A Pitcher Full of Beauty

QUESTION: I’m trying to learn more about a pitcher that I have. Through Internet research, I h/ave learned the story of Paul & Virginia, the decorative relief on the pitcher, but I’m trying to identify when and where my piece was made. The only marking on the bottom is a hand inscribed “BS.” Can you tell me anything about it?

ANSWER: You have what’s known as a Parian ware pitcher, most likely made after 1850 in the United States. While pottery factories produced thousands of Parian pieces, most of them were sculptures. However, here in the U.S., pitchers like this gained popular use as water pitchers.

English potters developed the formula for Parian ware porcelain in the 1840s, at the start of the Industrial Revolution. With the advent of steam power, it became possible to produce molds with which to make duplicate copies of ceramic products. Named after the Parian marble quarried in Greece that its originators intended to replicate using the same ingredients as porcelain—white china clay, feldspar, kaolin, and flint, Parian became popular with middle and upper middle class Victorian women who desired to own the marble statuary and china of the upper classes but couldn’t afford them. That’s where Parian came in. It filled this need at an affordable price.

Because Parian had a higher proportion of feldspar than porcelain, makers fired it at a lower temperature. The increased amount of feldspar caused the finished body to be more highly vitrified, thus possessing an ivory color and having a marble-like texture that’s smoother than that of biscuit, or unglazed, porcelain. Potters either made relief ornamentation by hand or in a mold. They left most Parian in its natural, creamy white state, but applied background colors, usually shades of blue, to contrast with the relief motifs.

Since the matte surface of Parian ware attracted dirt, which was difficult to remove, makers protected  much of the Parian made here and abroad with a smear glaze, which they achieved by adding chemicals to the kiln in much the same way that they would add salt to a kiln of stoneware. The matt or satin sheen of the smear glaze also preserved the Parian’s crisply molded details, which would have blurred under a glossy glaze finish. However, potters fully glazed the interiors of vases and pitchers intended to hold liquids.

In its Victorian heyday, potteries produced hundreds of thousands of pieces of Parian ware annually. Though it soon went out of popularity in England, American firms, notably one run by Christopher Fenton, which produced Parian from 1847 to 1849 as Fenton Works of Bennington, Vermont, and then from 1849 to 1858 as the United States Pottery Company, began making all sorts of items, but especially water pitchers. These potteries produced Parian ware using British manufacturing techniques brought over to America by English potters. Fenton’s companies made  at least 16 different pitchers.

Christopher Webber Fenton and his brother-in-law Julius Norton first made Parian in America at their pottery in Bennington, Vermont. Bennington had been a center for the production of utilitarian salt-glazed stoneware since the early part of the century. After Norton left the company in 1849, Fenton used the mark "Fenton's Works; Bennington, Vermont." When he acquired a new partner, a local businessman named Alanson Potter Lyman, also in 1849, Fenton changed the factory's name to the United States Pottery Company.

Daniel Greatbach, a Staffordshire potter who arrived in Bennington after beginning his American career in Jersey City, New Jersey, did much of the firm’s designing. Consistent with English counterparts of the mid-1840s through the 1850s, relief molding on Bennington pitchers usually consisted of the naturalistically rendered plant forms of the Rococo-revival style. Unfortunately, the factory closed in the Spring of 1858 due to the high cost of labor, the high losses by breakage, and the rough competition posed by cheaper imported articles. 

While the English potters marked their pieces, the Bennington firm for the most part did not, leaving nearly 80 percent unmarked which makes identifying Bennington pieces difficult without expert assistance. There’s a misconception that any unmarked Parian pieces from New England had to have been made by the United States Potter Company of Bennington. This myth seems to have originated in the 1920s with Dr. Charles Green, a New York physician and ceramics enthusiast, who amassed a large collection of Parian trinket boxes and vases during his antiquing forays throughout New England. Without knowledge of imported English ceramics into New England, he reasoned that anything found there must have been manufactured there. Since the Bennington pottery was known to have made some Parian, Green reasoned that all his unmarked Parian must have been made there as well. 

"Fenton's Works/Bennington,/Vermont," the mark used by Fenton’s Bennington firm,  clearly identifies the pitchers made prior to 1853, the year in which the pottery changed its name to the United States Pottery Company. The earlier of the two is a raised or applied mark impressed "UNITED STATES/ POTTERY CO./ BENNINGTON, VT.," which appears on four of their pitcher patterns–Cascade, Climbing Ivy, Tulip and Sunflower, and Paul and Virginia. A raised ribbon mark with the initials "U.S.P." was the last mark used on Parian by this firm. The ribbon also features two numbers denoting the pattern number and the capacity of the pitcher.

Victorians liked pitchers and vases of various sizes and shapes, including those shaped like hands holding receptacles for flowers or ears of corn or shells. Some had white relief decoration of grapes and vines, oak leaves, or climbing roses against a blue stippled background while others had relief illustrations from a novel called Paul & Virginia.

Jacques-Henri Bernardin de St. Pierre wrote the story of Paul and Virginia and first published it in 1788. The novel of naive love became an instant world-wide best seller, captivating audiences with the tale of two youngsters who grow up on a paradise island according to nature's law. In adolescence, the pair fall in love, but a shipwreck leads to their untimely deaths.

It’s a known fact that English immigrant potters brought with them a supply of English plaster casts and design molds to use in America. A pitcher can resemble an English one so closely as to suggest that it was cast in a mold made from the original piece. Therefore, it can be extremely hard for a beginning collector to tell the difference between unmarked English and American Parian ware.

Though Bennington Parian is considered the best Parian produced in America, other factories in Cincinnati, New York City, and Baltimore had begun production by the 1870s. So this pitcher could have been produced by one of those potteries.  Similar pitchers are selling for as much as $365 online.

Ugly Ducklings

QUESTION:  I inherited a couch with a matching chair from my grandparents. I have tried to do research online, but the multitude of antique items is overwhelming. This set appears to resemble the Chippendale style, but not exactly from what I have seen. My grandmother said the set was already over 100 years old when she purchased it in the 1960's to 1970's. I’m trying to gain knowledge about these pieces. Can you help me?

ANSWER: Sorry to say, but someone gave your grandmother misinformation about her living room set. It’s not uncommon for dealers in used furniture to do this because they really don’t know how old the pieces they’re selling are and just want to sell them.

This couch and chair date from the 1920s or 1930s. They’re a great example of pseudo styles that manufacturers created to fill the need in the early to mid-20th century middle and working class markets. At that time, most people were looking forward and didn’t want “old” furniture in their homes. To buy all new furniture was a big deal, especially during the Great Depression. It was a way people impressed their friends and neighbors. If you could afford to buy new furniture, you were definitely going places. So manufacturers produced some truly ugly, ostentatious pieces to fill this need.

There were truly only four officially recognized furniture styles during the early 20th century.  The first was Art Nouveau, a style based on a movement that began in Paris in the late 19th century and lasted into the 1920s. Designers of the time developed this furniture as a revolt to the styles of Victorian times. Heavily influenced by natural forms, it featured stylized images of grasses, irises, snakes, dragonflies, and a myriad of other animal and plant forms.

Another style, Arts and Crafts, or Mission as it became known in America, was a style, originally developed in England, that defied the overly decorative and mass produced pieces of the latter part of the 19th century. Designers went back to the simpler times before the advent of the steam engine when cabinetmakers made furniture by hand. The Mission style became a direct result of the American Arts and Crafts Movement led by such designers as Gustav Stickley.

