland, Michigan. In fact, his furniture wasn’t constructed in the Mission Oak style, which actually was a style of Arts and Crafts furniture that developed just before the turn-of-the-20th century.  This wasn’t as much of a style as what manufacturers called furniture made of oak that featured simple horizontal and vertical lines and flat panels that accentuate the grain of the wood. It was supposed to emulate furniture of the Spanish missions in California and Texas. What Charles Limbert made was furniture in the pure Arts and Crafts style.

The Arts and Crafts Movement in America originated in mid-19th-century England where the teachings of John Ruskin and William Morris popularized social reform. The movement began as a revolt against the Industrial Revolution and the dehumanization of the workers being replaced by machines. Americans learned about this movement through Gustav Stickley's magazine The Craftsman. Hand craftsmanship and a return to simplicity became hallmarks of the movement. These ideals applied not only to the lifestyle of the follower, but also to furniture and accessories in the home.

Hailed as the beginning of Modernism in the United States, Arts and Crafts interiors were in direct contrast to the preceding Victorian period of ornate decorative arts. Rectilinear forms of quartersawn oak replaced ornately carved rosewood and mahogany Victorian furniture. Mortise and tenon joints, butterfly keys, and the grain of the wood, itself, became the ornamentation on Arts and Crafts pieces.

While Gustav Stickley is best known as the leader of Arts and Crafts Movement in America, other designers also achieved recognition for their contribution to Arts and Crafts design. One of them was Charles Limbert. His company produced high quality Arts and Crafts furniture, but didn’t attempt to influence consumers about the idealized harmony of the Arts and Crafts lifestyle.

In the early 1880s, Charles Linbert began his furniture manufacturing career at the John A. Colby and Co.. in Chicago. He learned all sides of the furniture business— design, production, and marketing. An 1889 partnership with Philip Klingman established the Limbert and Klingman Chair in Grand Rapids, Michigan. Limbert and Klingman manufactured period reproduction chairs for only two years. In 1894, Limbert formed the C.P. Limbert and Company to produce Arts and Crafts furniture.

By 1906, the company had grown and moved to Holland, Michigan. Limbert called his line of furniture "Holland Dutch Arts and Crafts," most likely in reference to the local Dutch population.

Limbert's early furniture shows influences ranging from Japanese to Gothic. Some of his early china cabinets and bookcases have doors with stained glass in an Art Nouveau style.

His peak of design achievement came during 1904 to 1906 when he introduced many of his cut-out designs. Many of his de-signs were internationally inspired by the Vienna Secessionist School and designers such as Scotsman Charles Rennie Mackintosh and Austrian Josef Hoffmann. Limbert employed designers such as Hungarian architect Paul Horti and father and son Austrian designers, Louis and William J. Gohlke.

Limbert promoted his furniture as being "essentially the result of hand labor, with machinery being used where it can be employed to the advantage of the finished article." Like Stickley, he didn’t let machinery control production and emphasized the contribution of skilled craftsmen in his furniture promotions.

He constructed his furniture of quartersawn white oak, with well-executed doweled joints, keyed tenons and splined tabletops. Long, tapering corbels under arms characterize Limbert chairs. Unfortunately, Limbert didn’t extend his wood working quality to the hardware used on his pieces, most of which came from the Grand Rapids Brass Company.

Compared with Stickley's work, Limbert's designs were typically less severe and more visually interesting, usually achieved through the use of cut-outs and other elements inspired by the as English Arts and Crafts Movement and Dutch folk furniture.

His pieces were among the original furnishings of the Old Faithful Inn in Yellowstone National Park. Today, several wash stands remain in the Old House section of the Inn.