In 1925, an exposition in Paris showcased modern designs in furniture, jewelry, and architecture. An offshoot of this exposition was the birth of the Art Deco style in which furniture makers employed stainless steel, aluminum, and inlaid woods to fashion sleek, ultra modern pieces with bold geometric patterns and abstract forms.

The roots of the fourth style, Modernism or Arte Moderne, grew out of pre-World War II industrialism. As an outgrowth of Art Deco, this furniture style used little or no ornamentation and a function over form concept. Influenced by Scandinavian, Japanese, and Italian designs, it featured industrial materials such as steel and plastic.

What all of the above styles had in common was that they were mostly produced for those that could afford them. Newly wealthy industrialists, bankers, and merchants wanted furniture that was in fashion and were willing to pay great sums for it. However, the common person couldn’t afford such luxuries and ended up with mass-produced pieces that didn’t cater to any taste in design.

What ordinary people wanted was their own form of luxury—comfortable couches and chairs that they could fall asleep in after a hard days work but that would also impress guests. They wanted just enough decoration to make the pieces seem elegant but not so much as to make them hard to care for. These needs resulted in overstuffed chairs and sofas with springs in their cushions to give added comfort, extremely stylized shallow carving that was easy to clean, and generally little decorative woodwork since using more added to the cost of the piece. Manufacturers could use cheap woods to build the frames which they then covered with upholstery.

Unfortunately, while a few pieces of furniture from this period have some charm, most do not and no amount of restoration or reupholstery will transform these ugly ducklings into beautiful swans.

The Ultimate in Elegance

QUESTION: What can you tell me about this plate? Is it collectible or ready for the dumpster.

ANSWER: If I were dumpster diving, I certainly would take a tumble for your plate. What you have is an authentic, hand-painted plate made in Limoges, France.

French Limoges is the name of delicate porcelain ware made in the Limousin region of France since the 18th century. It includes dinnerware, centerpieces, and the distinctive porcelain snuff and pill boxes that have become valuable collectors' items. The town of Limoges contains numerous factories that produced these wares, and, in fact, still do. The kaolin found in the rich soil in this French region is the vital element in the mix that makes up Limoges porcelain paste and gives it its delicate character.

Your particular type of plate, depending on its size, could be a case plate or a charger. Victorians loved to collect things and during the late 19th century, decorative display cases placed in the dining room, later to be commonly known as “china closets,” held various porcelain wares. Small hand-painted plates, usually from 7-8 inches in diameter, became a popular item to display in these cases. Housewives also displayed their best china in these cases.

Chargers, on the other hand, are larger decorative plates that a hostess would put at each place setting. Servants would take these away and replace them with plates of food. In French dining service, there should always be a plate in front of the person dining, whether full or not. So between each course, the serve would set the charger in front of the guest or family member.

Your plate has all the marks of authentic Limoges china. The McKinley Tariff Law went into effect in 1891, so all imported goods after that time had to be marked with the name of the country of origin. All Limoges items lacking the word "France" were made before 1891.

First, it has the maker's mark (partially obscured) in green on the bottom of the piece. This identifies the specific factory in Limoges that cast and fired your plate. This mark was impressed into the porcelain under the glaze at the point when the porcelain was still blank or "whiteware." Sometimes the mark just says "Limoges France," but in this case it seems to bear the name of Magnac-Bourg Limoges. Some marks incorporate a symbol such as a bird or a butterfly, but in this case it’s star with the word “Limoges” set into it.

The decorator's mark appears on the front of the plate. It seems to read “F. Faure.” While one of the presidents of France was named Felix Faure, there isn’t any evidence that he was a lowly plate decorator before winning that high office. The signature in this case is handwritten. Many Limoges pieces say "Peint Main," which stood for hand painted, on the back.

The mark on the back of your plate that is the clearest is that of the importer. In this case LS &S stands for Lazarus Strauss & Sons of New York, founded in 1869. The company imported chinaware from various countries in Europe, including Britain, France, and Germany and Czechoslovakia. In 1874, his son Nathan, got RH Macy to permitted them to have a glass and chinaware department in their store, making LS & S wares the first china and glassware to be sold by Macy’s. And while LS & S imported china, they also operated factories in the leading china making centers in the above countries.

Today, case plates and chargers made in Limoges, France, sell for $25 and up, depending on their age. Sets of 6 sell for much more.

The All-American Music Box

QUESTION: I have a Gem Roller Organ that has been in my family for some time.  It spent the last few years in a closet high up on a shelf.  The bellows are in working order and the keys respond to the pins but it has stopped playing.  What can you tell me about it? Also, can it be repaired?

ANSWER: You’ve got one of the original Gem Roller Organs produced by the Autophone Company of Ithaca, New York.  Since it’s intact and in relatively good condition, it most likely needs cleaning, which you should have done by a professional who works on music boxes and gramophones.

In the late 1880's, the Autophone Company began making hand-cranked roller reed organs which operated by forcing air out through the reeds under pressure with exposed bellows. They named their most common and least expensive one “The Gem Roller Organ,” producing tens of thousands in a single year. Some time later, the company began producing a a more efficient vacuum-operated model, calling it simply the "Gem Roller Organ."

Earlier models, like the one pictured above, were pressure operated which forced air out through the reeds. This was changed early on in production to the more efficient vacuum system which became the standard for the majority of American made organette's.

Because of its relative simplicity, the company was able to keep the cost of its roller organ affordable. Sears & Roebuck, in their 1902 Catalog, offered the Gem Roller Organ for as low as $3.25, including three rollers. Contracting with Autophone to produce large quantities of these devices enabled Sears to sell in volume and keep its price low.

The Gem Roller Organ, available in either a painted black or walnut-like finish with gold stenciled applied designs, used teeth or pins embedded into a 20-note wooden roller, similar to the cylinders used in Swiss music boxes. Pins operated on valve keys while a gear turned the roller. The mass-produced 20-note rollers, priced as low as 18 cents each—and according to the Sears Catalog, less than the price of a traditional sheet of music—played a wide range of tunes, from classical to sacred to ethnic and popular tunes. The 1902 Sears Catalog listed 220 different rollers of the over 1,200 different titles then available.

The tone of a roller organ was similar to a cabinet parlor organ of the time. At 16 inches long, 14 inches wide and 9 inches high, the Gem Roller Organ was small and light enough to place on a parlor table.
The Autophone Co. used native woods for their construction, and the wood finishes on their early machines may be quite beautiful.

Since Autofphone usually printed the manufacturing date on the bottom of the case, it’s relatively easy to date the device, itself. All rollers show a copyright date of July 14, 1885, even though the Autophone sold them from the late 1880's through the late 1920's—an amazing lifespan for a single basic design. Their success may be attributed to the full, rich sound and pleasing music arrangements offered on the rollers.

Unfortunately, roller organs quickly fell out of favor after the introduction of the phonograph around the turn of the 20th century even though they cost much less than disk or cylinder music boxes manufactured during the same period. Considered the common-mans form of entertainment since music boxes and other instruments were much more expensive, roller organs could be found in many middle class homes..Most eventually ended up in the attic, in the barn, or simply thrown away, but thanks to their nostalgic music, collectors are once again interested in them.

Today, roller organs sell for anywhere from $120 to over $800, depending on the condition and the number of rollers included.

A Taste for Eastlake

QUESTION: I recently discovered two chairs and a settee at my grandmother’s house. Unfortunately, there are no markings of any kind as she apparently planned to refinish them and sanded everything off! What can you tell me about them? After hours and hours of searching on Google, the best I could come up with is that they're possibly Victorian.

ANSWER: You’re half way there as far as your chairs and settee are concerned. Yes, they are Victorian—Eastlake Victorian, as a matter of fact. This style was popular from 1870 to 1885 and is one of seven different furniture styles popular during the Victorian Age.

Charles Locke Eastlake, an English critic of taste, did more to affect a change in American taste in the late 19th Century than anyone before or since. More than any other individual, he was responsible for introducing the principles of the English design reform movement to the American public.

Eastlake considered simplicity the key to beauty. He thought the objects in people's homes should be attractive and well made by workers who took pride in their work. He published a book, Hints on Household Taste in Furniture, Upholstery and Other Details, a runaway bestseller from 1870 and 1890. The book became the decorating bible for upper middle class American housewives.

Though Eastlake included some of his own sketches among the illustrations of well-designed furniture chosen for his book, he was primarily a critic of taste, not a furniture designer. The furniture illustrated in Hints had ornamental features including shallow carving, marquetry, incised or pierced geometric designs, rows of turned spindles, chamfered edges, brass strap hinges, bail handles, and keyhole hardware inspired by Gothic forms. Every decorative device, according to Eastlake, also had to fulfill a useful function.

To relieve the simplicity of rectilinear forms, Eastlake advised using turned legs or spindle supports. When a homeowner desired an "effect of richness,” he suggested restrained, conventionalized carving, inlay, and sometimes even veneer. Ornament, he felt, should be stylized rather than naturalistic, for it’s "this difference between artistic abstraction and pseudo-realism which separates good and noble design from that which is commonplace and bad." A functionalist, Eastlake cautioned that carved decoration should always be shallow and never "inconveniently" located, as were the "knotted lumps" of grapes or roses decorating rococo-revival chairs that often stabbed the sitter between his or her shoulder blades. His book further suggested that furniture be made of such solid, strongly grained woods as oak, walnut, or mahogany. He preferred oil-rubbed finishes to "French-polished" ones, and varnish was taboo.

By 1876, homeowners of the nation's most elegant homes decorated them in subdued "artistic" tones, set off by rectilinear furniture of rich bird's eye maple or elegantly ebonized cherry wood. Critics broadly categorized the new designs as "art furniture," but also called them "modern Gothic," "Queen Anne Revival," or "Eastlake" in honor of the man who brought a sense of taste to America.

To the modern eye, such furniture with its intricately stylized marquetry, gilded incised designs, spindled galleries, inset tiles, richly grained woods, and decorative turned elements hardly seems "simple." But in contrast to the heavily carved furniture of preceding decades, embellished with naturalistic roses and bunches of grapes imposed on the elaborate rococo shapes that we now regard as the embodiment of Victorian design, Eastlake-inspired furniture was remarkably functional and clean-lined.

The Eastlake style was quickly taken up by the manufacturers of cheaper furniture, who until then had given very little attention to artistic form. The furniture produced in these factories ranged from excellent to shoddy, depending on the grade of lumber used, how well it was seasoned in the drying kilns appended to the larger factories, and upon the skill of each machine operator throughout the manufacturing process. At its worst, factory furniture was poorly designed and rickety. However, there was a middle range of
moderately priced but well-constructed factory furniture produced in the Midwest for wholesale shipment to Eastern retail outlets. These chairs and settee fit into this group.

Eastlake-style furniture often featured tables and chests with marble tops, some the traditional white, others in rich Italian pinks and browns. Tables and chairs had aprons and legs incised with horizontal or vertical lines called reeding and chamfered corners. Round legs on chairs also featured ring-like annulets. Quatrefoils were another popular addition, since flat cutouts often graced the more elegant pieces. Lastly, acanthus-leaf designs could be found incised into even the cheapest versions.

Pieces of furniture in this style had low relief carvings, moldings, incised lines, geometric ornaments, and flat surfaces that were easy to keep clean. Also called Cottage Furniture, the mass-produced pieces were much more affordable than the fancy revival pieces. Unfortunately, while Eastlake-style furniture may have looked refined, most chairs and sofas weren’t very comfortable and were meant to be used in formal parlors for guests only.

The Vintage Trap

QUESTION: I recently purchased a vintage formal living room set for a steal of a price and am looking to learn more about it. What can you tell me?

ANSWER: Depending on how much you paid, the question is who got taken, the dealer or you. I suspect it was you. While this is a very well-built living room set, it’s really not very old—most likely from the 1940s or 1950s, but could be as old as the 1920s.

Furniture of this sort falls into the category of what used to be known as “period” furniture. Many people in their 60s grew up with such furniture. Their mothers warned them about not putting their feet on the couch or sleeping in the chairs. Generally, manufacturers overstuffed these pieces so they would be more comfortable. They provided thick blocked cushions so that anyone sitting in them would sink into them. Your set happens to be styled after French “Louis” pieces of the Rococo period. But that’s where the similarity ends.

People like yourself often fall into the “vintage” trap. The word vintage originally applied to wine making
and the process of picking grapes and creating the finished wine. A vintage wine is one made from grapes that were all, or primarily, grown and harvested in a single specified year. In certain wines, it can denote quality.

The people who sell on eBay and other auction sites saw that word “quality” and figured why not use the word “vintage” to describe their pieces and make them more attractive to bidders. In this case, vintage means referring to something from the past of high quality. Let’s face it folks, anything from yesterday—the day before today—is from the past and if it’s of good quality, then it technically can be labeled vintage. When the buyers on the auction sites saw the word quality, they perceived vintage to mean something old that has lots of value. Unfortunately, that doesn’t always apply.

Online sellers throw the word vintage around like it’s a catchall word that will instantly add credibility and perceived value to the items they’re selling. You’ll see vintage jewelry instead of estate jewelry, vintage furniture instead of used furniture, and vintage kitchenware instead of used kitchen utensils. It’s all in the wording.

Unfortunately, middle and lower-market antique and flea market dealers have picked up on the use of vintage to describe goods for which they don’t know the age. Since using the word online has become rather successful—you can full a lot of people a lot of the time, to paraphrase an old saying—they figured they might as well try it.

Don’t fall into the vintage trap. Find out about a piece before you buy it. In the end, you’ll make an informed decision and just might get something of real value for a steal.

Lighting the Way to Safety

QUESTION: I got this old lantern about 25 years ago. Supposedly it was in the railroad terminal in Atlanta when the Yankees came through and wrecked it in 1865 and was taken home by a young boy who put it in the family barn. It stayed there until I got it from a guy who owed me some money. He says it belonged to his great grandfather, the young boy who originally found it. I have no idea of its value or even its age and have been looking at it for 25 years. Is there any way you can tell me about how old this lantern is and even if it is possible that the story he told me is true?

ANSWER: Your lantern would have been used by railroad workers to indicate to railroad engineers whether a switch was open (green) or closed (red). However, Adlake, the manufacturer of your lantern, didn’t start making switching lanterns until the late 19th century, so it seems unlikely that the Civil War tale is true. Your lantern looks like Adlake Model #1204 which the company produced at the turn of the 20th century.

In order to safely operate a train yard, railroad workers had to have a way of communicating with each other and train engineers. During the days of steam locomotives, the noise and distance involved with train operations ruled out speaking or yelling, especially since common radio devices weren't yet available. Any device they used would also have had to be portable, since those working on the line were constantly on the move. While flags and semaphores worked during the day, they weren’t effective at night. In order to communicate after dark, railroad workers depended on kerosene lanterns.

During the Civil War, improvements to the rail transportation system made it practical to ship lanterns from state to state. It was also during the war that makers began using metal stamping machines to draw and press metal, making the lantern manufacturing process more efficient..

The first company to make kerosene lanterns was the R. E. Dietz Company. In 1856, kerosene began to be distilled in quantity from coal, giving Robert Dietz the opportunity to apply for and receive a patent for a kerosene burner.

During the 1860s, Civil War contracts, Dietz’s hard work, the growth of railroads, and westward expansion made his lamp business a huge success.

On October 21, 1874, John Adams, a salesman from New York, and William Westlake, a tinsmith who invented the removable globe lantern, joined their two companies to create the Adams and Westlake Company, commonly known as Adlake, located in Chicago, Illinois. The new company became the most successful railroad lantern company ever. Even though it made standard railroad lanterns as early as 1857, it didn’t begin to manufacture switching lanterns until the 1890s. Adlake Manufacturing moved from Chicago to Elkhart, Indiana, in 1927. It was the last of many companies to manufacture kerosene railroad lanterns and ended up absorbing its competition in the 1960s as lantern sales plummeted . Today, it makes lanterns for display and train show use.

Generally, the oldest version of Adlake lanterns on the antiques market today are those known as "The Adams." The company produced them from the 1890s through around 1913 when its replacement, the "Reliable" model, came on the market. All of Adlakes lanterns were extremely heavy duty and well made. Today, Adlake switching lanterns in excellent condition sell for $100-300 on eBay.

Those Happy Days

QUESTION: My mother had a cabinet full of Melmac dishes in a variety of pastel colors. We used them for every meal. Now I have them and while most have seem better days, they bring back fond memories of my childhood. What can you tell me about them? Are they collectible?

ANSWER: Your Melmac dishes are certainly collectible, as hundreds of collectors of the plastic ware can attest. The most collectible pieces are from the 1950s when items such as this signaled the dawn of future of ease for American housewives.

Everyone knows of “Happy Days,” the 1950s-era T.V. sit com, featuring a typical middle class family. The mother on that show, much like scores of other American housewives of the period, must have thought she had died and gone to housewares heaven with the advent of Melmac dinnerware. That was just one of the items that made her days truly happy because its durability made it ideal to use in homes with children.

Initially discovered by William F. Talbot in the 1940s, Melmac, the name given for the hard plastic melamine resin by its chief maker American Cyanimid Corporation, was first used in the military.
Dishes made of early plastics and Bakelite did not hold up well or withstand regular washings or heat, but American Cyanimid showed that its new "improved plastic" could indeed hold up well. While the company produced the resin, itself, it sold it to other manufacturers which molded it into dinnerware lines for both home and restaurant use.

The Plastics Manufacturing Company of Dallas, Texas, produced Texas Ware, Dallas Ware, Oblique, SRO and Elan. The Boonton Molding Company of Boonton, New Jersey, offered Boontonware, Patrician and Somerset. International Molded Products in Cleveland, Ohio, produced Brookpark/Arrowhead Modern Design and Desert Flower lines designed by Joan Luntz. And the Prophylactic Brush Company of Florence, Massachusetts, made Prolon. Its Florence and Beverly lines were the most popular for home use.

During the late 1950s and 1960s Melmac dinnerware found its way into just about every American home. However, the tendency of melamine cups and plates to stain and scratch led sales to decline in the late 1960s, and eventually it became largely limited to the camping and nursery markets.

Melmac is used for just about any type of dinnerware, including plates, cups and saucers, serving pieces, and glasses. Manufacturers could add any type of color pigment to the resin during the molding process. As a result, they created it in a variety of colors and patterns. Muted colors, such as pea green and seafoam appeared in the late 1950’s, and during the late 1960s, makers experimented with interesting color combinations to complement the psychedelic look of the time.

Today, you’ll find vintage Melmac in thrift stores, at estate sales, online auction sites, and garage sales. It's fun to collect it and due to it's long production, it’s easy to make a whole set. Some Melmac pieces are worth more in value than others. Full sets in pinks or blues are generally priced higher. Though you may have a problem finding full sets, you can start collecting it inexpensively by piecing sets together. 

The Sweet Smell of Success

QUESTION: My grandmother has what she calls a “Larkin” desk. It doesn’t look like a normal desk but more like a tall oak bookshelf with a drop-down writing surface. She remembers her parents acquiring it around 1911.  Can you tell me more about it?

ANSWER: One of the most popular items from the Larkin Company was the drop-front combination bookcase/desk, also known as the Chautauqua desk. This desk became a common piece in homes at the beginning of the 20th Century.

In 1875, John D. Larkin opened a soap factory in Buffalo, New York, where he made two products— a yellow laundry soap he marketed as Sweet Home Soap and a toilet soap he called Crème Oatmeal. He sold both products using wholesalers and retailers. Larking originally sold his Sweet Home Soap to street vendors, who in turn sold it to customers along their routes. By 1878, he had expanded his product line to nine types of soap products.

His brother-in-law, Elbert Hubbard, the eventual founder of the Roycroft Arts and Crafts Community, came up with what he called "The Larkin Idea"—door-to-door sales to private residences. To establish brand identity, Hubbard, inserted a color picture with the company's logo into every box of soap as an incentive for customers to buy more soap. Housewives accumulated and traded these picture cards, and eventually the cards became more elaborate. This concept of offering a gift directly to customers was a new approach to marketing. And by the 1890's, Larkin’s premiums had become an overwhelming success and a vital part of the company’s   marketing plan.

The premiums Larkin offered included handkerchiefs with toilet soap, towels with soap powder, or one-cent coins. Eventually, Larkin inserted certificates into the packaged products which could be redeemed by mail at the company’s Buffalo headquarters. A $10 order of soap resulted in the awarding of a premium with a retail value of the same $10. By 1891 he placed his first wholesale order of items to be given as premiums, $40,000 worth of piano lamps. The next year he acquired 80,000 Morris chairs and 100,000 oak dining chairs—all to be given away with the purchase of soap.

Larkin and Hubbard knew the key to mass merchandising was to eliminate the sales force and sell directly to the consumer via direct-mail catalog. Larkin realized he would be better off if he made not only the products he sold, but also the premiums he distributed. His pitch was that since he manufactured the products he sold, unlike Sears & Roebuck and Montgomery Ward and sold them directly to the consumer, he was eliminating the "middleman" and giving the customer better value for the money. The Larkin Company motto became "Factory to Family." By the end of the 19th century, catalogs jammed people’s mailboxes.

The plan worked. Both his product line and his premium line expanded. By 1893, the Larkin Soap Manufacturing Company was sending semiannual catalogs to 1.5 million customers.

His first venture was the furniture assembly plant in Buffalo that made furniture from parts cut and milled in Tennessee. Here for the first time was a major catalog distributor who actually made the furniture they shipped. Furniture was one of the company’s primary premiums. Since Larkin was appealing to the mass market, he made sure to offer furniture premiums that appealed to ordinary people and not the wealthy.

His most famous premium was his oak drop-front desk with open bottom storage, first appearing in the 1901 catalog, that the company gave as a premium for a $10 purchase of soap. Constructed of either cold or quarter sewn oak plank, assembled with nail and glue construction, with a golden finish, each desk featured applied ash or maple molding and trim and back panels of three-layer plywood. Better desks also had stamped-brass escutcheons and brass hinges on the drop panel. Cheaper ones had iron-butt hinges. A somewhat oval French beveled mirror finished off each piece. Variations included a glass front case with a drop-front desk attached to the side, two glass front cases with a desk in the middle, or simply a drop-front desk with a small open bookcase below the drop and candle stands above it, with a mirror in the high splashboard. This small desk reflected the taste and style of the Golden Oak period of American furniture in a form modest enough fit into any middle-class home.

This type of desk became "Everyman's" desk and was a common item in most homes of the period. It became a trendy decorating item and remained so for many years. People began to associate Larkin's name to the form, even though his wasn’t the only company to manufacture them, and so evolved what has become known as the "Larkin Desk." Today, Larkin desks sell on eBay for around $400 and sometimes higher.

John Larkin and Elbert Hubbard not only provided the means for a growing American population to stay clean at a reasonable cost, but they also helped them furnish their homes for free.

A Stitch in Time

QUESTION: My great-grandmother used this piece of furniture as a sewing cabinet.  I’m interested in its age and use. The drawers have spaces for wooden slats—one side a round hole and the other side of the drawer has a slot. The side compartments are finished inside and may have been used to store fabric. What can you tell me about this piece?

ANSWER: You, indeed, have a sewing cabinet, a Martha Washington sewing cabinet to be exact. And while it takes Martha’s name, it isn’t much like the one Martha, herself, used. Her original sewing cabinet was a small work table with an open shelf space in the middle with no drawers set between two storage compartments. A fabric skirt, draping to the floor, shielded the shelves. Your cabinet is a Depression era reproduction of a table made in 1815. However, Martha Washington died in 1802.

Today, Martha Washington sewing cabinets generally have two or more drawers in the center flanked by half round compartments on each side of the cabinet that are covered by a shaped lid attached by concealed hinges. These side compartments, called project pockets, held fabric, needlepoint or knitting projects in progress, plus they were long enough to hold knitting needles.

These handsome little cabinets came in many similar designs. Some had nicely turned legs while others had plain ones. Matching wooden or glass knobs adorned the drawers, which, themselves, often varied in size and depth. Often the top drawer contained a removable thread holder. Makers produced them from the early to the mid-19th century in walnut or mahogany. Some came with drawer inserts and other didn’t.  Made to fulfill a practical purpose, they became popular with women who liked their small size and maximum storage ability.

The versions of this cabinet that mostly appear on the market today have three drawers and two flat top lids, which incorporated the "Soss" type invisible hinge, patented in November 1911, over the material compartments. The drawers can be either three different descending sizes, the smallest on top, or three of the same size. While thread holders appear in some, they’re not in all. Generally, they measure 27 inches wide, 14 deep, and 29 inches tall. In 1915, the Cowan Manufacturing Company of Toledo, Ohio, advertised their mahogany version for $12.50.

In the mid-1920s, furniture manufactures began making small, relatively inexpensive pieces such as magazine racks, tea carts, and smoking stands that people could afford to buy during the Great Depression. Known as the "novelty" furniture movement, it helped keep production going when customers could no longer afford to purchase dining room or bedroom sets.

The quality of the 20th-century Martha Washington sewing cabinets ranges from those made of solid mahogany to cheaper models made of fruit wood (apple or pear), finished to look like mahogany. The better ones in good condition sell for around $150-$165 and finer examples can sell for as much as $500.

Raise a Jug

QUESTION: I recently found a large character jug at a local flea market. The dealer said it was old, most likely from the late 19th century. How can I tell if it is indeed old or maybe just a reproduction?

ANSWER: There’s lots of confusion about character, or as they’re more commonly known, Toby jugs, inspired by the original Toby Jug, with its brown salt glaze, developed and popularized by Staffordshire potters in the 1760s. They got the idea from similar Delft ware jugs produced in the Netherlands.

The first Toby jugs, made in the form of a jovial, stout, man wearing a long coat and tri-corn hat of the late-18th-century, puffing on a pipe, and holding a jug of ale, became common pouring vessels at local taverns. The pitcher had a rear handle and a removable lid, and the tricorn hat formed a pouring spout. Most antique historians attribute the first one to attributed to either John Astbury or Thomas Wheildon.

There are two theories as to origin of the jugs’ name. Some believe the jovial, intoxicated character of Sir Toby Belch in Shakespeare's play, Twelfth Night, inspired it while others believe  a notorious 18th century Yorkshire drinker, Henry Elwes, also known as "Toby Fillpot" was the inspiration. Either way, the name stuck.

Well-known potters, such as Ralph Wood I and II, Enoch Wood, Thomas Hollins and William Pratt, followed Astbury and Wheildon lead and began making Toby jugs in Staffordshire and Leeds, England.

Most collectors equate Doulton Pottery with Toby jugs since John Doulton established his riverside pottery at Lambeth, south of London, in 1815. His company manufactured miles of sewer pipe and became the leader in the sanitation revolution of the time. Today, Doulton, now known as Royal Doulton, is famous for its plates, vases, and jugs, decorated with popular imagery from English history and literature.

While Royal Doulton made Toby jugs for the remainder of the 19th century, it wasn’t until 1901 that it introduced figures, series ware, and rack or case plates. Over time, these became highly collectible. In 1934, Charles Noke of Royal Doulton introduced the first modern character jug, John Barleycorn, a symbol of the brewers, followed by Old-Charley, Night Watchman, Sairey Gamp, the midwife and sick-nurse from Dickens' Martin Chuzzlewit, Parson Brown, the sporting cleric, and Dick Turpin, the highwayman. The character jug series features lifelike caricatures of the heads of famous historical personalities and legendary characters from folklore, literature, and popular culture. The difference between a Toby jug and a character jug is that the former features a full figure while the latter just the head and shoulders of the person.

On jugs made before 1960, a dark glaze bleeds over the rim and into the white glazed interior. But the best way to tell the age of a character jug is by its mark. Many of the older jugs have a capital "A" to the left of the "Lion and Crown — Royal Doulton - Made in England" stamp printed on jugs made from the 1930s to the 1950s. After the 1950s, Royal Doulton printed the mark in darker green and without the A.

Doulton jugs made in the 1930s show the name of the character in quotation marks. On those made in the 1950s, the letter “D’ precedes the name of the character without quotes, with the  copyright date lying underneath.

Those jugs marked with an “A” are actually less valuable because Royal Doulton, over time, flooded the market with them. However, character jugs introduced in the 1950s and discontinued in the 1960s, such as Johnny Appleseed, Simple Simon, Dick Whittington, Admiral Nelson, the Hatless Drake and Uncle Tom Cobbleigh, are more valuable than those marked with an “A.” Also, the company made its character jugs in five sizes, from small to large.

The smaller ones, marked Doulton Made in England in a circle with the name of the character in the center, cost $2 new and now sell for $100 to $300 each.  A complete set can sell for $1,500 to $2,000.  The larger ones sell for $100 to $500 each. And as with any collectible, there are exceptions.

By the late 20th century, over 200 different makers, including Royal Doulton, Shorter and Son, Lancaster-Sandland, Royal Worcester, and Wedgwood & Co. were producing Toby character jugs. However, as the 21st century dawned, their popularity waned and many stopped making them. Today, only three companies still produce Toby character jugs.

I Scream, You Scream...We All Scream for Ice Cream

QUESTION: I have an old pewter or white metal cylinder form which stands about 8 inches tall and has three parts: a decorative molded top in the shape of a bunch of fruit, a long tube center that’s ribbed on the inside, and a screw-on base that supposedly belonged to my great-grandmother. Can you tell me what it is?

ANSWER: What you have is what’s known as a banquet ice cream mold, topped by a sculpted bunch of fruit with leaves. This type of mold, made of pewter, dates from the early 1900's and would have been used for parties or holiday gatherings.

Ice cream is a frozen dessert usually made from dairy products, such as milk and cream, often combined with fruits or other flavors. It’s origins can be traced back to at least the 4th century B.C.E. when people living in the Persia (in today’s Iraq and Iran) would place snow in a bowl and pour grape juice concentrate over it, inventing what has come to be known as the snow cone.

During the first century A.D. , Roman Emperor Nero had ice brought from the mountains and topped it with fruit. But it wasn’t until the reign of China's King Tang in the 7th century that the idea of icy milk concoctions became popular, a idea that would ultimately become fashionable in European royal courts.

Arabs were perhaps the first to use milk as a major ingredient in the production of ice cream. They sweetened it with sugar rather than fruit juices, and came up with ways to produce it commercially. By the 10th century, ice cream had spread to Baghdad, Cairo, and Damascus. Makers used milk or cream, plus some yogurt, and flavored it with dried fruits and nuts.

Charles I of England so loved his "frozen snow" that he offered his ice cream maker a lifetime pension in return for keeping the formula secret. But it was the Quaker colonists who first introduced ice cream to America in 1772. During colonial times, confectioners sold ice cream at their shops in New York and other cities and some of the founding fathers, including George Washington, Ben Franklin, and Thomas Jefferson regularly ate and served ice cream. First Lady Dolley Madison served it at her husband's Inaugural Ball in 1813.

In 1843, the U.S. Government granted Nancy Johnson of Philadelphia a patent for a small-scale hand-cranked ice cream freezer. Eventually, the creation of the ice cream soda by Robert Green in 1874 added ice cream's popularity.

Decorative molds, enhancing ice cream's presentation at the table, appeared at fancy parties in the late 19th century, a tradition borrowed from British molded puddings. The most notable of the American mold firms were Eppelsheimer & Co., Krauss Co. and Schall & Co. However, the first ones came from European makers. Makers used pewter, white metal or tin to create a variety of forms ranging from animal, human and bird figures to floral, architectural, and holiday-oriented themes that came in various sizes.
                               
Joseph Micelli, Sr., one of the country’s premier mold makers, sculpted them with remarkable details of animals, people, flowers, fruit and even vegetables for the Eppelsheimer & Co. of New York. Their molds have E & Co NY and the mold’s catalog number stamped on the bottom.
 
The molds produced by Krauss Company, also of New York, are distinguishable by their integrated mold hinges rather than soldered hinges. 

Ice cream molds are now highly collectible. The barrel banquet mold in question above sells for around $250, but smaller ones in the shape of individual bananas, pears, peaches, and other fruit and flowers sell for $30 to $70. From the outside, these molds often look plain, but inside they include minute details. While the barrel mold was meant to be unscrewed and lifted off, most ice cream molds, as with their chocolate counterparts, have hinges that allow them to be broken open to release the creamy confection.

Beat It!

QUESTION:  My sister-in-law purchased this item at a Goodwill Store in Maine.  It measures 14 1/2 inches from end to end, and the wire part is probably 3-4 inches across. Can you tell me what it is?

ANSWER: Though what you have looks like a rug beater, it’s size says it’s a feather pillow fluffer. These are similar to carpet beaters but smaller.

From colonial times until the latter 19th century, houses has wood-plank floors and area rugs that allowed housewives and servants to easily clean them. While the floors could be swept and washed, the rugs had to betaken outdoors and beaten, thus the invention of the carpet beater, a   tool of cleanliness and torture which played a major role in housekeeping right up to the 1980s.

Most carpet beaters consisted of a handle to which the makers attached a wire or wicker pleated or knot-like loop which they often coiled or intertwined. Some had wooden handles, others did not. Early beaters had clunky designs which made it awkward for the user to beat a carpet without going into contortions. Later, makers developed more ergonomically raised handles which allowed the user to stand at an angle to beat the carpet. Shapes of carpet beaters ranged from simple arcs, triangles, rectangles, and circles to more elaborate flowers and fanciful designs like rabbits, hearts, houses, geese, and teddy bears.

Nineteenth-century country stores and later mail-order catalogs displayed a variety of carpet beaters, selling for as little as 10 cents each. Typically made of wood, rattan, cane, wicker, spring steel, or three millimeter coiled wire, the Sears Roebuck catalog offered premium versions for 45 cents each as late as their 1903 catalog. Thrift-minded rural dwellers often twisted their own beaters, attaching their creations to odd pieces of wood or pieces of old broom handles. Manufacturers such as  Woods, Sherwood and Company and the Johnson Novelty Company sold millions of them from the Civil War period to well after World War II.

Most housewives and servants beat their carpets in the backyard, limiting cleaning to good weather. Where they lived in apartments or tenements, they hung their carpets out of windows or over fire escape railings to beat them. Passers-by often had to change their route to avoid walking through a cloud of dust and dirt.

Later, companies began making less expensive beaters from rattan. These conjured up exotic locales for housewives who donned their headscarves and aprons to beat their carpets into cleanliness and their children into submission.

Housewives beat everything from carpets, rugs, clothes, cushions, and bedding, as well as their children, the former to clean them, the latter to punish them. Mothers in the Netherlands and northern Belgium used carpet beaters to discipline their children by making them bend over and spanking them on their behinds, leaving a distinctive pattern on their child's bare backside. And since they beat their rugs in their  backyards, they tended to do the same when punishing their children, thus drastically increasing the embarrassment quotient for them. This disciplinary use caused the carpet beater to become not only a symbol for good housecleaning, but also for conservative family values and child rearing, as well as a symbol of the dominant position of the mother in Dutch families.

Another side effect of the carpet beater was its ability to produce intense satisfaction in the user, especially if the person suffered from repressed rage. Wielding these wand-like devices enabled housewives to vent their frustrations on their carpets and bedding rather than their families. Perhaps that’s why there’s more family violence today with the proliferation of electric vacuum cleaners.

The modern vacuum first appeared back in the 1870s, but it wasn’t until the first decade of the 20th century that several different companies claimed they had invented the modern electrical vacuum cleaner. And while the electric vacuum cleaner took a long while to catch on, the arrival of hand carpet sweepers signaled the demise of the carpet beater, and by 1908 carpet beaters had all but disappeared from the sales catalogs. But with the onslaught of the Great Depression, carpet beaters once again gained popularity.

A variation of the carpet beater was the smaller "pillow fluffer" used to fluff feather pillows.

Carpet beaters have become a popular collectible. Before eBay, carpet beaters sold for $20-40 in antique shops and in shows. But now on eBay even the rarest ones go for just a few bucks.

Lighting Up the Night

QUESTION: The other day I was going through some old things that belonged to my father and came across what looks to be an almost brand-new Coleman lantern still in its box. Since I’m not much of a camper myself, I wondered if people collect these lanterns and if they have any value.

ANSWER: According to your photo, your lantern looks to be one made in the late 1940s. Soldiers who had fought in World War II and had used special field stoves designed and made by the Coleman Company were familiar with their products. So as they settled down to have families, they saw the need for vacations. Car camping became very popular, as these new families loaded up their station wagons and headed out to explore America.

Anyone who has gone camping knows the glow emitted from campgrounds as campers sit around their tables having dinner by the light of a Coleman lantern. Promoted as the "sunshine of the night," these lanterns have long since become essential gear to car campers.

The incandescent electric light, invented in 1879, was a long way from reaching rural America in 1900, when William C. Coleman, an itinerant salesman, first sold indoor pressurized gasoline units, which he called Efficient Lamps. Coleman had poor eyesight, and the standard lamp of that time burned kerosene and produced a smoky, flickering, yellowish light. The steady white light produced by his new lamp enabled him to read even the smallest print. Two years later he bought the manufacturing rights for the lamp, and by 1905 he had begun producing them in his Wichita, Kansas, factory.

By1909, Coleman had improved his 300-candlepower, portable table so that it provided light in every direction for 100 yards and could light the far corners of a barn. Single-handedly, he changed the way farmers worked and thus increased their productivity. His lamp became a staple in rural America, eventually transforming the local company into a national one on which people depended.

Coleman’s initial lamp featured decorative brass or nickel-plated elements that arched up around the lantern´s glass shade, providing an upper loop for hanging or grasping the lantern for barn use. Later, he designed ones with bulbous bases that could sit on tables. And like other lamps at the time, some had colorful glass shades with elaborate designs around the edges.

Coleman’s first lamps for indoor use differed from oil lamps. Each had a pressure tank that acted as its base, replacing the oil lamp's fount or reservoir. In place of the oil lamp's chimney and wick, Coleman’s lamp used a generator, which vaporized air-forced white gas. The burning vapors ignited a mantle of loosely woven fabric. Both of these features helped Coleman lamps produce 20 times more light than oil wick lamps.

By 1914, the first self-contained, portable Coleman lanterns for outdoor use—the ones so familiar to campers today—appeared on the market. He enlarged the fount so that it stored two quarts of white gas, enclosed the generator and mantles in a wind- and bug-proof glass globe, and added a bail for easy carrying and hanging.

Coleman designers continued to improve their lanterns and by the 1930s, many came with housings in   different colors. The tops of some of the lamps of this period had a green finish which eventually became the signature look of Coleman products. The company also supplied lanterns to the National Forest Service, some of which bore the familiar “NFS” insignia.

From the 1940s on, Coleman lanterns featured a forest green finish combined with shiny nickel-plated brass elements. The upper and lower parts of one of the company’s most popular and long-running lanterns, the Model 200A, produced from 1952 through 1983, are bright red.

Most people use Coleman lanterns for camping. They’re as prized now as they were decades ago for chasing darkness from a campsite. When night falls, a few strokes on the pump primes it for action. And at the touch of a match the lantern throws its magic circle of light in a 360-degree arc.

Starting in 1901, Coleman has produced close to 50 million gas lanterns. The long history and the range of styles and models makes the Coleman lantern a popular collectible that’s affordable for most collectors. A Coleman lantern can sell today for $20 to $400, depending on its age, condition, and rarity.

Superman Returns Again...and Again...and Again

QUESTION: When I was a kid, I had a Superman lunchbox. Over the years, I forgot all about it, but recently, as I was going through some boxes in my attic, I discovered it again. If I remember correctly, it’s from 1954. Can you tell me anything about it and does it have any value or should I just put it out with the trash?

ANSWER: You had better take a closer look at that old lunchbox before you toss it out. This particular metal lunchbox, which includes a thermos bottle, depicts Superman doing battle with a robot and inclusive of the original thermos. One like it is presently for sale on eBay for $2,150. The lunchbox, considered rarer than most, joins other Superman collectibles, many of which have gone up in value in recent years. This is particularly the situation when it comes to rare Superman comic books. Depending on their condition and scarcity, the classic ones often fetch big bucks. The 64-page first edition from 1939, containing The Complete Story of the Daring Exploits of the One and Only Superman, including the four Superman stories from Action Comics No. 1-4, sold at auction for $26,000.01 a few years ago. And just the Action Comics #1 sold for $1 million in February 2010.

American writer Jerry Siegel and Canadian-born American artist Joe Shuster created Superman in 1932 while both were living in Cleveland, Ohio. Detective Comics, Inc., later D.C. Comics, bought the rights to the Superman story and debuted him in June of 1938 in Action Comics #1. At the time, America needed some type of hero, even a make-believe one. The Great Depression, a devastating Great Plains drought, and a swelling uneasiness about Nazism had wrenched people's spirits. The arrival of the "Man of Steel" offered a welcome fantasy for kids disheartened by the country’s dismal state of affairs. Over the decades, he subsequently appeared in various radio serials, television programs, films, newspaper strips, and video games.

Widely considered to be an American cultural icon, Superman helped to create the superhero genre and establish its primacy within the American comic book. The character's distinctive blue, red and yellow costume, is said to have been influenced by such comic book characters as Flash Gordon and that of circus strongmen.

Rocketed to Earth as an infant by his scientist father moments before his home planet’s destruction, he was discovered and adopted by a Kansas farmer and his wife, then raised as Clark Kent who later became Superman’s alter ego.

Siegel and Shuster envisioned their character as one who would right wrongs, fighting for social justice and against tyranny. In the original stories, Siegel and Shuster made Superman rough and aggressive. The character attacked and terrorized wife beaters, profiteers, gangsters. Later writers have softened the character and instilled a sense of idealism and moral code of conduct. Although not as cold-blooded as the early Batman, the Superman featured in the comics of the 1930s is unconcerned about the harm his strength may cause, tossing villainous characters in such a manner that fatalities would presumably occur, although these were seldom shown explicitly on the page. By late 1940, editor Whitney Ellsworth instituted a code of conduct that banned Superman from ever killing again.

Today, Superman is commonly seen as a brave and kind-hearted hero with a strong sense of justice, morality and righteousness. After all, he’s the hero of a younger age group. Young people got hooked on Superman's exploits right away. Tales of his origin, superhuman powers and good-over-evil conquest' adventures were just part of the enticement. His, alter-ego as mild-mannered reporter Clark Kent with love interest Lois Lane added human interest to the stories as well.

With the release of the next Superman film, there will be another deluge of Superman collectibles. Currently, there are nearly 131,000 Superman items up for auction, in both vintage and newer examples. There’s a huge array of Superman collectibles available to collectors, ranging from toys, games, dolls, lunchboxes; jewelry, clothing and watches to electronics, wall art, statues, records and DVDs.

The earliest paraphernalia, a button proclaiming membership in the Supermen of America club, appeared in 1939. By 1940 the amount of merchandise available increased dramatically, with jigsaw puzzles, paper dolls, bubble gum and trading cards available, as well as wooden or metal figures. By 1942, the character of Superman had been licensed to appear in other media, and the popularity of such merchandise increased. A surge of popularity seems to occur after the opening of each Superman film. The most popular Superman items on eBay seem to be from 1954, 1967, 1978, 1984, and 1998. 

Lunchboxes appeared from 1954 onward. A number of companies, including Adco, Hallmark, Thermos, King-Seeley, and Aladdin made them in either metal or plastic. While most are rectangular, there are some working-man dome-style ones.

Postcards From the Attic

QUESTION: My grandfather collected postcards for years. Now I have his collection. While it’s great to look at, I have no idea of where to start finding out about the hundreds of cards he collected. Can you please help me?

ANSWER: To begin, deltiology—postcard collecting—is one of the fastest growing hobbies in the world. Most people collect postcards for four reasons: (1) Nostagia. Many older collectors seek out pictures of “the good ole days” or "the way it used to be.” Younger ones seek out the places or characters from their childhood. (2) Cost. Many items have soared in price, but postcards can still be obtained for from 10-cents to $10 each. (3) Investment. Postcards that sold for 10 cents less than 10 years ago now bring $1 to $5 and more. (4) Art and printing. The art on a postcard often determined the printing process and vice versa, from the lithochromes of the 1890's to the photochromes (photo cards) of today.

There are still many millions of postcards packed away in attics. Many, neatly tucked away in albums for the last 90-100 years, are in pristine condition. When postcards sold for 1 cent to 10 cents each, not very many people thought it worthwhile to search a dusty attic for them. Today, that’s all changed.

You’ll find postcards for sale at garage sales, flea markets, antique shops, and stamp shows. The most popular ones are the “hometown views.” Many show main streets with gas lights, trolleys, horse-drawn vehicles, store signs, sidewalk sales, bustles, hoopskirts, knickers, hightop shoes, and Model-T Fords. Those who collect for nostalgic reasons love these.

Then there are those from family vacations and foreign tours. Those who travel frequently often bring back views of the places they’ve been on postcards to put into albums either in place of their own photographs or in addition to them. They could pick up free cards from motels, hotels, resorts, and restaurants and, of course, purchase many scenic view cards of popular vacation spots. In fact, the act of sending picture postcards to the folks back home began as an American pastime.

And you shouldn’t ignore the greeting postcards, sent by Victorians in the latter part of the 19th century to express holiday and birthday greetings.

Postcard collecting was a huge craze in the early 20th century, with peak years running from about 1907 to 1913. People used these cards to keep in touch with friends and family, much as people use Facebook today. Couples courted using postcards and strangers met other strangers in foreign countries. By the end of the peak period in 1913, people had sent over 968,000,000 postcards. If even a fraction of all those cards have made it into the hands of dealers, the supply would be overwhelming. In fact, because so many have come into the market, the price for most postcards remains relatively reasonable.

Most collectors seem to collected cards for their pictorial value and not as much for their condition. During the peak years, many seemed willing to pay a few cents for old cards, focusing on topics like bridges and courthouses which are of little interest today. And with over 120 different topics to choose from, it’s no wonder that the hobby has grown so much.

Many collectors refused to consider any card made after 1920. They especially liked photographic postcards for their historical significance. Mid-20th-century roadside and local views have now increased in popularity and price. And it’s become difficult to find city views from the 1940s and 1950s.

Dating used postcards is simple—just check the postmark on back. However, it can be harder to figure the date of unused ones. Early cards from before 1900 to 1918 have good detail and no border.

Those with a white border date from 1919 to 1932. Most of the cards were view cards which were often pale with low contrast. Paper stock at the time had a coated surface, resulting in a dull, flat  appearance. 

Linen texture-cards dominated the market from 1933 until the early 1950's. The majority of view cards from this era are boring and unattractive, especially those featuring scenery because the linen texture actually took away from the picture. Real photos of tourist areas were also fairly common. Photographic cards from this time are generally glossier and more contrasty than earlier ones and have titles in white letters close to the bottom of the picture.

As with postage stamps, the condition of a postcard falls into one of six categories—mint, near mint, excellent, very good, good, and fair. Cards in the last condition aren’t considered collectible unless they’re very rare.

To find out more about your cards and to maintain and grow your collection, you might want to join one of over 70 postcard clubs in the U.S. Most of these clubs issue bulletins that have valuable postcard information, stories, and pictures. Even if a club isn’t close enough to make it convenient for you to attend meetings, it’s worth joining, if only for the bulletins and membership rosters, so that you can begin trading with other members.

The Sleeping Chayre

QUESTION: Recently I purchased an old wingback chair at a local antique shop. It seems very old to me since it has ball and claw feet, plus it’s upholstery looks good but older in style, leading me to believe it had been done long ago. But I’m puzzled about the springs supporting the upper pillow. Perhaps they were also added at a later time. Can you tell me more about this type of chair and how old this one might be?

ANSWER: Unfortunately, your wing chair isn’t as old as you think. It dates from the Great Depression of the 1930s and would be considered a Colonial Revival piece. What led you to believe the chair was older were its ball and claw feet, made popular by Thomas Chippendale in the mid-18th century in England.

The Chippendale style of furniture remained popular until the end of the 18th century when interest in it disappeared until the Centennial Exposition in Philadelphia in 1876. The fair inspired furniture makers to re-create the styles of the American Colonial Period until all such furniture became known as Colonial Revival or just “period” furniture. Chippendale created chair designs for comfort, unlike the still, but stylish designs of Federal ones. His wingback chair offered the ultimate in comfort.

But where did the idea for a chair with wings originate? As early as the 17th century, people living in cold weather areas gathered by their fireplaces on crude wooden benches to keep warm. As the century progressed cabinetmakers added high backs with small wings to these benches. While they were functional, they were far from comfortable.

Furniture historians believe they originally intended the wings to prevent drafts from reaching the upper body of those who sat in these chairs. The chairs also prevented the immense heat a roaring fireplace fire from affecting the makeup of ladies who might be sitting too close to it. Makeup then was clay-based and tended to run when heated.

Unlike other chairs, wingbacks offered a greater level of comfort and beauty. With the onset of the 18-century, chairmakers began incorporating upholstery into their wingbacks. Chippendale molded the wingback design by adding elegant frames such as oversized wings and scrolling arms to offset the upholstery. However, most of his designs did not have a pillow seat. Instead, the upholstery was stretched over the springs and small amount of padding. The “knees” of the chair were also chunkier and lower to the ground than those of Sheraton and Hepplewhite.

Also called fireside chairs, wingbacks allowed a person sitting by the fireside to catch the heat while eliminating cold drafts from creeping around their back or sides, so chairmakers developed a new kind of chair known as the “Sleeping Chayre.” Not only did this chair have wings, enabling the sitter to stay warm, it’s back could also rachet to different angles for sleeping.

This led to an unusual use in the 18th century. Respiratory diseases were rampant back then, and people commonly believed that it was better for the sick person to sit up to prevent fluid from accumulating in their lungs. So wingback chairs eventually found a home by the fireplace in American Colonial bedrooms.

It was often common to find two of these chairs—one for the master and one for the mistress of the house—facing a small round table by the fireplace in the master bedroom of the house. Colonial couples often took their supper, known back then as “high tea,” in the warmth and comfort of their bedroom rather than in the drafty dining room downstairs.

Towards the 19-century, chairmakers generously stuffed wingbacks with horsehair for an added dose of padding. Covered in velvet or needlework to imitate contemporary French styles, they sported bright patterns and ornate fabric embellishments.